NiB和NiP超细非晶合金的退火晶化行为及催化性能

 采用X射线吸收精细结构（XAFS）,X射线衍射（XRD）和差热分析（DTA）等方法研究了以化学还原法制备的NiB和NiP超细非晶态合金催化剂在退火过程中的结构变化．XRD结果表明,在300℃下退火时,NiB超细非晶态合金晶化生成纳米晶Ni3B亚稳物相,NiP超细非晶态合金则主要晶化生成金属Ni和部分晶态Ni3P的混合物相;在500℃退火且近于完全晶化的条件下,大部分超细非晶态合金都晶化为金属Ni．XAFS结果定量地说明,对于NiB和NiP初始样品,第一近邻Ni－Ni配位的平均键长Rj分别为0.274和0.271nm,其结构无序度σS很大,分别为0.033和0.028nm,其热无序度σT分别为0.0069和0.0060nm．300℃退火后,晶化生成的Ni3B的Ni－Ni配位的σS降低到初始样品的33％,仅为0.011nm．500℃退火后,NiB样品的结构参数与金属Ni基本一致,但NiP样品的Ni－Ni配位的σS还远大于σT,仍为0.0125nm,表明NiB和NiP超细非晶态合金的退火晶化行为有很大的差别．纳米晶Ni3B催化苯加氢反应的转化率比超细Ni－B非晶态合金或多晶金属Ni更高,表明纳米晶Ni3B中的Ni与B原子组成了苯加氢催化反应的活性中心．     

Ni-P/SiO_2催化剂晶化过程及其加氢活性研究

采用化学还原法制备了负载型Ni－P／SiO2非晶态合金催化剂．应用ICP、BET、氢氧滴定法、XRD、SEM、XPS研究了上述催化剂在高温晶化过程中的表面结构、表面形貌和表面电子态的变化。测定了Ni－P／SiO2非晶态合金晶化前后对其液相苯甲醛加氢反应催化活性和选择性,并讨论了非晶态合金催化剂晶化过程中结构变化对催化性能的影响．     

热处理对化学沉积Ni-Fe-P合金性能的影响

采用DSC和XRD研究了化学镀Ni-Fe-P合金的晶化行为和结构.结果表明,镀态合金呈非晶结构, 367.6 ℃下热处理出现亚稳态Ni5P2(P3)和Fe-Ni(Im3m), 499.2 ℃下热处理进一步晶化为稳定的Ni3P(I-4)和FeNi3(Pm3m).采用磁性能实验和在w=3.5％氯化钠溶液浸泡实验以及阳极极化实验研究了热处理对镀层磁性能和耐腐蚀性的影响.结果表明,该镀层在镀态时几乎没有磁性,随着退火温度的升高,磁性能不断提高. 400 ℃以后,镀层的饱和磁化强度和矫顽力随着退火温度升高而急剧上升.浸泡实验和阳极极化实验结果均表明镀态镀层比经热处理后的镀层在w=3.5％氯化钠溶液中具有更好的耐腐蚀性,但是它们的阳极极化行为不同.     

镍-镧合金的电沉积及其晶化行为与析氢性能

在尿素-溴化钠熔体中电沉积Ni-La合金,考察了合金的沉积行为和阴极电流密度对合金组成和表面形貌的影响。结果表明,镧与镍经过诱导共沉积形成Ni-La合金;随着阴极电流密度的增加,镀层中镧含量先升高后降低（在15 mA·cm^-2条件下达到最高）,镀层表面微粒变大。用热分析技术和X射线衍射研究了Ni89.7La10.3合金的晶化行为,该合金在镀态时呈非晶态结构,在446.1℃热处理后的镀层晶化生成面心立方Ni-La相（Fm3m）。采用电化学技术研究了该镀层的电催化析氢性能,实验证实Ni89.7La10.3合金的电催化析氢性能优于镍。     

聚苯胺微管表面化学镀镍与电磁特性研究

采用原位掺杂的方法合成了聚苯胺微管,使用化学镀方法制备聚苯胺微管/Ni复合材料,运用X射线粉末衍射(XRD)和能量色散光谱(EDS)研究了聚苯胺微管化学镀镍前后的微观结构;利用UV-VIS吸收光谱研究了聚苯胺微管表面镀镍过程中SnCl2敏化、PdCl2活化以及镀液温度对聚苯胺微管主链结构的影响;采用波导法研究了聚苯胺微管化学镀镍前后在8.2～12.4GHz频段内的电磁参数.研究发现:聚苯胺微管表面均匀地沉积了一层紧密Ni镀层,Ni介于晶态和非晶态之间,并有少量Ni3P;SnCl2敏化、PdCl2活化过程对聚苯胺主链影响不大,施镀温度对聚苯胺微管主链结构影响很大,35℃时,主链结构变化最小,随着温度的增高,聚苯胺还原程度变大.     

低磷化学镀镍层的组成和结构

用SEM、XPS、AES和X-射线衍射法研究了低磷化学镀镍层的形貌、结晶状态、组成元素及其价态和深度分布。结果表明,低磷化学镀镍磷合金层为层状结构,镀态的镀层由低晶态的Ni和Ni_2P组成,350℃热处理1小时后转化为完全晶态的Ni和Ni_3P。镍和磷均为零价态,它们的结合能分别为129.1ev和852.3eV。镀层的真实组成(相对原子百分浓度)为:Ni 85.4%,P 10.1%,O 4.5%。     

Ni-B和Ni-Ce-B超细非晶态合金的退火晶化及其催化性能

 采用XAFS,XRD和DTA方法研究了Ni－B和Ni－Ce－B超细非晶态合金在退火过程中的结构变化及其结构与催化性能的关系．活性结果表明,在退火温度为623K时,Ni－B和Ni－Ce－B样品的苯加氢催化反应转化率最高,分别为63％和81％,0．3％Ce的掺入提高了Ni－Ce－B的催化活性．DTA结果表明,Ni－B超细非晶态合金在598和653K有两个晶化峰,而Ni－Ce－B样品有548,603,696和801K四个晶化峰．XAFS和XRD结果进一步说明,在573K退火时,Ni－B样品晶化生成晶态Ni3B和纳米晶Ni,此时Ni－Ce－B仅有少量晶态Ni3B生成．在673K退火时,Ni－B样品中的Ni3B开始分解生成晶态Ni,同时纳米晶Ni聚集并形成大颗粒晶态Ni,而Ni－Ce－B样品晶化生成晶态Ni3B和纳米晶Ni．在773K和更高的温度退火处理后,Ni－B样品中Ni的局域环境结构与金属Ni箔基本一致,但Ni－Ce－B样品晶化生成的Ni晶格有较大畸变,同时Ni3B并未分解．说明0．3％的Ce对提高Ni－Ce－B样品的稳定性有显著作用．本文首次报道了Ni－B和Ni－Ce－B超细非晶态合金中苯加氢催化活性中心为纳米晶Ni和类似于金属Ni的Ni－B非晶态合金．     

退火前后镍钨硼合金电沉积层的结构与性能

采用电化学技术、XPS、DSC、XRD等方法研究Ni W B合金电沉积及热处理前后合金镀层的结构和显微硬度.结果表明,在Ni W B合金电沉积过程中伴随着化学沉积镍等过程以及Na2B4O7在镀层中的夹杂;Ni W和Ni W B合金电沉积层分别表现为纳米晶结构和非晶态结构;热处理过程中合金电沉积层发生晶粒粗化过程以及Ni W B合金镀层发生新相形成过程,产生Ni4W和镍硼化物如Ni2B、Ni3B等沉淀物;400 ℃热处理2 h后Ni W合金镀层有最大的显微硬度达919.8 kg•mm－2,而在500 ℃下Ni W B合金有最大的硬度达1132.2 kg•mm－2.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

EXAFS研究Ni-B和Ni-Ce-B超细非晶态合金的退火晶化

采用同步辐射EXAFS技术定量地研究化学还原法制备的Ni-B和Ni-Ce-B超细非晶态合金中Ni原子的局域环境结构随退火温度升高而产生的变化,结果表明,对于Ni-B和Ni-Ce-B超细非晶态合金初始样品：Ni-Ni最邻近配位壳层的平均键长RNi-Ni、配位数N、热无序σT、结构无序σs分别为0．275nm,11.9.0.0069nm,0.034nm;0.276nm,12.4,0.0067nm,0.035nm,Ni-B最邻近配位壳层的RNi-B,N, σT,σs分别为0．215nm,2.7,0.0055nm,0.0048nm;0.214nm,2.0,0.0058nm,0.0042nm,Ni-Ni配位的σs很大,是其σT的4－5倍,比Ni－B配位的σs大近一个数量级,在300℃退火后,Ni－B样品开始发生晶化生成晶态Ni3B,其RNi-Ni和σs分别为0．254nm和0．011nm,σs降低近2倍;而．3％原子比的Ce掺入后使Ni-Ce-B超细非晶态合金的晶化温度升高100℃左右。在500℃退火后,Ni－B样品的结构参数与Ni箔的相近,但Ni-Ce-B样品中的Ni-Ni配位的σs仍为0．0073nm,Ni-B配位的N为1．2,表明稀土元素Ce（以CeO2)显著增强了Ni与B的相互作用,且同时使退火晶化成的Ni晶结构产生畸变。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.