Magnetically trigged direct electrochemical detection of DNA hybridization using Au67 quantum dot as electrical tracer

A novel gold nanoparticle-based protocol for detection of DNA hybridization based on a magnetically trigged direct electrochemical detection of gold quantum dot tracers is described. It relies on binding target DNA (here called DNA1) with Au(67) quantum dot in a ratio 1:1, followed by a genomagnetic hybridization assay between Au(67)-DNA1 and complementary probe DNA (here called DNA2) marked paramagnetic beads. Differential pulse voltammetry is used for a direct voltammetric detection of resulting Au(67) quantum dot-DNA1/DNA2-paramagnetic bead conjugate on magnetic graphite-epoxy composite electrode. The characterization, optimization, and advantages of the direct electrochemical detection assay for target DNA are demonstrated. The two main highlights of presented assay are (1) the direct voltammetric detection of metal quantum dots obviates their chemical dissolution and (2) the Au(67) quantum dot-DNA1/DNA2-paramagnetic bead conjugate does not create the interconnected three-dimensional network of Au-DNA duplex-paramagnetic beads as previously developed nanoparticle DNA assays, pushing down the achievable detection limits.     

Flow-injection analysis and voltammetric detection of NADH with a poly-Toluidine Blue modified electrode.

Poly-Toluidine Blue film was prepared by electrooxidative polymerization at a glassy carbon electrode in a phosphate buffer solution. The resulting chemically modified electrode (CME) exhibited excellent electrocatalysis toward the oxidation of reduced nicotinamide coenzyme (NADH) with over a 450 mV decrease of the overpotential compared with that at a bare glassy carbon electrode. Two electrochemical determinations of NADH, cyclic voltammetry and flow injection analysis, were established based on the electrocatalytical performance of the resulting modified electrode. Under an identical determinate condition, the voltammetric detection for NADH gave a detection limit of 3.3 micromol L(-1) with a linear concentration range of 9.1 micromol L(-1) to 1.8 mmol L(-1). As a detector in a flow-injection system, the CME gave a detection limit of 0.1 micromol L(-1) for NADH with a linear concentration range of 1.0 micromol L(-1) to 3.2 mmol L(-1). Obviously, flow-injection analysis is superior to voltammetric detection in NADH determination for its lower detection limit and wider detectable linear range.     

A simple aptamer molecular beacon assay for rapid detection of aflatoxin B1

A simple aptamer molecular beacon assay for rapid detection of aflatoxin B1 (AFB1) was achieved. AFB1-binding induced formation of a hairpin structure and closeness of fluorophore label and quencher probe, causing fluorescence decrease.     

Surface plasmon resonance biosensor for the detection of VEGFR-1—a protein marker of myelodysplastic syndromes

The surface plasmon resonance (SPR) biosensor system with dispersionless microfluidics for the direct and label-free detection of a soluble vascular endothelial growth factor receptor (sVEGFR-1) is described. The detection approach takes advantage of an affinity interaction between sVEGFR-1 and its ligand, vascular endothelial growth factor (VEGF-A), which is covalently immobilized on the surface of the SPR sensor. The ability of the immobilized VEGF-A to specifically bind the sVEGFR-1 receptor is demonstrated in a buffer. The detection of sVEGFR-1 in 2% human blood plasma is carried out by using the sequential injection approach. The detection limit of 25 ng/mL is achieved. In addition, we demonstrate that the functional surface of the sensor can be regenerated for repeated use.     

Determination of carbaryl as its primary metabolite, 1-naphthol, by reversed-phase high-performance liquid chromatography with fluorometric detection

Carbaryl and its hydrolysis product, 1-naphthol, are determined simultaneously, and in a mixture of other pesticides, by reversed-phase high-performance liquid chromatography (HPLC). Fluorometric detection affords a higher degree of selectivity than absorbance detection, while providing detection limits of 1.0 ng ml(-1) and 1.4 mg ml(-1) for 1-naphthol and carbaryl, respectively. The described method requires no enrichment of samples and includes a simple hydrolysis step. Additionally, enhancement of fluorescence detection signal intensity is explored through HPLC solvent composition effects as well as through formation of cyclodextrin inclusion complexes. The method described in this report is a selective and fast alternative to the currently accepted U.S. Environmental Protection Agency (EPA) method of detection carbaryl in ground water.     

Determination of phenolic compounds in water using membrane inlet mass spectrometry

Two membrane inlet mass spectrometric (MIMS) methods for determining phenolic compounds in water are described and compared, namely direct analysis and analysis after acetylation of the phenolic compounds. Direct analysis of phenolic compounds in water is a very simple and rapid method and detection limits are relatively low (from 30 mug 1(-1) for phenol to 1000 mug 1(-1) for 4-nitrophenol). Analysis of phenolic compounds after aqueous acetylation is also a very simple and rapid method, and the detection limits are even two orders of magnitude lower than in the direct analysis. For example the detection limit of phenol acetate is 0.5 mug 1(-1) and that of 4-nitrophenol is 10 mug 1(-1). The acetylation method was also tested in the analysis of phenolic compounds from contaminated surface water samples.     

The use of thermal lensing for the determination of pyrogens

Based on the optimized spectrophotometric determination of pyrogens (of various classes ( p-aminophenol and endotoxins), thermal lensing was applied to the determination of these substances at the submicrogram level. The limit of detection of p-aminophenol, a pyrogenic impurity in pharmaceutical formulations of paracetamol, by reaction with resorcinol in alkaline solutions is 100 ng mL(-1). Phloroglucinol was considered as an analog of resorcinol as a reagent in this reaction. The conditions of spectrophotometric determination of pyrogenic lipopolysaccharides (endotoxins) by ion-pair formation with methylene blue (the limit of detection is 100 ng mL(-1)), by ion-pair formation with Stains-All (1-ethyl-2-[3-(1-ethylnaphtho[1,2-d]thiazolin-2-ylidene)-2-methylpropenyl]naphtho[1,2-d]thiazolium bromide) (the limit of detection is 500 ng mL(-1)), and by reaction of 2-keto-3-deoxyoctonic acid with thiobarbituric acid (the limit of detection is 800 ng mL(-1)) were proposed. The optimized procedure for 2-keto-3-deoxyoctonic acid was applied for thermal lensing that provided a decrease in the limit of detection to 70 ng mL(-1) and was also used for lipopolysaccharide determination in the endotoxin standard from E. coli.     

Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

High-performance liquid chromatography of azobenzene derivatives with spectrophotometric and electrochemical detection

The chromatographic behaviour of azobenzene and fourteen of its derivatives was studied by reversed-phase high-performance liquid chromatography with a C18 stationary phase. The optimal composition of the mobile phase is 9:1 methanol-0.01 M aqueous sodium dihydrogen phosphate which is 0.0002 M in ethylenediaminetetraacetic acid, with a pH of 4.5. The solutes can be detected spectrophotometrically, voltammetrically or polarographically. Spectrophotometric measurement in the visible range is more sensitive than in the UV range (detection limits of 0.04-0.1 ng at 410 nm compared with 0.3-0.5 ng at 265 nm). Voltammetric detection is highly sensitive for hydroxy and amino derivatives [detection limits 0.02-0.09 ng at +0.8 V (Ag-AgCl)], whereas for other substances the detection limits are a few nanograms. Polarographic detection is the least sensitive [detection limits 4-8 ng at -0.6 V (Ag-AgCl)]. All the calibration graphs exhibit good linearity, but spectrophotometric detection yields a wider linear dynamic range. Voltammetric detection is more precise at low solute concentrations (relative standard deviations of the peak heights 0.5-1.0% and 1.0-1.5% for voltammetric and spectrophotometric detection, respectively, with amounts of solute from 1 to 10 ng).     

Laser-induced breakdown detection combined with asymmetrical flow field-flow fractionation: application to iron oxi/hydroxide colloid characterization

The combination of asymmetrical flow field-flow fractionation (AsFlFFF) with the laser-induced breakdown detection (LIBD) is presented as a powerful tool for the determination of colloid size distribution at trace particle concentrations. Detection limits (D1) of 1, 4, and 20 microg/L have been determined for a mixture of polystyrene reference particles with 20, 50, and 100 nm in size, respectively. This corresponds to injected masses of 1, 4, and 20 pg, which is lower than found in a previous study with the symmetrical FlFFF (SyFlFFF). The improvement is mainly due to the lower colloid background discharged from the AsFlFFF channel. The combined method of AsFlFFF-LIBD is then applied to the analysis of iron oxi/hydroxide colloids being considered as potential carriers for the radionuclide migration from a nuclear waste repository. Our LIBD arrangement is less sensitive for iron colloid detection as compared to reference polystyrene particles which results in a detection limit of approximately 240 microg/L FeOOH for the AsFlFFF-LIBD analysis. This is superior to the detection via UV-Vis absorbance and comparable to ICP-MS detection. Size information (mean size 11-18 nm) for different iron oxi/hydroxide colloids supplied by the present method is comparable to that obtained by sequential ultrafiltration and dynamic light scattering. A combined on-line ICP-MS detection is used to gain insight into the colloid-borne main and trace elements.     

Protein-templated gold nanoclusters as fluorescence probes for the detection of methotrexate

In this contribution, bovine serum albumin stabilized gold nanoclusters as novel fluorescent probes were successfully utilized for the detection of methotrexate for the first time. Our prepared gold nanoclusters exhibited strong emission with peak maximum at 633.5 nm. However, the addition of methotrexate induced the strong fluorescence intensity of the gold nanoclusters to decrease. The decrease in fluorescence intensity of the gold nanoclusters caused by methotrexate allowed the sensitive detection of methotrexate in the range of 0.0016 μg mL(-1) to 24 μg mL(-1). The detection limit for methotrexate is 0.9 ng mL(-1) at a signal-to-noise ratio of 3. The present sensor for methotrexate detection possessed a low detection limit and wide linear range. In addition, the real samples were analyzed with satisfactory results.     

Silver nanoparticle based label-free colorimetric immunosensor for rapid detection of neurogenin 1

Neurogenin 1 (ngn1), with the functions of controlling the differentiation of neurons, determining specific neuronal subtype, and inhibiting glial differentiation, is quantitatively detected for the first time. By using specifically modified silver nanoparticles (AgNP) as the signaling element, a label-free, rapid and sensitive colorimetric immunoassay for the synthetic peptide fragment of ngn1 (amino acid sequence: AQDDEQERRRRRGRTR) is reported. The detection procedure is based on an anti-aggregation mechanism, by which ngn1 inhibits the aggregation of the probe in the presence of salt (NaClO(4)). The anti-ngn1 antibody conjugated AgNP (denoted as AgNP-Ab) is negatively charged, and mono-binding of the like-charged ngn1 to the probe will increase the surface charge density, hence enhancing the interparticular electrostatic repulsion. Along with the increase of ngn1 concentration, the color of the solution varies from red to yellow, thereby developing a feasible approach for the detection of ngn1. Using a UV/vis spectrophotometer, this assay exhibits a linear response range of two orders of magnitude, from 50 to 800 ng mL(-1), and a detection limit of 30 ng mL(-1). On the basis of these qualities, the antibody-conjugated AgNP may become a useful tool for point-of-care diagnosis of ngn1 and such a method offers a new insight on the detection of the analogous antigen fragment as well.     

High-performance liquid chromatographic analysis for a non-chromophore-containing phosphatidyl inositol analog, 1-((1-O-octadecyl-2-O-methyl-sn-glycero)phospho)-1D-3-deoxy-myo-inositol, using indirect UV detection

Phosphatidylinositide-3-kinase (PI3 kinase) is an important constituent of growth factor regulation. It is also involved in oncogene signaling pathways. An ether-containing phosphatidyl inositol(PI) analog, OMDPI, 1-[(1-O-octadecyl-2-O-methyl-sn-glycero)-phospho]-1D-3-deoxy-myo-inositol, is a potent inhibitor of this pathway and may be clinically useful in the treatment of a variety of neoplasms. OMDPI is currently being investigated as an anti-tumor agent by the National Cancer Institute, NIH. OMDPI, a non-chromophore-containing PI analog, is not directly adaptable to the commonly used UV detection of HPLC. This paper reports the development and validation of an HPLC assay for OMDPI based on indirect UV detection, in which a UV-absorbing ion-pair reagent (the probe), protriptyline, is added to the mobile phase to induce a signal for the compound. The method is sensitive (limit of detection <5 microl of 1 microg/ml or 5 ng), precise (R.S.D.<2.5%), linear (r2=0.9995) and accurate (error<0.7%). It is superior to refractive index detection and evaporative light scattering detection in either sensitivity or linearity and does not require special equipment.     

Surface-enhanced Raman spectroscopic detection of Bacillus subtilis spores using gold nanoparticle based substrates

The detection of bacterial spores requires the capability of highly sensitive and biocompatible probes. This report describes the findings of an investigation of surface-enhanced Raman spectroscopic (SERS) detection of Bacillus subtilis spores using gold-nanoparticle (Au NP) based substrates as the spectroscopic probe. The SERS substrates are shown to be highly sensitive for the detection of B. subtilis spores, which release calcium dipicolinate (CaDPA) as a biomarker. The SERS bands of CaDPA released from the spores by extraction using nitric acid provide the diagnostic signal for the detection, exhibiting a limit of detection (LOD) of 1.5×10(9) spores L(-1) (or 2.5×10(-14) M). The LOD for the Au NP based substrates is quite comparable with that reported for Ag nanoparticle based substrates for the detection of spores, though the surface adsorption equilibrium constant is found to be smaller by a factor of 1-2 orders of magnitude than the Ag nanoparticle based substrates. The results have also revealed the viability of SERS detection of CaDPA released from the spores under ambient conditions without extraction using any reagents, showing a significant reduction of the diagnostic peak width for the detection. These findings have demonstrated the viability of Au NP based SERS substrates for direct use with high resolution and sensitivity as a biocompatible probe for the detection of bacterial spores.     

Electrophoresis microchip fabricated by a direct-printing process with end-channel amperometric detection

We describe the development of an electrophoresis microchip fabricated by a direct-printing process, based on lamination of printed polyester films with end-channel amperometric detection. The channel structures are defined by polyester (base and cover) and by a toner layer (walls). The polyester-toner devices presented an electroosmotic flow (EOF) magnitude of approximately 10(-5) cm2 V(-1) s(-1), which is generated by a polymeric mixture of the toner and polyester composition. The microelectrodes used for detection were produced combining this laser-printer technology to compact discs. The performance of this device was evaluated by amperometric detection of iodide and ascorbate. The detection limits found were 500 nmol.L(-1) (135 amol) and 1.8 micromol.L(-1) (486 amol) for iodide and ascorbate, respectively.     

Determination of Maleic Hydrazide in Potato Samples Using Capillary Electrophoresis with Dual Detection (UV‐Electrochemical)

A new method for the separation of a mixture of different herbicides (propham, chlorpropham, asulam, metamitron, linuron, and maleic hydrazide) using MEKC is proposed. A base‐line separation for the mixture of herbicides is achieved in less than six minutes. The detection limits obtained for all the herbicides were lower than 1.0 μM using UV detection. This separation method was used for the determination of maleic hydrazide in potato samples. If a dual (UV‐electrochemical) detection system is employed, chlorpropham can be also detected. The results obtained showed that electrochemical detection was ten folds more sensitive than UV detection for maleic hydrazide. The detection limit of the proposed method for maleic hydrazide employing electrochemical detection was 1.3 μg g^?1, this value is lower than 50 μg g^?1, which is the maximum residue level permitted for this plant growth regulator in potato samples. The results obtained in the work clearly demonstrate the advantage of using electrochemical detection coupled to capillary electrophoresis, using this detection the concentration limits are not compromised by miniaturization and the components required are simple and inexpensive.     

Electrochemical Immunosensor Made with Zein-based Nanofibers for On-site Detection of Aflatoxin B1

A disposable electrochemical immunosensor for on-site detection of aflatoxin B1(AFB1), one of the most toxic mycotoxins in agri-food products, was fabricated through a low-cost cut-printing method and then modified with zein/polypyrrole(PPy) electrospun nanofibers onto which anti-AFB1 monoclonal antibodies were immobilized covalently. Fabrication was possible with an innovative and simple approach to adsorb nanofibers onto the working electrode during electrospinning. Electrochemical impedance spectroscopy was employed as the principle of detection, and the data collected with a portable potentiostat were treated with information visualization techniques. The nanostructured immunosensor showed a high sensitivity for AFB1 with a linear detection range from 0.25 to 10 ng mL⁻¹ and a theoretical limit of detection of 0.092 ng mL⁻¹, which is adequate to detect AFB1 in food, according to regulatory agencies.     

液相色谱－电致化学发光检测系统的检测性能研究

使用几种常见的反相液相色谱介质和４种多环化合物对液相色谱交流电致化学发光检测系统的性能进行了测试，结果表明：检测器对４种化合物的检测限均可达到２．０ｎｇ，线性范围达３个数量级。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

Ion chromatography determination of trace level bromate by large volume injection with conductivity and spectrophotometric detection after post column derivatisation

Bromate is a well known by-product produced by the ozonisation of drinking water; the allowed concentration for human consumption has to be regulated to the low microg l(-1) range. A direct injection, ion chromatographic method was developed using a tetraborate eluent with serially connected conductivity and spectrophotometric detection. Bromate was detected after post-column reaction with fuchsin at 520 nm. Sample capacity was investigated by injecting large volumes (up to 6 ml) using a high total hardness and chloride tap water. Linear correlation of bromate response with volumes from 1 ml to 6 ml was demonstrated, the main limitation being the overlapping of the chloride peak with bromate. Up to 1.5 ml sample can be injected without any pre-treatment. With more than 1.5 ml injection volume, a sample pre-treatment with a cartridge in Ag and H form, followed by a 10 min degassing in an ultrasonic bath, was needed. This method was validated by analysing secondary reference materials and real samples from a drinking water treatment plant. The method was linear from the limit of quantification to 20 microg l(-1). Reproducibilities in tap water were 18% (5 microg l(-1), n=12) and 21% (1 microg l(-1), n=4) respectively for 1.5 and 6 ml injection volumes with conductivity detection, and 17% at 0.5 microg l(-1) (n=9) with spectrophotometric detection. Calculated detection limits were 0.5 microg l(-1) (6 ml) ahd 2 microg l(-1) (1.5 ml) for conductivity detection and 0.3 microg l(-1) (1.5 ml) for spectrophotometric detection.