Modelling the fractionation process in TREF systems: Thermodynamic simple approach

A simple thermodynamic model, based on an extension of Flory-Huggins theory, is applied to temperature rising elution fractionation (TREF). Dependence of the fractionation process on melting temperature, melting enthalpy, average crystallinity, average crystallizable sequence length, and polymer-solvent interaction parameter is predicted. Results from the model fit experimental TREF data, and correctly predict number-average branch points for TREF fractions. © 1995 John Wiley & Sons, Inc.     

Graft and block copolymers with polysiloxane and vinyl polymer segments

A convenient new process to make silicone/organic block and graft copolymers has been recently demonstrated. This dual copolymerization process combines conventional condensation polymerization of the siloxane segments with free radical polymerization of the organic vinyl polymer segments. The copolymerization process is relatively simple and economical compared with other copolymerization techniques as it uses commonly available starting materials and available process equipment. Silicone segments containing alkene side chains or end-groups are prepared in the usual way by polycondensation using an acid or base catalyst. The double bonds of the alkene groups are oxidized to carbonyls which are then used to initiate vinyl monomer polymerization and link the siloxane with the vinyl segments. This initiation step is based on a redox system of copper^(II) salts which generates free radicals on the alpha carbons next to the carbonyl groups. This copolymerization process is relatively fast and proceeds at high yields.     

The influence of confinement and curvature on the morphology of block copolymers

In the bulk, at equilibrium, diblock copolymers microphase separated into nanoscopic morphologies ranging from body-centered cubic arrays of spheres to hexagonally packed cylinders to alternating lamellae, depending on the volume fraction of the components. However, when the block copolymers are forced into cylindrical pores, where the diameter of the pores are only several repeat periods of the copolymer morphology or less, then commensurability of the copolymer period and the pore diameter can impose a frustration on the microdomain morphology. In addition, due to the small pore diameter, a curvature is forced on the microdomain morphology. In combination with interfacial interactions between the blocks of the copolymer and the pore walls, the preferential segregation of one component to the walls, spatial confinement and forced curvature are shown to induce transitions in the fundamental morphology of the copolymers seen in the bulk. Lamellar morphologies transformed into torus-type morphologies, cylinders are forced into helices, and body-centered cubic arrays of spheres are force into helical arrays of spheres due to these restraints. The novel morphologies, not accesssible in the bulk, open a large array of nanoscopic structures that can be used as templates and scaffolds for the fabrication of inorganic nanostructured materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3377–3383, 2005     

Conducting graft copolymers of pyrrole and thiophene with random copolymers of methyl methacrylate and 3-methylthienyl methacrylate

Random copolymers of 3-methyl thienylmethacrylate and methyl methacrylate were synthesized via free radical polymerization. Electro-copolymerizations of random copolymers with thiophene and/or pyrrole were carried out in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB), water-p-toluene sulfonic acid (PTSA) solvent-electrolyte couples. Oxidative polymerization of thiophene functionalized random copolymer was also achieved by constant current electrolysis and chemical polymerization. The characterizations were done by conductivity measurements, cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermal gravimetry analysis (TGA), scanning electron microscopy (SEM).     

Synthesis and characterization of polysiloxane–polyamide block and graft copolymers

The synthesis of copolymers constituted of a central polydimethylsiloxane (PDMS) block flanked by two polyamide (PA) sequences is described. α, ω-diacyllactam PDMS, when used as macroinitiator of lactam polymerization, gives rise to the expected triblock copolymer. Likewise, PDMS-g-PA graft copolymers are obtained from acyllactam containing polysiloxanes. NaAlH₂(OCH₂CH₂OMe)₂ turns out to be the best suited activating agent for the polymerization of ?-caprolactam, in the experimental conditions required for the synthesis of polysiloxane–polyamide copolymers. The nucleophilic species formed by reaction of NaAlH₂(OCH₂CH₂OMe)₂ with ?-caprolactam—2-[bis(methoxyethoxy) aluminumoxy]-1-azacycloheptane sodium—is indeed nucleophilic enough to bring about the growth of PA chains and mild enough to stay inert towards PDMS. © 1993 John Wiley & Sons, Inc.     

梯度共聚物研究进展

梯度共聚物是一类新型的聚合物,其具有与嵌段共聚物相似的丰富性质,但是合成相对简便,更易于大规模生产进而实现产业化,因此备受关注。 本文从梯度共聚物的定义与结构特点、合成与表征、自组装行为、性质及应用等几个方面综述梯度共聚物当前研究现状,展望其发展方向。     

Aqueous solution properties of pH‐responsive AB diblock acrylamido–styrenic copolymers synthesized via aqueous reversible addition–fragmentation chain transfer

Here we report the synthesis and solution characterization of a novel series of AB diblock copolymers with neutral, water‐soluble A blocks consisting of N,N‐dimethylacrylamide and pH‐responsive B blocks of N,N‐dimethylvinylbenzylamine. To our knowledge, this represents the first example of an acrylamido–styrenic block copolymer prepared directly in a homogeneous aqueous solution. The best blocking order [with poly(N,N‐dimethylacrylamide) as a macro‐chain‐transfer agent] yielded well‐defined block copolymers with minimal homopolymer impurities. The reversible aggregation of these block copolymers in aqueous media was studied with ¹H NMR spectroscopy and dynamic light scattering. Finally, an example of core‐crosslinked micelles was demonstrated by the addition of a difunctional crosslinking agent to a micellar solution of the parent block copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1724–1734, 2004     

Practical implementation of order parameter calculation for directed assembly of block copolymer thin films

A computational procedure is presented to quantify the order achieved in assembled block copolymer films when no disruptive defects are present (i.e., dislocations or disclinations). Both simulated and real systems were used to show that sub‐nm variation in the domain position, as well as the corresponding reciprocal lattice vectors, can reduce the accuracy in the quantification of the order of the system. The computational procedure in this work was based on fitting to the measured spatial location of the domain centroids, and incorporated a tolerance factor to account for domain position variation. The procedure was used to analyze the translational and orientational order parameters of block copolymer films assembled on a chemical pattern as well as their corresponding autocorrelation functions. The procedure was applied to a patterned substrate during three stages of a template forming process: an e‐beamed patterned photoresist, the domains of a block copolymer directed to assemble on this pattern, and the underlying structure after lift‐off. Use of the procedure demonstrated that the order of the block copolymer film could be retained in subsequent processing of the underlying template. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Conducting graft copolymers of poly(3‐methylthienyl methacrylate) with pyrrole and thiophene

A thiophene‐functionalized methacrylate monomer (3‐methylthienyl methacrylate) was synthesized via the esterification of 3‐thiophene methanol with methacryloyl chloride. The methacrylate monomer was polymerized by free‐radical polymerization in the presence of azobisisobutyronitrile as the initiator. Graft copolymers of poly(3‐methylthienyl methacrylate) (PMTM2) and polypyrrole and of PMTM2 and polythiophene were synthesized by constant‐potential electrolyses. p‐Toluene sulfonic acid, sodium dodecyl sulfate, and tetrabutylammonium tetrafluoroborate were used as the supporting electrolytes. PMTM2‐coated platinum electrodes were used as anodes in the polymerization of pyrrole and thiophene. Moreover, the oxidative polymerization of poly(3‐methylthienyl methacrylate) (PMTM1) was studied with FeCl₃ as the oxidant. The self‐polymerization of PMTM1 was also investigated by galvanostatic electrolysis both in dichloromethane and in propylene carbonate. The structures of PMTM1 and PMTM2 were investigated by several spectroscopic and thermal methods. The grafting process was elucidated with conductivity measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4131–4140, 2002     

Cyclic Acetal-Photosensitized Polymerization. XI. Photoirradiations onto Polycyclic Acetals

Photoirradiations onto polycyclic acetals, i. e., polymers containing cyclic acetal groups in the molecule, were carried out at 30 or 40°C. The terpolymer of vinyl formal/vinyl acetate/vinyl alcohol (PVFAcA) was decomposed by means of irradiation, while poly-2-vinyl-1,3-dioxolane (PVDO) and poly-2-vinyl-4-hydroxy-methyl-1,3-dioxolane (PVHDO) were crosslinked. These results indicate the possibility of control of the decomposition or the crosslinking of polymer.     

(Hetero) Arylene Polymers Having Polystyrene Chains as Branches

Summary : Four monomers; 1,4-bis(1-naphthyl) benzene ( 5 and 7 ) and 1,4-bis(2- thienyl)benzene ( 6 and 8 ) containing one or two polystyrene short chains substituted in 2 or 2, 5 positions of central phenylene ring were synthesized by Suzuki coupling reaction of two polystyrene based macromonomers ( 3 and 4 ) with 1-naphthalene- and 2-thiophene boronic acid, respectively. By chemical oxidative polymerization using FeCl₃ as oxidant, copolymers containing alternating phenylene and binaphthyl ( 9 , 11 ) or phenylene and bithienyl groups ( 10 , 12 ) and polystyrene as side chains have obtained. The exact control of polystyrene branch length was performed by atom transfer radical polymerization of styrene using as initiators 1,4 dibromo-2-(bromomethyl)benzene ( 1 ) and 1,4-dibromo-2,5 di(bromomethyl)benzene ( 2 ). Polymers were characterized by FT-IR, ¹H-NMR, UV and fluorescence spectroscopy and thermal methods.     

Homogeneous polyesters of predetermined length,composition, and sequence: Model synthesis of alternating glycolic-acid-co-(L)-lactic-acid oligomers

Methods for making monodisperse polyester copolymers of predetermined length, com-position, and sequence are reported. Alternating oligomers of (L)-lactic-co-glycolic acid (La-co-Gl), isosteric with polypeptides, are prepared by solution methods of protecting, coupling, and deprotecting alcohol and acid groups. The carboxylic acid is protected by benzyl ester formation and released by hydrogenation. The hydroxyl group is protected as the methoxyethoxyethyl ether and deprotected with sodium iodide and trimethylsilyl chlo-ride. Coupling uses dicyclohexylcarbodiimide. End-capped alternating oligomers containing ? (GILa)₄? and ? (GILa)₈? show polymer properties. They are noncrystalline oils that exhibit discernable T_g. The conformation of ? GILa? and ? LaGl? diads in the polyesters is shown to be similar to isosteric peptide diads ? GlyAla? and ? AlaGly? . Exactly structured, monodisperse polyesters suggest a chemical parallel to proteins. Designed struc-tural templates combining sheet-form ? (Gl)_n? and helical ? (La)_n? segments are at-tractive synthesis targets. The solution preparations reported here can be applied, but it is suggested that biosynthetic methods for introducing single ester units into peptide chains be adapted to synthesize precisely fashioned polyesters. © 1995 John Wiley & Sons, Inc.     

Thermal decomposition of copolymers from ethylene with some vinyl derivatives

The thermal degradation of ethylene-vinyl acetate (EVA), ethylene-vinyl-3,5-dinitrobenzoate (EVDNB) and ethylene-vinyl alcohol (EVAL) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that EVA copolymers are thermally more stable than EVDNB samples. The degradation of the copolymers considered occurs as an additive degradation of each component polyethylene (PE) and poly(vinyl acetate) (PVA), poly(vinyl-3,5-dinitrobenzoate) (PVDNB) or poly(vinyl alcohol) (PVAL). The apparent activation energy of the decomposition was determined by the Kissinger and Flynn-Wall methods which agree well.     

Synthesis of arborescent polystyrene‐g‐[poly(2‐vinylpyridine)‐b‐polystyrene] core–shell–corona copolymers

Arborescent copolymers with a core‐shell‐corona (CSC) architecture, incorporating a polystyrene (PS) core, an inner shell of poly(2‐vinylpyridine), P2VP, and a corona of PS chains, were obtained by anionic polymerization and grafting. Living PS‐b‐P2VP‐Li block copolymers serving as side chains were obtained by capping polystyryllithium with 1,1‐diphenylethylene before adding 2‐vinylpyridine. A linear or arborescent (generation G0 – G3) PS substrate, randomly functionalized with acetyl or chloromethyl coupling sites, was then added to the PS‐b‐P2VP‐Li solution for the grafting reaction. The grafting yield and the coupling efficiency observed in the synthesis of the arborescent PS‐g‐(P2VP‐b‐PS) copolymers were much lower than for analogous coupling reactions previously used to synthesize arborescent PS homopolymers and PS‐g‐P2VP copolymers from the same types of coupling sites. It was determined from static and dynamic light scattering analysis that PS‐b‐P2VP formed aggregates in THF, the solvent used for the synthesis. This presumably hindered coupling of the macroanions with the substrate, and explains the low grafting yield and coupling efficiency observed in these reactions. Purification of the crude products was also problematic due to the amphipolar character of the CSC copolymers and the block copolymer contaminant. A new fractionation method by cloud‐point centrifugation was developed to purify copolymers of generations G1 and above. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1075–1085     

Investigation by combined solid‐state NMR and SAXS methods of the morphology and domain size in polystyrene‐b‐polyethylene oxide‐b‐polystyrene triblock copolymers

The microphase structure of a series of polystyrene‐b‐polyethylene oxide‐b‐polystyrene (SEOS) triblock copolymers with different compositions and molecular weights has been studied by solid‐state NMR, DSC, wide and small angle X‐ray scattering (WAXS and SAXS). WAXS and DSC measurements were used to detect the presence of crystalline domains of polyethylene‐oxide (PEO) blocks at room temperature as a function of the copolymer chemical composition. Furthermore, DSC experiments allowed the determination of the melting temperatures of the crystalline part of the PEO blocks. SAXS measurements, performed above and below the melting temperature of the PEO blocks, revealed the formation of periodic structures, but the absence or the weakness of high order reflections peaks did not allow a clear assessment of the morphological structure of the copolymers. This information was inferred by combining the results obtained by SAXS and ¹H NMR spin diffusion experiments, which also provided an estimation of the size of the dispersed phases of the nanostructured copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 55–64, 2010     

Structure of Styrene and Acrylate Block Copolymers

Abstract

Using UV light as the energy source and polystyrene- (PS-) or polymethyl methacrylate- (PMMA-) macroinitiators with active aromatic or aliphatic thiyl end groups, PS-PMMA and PMMA-PEA (poly-ethyl acrylate) block copolymers were synthesized. The molecular weights of both block copolymers increased with increasing reaction time. The reactivity of macroinitiators depended on the type of thiyl groups and monomer and not on the length of the polymer chain. The most reactive were macroinitiators containing resonance stabilized non-substituted or substituted aromatic end groups. The decomposition of the macroinitiators took place over the formation of the thiyl radical and macroradical. The bond length, the bond dissociation energy, and the bond order of macroradical end groups were calculated. The most reactive monomer was ethyl acrylate; the less reactive was styrene. The structure, the molecular weight, and the T _g of the styrene-acrylate block copolymers were determined. The PMMA/PEA block copolymer had two of block's T _g s, the first at 105°C, the second at ?24°C, and a third at 16°C which probably represents contacting segments.     

Deformation of elastomeric polyolefin spherulites

The ethylene‐octene block copolymers in this study consist of long crystallizable sequences with low comonomer content alternating with rubbery amorphous blocks with high comonomer content. The crystallizable blocks form lamellae that organize into space‐filling spherulites even when the fraction of crystallizable block is so low that the crystallinity is only 7%. These unusual spherulites are highly elastic and recover from strains as high as 300%. This new class of thermoplastic elastomers is fundamentally different from conventional elastomeric olefin copolymers that depend on isolated, fringed micellar‐like crystals to provide the junctions for the elastomeric network. The elastomeric block copolymers are shown to be unique in that a hierarchical organization of space‐filling lamellar spherulites provides the junctions for the elastomeric network. The deformation of the elastic spherulites is readily studied with small angle light scattering, wide angle X‐ray diffractograms, and atomic force microscopy. At strains in excess of 300%, the spherulites break up into a fibrillar structure following lamellar deformation processes that are similar to those established for high density ethylenic polymers. The crystalline transformation produces a stiffer elastomer that exhibits complete recovery on subsequent loadings. Similar experiments on elastomeric random ethylene‐octene copolymers where fringed micellar crystals provide the physical crosslinks that connect the rubbery, amorphous chain segments reveal significant differences. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1313–1330, 2009     

Amphiphilic liquid‐crystalline 4‐miktoarm star copolymers with a siloxane junction leading to cylindrically nanostructured templates for a siloxane‐based nanodot array

Well‐defined A₃B‐, A₂B₂‐, and AB₃‐type 4‐miktoarm star copolymers (M_n = 10,500–16,200, M_w/M_n = 1.16–1.18) consisting of poly(ethylene oxide) (PEO) and polymethacrylate bearing an azobenzene mesogen (PMA(Az)) as the arms and cyclotetrasiloxane as the core unit were synthesized using a combined route composed of a thiol‐ene click reaction and atom transfer radical polymerization. Microphase‐separated structures of the star copolymers in thin films with a thickness of approximately 100 nm were investigated by GISAXS and TEM. The A₃B‐type star‐(PEO)₃[PMA(Az)]₁ copolymer formed a more highly ordered PEO cylinder array with perpendicular alignment in the PMA(Az) matrix than that of the corresponding linear‐type block copolymer. The center‐to‐center distance of the PEO cylinders and the cylinder diameter were 13 and 4 nm, respectively. The highly ordered star‐(PEO)₃[PMA(Az)]₁ thin film was directly transferred to a siloxane‐based nanodot array by oxygen reactive ion etching. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1175–1188     

4-PEG接枝苯乙烯-马来酸酐交替共聚物的合成及功能化

采用普通自由基聚合和可逆加成一断裂链转移（RAFT）自由基聚合方法合成了对位PEG取代苯乙烯（PEG-g-St）和马来酸酐的交替共聚物（P（（PEG—g—St）-alt-MA））,”CNMR分析表明PEG-g-St和马来酸酐单元采取交替的序列结构．利用反应性基团-马来酸酐单元的水解以及胺解可以制备功能性的PEG聚合物．以月桂胺为模型小分子研究了该聚合物的胺解,得到4-PEG-苯乙烯与羧酸基团以及疏水烷烃的交替序列聚合物,该双亲聚合物在水溶液中形成组装体．     

Multicomponent Polymers of Poly(Lactic Acid) Macromonomers with Methacrylate Terminal and Copolymers of Poly(2-Hydroxyethyl Methacrylate)

Abstract

Poly(lactic acid) macromonomers with methacrylate terminal functionality have been synthesized from the cyclic dimer of lactic acid (referred to as lactide) with 2-hydroxyethyl methacrylate (HEMA) as initiator and stannous 2-ethyl hexanoate as catalyst. The macromonomers were characterized with FT-IR, NMR, GPC, DSC, WAXS, and CD. The molecular weights of the macromonomers ranging from M _n 1425 to 19,169 are predictable from the lactide/HEMA ratio in the polymerization feeds. The properties of the macromonomers vary with the stereochemistry of the lactide and the composition. Circular dichroism measurements demonstrate that there is little racemization during polymerization.