Development of a chip-based capillary gel electrophoresis method for quantification of a half-antibody in immunoglobulin G4 samples

A method based on microfluidic technology was developed to support quantitative analysis of recombinant monoclonal immunoglobulin G4 (IgG4) antibody samples. The assay was performed on an Agilent 2100 Bioanalyzer in combination with the Protein 200 Plus LabChip Kit and the Protein 200 Plus assay software. Capillary electrophoresis principles have been transferred to a chip format that integrates all separation, staining, virtual destaining, and detection steps. The method is referred to in this paper as chip-based capillary gel electrophoresis (GelChip-CE method). The GelChip-CE method under nonreducing conditions proved to be a quantitative test for half-antibody determination in IgG4 samples. Similar to the traditional nonreducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) method, the GelChip-CE method includes a denaturing step prior to separation. We showed that denaturing the sample by heating resulted in an artificial increase in the amount of half-antibody detected, which could be prevented by addition of N-ethylmaleimide to the sample buffer. The GelChip-CE method allowed for analysis of IgG4 samples with more accuracy, higher precision, and a faster turnaround time than SDS-PAGE and reversed-phase high-performance liquid chromatography (RP-HPLC).     

Preparation and Characterization of PEGylated Thiophilic Nanoparticles for Rapid Antibody Separation

Magnetic nanoparticles with novel core-shell structure were prepared for immunoglobulin (IgG) separation, in which thiophilic property of sulfone groups and protein resistance of poly(ethylene glycol) (PEG) moieties were integrated. The step-wise surface reactions on the nanoparticles were characterized by ¹H nuclear magnetic resonance (NMR) and surface zeta potential measurements. With human IgG and bovine serum albumin (BSA) as model proteins, the effects of PEG chain length, conjugation group, solution pH and salt concentration on IgG selectivity were investigated using static adsorption experiments. The experiment results showed that mPEG2000-NH₂ modified magnetic nanoparticles had an adsorption capacity of 132.8 mg g^?1 and selectivity of 32.5 towards IgG under the condition of pH 7.45 and 0.15 M NaCl. In complex biological fluids, the PEG modified magnetic nanoparticles could separate IgG from fetal calf serum and Omalizumab from cell culture supernatant with purities of 96% and 99%, respectively. Moreover, the binding affinities of the proposed core-shell structure towards IgG from four animal species (human, bovine, rabbit and goat) were quantified by bio-layer interferometer (BLI). The results showed that the selectivity of this structure towards IgG varied from traditional Protein A method, suggesting its potentials in rapid separation and purification of IgG with low affinity towards Protein A.     

Profiling of hydroxyurea-treated β-thalassemia/ serum proteome through nano-LC–ESI–MS/ MS in combination with microsol-isoelectric focusing

Advancements in proteomic tools offer a comprehensive solution to studying the complexity of diseases at molecular level. This study focusses on the clinical proteomic profiling of pre- and post-hydroxyurea (HU)-treated β-thalassemia patients in parallel with healthy individuals to better understand the role of HU in the treatment of β-thalassemia. The strategy encompasses sequential high-resolution protein fractionation using MicroSol-isoelectric focusing (ZOOM- IEF) followed by one-dimensional SDS-PAGE before nano-RP-LC–MS/ MS analysis of tryptic peptides. Protein identification was performed through Mascot search using NCBInr and SwissProt databases. Several different proteins were observed in pool serum samples of each of the three study groups. Approximately, 1250 proteins exclusive to each group were identified, and after removing the redundant and low sequence coverage proteins, the number was reduced to 576 (201 in healthy, 187 in HU-untreated and 188 in HU-treated group). Uniquely identified proteins in the HU-treated group regulate the focal adhesion, ECM-receptor interaction, PI3K-Akt signaling, Rap1 signaling, cAMP signaling, platelet activation, and Ca²⁺ signaling pathways in the HU-treated group. The proteomic profile presented here will add to the current state of understanding of molecular mechanisms involved in hydroxyurea treatment of β-thalassemia.     

Effect of α-Ketoglutarate on Monoclonal Antibody Production of Hybridoma Cell Lines in Serum-Free and Serum-Containing Medium

Process development and optimization for increase population growth and protein productivity in mammalian cell culture have been studied for many years. In this study, the behavior of hybridoma cells was investigated using six-well micro-titer plate systems with a working volume of 4 ml. Mouse hybridoma cell lines D2 and 2C83G2 were seeded in serum-free and serum-containing media and cultured for 8 days. alpha-Ketoglutarate is an integral component of the tricarboxylic acid (TCA) cycle and is produced from glutamine via glutamate. To study its effect on cell growth, metabolism, and monoclonal antibody (mAb) production, 2 mM alpha-ketoglutarate (pH 7.2) was added in both media at the beginning of the cultivation and in another set after 72 h. High cell density was observed in D2 cell culturing in serum-free medium, while 2C83G2 cell line showed high cell density in serum-containing medium. However, both cell lines cultured in serum-free medium gave viability above 70% when grown for 8 days. The supplement of 2 mM alpha-ketoglutarate supported cell growth and mAb production of both hybridoma cell lines in serum-free and serum-containing medium. The addition of alpha-ketoglutarate at the beginning of the batch cultivation gave better result in cell growth and mAb production as compared to alpha-ketoglutarate supplementation after 72 h. However, addition after 72 h was better than no addition at all. This indicates that alpha-ketoglutarate have a positive effect on production and release of antibody.     

Gellan beads as a transparent media for protein immobilization and affinity capture

Gellan gum beads are presented as a novel substrate for protein immobilization and immobilized protein activity measurements. The optical transparency of the gellan beads down to 200 nm provides a method for direct quantitation of the amount of protein immobilized onto the beads. The ability to utilize these beads in a non-aqueous activation step allowed for a fourfold increase in the amount of protein immobilized, and this method was used to immobilize Protein A onto gellan beads at a final yield of 1.42+/-0.07 mg of Protein A/g of beads. The optical transparency also allowed for detection of the activity of the immobilized Protein A simply by measuring the absorbance of the beads following capture of rabbit IgG. This activity measurement method was compared with a traditional method utilizing the amount of protein remaining in solution after the IgG capture step. The traditional method yielded an activity measurement of 10.9+/-0.2 mg IgG/mg of Protein A, while the absorbance method showed an activity of only 7.5+/-0.3 mg IgG/mg of Protein A. The difference can be explained by the more direct measurement used in the absorbance method. The optical transparency of the beads was also evaluated in a fluorescence based IgG capture experiment, showing that detection of fluorescent IgG captured on the beads was possible with no interference from the beads.     

Quantification of immunoglobulin G and characterization of process related impurities using coupled Protein A and size exclusion high performance liquid chromatography

The present work describes two HPLC-UV methods for multi-protein quantification using (i) only a Protein A sensor cartridge (Protein A HPLC) and (ii) the same Protein A cartridge in combination with a size exclusion HPLC column (PSEC-HPLC). The possibility to simultaneously quantify immunoglobulin G (IgG) besides a non-binding protein such as bovine serum albumin (BSA) increases the applicability of Protein A HPLC. Its most pronounced feature is its independence of the buffer system, pH-value and salt content of the investigated sample solvent, which includes cell media. A comparison with the state-of-the-art, the photometrical Bradford method, shows that Protein A HPLC is as sensitive as Bradford, but that it comes with an extended linear range of 4 orders of magnitude, ranging from 0.15 [μg abs] to 1 [mg abs] absolute injected protein amount. The applicability of the PSEC-HPLC method is demonstrated for the analysis of real cell culture feed samples. While Protein A binds IgG, the SEC-column distributes the feed impurities by their molecular weight. The peak area ratios of IgG and the feed impurities of interest are then plotted against the collected sample fraction. These Protein A-Size-Exclusion-Chromatographic diagrams (PSEC-plot) combine the performance information of feed impurities and IgG in a single plot. Further it is shown that both methods are suitable for the performance evaluation of antibody purification media using static as well as dynamic binding experiments performed on DEAE-Fractogel and Capto Adhere. The investigated test samples were “mock” protein solutions with increasing complexity ranging from simple PBS buffer to serum free cell media and “real” cell culture feed solutions.     

Depletion of high-abundance proteins from human plasma using a combination of an affinity and pseudo-affinity column

Human serum albumin (HSA) and immunoglobulin G (IgG) represent over 75% of all proteins present in human plasma. These high-abundance proteins prevent the detection of low-abundance proteins which are potential markers for various diseases. The depletion of HSA and IgG is therefore essential for further proteome analysis. In this paper we describe the optimization of conditions for selective depletion of HSA and IgG using affinity and pseudo-affinity chromatography. A BIA Separations CIM (convective interaction media) Protein G disk was applied for the removal of IgG and the Mimetic Blue SA A6XL stationary phase for the removal of HSA. The binding and the elution buffer for CIM Protein G disk were chosen on the basis of the peak shape. The dynamic binding capacity was determined. It was shown to be dependent on the buffer system used and independent of the flow rate and of the concentration of IgG. Beside the binding capacity for the IgG standard, the binding capacity was also determined for IgG in human plasma. The Mimetic Blue SA A6XL column was characterized using human plasma. The selectivity of the depletion was dependent on the amount of human plasma that was loaded on the column. After the conditions on both supports had been optimized, the Mimetic Blue SA A6XL stationary phase was combined with the CIM Protein G disk in order to simultaneously deplete samples of human plasma. A centrifuge spin column that enables the removal of IgG and HSA from 20 μL of human plasma was designed. The results of the depletion were examined using sodium dodecyl sulfate polyacrylamide gel electrophoresis and two-dimensional gel electrophoresis.     

Combining Low Pressure Liquid Affinity Chromatography and Flow Injection Analysis for the Quantitation of Immunoglobulins

Abstract

A simple, accurate method combining low pressure liquid affinity chromatography and flow injection analysis is described for the quantitation of immunoglobulins in biologicals fluids. The affinity matrix consists of Protein A covalently immobilized to a 2-fluoro-1 methylpyridinium salt activated Fractogel support. Utilizing a 1 cm³ affinity column, optimized binding and eluting buffer flow rates of 0.7 and 1.5 mL min^?1, respectively, and a sample loop size of 100 μL, IgG's can be eluted from the affinity column in about 9 min. Linear standard curves (r > 0.99) were obtained at concentrations up to at least 4.0 and 8.0 mg mL^?1 respectively for human and bovine IgG. Recovery yields are good ranging from 96–100%. The within day CV for human and bovine IgG was found to be less than 3.0% whereas the day to day CV was less than 3.4% (n=10). IgG concentrations of spiked and unspiked bovine plasma samples obtained by the low pressure affinity/flow injection method when compared to those obtained by the radial immunodiffusion agreed to within 4%.     

Label-free electrochemical impedance spectroscopy biosensor for the determination of human immunoglobulin G

A simple and sensitive biosensor was developed for the determination of human immunoglobulin G (IgG). Protein A was employed as molecular receptor and electrochemical impedance spectroscopy (EIS) was used as detection technique. The biosensor was obtained by self-assembling protein A on a gold electrode. The surface morphology of the self-assembled layer before and after interaction with IgG was studied by atomic force microscopy. Protein A bound specifically to the Fc portion of IgG, and this caused a change in the resistance of the interfacial electron transfer when using a ferrocyanide redox couple as a probe. The increase of the resistance of the electron transfer was linearly related to the concentration of IgG in the range from 10 ng.mL^?1 to 1.0 μg.mL^?1, with a detection limit of 5 ng.mL^?1. The work demonstrates that protein A is a versatile matrix for the immobilization of antibodies.     

Routine diagnosis with PhastSystem compared to conventional electrophoresis: automated sodium dodecyl sulfate-polyacrylamide gel electrophoresis, silver staining and western blotting of urinary proteins

The recent introduction of the PhastSystem, an automatic electrophoresis and staining system with precast gradient-gels, allows rapid and reproducible analysis of proteinuria in patients suffering from renal injury. A routine method for sodium dodecyl sulfate-polyacrylamide gradient gel electrophoresis (SDS-PAGE) and silver staining of unconcentrated urine specimens in the PhastSystem is described and compared to our conventional "macro"-method with self-cast SDS-polyacrylamide gradient gels. The method described for the PhastSystem using 0.3 microL sample volumes and an 8-25% polyacrylamide gradient gel leads to highly reproducible results within 1.5 h. Before electrophoresis urine specimens were neither concentrated nor dialyzed. Samples with a protein concentration exceeding 5 mg/mL had to be diluted 1:5 (v/v). Analysis and documentation of PhastGels appeared as easy as with our conventional SDS-PAGE. Protein bands could reliably be identified by Western blotting. Urine and serum proteins, separated in PhastGels, were electrophoretically transferred to nitrocellulose and detected with specific antibodies against human albumin, transferrin, alpha-1-antitrypsin and IgG. Comparison of several standard kits for molecular weight determination revealed considerable differences concerning the quality of protein separation patterns. Availability of precast gels and automatization of SDS-PAGE and staining allows easy standardization of urine SDS-PAGE among clinical routine laboratories.     

Purification of human immunoglobulin G via Fc-specific small peptide ligand affinity chromatography

Chromatographic resins of a family of linear Fc-binding hexamer peptides (HWRGWV, HYFKFD, and HFRRHL) exhibited the ability to selectively adsorb and isolate human IgG (hIgG) from complete mammalian cell culture medium (cMEM). Among them, the HWRGWV resin with a peptide density of 0.08 mequiv./g of resin was able to purify hIgG from cMEM with both purity and yield as high as 95%, comparable to Protein A and A2P agarose gels. The influences of N-terminal acetylation of the HWRGWV resin, ligand density on the resin, initial hIgG concentration, and temperature on IgG isolation were also investigated. The results indicate that these small peptide ligands, especially HWRGWV, offer a potential alternative to the use of Protein A or Protein G for large scale affinity chromatography.     

Influence of biological media on the structure and behavior of ferrocene-containing cationic lipid/DNA complexes used for DNA delivery

Biological media affect the physicochemical properties of cationic lipid-DNA complexes (lipoplexes) and can influence their ability to transfect cells. To develop new lipids for efficient DNA delivery, the influence of serum-containing media on the structures and properties of the resulting lipoplexes must be understood. To date, however, a clear and general picture of how serum-containing media influences the structures of lipoplexes has not been established. Some studies suggest that serum can disintegrate lipoplexes formed using certain types of cationic lipids, resulting in the inhibition of transfection. Other studies have demonstrated that lipoplexes formulated from other lipids are stable in the presence of serum and are able to transfect cells efficiently. In this article, we describe the influence of serum-containing media on lipoplexes formed using the redox-active cationic lipid bis(n-ferrocenylundecyl)dimethylammonium bromide (BFDMA). This lipoplex system promotes markedly decreased levels of transgene expression in COS-7 cells as serum concentrations are increased from 0 to 2, 5, 10, and 50% (v/v). To understand the cause of this decrease in transfection efficiency, we used cryogenic transmission electron microscopy (cryo-TEM) and measurements of zeta potential to characterize lipoplexes in cell culture media supplemented with 0, 2, 5, 10, and 50% serum. Cryo-TEM revealed that in serum-free media BFDMA lipoplexes form onionlike, multilamellar nanostructures. However, the presence of serum in the media caused disassociation of the intact multilamellar lipoplexes. At low serum concentrations (2 and 5%), DNA threads appeared to separate from the complex, leaving the nanostructure of the lipoplexes disrupted. At higher serum concentration (10%), disassociation increased and bundles of multilamellae were discharged from the main multilamellar complex. In contrast, lipoplexes characterized in serum-free aqueous salt (Li(2)SO(4)) medium and in OptiMEM cell culture medium (no serum) did not exhibit significant structural changes. The zeta potentials of lipoplexes in serum-free media (salt medium and cell culture medium) were similar (e.g., approximately -35 mV). Interestingly, the presence of serum caused the zeta potentials to become less negative (about -20 mV in OptiMEM and -10 mV in Li(2)SO(4)), even though serum contains negatively charged entities that have been demonstrated to lead to more negative zeta potentials in other lipoplex systems. The combined measurements of zeta potential and cryo-TEM are consistent with the proposition that DNA threads separate from the lipoplex in the presence of serum, resulting in a decrease in the net negative charge of the surface of the lipoplex.     

Effect of Operating Conditions in Production of Diagnostic Salmonella Enteritidis O-Antigen-Specific Monoclonal Antibody in Different Bioreactor Systems

In this study, different cultivation systems such as roller bottles (RB), 5-L stirred-tank bioreactor (STR), and disposable bioreactors were used to cultivate hybridoma for lab-scale production of Salmonella Enteritidis O-antigen-specific monoclonal antibody (MAb). Hybridoma cell line was cultivated in either serum-containing or serum-free medium (SFM) culture conditions. In STR, MAb production scaled up to 4 L, and production capabilities of the cells were also evaluated in different featured production systems. Moreover, the growth parameters of the cells in all production systems such as glucose consumption, lactate and ammonia production, and also MAb productivities were determined. Collected supernatants from the reactors were concentrated by a cross-flow filtration system. In conclusion, cells were not adapted to SFM in RB and STR. Therefore, less MAb titer in both STR and RB systems with SFM was observed compared to the cultures containing fetal bovine serum-supplemented medium. A higher MAb titer was gained in the membrane-aerated system compared to those in STR and RB. Although the highest MAb titer was obtained in the static membrane bioreactor system, the highest productivity was obtained in STR operated in semicontinuous mode with overlay aeration.     

Development and optimization of a single-step procedure using protein A affinity chromatography to isolate murine IgG1 monoclonal antibodies from hybridoma supernatants.

Protein A affinity chromatography is a standard method of purifying murine monoclonal antibodies (mabs), primarily because it can be performed easily and achieves high-purity levels. Because of its high concentration capacity, it lends itself particularly well to the isolation of mabs from the supernatants of hybridoma cultures. Unfortunately, murine immunoglobulin (Ig) G1 antibodies, a subclass which occurs frequently in the IgG mabs of mice, binds very poorly to protein A, leading to problems in this isolation procedure. For this reason an attempt was made to increase the effectiveness of protein A affinity chromatography in purifying mabs of this IgG subclass by optimizing the binding conditions. The influence of ionic strength, pH and temperature on the binding capacity of a protein A column was studied. The results show the significance of temperature in the binding of the murine IgG1 mab tested to protein A. Further investigations were carried out to optimize the elution conditions and to study the contamination of mab preparations obtained with non-specific bovine protein A reactive Igs originating from culture medium supplement (10% foetal calf serum). An optimized, automatic single-step procedure to obtain highly purified murine IgG1 mabs from hybridoma culture supernatants was developed.     

Determination of the latex particle size in emulsion polymerization of methyl methacrylate with low emulsifier concentrations

The mean size of the latex particles formed in emulsion polymerization of methyl methacrylate under definite conditions (water: monomer volume ratio 15: 1, 80°C, potassium persulfate concentration 0.07 wt %) decreases from 200 to 9–10 nm as the concentration of an ionic surfactant (anionic Disponil AES 60, SDS, cationic C₁₉H₄₂BrN) is increased from 0.0 to 1.0 wt %. The nonionic surfactants studied influence the size of the latex particles formed differently: with ALM-10, the particle size decreases from 200 to 150–190 nm, whereas with ALM-7 and ALM-2 it increases from 200 to 320 nm as the surfactant concentration is increased from 0.0 to 1.0 wt %. An increase in the concentration of F127 amphiphilic ternary block copolymer from 0.0 to 1.0 wt % leads to a monotonic decrease in the size of the poly(methyl methacrylate) latex particles formed from 200 to 53 nm.     

Establishing a quality control protocol for the radiochemical evaluation of radioiodinated biomolecules with application in nuclear medicine

Quality Control (QC) of radiopharmaceuticals is important, providing products of high standards. The current study refers to an enzymic radioiodination method applied to the labeling of antibodies used in nuclear medicine and to the respective QC procedures. Readily available materials such as¹²⁵I, polyclonal immunoglobulin G (IgG) and a collection of simple chromatographic techniques helped establish a QC protocol suitable for the radiochemical evaluation of radioiodinated biomolecules. A high pre-purification radiolabeling yield (90%) for total protein was detected by paper electrophoresis (PE) and size exclusion chromatography (SEC), but only the inclusion of SDS-PAGE confirmed the existence of “self-iodination” of lactoperoxidase (LPO) and revealed the true radiolabeling yield for¹²⁵I-IgG (79%).     

Surface immobilized protein multilayers for cell seeding

Multilayer assemblies containing various cell-adhesive proteins such as gelatin, collagen IV, and laminin or polycations polylysine and poly(ethyleneimine) were immobilized on the polystyrene surface using the layer-by-layer technique based on hydrophobic and electrostatic interactions between oppositely charged macromolecules. The formation and stability of the assemblies and the adsorption of proteins from a serum containing cell-cultivation media onto their surfaces were observed in real time by Fourier transform infrared multiple internal reflection spectroscopy. The adhesion and growth of mouse embryonic stem cells line D3 were tested in polystyrene culture dishes coated with the assemblies. The cells were seeded in complete serum-containing media or in serum-free media and in the presence (non-differentiated) and/or absence (differentiated) of leukemia inhibitory factor. Proteins from serum-containing cell-cultivation media adsorbed rapidly onto positively charged surfaces. The cells grew best on surfaces coated with gelatin and collagen IV assemblies. There were no significant differences in the growth of the non-differentiated and differentiated cells in complete serum-containing media. When seeded in serum-free media, non-differentiated cells grew better than the differentiated ones. Particularly, polycation surfaces treated with glutaraldehyde promoted the growth of the non-differentiated cells and hindered the growth of the differentiated cells. The layer-by-layer deposition appears to be a practicable technique by which scaffolds for tissue engineering can be coated with biomolecular assemblies tailored to specific cells and applications.     

Application of k 0-based internal monostandard NAA for large sample analysis of clay pottery: as a part of inter comparison exercise

As a part of inter comparison exercise of an IAEA Coordinated Research Project on large sample neutron activation analysis, a large size and non standard geometry size pottery replica (obtained from Peru) was analyzed by k ₀-based internal monostandard neutron activation analysis (IM-NAA). Two large size sub samples (0.40 and 0.25 kg) were irradiated at graphite reflector position of AHWR Critical Facility in BARC, Trombay, Mumbai, India. Small samples (100–200 mg) were also analyzed by IM-NAA for comparison purpose. Radioactive assay was carried out using a 40 % relative efficiency HPGe detector. To examine homogeneity of the sample, counting was also carried out using X–Z rotary scanning unit. In situ relative detection efficiency was evaluated using gamma rays of the activation products in the irradiated sample in the energy range of 122–2,754 keV. Elemental concentration ratios with respect to Na of small size (100 mg mass) as well as large size (15 and 400 g) samples were used to check the homogeneity of the samples. Concentration ratios of 18 elements such as K, Sc, Cr, Mn, Fe, Co, Zn, As, Rb, Cs, La, Ce, Sm, Eu, Yb, Lu, Hf and Th with respect to Na (internal mono standard) were calculated using IM-NAA. Absolute concentrations were arrived at for both large and small samples using Na concentration, obtained from relative method of NAA. The percentage combined uncertainties at ±1 s confidence limit on the determined values were in the range of 3–9 %. Two IAEA reference materials SL-1 and SL-3 were analyzed by IM-NAA to evaluate accuracy of the method.     

Enzyme Immunoassay of Thyroid-Stimulating Hormone Using Dried Blood Samples a Simple Technique of Screening for Congenital Hypothyroidism

Abstract

A method for enzyme imnunoassay of thyroid-stimulating hormone (TSH) in dried blood spotted onto filter paper has been developed. TSH was conjugated to horse-radish peroxidase according to Nakane's method. Separation of the bound and free fractions was obtained by a double antibody solid phase method using polyacetal beads which were coated with the purified IgG fraction from goat anti-rabbit IgG serum. p-Hydroxyphenyl propionic acid was used as substrate for the fluorophotometric assay of peroxidase activity. The assay sensitivity is 0.07, μU TSH/assay tube, which is equivalent to μU/ml when five 3 mm discs of dried blood spot are assayed. TSH values in dried blood samples obtained by this method correlate well with those of serum samples obtained by radioimmunoassay (r=0.89). The coefficients of variation were 6.8 to 13.4% (within assay) and 5 to 40% (between assay). The enzyme immunoassay of TSH presented here is applicable to the mass-screening for congenital hypothyroidism of neonate.     

基于微流控技术的磁免疫荧光法在EB病毒检测中的应用

EB病毒(Epstein-Barr virus,EBV)的早期诊断能够降低患者发生重大疾病的风险.临床上常用的EBV抗体的检测方法存在耗时长、试剂消耗大和效率低等缺点.相比于传统的检测方法,微流控(microfluidics)技术具有高通量、试剂消耗少,污染少和自动化程度高等优点,磁免疫荧光技术具有检测效率高、信号强等...