SO4^2—／ZrO2超强酸催化剂的XPS研究

对ＸＰＳ技术对不同焙烧温度，不同Ｈ２ＳＯ４浓度制得的ＳＯ４＾２－／ＺｒＯ２和不同反应温度下反应后ＳＯ４＾２－／ＺｒＯ２超强酸催化剂的表面元素电子结合能及表面元素的相对含量进行了分析。结果表明，焙烧温度和反应温度对催化剂表面元素Ｚｒ，Ｏ，Ｓ的氧化态没有影响，但Ｚｒ，Ｏ的电子结合能随温度的升高而下降；Ｏ（－２）至少可归结为三种存在形式的氧；ＳＯ４＾２－可以在催化剂表面富集，且当Ｈ２ＳＯ４浓度为０．５ｍ     

新型固体酸催化剂SO42-/Fe2O3-ZrO2-SiO2的研究

研制了新型三元ＷＯ４＾２－／ＦｅｗＯ３－ＺｒＯ２－ＳｉＯ２固体酸催化剂并用于催化剂并用于催化乙酸／丁醇酯化反应;考察了制备方法、Ｆｅ,Ｚｒ摩尔比、Ｓｉ原子百分含量、沉淀ｐＨ值、陈化时间、预焙烧温度、浸渍液Ｈ２ＳＯ４溶液浓度、焙烧温度、焙烧气氛等对催化性能的影响。实验结果表明,使用Ｓｉ含量为２％,ｍｏｌＦｅ：ｍｏｌＺｒ＝０．２５由共沉淀－浸渍法在氧气气氛中制得的该类催化剂,乙酸的转化率、乙酸丁酯收率     

新型固体酸SO_4~(2-)/Fe_2O~3-ZrO_2-SiO_2的研制及其对乙酸/丁醇酯化反应酸催化作用的优化(英文)

采用共沉淀法与浸渍法制备了一系列ＳＯ４２－／Ｆｅ２Ｏ３－ＺｒＯ２－ＳｉＯ２固体酸催化剂,并将其用于催化乙酸／丁醉酯化反应。考察了以下影响催化剂活性的因素：Ｆｅ／Ｚｒ比、Ｓｉ含量、制备方法、预焙烧温度和焙烧温度等。催化剂采用如下条件制备： Ｓｉ含量为２ ％, Ｆｅ／Ｚｒ比为 ０．２５,共沉淀法, ７７３ Ｋ焙烧,此时酯收率及生成酯的选择性可分别达到９３.２６％和９６.０１％。 ＳＯ４２可能是活性组分之一。     

ZrO2及SO^2—4／ZrO2超强酸催化剂的XRD分析

用ＸＲＤ技术从定性和定量上对ＺｒＯ２，特别是ＳＯ＾２－４／ＺｒＯ２超强酸催化剂的物相和四方相ＺｒＯ２的含量进行了详细的考察。结果表明，ＳＯ＾２－４的引入使ＳＯ＾２－４／ＺｒＯ２的晶化温度比ＺｒＯ２大约提高了１００Ｋ，并且使亚稳态四方相ＺｒＯ２得以稳定。亚稳态四方相ＺｒＯ２的含量主要受处理液浓度和焙烧温度的影响。处理液浓度越大，四方相含量越高；焙烧温度越高；四方相含量越低。强酸性的Ｈ２ＳＯ４溶液比弱     

SO4^2—／ZrO2和SO4^2—／Al2O3—ZrO催化剂上的正戊烷反应

研究了添加Ａｌ对ＳＯ４＾２－／ＺｒＯ２超强酸样品的晶化,比表面、硫含量、超强酸性和正戊烷反应性能的影响,考察了活化温度、反应温度、Ａｌ含量和载Ｐｔ对催化剂活性和选择性的影响。ＳＯ４＾２／Ａｌ２Ｏ３－ＺｒＯ２催化剂的酸强度与ＳＯ４＾２－／ＺｒＯ２基本相当,但超强酸位经后者多,未载Ｐｔ时正戊烷反应活性和稳定性明显高于后者,负载Ｐｔ后,正戊烷异构化选择性和稳定性大大提高,但Ｐｔ／ＳＯ４＾２－／Ａｌ２Ｏ３     

SO^2—4／ZrO2超强酸制备方法的改进

用ＢＥＴ、ＸＲＤ、流动指法剂法、化学分析、低温正丁烷异构化反应等手段研究了制备条件对ＺｒＯ２前驱体和ＳＯ＾２－４／ＺｒＯ２超强酸性能的影响。实验结果表明，采用不同的制备条件，ＺｒＯ２前驱体的比表面可相差１．８倍，ＳＯ＾２－４／ＺｒＯ２的酸强度相差约１０００倍，ＳＯ＾２－４／ＺｒＯ２的正丁烷异构化反应活性相差约３００倍，ＺｒＯ２最高比表面可达２４５ｍ＾２／ｇ，ＳＯ＾２－４／ＺｒＯ２酸强度为Ｈ０≤－１     

HZSM一5与ZnO／SiO_2的固相反应

以乙烯、乙烷为探针反应分子，以混合不同锌含量的ＺｎＯ／ＳｉＯ＿２，与ＨＺＳＭ－５为催化剂，在不同处理条件与不同混合方式（直接混合或机械研磨）下研究高温焙烧的俗化剂对乙烯、乙烷芳构化反应的影响。考察了不同含量的Ｚｎ／ＨＺＳＭ－５上Ｃ＿２Ｈ＿４、Ｃ＿２Ｈ＿６的芳构化反应及ＮａＨＺＳＭ－５与ＺｎＯ／ＳｉＯ＿２和ＮａＺｎＨＺＳＭ－５与ＺｎＯ／ＳｉＯ＿２混合催化剂高温焙烧后的Ｃ＿２Ｈ＿４芳构化反应。发现Ｚｎ／ＨＺＳＭ－５是一种双功能催化剂，乙烯、乙烷芳构化反应的活性和选择性均与Ｚｎ／ＨＺＳＭ－５的双中心Ｚｎ￣（２＋）和Ｂ酸的相互匹配有密切关系，Ｂ酸和Ｚｎ￣（２＋）存在最合适匹配。而ＮＺＳＭ－５与ＺｎＯ／ＳｉＯ＿２合催化剂高温焙烧后具有Ｚｎ／ＨＺＳＭ－５的双功能性，ＨＺＳＭ－５与ＺｎＯ／ＳｉＯ＿２在高温下发生了固相反应。     

SO_4~（2－）／ZrO_2超强酸催化剂的XPS研究

用ＸＰＳ技术对不同焙烧温度、不同Ｈ＿２ＳＯ＿４浓度制得的／ＺｒＯ＿２和不同反应温度下反应后／ＺｒＯ＿２超强酸催化剂的表面元素电子结合能及表面元素的相对含量进行了分析。结果表明，焙烧温度和反应温度对催化剂表面元素Ｚｒ、Ｏ和Ｓ的氧化态没有影响，但Ｚｒ和Ｏ的电子结合能随温度的升高而下降；Ｏ（－２）至少可归结为三种存在形式的氧；可以在催化剂表面富集，且当Ｈ＿２ＳＯ＿４浓度为０．５ｍｏｌ／Ｌ时，表面富集最显著；Ｈ＿２ＳＯ＿４浓度为１ｍｏｌ／Ｌ时，催化剂表面和总体含硫量都较高；太低和太高的Ｈ＿２ＳＯ＿４浓度时，催化剂表面和总体含硫量都很低。当焙烧温度高至８５３Ｋ或反应温度高至６２３Ｋ以后，催化剂表面含硫量迅速下降。此外，还对催化剂表面的Ｂｒｏｎｓｔｅｄ酸中心的存在形式和催化剂的失活进行了探讨。     

HZSM—5与ZnO／SiO2的固相反应

以乙烯、乙烷为探针反应分子，以混合不同锌含量的ＺｎＯ／ＳｉＯ２与ＨＺＳＭ－５为催化剂，在不同处理条件与不同混合方式（直接混合或机械研磨）下研究高温焙烧的催化剂对乙烯、乙烷芳构化反应的影响。考察了不同含量的Ｚｎ／ＨＺＳＭ－５上Ｃ２Ｈ４、Ｃ２Ｈ６的芳构化反应及ＮａＨＺＳＭ－５与ＺｎＯ／ＳｉＯ２和ＮａＺｎＨＺＳＭ－５与ＺｎＯ／ＳｉＯ２混合催化剂高温焙烧后的Ｃ２Ｈ４芳构化反应。发现Ｚｎ／ＨＺＳＭ－５是一种     

SO^2—4／TiO2和SO^2—4／Fe2O3固体超强酸研究

用ＸＲＤ、ＴＧ－ＤＴＧ、ＳＥＭ和化学分析等手段研究了浸渍Ｈ２ＳＯ４的无定形ＴｉＯ２和Ｆｅ２Ｏ３在焙烧过程中的晶化、相变、失水及失硫情况，总结出ＳＯ＾２－４／ＭｘＯｙ型固体超强酸具有与ＳＯ＾２－４／ＺｒＯ２体系相同的形成规律。用ＩＲ光谱和常温正戊烷异构化反应对ＳＯ＾２－４／ＴｉＯ２／Ｆｅ２Ｏ３的超强酸性进行了表征，表明它们与ＳＯ＾２－４／ＺｒＯ２体系具有相似的表面酸位结构，无水状态主要为Ｌ酸位，吸水     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.