A mild method for the deprotection of tetrahydropyranyl (THP) ethers catalyzed by iron(III) tosylate

A mild method for the deprotection of THP ethers catalyzed by iron(III) tosylate (2.0 mol %) in CH₃OH has been developed. Iron(III) tosylate, Fe(OTs)₃·6H₂O, is a commercially available solid that is inexpensive, noncorrosive, and easy to handle. The room temperature reaction conditions make this method attractive for deprotection of a range of THP ethers.     

Highly chemoselective reduction using a Rh/C-Fe(OAc)2 system: practical synthesis of functionalized indoles

Here, we report a highly effective and chemoselective method of preparing substituted indoles from (E)-2-nitropyrrolidinostyrenes via hydrogenation in the presence of a rhodium catalyst doped by additives such as Ni(NO₃)₂·6H₂O, Fe(OAc)₂ or Co(acac)₃. These hydrogenation conditions may also be applied to other substrates. Aromatic nitro compounds and olefins can be selectively reduced in the presence of aromatic benzyl ethers, aromatic halides and aromatic aldehydes.     

Asymmetric conjugate addition of thiols to (E)-3-crotonoyloxazolidin-2-one by iron or cobalt/pybox catalyst

The enantioselective conjugate addition of thiols to (E)-3-crotonoyloxazolidin-2-one was effectively catalyzed by the Fe(BF₄)₂·6H₂O/(S,S)-ip-pybox catalyst, and the addition product was obtained with up to a 95% ee. Furthermore, the Co(ClO₄)₂·6H₂O/(S,S)-ip-pybox catalyst also catalyzed the same reaction with a high enantioselectivity.     

On the Lanthanide Ferrocyanides KLnFe(II)(CN)6·xH2O (Ln=La-Lu): Characterization and Thermal Evolution

The properties of a series of lanthanide hexacyanoferrate(II) n-hydrates were studied by thermal analysis, IR spectroscopy and X-ray diffraction. Thermal analysis results show that there are three kinds of complexes in this series, KLn[Fe(CN)₆]·4 H₂O (Ln=La-Nd), KSm[Fe(CN)₆]·3H₂O and KLn[Fe (CN)₆]·3.5H₂O (Ln=Eu-Lu). On the basis of IR spectra, only two different types of complexes show obvious differences. Indeed for the tetrahydrates, there is one OH stretching band; on the other hand, for the samarium phase and the 3.5 hydrates a splitting of HOH stretching mode is observed. The splitting of the H₂O band is correlated to a symmetry modification. The crystal structures of the three complexes KLn[Fe(CN)₆]·3.5H₂O (Ln=Eu, Er and Lu) were determined; they belong to orthorhombic symmetry (space group Cmcm). Heat-treated powders have been investigated by X-ray analysis which show the formation of thin needles of LnFeO₃ at 600°C.     

Fe-exchanged fluorotetrasilicic mica as an active and reusable catalyst for Michael reaction

Fe³⁺-exchanged fluorotetrasilicic mica acts as a highly effective and reusable catalyst for the solventless Michael reaction of β-ketoesters with vinyl ketones under mild condition. The immobilized catalyst shows higher activity than homogeneous Fe³⁺ catalysts, FeCl₃·6H₂O and Fe(NO₃)₃·9H₂O.     

[Cd2(tren)2(dl-alaninato)](ClO4)3: an efficient water-compatible Lewis acid catalyst for chemo-, regio-, and diastereo-selective allylation of various aldehydes

The use of [Cd₂(tren)₂(dl-alaninato)](ClO₄)₃·H₂O (I) (tren = tris(2-aminoethyl)amine) as an efficient water-compatible Lewis acid catalyst for the allylation of aldehydes in aqueous media was described. The reaction proceeded smoothly to afford the corresponding homoallyl alcohols in up to 96% yield. Additionally, cinnamyltributylstannane was selected as the allylation reagent, the regio- and diastereoselectivity of the reaction favors the formation of the γ-product and the anti isomers, respectively.     

Enantioselective C-S bond formation by iron/Pybox catalyzed Michael addition of thiols to (E)-3-crotonoyloxazolidin-2-one

The enantioselective Michael addition of thiols to (E)-3-crotonoyloxazolidin-2-one was effectively catalyzed by the Fe(BF₄)₂·6H₂O/(S,S)-ip-Pybox catalyst, and the addition product was obtained with up to a 95% ee.     

Copper(II) trans-bis-(glycinato): an efficient heterogeneous catalyst for cross coupling of phenols with aryl halides

Copper(II) trans-bis-(glycinato) complex, easily prepared by the solid state reaction of copper(II) acetate and glycine (trans-[Cu(glyo)₂·H₂O]) was found to be an efficient, recyclable, and high yielding catalyst for the Ullmann type synthesis of diaryl ethers via the cross coupling of phenols with aryl halides without using any additives at relatively low reaction temperature. The catalyst could easily be recovered by simple filtration and was reused for several runs with consistent catalytic activity.     

Ferric sulfate [Fe2(SO4)3·xH2O]: an efficient heterogeneous catalyst for the synthesis of tetrahydroquinoline derivatives using Povarov reaction

Fe₂(SO₄)₃·xH₂O can be used as an efficient and reusable catalyst for the synthesis of pyrano- and furanotetrahydroquinolines via one-pot three-component Povarov reaction involving aromatic aldehydes, aromatic amines, and cyclic enol ethers. The catalyst is recyclable, economically viable, and environmentally benign. This protocol provides good yields and diastereoselectivity as well as applicability on a wide range of substrates.     

3d-Metal Nitroprusside–Thiosemicarbazide Complexes: Synthesis and Properties

The following complexes were synthesized from 3d-metal nitroprussides and thiosemicarbazide: [CrL₃][Fe(CN)₅H₂O] · 6H₂O, [FeL₃]₂[Fe(CN)₅NO]₃ · 14H₂O, [CoL₃]₂[Fe(CN)₅NO]₃ · 4H₂O, [NiL₂][Fe(CN)₅NO], [CuL₂][Fe(CN)₅NO] · 5H₂O, and [[ZnL₂][Fe(CN)₅NO], where L is thiosemicarbazide. Their structures and properties were studied by IR and diffuse reflection spectroscopies and DTA.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Selective 1,2-dihalogenation and oxy-1,1-dihalogenation of alkynes by N-halosuccinimides

1,2-Dihalogenation and oxy-1,1-dihalogenation of alkynes by N-halosuccinimides can be selectively realized through using different reaction conditions. α,β-Dihalo alkenes were obtained exclusively using THF as solvent without using any catalyst, while α,α-dihalo ketones were synthesized using a mixed solvent of THF and H₂O in the presence of FeCl₃·6H₂O. Terminal aromatic alkynes are smoothly transformed into α,α-dihalo ketones on water without a catalyst.     

Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.     

RuCl3·3H2O as catalyst for Ferrier rearrangement: an efficient procedure for the preparation of pseudoglycosides

By using RuCl₃·3H₂O as catalyst, an improved method for the synthesis of 2,3-unsaturated-glycosides has been established. A series of 2, 3-unsaturated-glucosides were obtained from 2,4,6-tri-O-acetyl-d-glucal or 3,4-di-O-acetyl-6-deoxy-l-glucal in good yield and high anomeric selectivity.     

Synthesis,crystal structures and spectroscopic studies of praseodymium(III) malonate complexes

Reactions of malonic acid (H₂mal) with PrCl₃·6H₂O afforded the known complex [Pr₂(mal)₃(H₂O)₆]_n (1), and compounds [Pr₂(mal)₃(H₂O)₆]_n·2nH₂O (2·2nH₂O), [PrCl(mal)(H₂O)₃]_n·0.5nH₂O (3·0.5nH₂O) and [Pr(mal)(Hmal)(H₂O)₃]_n·nH₂O (4·nH₂O) using various reaction ratios, reaction media (H₂O, MeOH) and pH values. Analogous reactions with CeCl₃·7H₂O afforded compounds [Ce₂(mal)₃(H₂O)₆]_n (5), [CeCl(mal)(H₂O)₃]_n·nH₂O (6·nH₂O) and [Ce(mal)(Hmal)(H₂O)₃]_n·nH₂O (7·nH₂O). Compounds 2·2nH₂O and 3·0.5nH₂O were characterized by X-ray crystallography, and 4–7 by microanalytical and spectroscopic data. The malonate(-2) ligand adopts three different coordination modes in the structures of 1–3, i.e., the μ₂-κO:κO′:κO″ and the μ₄-κ²O:κO′:κ²O″:κO? in 1 and 2 leading to a 3D network structure, and the μ₃-κ²O:κO′:κ²O″:κO? in 3 promoting an 1D structure. The thermal decomposition of 1 and 3·0.5nH₂O was monitored by TG/DTA and TG/DTG measurements. The structural features of 1–3 are discussed in terms of known malonato(-2) Ln^III and Ca^II complexes. The bioinorganic chemistry relevance of our results is discussed.     

Direct electrochemical synthesis and characterization of copper(II), iron(II) and iron(III) complexes with 1- and 2-substituted pyridines

Summary The electrochemical oxidation of anodic metals (iron and copper) in MeCN solutions of 2-pyridinone (HOPy), 1-hydroxy-2-pyridinethione (HPT), 2-pyridinemethanethiol-1-oxide (HPMTO) or its dimer 2,2-dithiodimethyldipyridine-1,1-dioxide (PMTO)₂, gave the simple complexes Fe(OPy)₂ · H₂O, Cu(OPy)₂ · 3H₂O, Fe(PT)₂ · 3H₂O, Fe(PT)₃, Cu(PT)₂, Fe(PMTO)₂·3H₂O and Cu(PMTO)₂·H₂O, respectively. When 1,10-phenanthroline (phen) was added to the electrolytic phase, only two mixed complexes were obtained: Cu(OPy)₂phen·3H₂O and Fe(PT)₂phen·2H₂O. The possible molecular structures of the complexes were studied on the basis of their i.r. spectra and magnetic properties.     

Extraction systems of flame atomic absorption determination of trace impurities in high purity nickel salts

Summary Different extraction sytems including long chain quaternary alkylammonium salts and APDC were investigated in order to determine the optimal conditions for extraction separation and preconcentration of traces of Ag, Bi, Cd, Cu, Fe, Mo, Pb, Sb and Zn from high purity NiSO₄·6H₂O, NiCl₂·6H₂O, Ni(OOCCH₃)₂·4H₂O and Ni(NO)₃)₂·6 H₂O. Best results for multielement preconcentration were found with the extraction system HCl-trioctylmethylammonium chloride-0,002 mol/l APDC/MIBK. The proposed method permits the flame atomic absorption determination of 5·10^–6%, Ag, Cd, Cu and Zn, 1·10^–5% Bi, Fe, Pb and 5·10^–5% Mo and Sb with good accuracy and precision.     

Untersuchung der Aussalz- bzw. Dehydratationswirkung des Kaliumhydroxids auf Kalium-eisen(II)-cyanidlösungen

Zusammenfassung Mittels physikalisch-chemischer Analyse wurde das System K₄Fe(CN)₆/KOH/H₂O untersucht. Es wurde gezeigt, daß bei 30° bzw. 40°C KOH stark aussalzend auf die Kaliumeisen(II)-cyanidlösungen wirkt, wobei die feste Gleichgewichtsphase nicht dehydratisiert wird, sondern als K₄Fe(CN)₆·3H₂O erhalten bleibt. In der Isotherme bei 60°C bleibt die feste Phase — bis zur KOH-Konzentration 15% — K₄Fe(CN)₆·3H₂O. Über diese Konzentration hinaus tritt Entwässerung ein und die feste Phase stellt K₄Fe(CN)₆ dar. Es wurde festgestellt, daß die Eisen(II)-cyanwasserstoffsäure (in kleinen Konzentrationen) die Löslichkeit des Kaliumeisen(II)-cyanids erhöht.

---

Investigation of the salting out and dehydratation effect of potassium hydroxide upon solutions of K₄Fe(CN)₆

The system K₄Fe(CN)₆/KOH/H₂O was investigated by means of physico-chemical analysis. It was shown that at 30° and 40°C KOH has a strong salting out effect upon the solutions of K₄Fe(CN)₆, but the equilibrium solid phase is not dehydrated and remains K₄Fe(CN)₆·3H₂O. In the isotherm at 60°C the solid phase remains K₄Fe(CN)₆·3H₂O up to a concentration of 15% KOH. Beyond this concentration dehydration occurs and the solid phase represents K₄Fe(CN)₆. It was found that H₄Fe(CN)₆ acid (in small concentrations) increases the solubility of K₄Fe(CN)₆.

---

---

Mit 4 Abbildungen     

Gamma-ray induced decomposition of some divalent and trivalent nitrates

Gamma-ray induced decomposition of some divalent nitrates, viz. Mg(NO₃)₂·6H₂O, Ca(NO₃)₂·4H₂O, Sr(NO₃)₂, Ba(NO₃)₂, Zn(NO₃)₂·6H₂O, Cd(NO₃)₂·4H₂O, Hg(NO₃)₂·2H₂O, Mn(NO₃)₂·4H₂O, Cu(NO₃)₂·3H₂O and trivalent nitrates, viz. Al(NO₃)₃·9H₂O, Fe(NO₃)₃·9H₂O, Cr(NO₃)₃·9H₂O, Y(NO₃)₃·6H₂O, In(NO₃)₃·3H₂O, La(NO₃)₃·6H₂O, Ce(NO₃)₃·6H₂O, Pr(NO₃)₃·6H₂O, Bi(NO₃)₃·5H₂O has been studied in solid state at room temperature. G(NO ₂ ^– ) values (after applying appropriate dose correction) have been found to vary in the range 0.12–3.16 and 0.069–2.15 for divalent and trivalent nitrates respectively. G'-values were calculated by dividing G by the ratio of number of electrons in nitrate ion to the total number of electrons in the nitrate salt. Cation size, its polarizing power, available free space in the crystal lattice and the number and location of water molecules seem to play a dominant role in radiolytic decomposition. For Zn, Sr, In, La and Ce nitrates dose variation studies have been carried out.     

Iron(III) Tosylate in the Preparation of Dimethyl and Diethyl Acetals from Ketones and β -Keto Enol Ethers from Cyclic β -Diketones

An efficient method for conversion of ketones to their corresponding dimethyl and diethyl acetals and of cyclic β-diketones into β-keto enol ethers using Fe(OTs)₃ as a catalyst is described.