An odyssey of lithium metal anode in liquid lithium–sulfur batteries

Lithium–sulfur (Li–S) batteries exhibit outstanding energy density and material sustainability. Enormous effects have been devoted to the sulfur cathode to address redox kinetics and polysulfide intermediates shuttle. Recent attentions are gradually turning to the protection of the lithium metal anodes, since electrochemical performances of Li–S batteries are closely linked to the working efficiency of the anode side, especially in pouch cells that adopt stringent test protocols. This Perspective article summarizes critical issues encountered in the lithium metal anode, and outlines possible solutions to achieve efficient working lithium anode in Li–S batteries. The lithium metal anode in Li–S batteries shares the common failure mechanisms of volume fluctuation, nonuniform lithium flux, electrolyte corrosion and lithium pulverization occurring in lithium metal batteries with oxide cathodes, and also experiences unique polysulfide corrosion and massive lithium accumulation. These issues can be partially addressed by developing three-dimensional scaffold, exerting quasi-solid reaction, tailoring native solid electrolyte interphase (SEI) and designing artificial SEI. The practical evaluation of Li–S batteries highlights the importance of pouch cell platform, which is distinguished from coin-type cells in terms of lean electrolyte-to-sulfur ratio, thin lithium foil, as well as sizable total capacity and current that are loaded on pouch cells. This Perspective underlines the development of practically efficient working lithium metal anode in Li–S batteries.     

Synthesis of lithium metal silicates for lithium ion batteries

Synthesis strategies, nanostructures, and different electrochemical performances are prominent features of rechargeable batteries. Three types Li₂MSiO₄ cathode metarials for lithium ion batteries:Li₂FeSiO₄, Li₂MnSiO₄, and Li₂CoSiO₄ are scientifically discussed, and the comprehensive summaries and evaluations are given in this review.     

Inhibition of lithium dendrites and dead lithium by an ionic liquid additive toward safe and stable lithium metal anodes

The uncontrolled growth of lithium dendrites and accumulation of “dead lithium” upon cycling are among the main obstacles that hinder the widespread application of lithium metal anodes. Herein, an ionic liquid (IL) consisting of 1-methyl-1-propylpiperidinium cation (Pp₁₃⁺) and bis(fluorosulfonyl)imide anion (FSI^?), was chosen as the additive in propylene carbonate (PC)-based liquid electrolytes to circumvent the shortcoming of lithium metal anodes. The optimal 1% Pp₁₃FSI acts as the role of electrostatic shielding, lithiophobic effect and participating in the formation of solid electrolyte interface (SEI) layer with enhanced properties. The in-situ optical microscopy records that the addition of IL can effectively inhibit the growth of lithium dendrites and the corrosion of lithium anode. This study delivers an effective modification to optimize electrolytes for stable lithium metal batteries.     

Two-dimensional vermiculite separator for lithium sulfur batteries

A lamellar vermiculite separator assembled with exfoliation vermiculites is developed for lithium sulfur batteries. The vermiculite separator can simultaneously suppress the parasitic reactions induced by polysulfide intermediate shuttle, and prevent the short circuit by potential lithium dendrite penetration with the ultrahigh Young's modulus.     

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

Lithium (Li) metal, possessing an extremely high theoretical specific capacity (3860 mAh/g) and the most negative electrode potential (−3.040 V vs. standard hydrogen electrode), is one the most favorable anode materials for future high-energy-density batteries. However, the poor cyclability and safety issues induced by extremely unstable interfaces of traditional liquid Li metal batteries have limited their practical applications. Herein, a quasi-solid battery is constructed to offer superior interfacial stability as well as excellent interfacial contact by the incorporation of Li@composite solid electrolyte integrated electrode and a limited amount of liquid electrolyte (7.5 μL/cm²). By combining the inorganic garnet Al-doped Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZO) with high mechanical strength and ionic conductivity and the organic ethylene-vinyl acetate copolymer (EVA) with good flexibility, the composite solid electrolyte film could provide sufficient ion channels, sustained interfacial contact and good mechanical stability at the anode side, which significantly alleviates the thermodynamic corrosion and safety problems induced by liquid electrolytes. This innovative and facile quasi-solid strategy is aimed to promote the intrinsic safety and stability of working Li metal anode, shedding light on the development of next-generation high-performance Li metal batteries.     

Fluorimetric determination of lithium with dibenzothiazolylmethane

Lithium is determined by measuring the fluorescence produced on reaction with dibenzothiazolylmethane; zinc is the only other metal that fluoresces. The practical limits for the determination of lithium in salts are from 0.5 to 20 μg although 0.01 μg can be determined in pure solutions.     

Liquid ion-exchange membrane electrode for lithium

An electrode selective for lithium relative to other alkali metal ions is described. The sensor is based on n-decanol as both the liquid membrane and exchanger. The electrode exhibits more than 3 decades of linear near-Nernstian response and has selectivity comparable to the LAS 15-25 glass univalent-cation electrode.     

Highly efficient separation of lithium chloride from seawater

A complexing reagent composed of two bipyridine moieties enabled the efficient separation of lithium chloride through liquid membrane from seawater, in which 0.005% lithium chloride is contained (more than 99% metal chlorides are NaCl, KCl, MgCl2, and CaCl2). That is, two separations by our liquid membrane changed the molar ratio of LiCl from 0.005% to 80%. The striking characteristic of this compound is that the lithium ion is separated efficiently from alkali and alkaline earth metal ions without the lipophilic anion. Thus this new membrane system contructed by us offers a low-energy, low-cost, and environmentally friendly method to enable the routine use of lithium chloride separation from seawater.     

The recent advances in constructing designed electrode in lithium metal batteries

In this review, we focus on the design of lithium electrode and its recent advancements, which suppress the growth of lithium dendrites and improve the performance of the rechargeable batteries. To suppress the growth of lithium dendrites, the general design rules of the system require a uniform lithium ion flux, a low current density, a homogeneous nucleation process and a stable SEI layer. Improvements of the battery performance have been achieved through the delicate design of lithium electrode and here they are summarized into three groups:i) optimizing the 3D porous nanostructure of the current collector, ii) constructing rational host for lithium metal and prelithiating the 3D host matrix with molten lithium, iii) protecting the surface of lithium metal by functional layers. An outlook of the challenges and the potentials of lithium metal battery is also provided, which will facilitate the future development of lithium metal battery.     

Recent progress in liquid electrolytes for lithium metal batteries

Li metal batteries are revived as the next-generation batteries beyond Li-ion batteries. The Li metal anode can be paired with intercalation-type cathodes LiMO₂ and conversion-type cathodes such as sulfur and oxygen. Then, energy densities of Li/LiMO₂ and Li/S,O₂ batteries can reach 400 Whkg^?1 and more than 500 Whkg^?1, respectively, which surpass that of the state-of-the-art LIB (280 Whkg^?1). However, replacing the intercalation-type graphite anode with the Li metal anode suffers from low coulombic efficiency during repeated Li plating/stripping processes, which leads to short cycle lifetime and potential safety problems. The key solution is to construct a stable and uniform solid electrolyte interphase with high Li⁺ transport and high elastic strength on the Li metal anode. This review summarizes recent progress in improving the solid electrolyte interphase by tailoring liquid electrolytes, a classical but the most convenient and cost-effective strategy.     

The application of nanostructured transition metal sulfides as anodes for lithium ion batteries

With wide application of electric vehicles and large-scale in energy storage systems, the requirement of secondary batteries with higher power density and better safety gets urgent. Owing to the merits of high theoretical capacity, relatively low cost and suitable discharge voltage, much attention has been paid to the transition metal sulfides. Recently, a large amount of research papers have reported about the application of transition metal sulfides in lithium ion batteries. However, the practical application of transition metal sulfides is still impeded by their fast capacity fading and poor rate performance. More well-focused researches should be operated towards the commercialization of transition metal sulfides in lithium ion batteries. In this review, recent development of using transition metal sulfides such as copper sulfides,molybdenum sulfides, cobalt sulfides, and iron sulfides as electrode materials for lithium ion batteries is presented. In addition, the electrochemical reaction mechanisms and synthetic strategy of transition metal sulfides are briefly summarized. The critical issues, challenges, and perspectives providing a further understanding of the associated electrochemical processes are also discussed.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

Transmetallation reactions of a lithium disilenide

The first magnesium, copper and zinc disilenides were prepared via transmetallation reactions of a lithium disilenide and structurally characterised. The copper and zinc derivatives show red-shifted UV/vis absorptions due to admixture of metal d-orbitals to the highest occupied molecular orbital.     

Nonflammable nonaqueous electrolytes for lithium batteries

As the energy density of state-of-the-art lithium (Li)-ion batteries (LIBs) increases, the safety concern of LIBs using liquid electrolytes is drawing increasing attention. Flammability of electrolytes is a critical link of the overall safety performance of LIBs and Li metal batteries. For this reason, intensive efforts have been devoted to suppressing the flammability of liquid electrolytes. In this short review, the common approaches to reduce the flammability of the nonaqueous liquid electrolytes will be summarized. The advantages and limitations of these approaches will also be discussed.     

Bottom-up lithium growth guided by Ag concentration gradient in 3D PVDF framework towards stable lithium metal anode

Three-dimensional(3 D)frameworks have received much attention as an effective modification strategy for next-generation high-energy-density lithium metal batteries.However,the top-growth mode of lithium(Li)on the 3 D framework remains a tough challenge.To achieve a uniform bottom-up Li growth,a scheme involving Ag concentration gradient in 3 D PVDF framework(C-Ag/PVDF)is proposed.Ag nanoparticles with a concentration gradient induce an interface activity gradient in the 3 D framework,and this gradient feature is still maintained during the cycle.As a result,the C-Ag/PVDF framework delivers a long lifespan over 1800 h at a current density of 1 mA cm^-2 with a capacity of 1 mAh cm^-2,and shows an ultra-long life(>1300 h)even at a high current density of 4 mA cm^-2 with a capacity of 4 mAh cm^-2.The advantage of concentration gradient provides further insights into the optimal design of the 3 D framework for stable Li metal anode.     

The lithium intercalation into graphite from electrolyte and from solid lithium

The values of diffusion coefficient (D) of lithium in thermoexpanded graphite during cathodic intercalation from aprotic electrolyte, and upon direct contact with lithium metal, are measured. In the first case galvanostatic switch-on curves were registered, in the second case the method of x-ray diffraction was used. In the both cases D was close to 10^-10 cm²/s.Presented at the 3rd International Meeting "Advanced Batteries and Accumulators," June 16th–20th 2002, Brno, Czech Republic     

Trace analysis of lithium metal by PIXE

A rapid method is described for simultaneous trace determination of metallic impurities in lithium metal by Particle Induced X-ray Emission (PIXE) technique. The impurities were preconcentrated by ion-exchange separation using a weak cation exchanger, Bio Rex-70 and analyzed by 2.34 MeV protons. The reliability of the method was tested by analyzing synthetic samples having several metallic impurities at 1–5 ppm range.     

Electrolyte additive maintains high performance for dendrite-free lithium metal anode

Because of their high capacity and low potential, lithium metal anodes are considered to be promising candidates for next generation electrode materials. However, the safety concerns and limited cycling life associated with uncontrollable dendrite growth hamper practical applications. In this work, the acidified cellulose ester, which is a mixed fiber microporous membrane film, was used as a novel electrolyte additive that effectively improves the cycle stability of the lithium metal anode and inhibits dendrite growth. The focus of this paper is on inhibiting the formation and growth of lithium dendrites. The coulombic efficiency of a Li|Cu battery with this acidified cellulose ester additive remains stable at 99% after 500 cycles under a current density of 1 mA/cm². Symmetric batteries also remain stable after 500 cycles (1000 h) under a current density of 1 mA/cm². These superior properties can be ascribed to the induced nucleation and the uniform distribution of lithium ion flux. This study uncovers an approach for effectively enabling stable cycling of dendrite-free lithium metal anodes.     

Recent advances in metal-organic frameworks for lithium metal anode protection

The lithium metal battery has been considered as a promising candidate for next generation batteries.However,safety concerns caused by uncontrollable lithium dendrite growth on lithium anode are severely hampering the commercial application.Metal-organic frameworks(MOFs)become one of the most attractive materials due to the high porosity,structural designability and tunability.With unique open channels and pores as well as functional components in MOFs,the transportation and deposition of lithium ions can be regulated,which leads to enhanced electrochemical prope rties.Various strategies for lithium metal protection are proposed in recent wo rks on applications of MOFs in lithium metal batteries.In this review,we highlight latest key approaches in this field and discuss the prospects for MOFs in advanced Li anodes.     

锂离子二次电池碳负极材料的改性

作为锂离子二次电池的碳负极材料，其改性方面的研究内容主要有：引入非金属元素，引入金属元素，处理表面及其它方面。纺入的非金属元素有硼，硅，氮，磷和硫。引入的金属元素有钾，铝，镓和钒，镍，钴，铜，铁等过渡金属元素。表面处理的方法包括氧化，形成表面层等。