Cellular Adhesion Tripeptide RGD Inhibits Growth of Human Ileocecal Adenocarcinoma Cells HCT-8 and Induces Apoptosis

The tripeptide,Arg-Gly-Asp(RGD)motif is an integrin-recognition site found in adhesive proteins present in extracellular matrices(ECM)and in the blood.HCT-8 cells were treated with cellular adhesion tripeptide RGD at various concentrations.MTT assay was performed to examine the growth and proliferation of HCT-8 cells after treatment with RGD for 48 h.Haematoxylin and Eosin(HE)staining and electromicroscope were used to observe the morphology of apoptotic cells.Survivin and flow cytometry were also used to analyze the HCT-8 apoptosis.Cellular adhesion tripeptide RGD significantly inhibits the growth and proliferation of HCT-8 cells in a dose-dependent manner and induces apoptosis of HCT-8.These results indicate that cellular adhesion tripeptide RGD inhibits the growth and proli-feration of tumor HCT-8 cell,probably by the aid of inducing apoptosis of HCT-8 cell.     

Comparison between RGD-peptide-modified titanium and borosilicate surfaces

The use of synthetic peptides containing adhesive sequences, such as the Arg-Gly-Asp (RGD) motif, represents a promising strategy to control biological interactions at the cell–material interface. These peptides are known to improve the tissue–material contact owing to highly specific binding to cellular membrane receptors known as integrins, thereby promoting the adhesion, migration and proliferation of cells. The peptides were coupled to borosilicate glass and titanium surfaces using silanisation chemistry. A tryptophan residue was incorporated into the amino acid sequences of selected peptides to facilitate the detection of the covalently bound peptides. Successful peptide immobilisation was proven by fluorimetric measurements. The confocal imaging analysis suggests a homogeneous distribution of the immobilised peptide across the biomaterial surface. In vitro cell proliferation assays were employed to compare the adhesion potentials of the well-known RGD-containing peptides GRGDSP, GRADSP and RGDS to the three peptides designed by our group. The results demonstrate that the RGD sequence is not necessarily required to enhance the adhesion of cells to non-biological surfaces. Moreover, it is shown that the number of adhering cells can be increased by changes in the peptide hydrophobicity. Changes in the cytoskeleton are observed depending on the type of RGD-peptide modification.     

Radio‐Analytical Determination of the Coating Efficiency of Cyclic RGD Peptides

Coating of artificial surfaces with RGD (= arginine‐glycine‐aspartate) peptides to enhance cell adhesion is an ongoing issue. Thereby, the physiological adhesion process to the extra‐cellular matrix (ECM) is mimicked by the peptide coating, leading to a strong cell‐surface contact, followed by spreading and proliferation of the cells. For comparable cell adhesion studies, it is important to know the density of the RGD peptides on the surface. Here, we present an approach to determine the amount of bound cyclic RGD peptide by radio labeling with ¹²⁵I of a tyrosine‐containing RGD peptide on different materials surfaces (poly(methyl methacrylate) (PMMA), titanium, and silicon). For all surfaces, the amount of bound peptides is in the range of pmol/cm¹.     

Adhesive peptides conjugated PAMAM dendrimer as a coating polymeric material enhancing cell responses

This present work aims to functionalize poly(amidoamine) (PAMAM) dendrimers with various reported adhesive peptides, including Arg-Gly-Asp (RGD), Tyr-Ile-Gly-Ser-Arg (YIGSR), and Ile-Lys-Val-Ala-Val (IKVAV) for enhancing cell responses. The RGD, YIGSR, or IKVAV functionalized PAMAM coated substrate could promote cell adhesion of bone marrow mesenchymal stem cells (BMSCs) within 1 h after incubation. The neurite differentiation and proliferation of pheochromocytoma (PC12) cells were also significantly enhanced after culturing on the peptide functionalized PAMAM dendrimers for two and four days. This peptide functionalized PAMAM dendrimers are considered as the potential candidates for various tissue engineering applications.     

Effect of grafting RGD and BMP-2 protein-derived peptides to a hydrogel substrate on osteogenic differentiation of marrow stromal cells

Osteogenic differentiation and mineralization of bone marrow stromal (BMS) cells depends on the cells' interactions with bioactive peptides associated with the matrix proteins. The RGD peptides of ECM proteins interact with BMS cells through integrin surface receptors to facilitate cell spreading and adhesion. The BMP peptide corresponding to residues 73-92 of bone morphogenetic protein-2 promotes differentiation and mineralization of BMS cells. The objective of this work was to investigate the effects of RGD and BMP peptides, grafted to a hydrogel substrate, on osteogenic differentiation and mineralization of BMS cells. RGD peptide was acrylamide-terminated by reacting acrylic acid with the N-terminal amine group of the peptide to produce the functionalized Ac-GRGD peptide. The PEGylated BMP peptide was reacted with 4-carboxybenzenesulfonazide to produce an azide functionalized Az-mPEG-BMP peptide. Poly (lactide-co-ethylene oxide- co-fumarate) (PLEOF) macromer was cross-linked with Ac-GRGD peptide and propargyl acrylate to produce an RGD conjugated hydrogel. Az-mPEG-BMP peptide was grafted to the hydrogel by "click chemistry". The RGD and BMP peptide density on the hydrogel surface was 1.62+/-0.37 and 5.2+/-0.6 pmol/cm2, respectively. BMS cells were seeded on the hydrogels and the effect of RGD and BMP peptides on osteogenesis was evaluated by measuring ALPase activity and calcium content with incubation time. BMS cells cultured on RGD conjugated, BMP peptide grafted, and RGD+BMP peptide modified hydrogels showed 3, 2.5, and 5-fold increase in ALPase activity after 14 days incubation. BMS cells seeded on RGD+BMP peptides modified hydrogel showed 4.9- and 11.8-fold increase in calcium content after 14 and 21 days, respectively, which was significantly higher than RGD conjugated or BMP grafted hydrogels. These results demonstrate that RGD and BMP peptides, grafted to a hydrogel substrate, act synergistically to enhance osteogenic differentiation and mineralization of BMS cells. These findings are potentially useful in developing engineered scaffolds for bone regeneration.     

Role of Ca(2+) in diallyl disulfide-induced apoptotic cell death of HCT-15 cells

Diallyl disulfide (DADS) induced apoptosis through the caspase-3 dependent pathway in leukemia cells was earlier reported from this laboratory. In this study, we investigated the involvement of Ca(2+) in DADS-induced apoptotic cell death of HCT-15, human colon cancer cell line. DADS induced the elevation of cytosolic Ca(2+) by biphasic pattern; rapid Ca(2+) peak at 3 min and following slow and sustained elevation till 3 h after the addition of DADS. Production of H(2)O(2) was also observed with its peak value at 4 h. Apoptotic pathways including the sequence of caspase-3 activation, poly(ADP-ribose) polymerase cleavage, and DNA fragmentation by DADS were completely blocked by various inhibitors such as specific caspase-3 inhibitor, free radical scavenger, and intracellular Ca(2+) chelator. N-acetylcystein and catalase treatment prevented the accumulation of H2O2 and later caspase-3 dependent apoptotic pathway. However, these radical scavengers did not block the elevation of intracellular Ca(2+). Treatment of cells with 1, 2-bis (2-aminophenoxyethane)-N, N, N-tetraacetic acid tetrakis -acetoxymethyl ester (BAPTA-AM), cellular Ca(2+) chelator, resulted in a complete blockage of the caspase-3 dependent apoptotic pathway of HCT-15 cells. It abolished the elevation of intracellular Ca(2+), and furthermore, completely inhibited the production of H(2)O(2). These results indicate that cytosolic Ca(2+) elevation is an earlier signaling event in apoptosis of HCT-15 cells. Collectively, our data demonstrate that DADS can induce apoptosis in HCT-15 cells through the sequential mechanism of Ca(2+) homeostasis disruption, accumulation of H(2)O(2), and resulting caspase-3 activation.     

Engineering of Covalently Immobilized Gradients of RGD Peptides on Hydrogel Scaffolds: Effect on Cell Behaviour

Summary: The aim of this study has been to design a system for the preparation of Polyethylene-glycol (PEG) based hydrogels with a controlled spatial distribution of covalently immobilised RGD adhesion signals in order to control and guide cell response for tissue engineering application. Gradients of immobilised RGD peptides were characterized by confocal microscopy analysis. Moreover, the effect of RGD spatial distribution on cell behaviour was evaluated by using mouse embryo fibroblasts NIH3T3. In particular, we observed cell adhesion and migration of fibroblasts seeded on RGD gradient compared to cells on control hydrogels having an uniform distribution of RGD. Our data suggest that a linear gradient of covalently immobilised adhesion signals affects cell behaviour. In particular, cells feel RGD gradient and oriented themselves and move along gradient direction.     

Photoswitched cell adhesion on surfaces with RGD peptides

Coating of surfaces by RGD peptides is well-known. Herein we describe the possibility to switch cell adhesion properties by changing the distance and orientation of the RGD peptides to the surface. A set of RGD peptides of the type cyclo(-RGDfK-) was synthesized containing the photoswitchable 4-[(4-aminophenyl)azo]benzocarbonyl central unit as spacer between the acrylamide anchor and the RGD peptide. PMMA (poly methyl methacrylate) surfaces were coated with these peptides. Control of adhesion stimulation by irradiation with 366 or 450 nm light could be achieved.     

Combined effect of osteopontin and BMP-2 derived peptides grafted to an adhesive hydrogel on osteogenic and vasculogenic differentiation of marrow stromal cells

The objective of this work was to investigate the combined effect of grafting the peptide corresponding to amino acid residues 162-168 of osteopontin (OPD peptide) and the peptide corresponding to amino acid residues 73-92 of bone morphogenetic protein-2 (BMP peptide) to an RGD-conjugated inert hydrogel on osteogenic and vasculogenic differentiation of bone marrow stromal (BMS) cells. RGD-conjugated three-dimensional (3D) porous hydrogel scaffolds with well-defined cylindrical pore geometry were produced from sacrificial wax molds fabricated by fused deposition modeling rapid prototyping system. Propargyl acrylate and 4-pentenal were conjugated to the hydrogel for orthogonal grafting of BMP and OPD peptides by click reaction and oxime ligation, respectively. The OPD peptide was grafted by the reaction between aminooxy moiety of aminooxy-mPEG-OPD (mPEG = mini-poly(ethylene glycol)) and the aldehyde moiety in the hydrogel. The BMP peptide was grafted by the reaction between the azide moiety of Az-mPEG-BMP and the propargyl moiety in the hydrogel. The hydrogels seeded with BMS cells were characterized by biochemical, immunocytochemical, and mRNA analyses. Groups included RGD control hydrogel (RGD), RGD and BMP peptides without OPD (RGD+BMP), RGD and BMP peptides with mutant OPD (RGD+BMP+mOPD), and RGD and BMP peptides with OPD (RGD+BMP+OPD) grafted hydrogels. The extent of mineralization of RGD, RGD+BMP, RGD+BMP+mOPD, and RGD+BMP+OPD groups after 28 days was 650 ± 70, 990 ± 30, 850 ± 30, and 1150 ± 40 mg/(mg of DNA), respectively, indicating that the BMP and OPD peptides enhanced osteogenic differentiation of the BMS cells. The BMS cells seeded on RGD+BMP+OPD grafted hydrogels stained positive for vasculogenic markers α-SMA, PECAM-1, and VE-cadherin while the groups without OPD peptide (RGD+BMP and RGD+BMP+mOPD) stained only for α-SMA but not PECAM-1 or VE-cadherin. These results were consistent with the significantly higher PECAM-1 mRNA expression for RGD+BMP+OPD group after 21 and 28 days, compared to the groups without OPD. These findings suggest that the RGD+BMP+OPD peptides provide a favorable microenvironment for concurrent osteogenic and vasculogenic differentiation of progenitor marrow-derived cells.     

Controlling cell attachment selectively onto biological polymer-colloid templates using polymer-on-polymer stamping

A new patterning approach using polymer-on-polymer stamping (POPS) has been developed to fabricate polymer-colloid templates for controlling selective cell attachment. In this paper, a polyamine surface patterned onto a poly(acrylic acid)/poly(allylamine hydrochloride) (PAA/PAH) cell resistant multilayer platform serves as a template for the deposition of close- or loose-packed colloidal particles. Peptides containing the RGD adhesion sequence were used to modify the PAH/colloid surface for specific cell attachment. Cell behavior was studied by varying colloidal packing array density, pattern geometry, and surface chemistry. It was found that loose-packed RGD-modified colloidal arrays enhance cell adhesion, as observed through the development of focal adhesion contacts and orientation of actin stress fibers, but close-packed colloidal arrays induce a rounded and nonadhesive cell morphology and yield a smaller number of attached cells. On loose-packed arrays, cells adjust their shapes to the pattern geometry when the stripe width is smaller than 50 microm and increase their extent of attachment when the concentration of surface RGD peptides is increased. This new biomaterials system allows the examination of cell behavior as a function of RGD surface distribution on the molecular to micrometer scale and reveals cellular response to different surface roughnesses.     

Cell adhesion and growth to Peptide-patterned supported lipid membranes

Lipid vesicles displaying RGD peptide amphiphiles were fused with glass coverslips to control the ability of these surfaces to support cell adhesion and growth. Cell adhesion was prevented on phosphatidylcholine bilayers in the absence of RGD, whereas cells adhered and grew in the presence of accessible RGD amphiphiles. This specific interaction between cells and RGD peptides was further explored in a concentration-dependent fashion by creating surface composition arrays using microfluidics. For the range of concentrations studied adhesion and growth were favored by increased peptide concentration, but this concentration dependence was found to diminish in the higher concentration regions of the array. Developing peptide composition gradients in a membrane environment is demonstrated as an effective method to screen biological probes for cell adhesion and growth.     

Surface Modification of Multiple Bioactive Peptides to Improve Endothelialization of Vascular Grafts

Endothelialization is an effective approach to prevent thrombus formation and enhance vascular graft survival. Surface modification of biomolecules has been proved to be effective in regulating endothelial cell behaviors. In this study, several peptides including YIGSR, RGD, and REDV sequences are covalently immobilized on the surface of electrospun silk fibroin scaffolds and the effects of combined application of these peptides on cell behaviors are studied. The results show that, compared with the scaffolds modified with single peptides, the scaffolds modified with dual peptides (YIGSR+RGD) could significantly enhance the proliferation of human umbilical vein endothelial cells (HUVECs). However, the combination of REDV+RGD or YIGSR+REDV does not promote the adhesion or proliferation of HUVECs. Notably, YIGSR‐modified scaffolds improved HUVEC migration significantly in comparison to REDV‐ or RGD‐modified groups. Moreover, its combination with either of these two peptides also presents excellent effect on cell migration. Thus, all the data suggest that the combined application of peptides might be a promising method to enhance the endothelialization of small‐diameter vascular grafts.     

Short peptides enhance single cell adhesion and viability on microarrays

Single cell patterning holds important implications for biology, biochemistry, biotechnology, medicine, and bioinformatics. The challenge for single cell patterning is to produce small islands hosting only single cells and retaining their viability for a prolonged period of time. This study demonstrated a surface engineering approach that uses a covalently bound short peptide as a mediator to pattern cells with improved single cell adhesion and prolonged cellular viability on gold patterned SiO2 substrates. The underlying hypothesis is that cell adhesion is regulated by the type, availability, and stability of effective cell adhesion peptides, and thus covalently bound short peptides would promote cell spreading and, thus, single cell adhesion and viability. The effectiveness of this approach and the underlying mechanism for the increased probability of single cell adhesion and prolonged cell viability by short peptides were studied by comparing cellular behavior of human umbilical cord vein endothelial cells on three model surfaces whose gold electrodes were immobilized with fibronectin, physically adsorbed Arg-Glu-Asp-Val-Tyr, and covalently bound Lys-Arg-Glu-Asp-Val-Tyr, respectively. The surface chemistry and binding properties were characterized by reflectance Fourier transform infrared spectroscopy. Both short peptides were superior to fibronectin in producing adhesion of only single cells, whereas the covalently bound peptide also reduced apoptosis and necrosis of adhered cells. Controlling cell spreading by peptide binding domains to regulate apoptosis and viability represents a fundamental mechanism in cell-materials interaction and provides an effective strategy in engineering arrays of single cells.     

Chemical conjugation of linear and cyclic RGD moieties to a recombinant elastin-mimetic polypeptide--a versatile approach towards bioactive protein hydrogels

An elastin-mimetic polypeptide, (EMM)(7), with the amino-acid sequence GRDPSS [VPGVG VPGKG VPGVG VPGVG VPGEG VPGIG](7) was used for chemical conjugation of various integrin ligands (RGD peptides) to prepare bioactive hydrogels. The chemical approach involved (1) chemical protection of lysine residues with Fmoc or Boc groups, (2) chemical ligation of a protected linear or cyclic RGD ligand, with or without a hexanoic-acid spacer to the glutamic acid residue, (3) deprotection of the lysine functionalities and the RGD moieties and (4) cross-linking to form a bioactive hydrogel. (1)H NMR spectroscopy was used to quantify the multiple steps in the reaction. The chemical protection was found to be between 65 and 93% for Fmoc and Boc, respectively. The ligands studied included linear RGD cell-binding [H-FGRGDS-OH (1-l-RGD), H-Ahx--FGRGDS-OH (2-Ahx-FGRGDS) and a cyclic -H(2)N-(CH(2))(6)COHN-cyclo(-RGDfK-) (H-Ahx-c(-RGDfK-)) peptide also with a hexanoic-acid spacer. Cell adhesion with mouse osteoblast cells was dependent on the ligand type, ligand density and the use of a spacer.     

Rational Design of Self-Assembled Mitochondria-Targeting Lytic Peptide Conjugates with Enhanced Tumor Selectivity

Membrane lytic peptides (MLP) are widely explored as cellular delivery vehicles or antitumor/antibacterial agents. However, the poor selectivity between cancer and normal cells slims their prospects as potential anti-tumor drugs. Herein, we have developed a rationally designed self-assembly strategy to enhance tumor selectivity of MLP-based conjugates, incorporating a hydrophobic triphenylphosphonium (TPP) group for mitochondria targeting, and a hydrophilic arginine-glycine-aspartic acid (RGD) sequence targeting integrins. The self-assembly nanoparticles can enhance the stability of the peptides in vitro plasma and be endocytosed selectively into the cancer cells. The histidine-rich lytic peptide component assists the disruption of endosomal/lysosomal membranes and subsequent the mitochondria membrane, which leads to apoptosis. This rational design of MLP-based conjugates provides a practical strategy to increase the application prospects of lytic peptides in cancer treatment.     

Combination of integrin-binding peptide and growth factor promotes cell adhesion on electron-beam-fabricated patterns

Understanding and controlling cell adhesion on engineered scaffolds is important in biomaterials and tissue engineering. In this report we used an electron-beam (e-beam) lithography technique to fabricate patterns of a cell adhesive integrin ligand combined with a growth factor. Specifically, micron-sized poly(ethylene glycol) (PEG) hydrogels with aminooxy- and styrene sulfonate-functional groups were fabricated. Cell adhesion moieties were introduced using a ketone-functionalized arginine-glycine-aspartic acid (RGD) peptide to modify the O-hydroxylamines by oxime bond formation. Basic fibroblast growth factor (bFGF) was immobilized by electrostatic interaction with the sulfonate groups. Human umbilical vein endothelial cells (HUVECs) formed focal adhesion complexes on RGD- and RGD and bFGF-immobilized patterns as shown by immunostaining of vinculin and actin. In the presence of both bFGF and RGD, cell areas were larger. The data demonstrate confinement of cellular focal adhesions to chemically and physically well-controlled microenvironments created by a combination of e-beam lithography and "click" chemistry techniques. The results also suggest positive implications for addition of growth factors into adhesive patterns for cell-material interactions.     

Tumor targeting by surface-modified protein microspheres

Protein microspheres have been used in the fields of biomedical imaging and drug delivery, but surface modification for cell targeting has been problematic. We have for the first time used an electrostatic adhesion approach to adhere arginine-glutamic acid-aspartic acid (RGD) containing peptides to the surface of protein microspheres for the purpose of targeting these vesicles to tumor cells. RGD sequences are recognized by integrin membrane receptors, which are overexpressed in various tumors. We have succeeded in modifying the surface of serum albumin core-shell microspheres, which have a fluorescent nonaqueous core by using several polylysine peptides containing the RGD sequence. Fluorescence microscopy reveals that these modified microspheres are selectively bound and taken up by HT29 human colon cancer cells in vitro.     

Role of Nuclear Factor-KB in Colon Cancer Cell Apoptosis Mediated by Aminopyropheophorbide Photosensitization

Aminopyropheophorbide (APP) is a second generation of photosensitizer for photodynamic therapy (PDT). We demonstrated that APP strongly absorbed red light and, after being taken up by colon cancer cells (HCT-116 cells), was localized in cytoplasmic and internal membranes but not in mitochondria. The APP-mediated photosensitization was cytotoxic for HCT-116 cells through an induction of apoptosis. Indeed, DNA fragmentation (DNA laddering and terminal deoxyuridine nick-end labeling) and chromatin condensation (4',6-diamidine-2'-phenylindole staining) could be visualized soon after photosensitization. Because nuclear factor (NF)-kappa B is involved in the response to many photosensitizers, we also demonstrated its nuclear translocation in two waves: a rapid and transient one, followed by a slow and sustained phase. The NF-kappa B turned out to be involved in an antiapoptotic response to APP-mediated photosensitization because the HCT-116 cell line expressing the dominant negative mutant of inhibitor-kappa B alpha was more sensitive to apoptosis as measured by DNA fragmentation and caspase activation. These data unambiguously show that a membrane-located photosensitizer can lead to effective apoptosis, reinforcing the idea that PDT can be an effective means to eradicate colon cancer cells.     

Inhibition of cell adhesion to fibronectin by oligopeptide-substituted polynorbornenes.

Polynorbornenes substituted with two different peptide sequences from the RGD-containing integrin cell-binding domain of fibronectin are potent inhibitors of human foreskin fibroblast cell adhesion to fibronectin-coated surfaces. Ring-opening metathesis polymerization (ROMP) using Ru==CHPh(Cl)(2)(PCy(3))(DHIMes) (1) as an initiator produced polymers substituted with GRGDS and PHSRN peptide sequences. The inhibitory activity was quantified for these polymers and compared to the free peptides and GRGES-containing controls. A homopolymer substituted with GRGDS peptides was significantly more active than the free GRGDS peptide (IC(50) of 0.18 +/- 0.03 and 1.33 +/- 0.20 mM respectively), and the copolymer containing both GRGDS and PHSRN is the most potent inhibitor (IC(50) of 0.04 +/- 0.01 mM). These results demonstrate that significant enhancements of observed biological activity can be obtained from polymeric materials containing more than one type of multivalent ligand and that ROMP is a useful method to synthesize such well-defined copolymers.     

AFM imaging of RGD presenting synthetic extracellular matrix using gold nanoparticles

Several high-resolution imaging techniques such as FESEM, TEM and AFM are compared with respect to their application on alginate hydrogels, a widely used polysaccharide biomaterial. A new AFM method applicable to RGD peptides covalently conjugated to alginate hydrogels is described. High-resolution images of RGD adhesion ligand distribution were obtained by labeling biotinylated RGD peptides with streptavidin-labeled gold nanoparticles. This method may broadly provide a useful tool for sECM characterization and design for tissue regeneration strategies.