甲烷在清洁 Pd(111) 及氧改性的 Pd(111) 表面解离的密度泛函理论研究

 采用广义梯度近似 (GGA) 的密度泛函理论 (DFT) 并结合平板模型, 研究了 CH4 在清洁 Pd(111) 及 O 改性的 Pd(111) 表面发生 C朒 键断裂的反应历程. 优化了裂解过程中反应物、过渡态和产物的几何构型, 获得了反应路径上各物种的吸附能及反应的活化能. 结果表明, CH4 采用一个 H 原子指向表面的构型在 Pd(111) 表面的顶位吸附, CH3 的最稳定的吸附位置为顶位, OH, O 和 H 的最稳定吸附位置均为面心立方. CH4 在清洁 Pd(111) 表面裂解的活化能为 0.97 eV, 低于它在 O 原子改性 (O 没有参与反应) 的 Pd(111) 表面的活化能 1.42 eV, 说明表面氧原子抑制了 CH4 中 C朒 键的断裂. 当亚表面 O 原子和表面 O 原子 (O 参与反应) 共同存在时, C朒 键断裂的活化能为 0.72 eV, 低于只有表层氧存在时的活化能 (1.43 eV), 说明亚表面的 O 原子对 CH4 分子的活化具有促进作用. CH4 在 O 原子改性的 Pd(111) 表面裂解生成 CH3 和 H, 以及生成 CH3 和 OH 的反应活化能分别为 1.42 和 1.43 eV, 说明 CH4 在 O 原子改性的 Pd(111) 表面发生这两种反应的难易程度相当.     

Theoretical calculation of the dehydrogenation of ethanol on a Rh/CeO2(111) surface

We applied periodic density-functional theory (DFT) to investigate the dehydrogenation of ethanol on a Rh/CeO2 (111) surface. Ethanol is calculated to have the greatest energy of adsorption when the oxygen atom of the molecule is adsorbed onto a Ce atom in the surface, relative to other surface atoms (Rh or O). Before forming a six-membered ring of an oxametallacyclic compound (Rh-CH2CH2O-Ce(a)), two hydrogen atoms from ethanol are first eliminated; the barriers for dissociation of the O-H and the beta-carbon (CH2-H) hydrogens are calculated to be 12.00 and 28.57 kcal/mol, respectively. The dehydrogenated H atom has the greatest adsorption energy (E(ads) = 101.59 kcal/mol) when it is adsorbed onto an oxygen atom of the surface. The dehydrogenation continues with the loss of two hydrogens from the alpha-carbon, forming an intermediate species Rh-CH2CO-Ce(a), for which the successive barriers are 34.26 and 40.84 kcal/mol. Scission of the C-C bond occurs at this stage with a dissociation barrier Ea = 49.54 kcal/mol, to form Rh-CH(2(a)) + 4H(a) + CO(g). At high temperatures, these adsorbates desorb to yield the final products CH(4(g)), H(2(g)), and CO(g).     

水在HfO2(111)和(110)表面的吸附与解离

运用广义梯度近似密度泛函理论方法(GGA-PW91)结合周期平板模型, 研究水分子在二氧化铪(111)和(110)表面不同吸附位置在不同覆盖度下的吸附行为. 通过比较不同吸附位的吸附能和几何构型参数发现:(111)和(110)表面铪原子(top 位)是活性吸附位. 水分子与表面的吸附能值随覆盖度的变化影响较小. 在(111)和(110)表面, 水分子都倾向以氧端与表面铪原子相互作用. 同时也计算了羟基、氧和氢在表面的吸附, Mulliken 电荷布居, 态密度及部分频率. 结果表明, 在两种表面羟基以氧端与表面铪相互作用, 氧原子与表面铪和氧原子同时成键, 而氢原子直接与表面氧原子相互作用形成羟基. 通过过渡态搜索, 水分子在(111)和(110)表面发生解离, 反应能垒分别为9.7和17.3 kJ·mol^-1, 且放热为59.9和47.6 kJ·mol^-1.     

Theoretical study of the CH2 + O photodissociation of formaldehyde adsorbed on the Ag(111) surface

Configuration interaction calculations of the ground and excited states of the H2CO molecule adsorbed on the Ag(111) surface have been carried out to study the photoinduced dissociation process leading to polymerization of formaldehyde. The metal-adsorbate system has been described by the embedded cluster and multireference configuration interaction methods. The pi electron-attachment H2CO- and n-pi* internally excited H2CO* states have been considered as possible intermediates. The calculations have shown that H2CO* is only very weakly bound on Ag(111), and thus that the dissociation of adsorbed formaldehyde due to internal excitation is unlikely. By contrast, the H2CO- anion is strongly bound to Ag(111) and gains additional vibrational energy along the C-O stretch coordinate via Franck-Condon excitation from the neutral molecule. Computed energy variations of adsorbed H2CO and H2CO- at different key geometries along the pathway for C-O bond cleavage make evident, however, that complete dissociation is very difficult to attain on the potential energy surface of either of these states. Instead, reneutralization of the vibrationally excited anion by electron transfer back to the substrate is the most promising means of breaking the C-O bond, with subsequent formation of the coadsorbed O and CH2 fragments. Furthermore, it has been demonstrated that the most stable state for both dissociation fragments on Ag(111) is a closed-shell singlet, with binding energies relative to the gas-phase products of approximately 3.2 and approximately 1.3 eV for O and CH2, respectively. Further details of the reaction mechanism for the photoinduced C-O bond cleavage of H2CO on the Ag(111) surface are also given.     

Coverage dependence and hydroperoxyl-mediated pathway of catalytic water formation on Pt (111) surface

Hydrogen oxidation on Pt (111) surface is modeled by density functional theory (DFT). Previous DFT calculations showed too large O2 dissociation barriers, but we find them highly coverage dependent: when the coverage is low, dissociation barriers close to experimental values (approximately 0.3 eV) are obtained. For the whole reaction, a new pathway involving hydroperoxyl (OOH) intermediate is found, with the highest reaction barrier of only approximately 0.4 eV. This may explain the experimental observation of catalytic water formation on Pt (111) surface above the H2O desorption temperature of 170 K, despite that the direct reaction between chemisorbed O and H atoms is a highly activated process with barrier approximately 1 eV as previous calculations showed.     

A First‐Principle Calculation of Sulfur Oxidation on Metallic Ni(111) and Pt(111), and Bimetallic Ni@Pt(111) and Pt@Ni(111) Surfaces

Sulfur, a pollutant known to poison fuel‐cell electrodes, generally comes from S‐containing species such as hydrogen sulfide (H₂S). The S‐containing species become adsorbed on a metal electrode and leave atomic S strongly bound to the metal surface. This surface sulfur is completely removed typically by oxidation with O₂ into gaseous SO₂. According to our DFT calculations, the oxidation of sulfur at 0.25 ML surface sulfur coverage on pure Pt(111) and Ni(111) metal surfaces is exothermic. The barriers to the formation of SO₂ are 0.41 and 1.07 eV, respectively. Various metals combined to form bimetallic surfaces are reported to tune the catalytic capabilities toward some reactions. Our results show that it is more difficult to remove surface sulfur from a Ni@Pt(111) surface with reaction barrier 1.86 eV for SO₂ formation than from a Pt@Ni(111) surface (0.13 eV). This result is in good agreement with the statement that bimetallic surfaces could demonstrate more or less activity than to pure metal surfaces by comparing electronic and structural effects. Furthermore, by calculating the reaction free energies we found that the sulfur oxidation reaction on the Pt@Ni(111) surface exhibits the best spontaneity of SO₂ desorption at either room temperature or high temperatures.     

Agostic interactions and dissociation in the first layer of water on Pt(111)

Recent quantum mechanical (QM) calculations for a monolayer of H(2)O on Ru(0001) suggested a novel stable structure with half the waters dissociated. However, different studies on Pt(111) suggested an undissociated bilayer structure in which the outer half of the water has the OH bonds toward the surface rather than the O lone pair. Since water layers on Pt are important in many catalytic processes (e.g., the fuel cell cathode), we calculated the energetics and structure of the first monolayer of water on the Pt(111) surface using QM [periodic slab using density functional calculations (DFT) with the PBE-flavor of exchange-correlation functional]. We find that the fully saturated surface ((2)/(3) ML) has half the water almost parallel to the surface (forming a Pt-O Lewis acid-base bond), whereas the other half are perpendicular to the surface, but with the H down toward the surface (forming a Pt-HO agostic bond). This leads to a net bond energy of 0.60 eV/water = 13.8 kcal/mol (the standard ice model with the H up configuration of the water molecules perpendicular to the surface is less stable by 0.092 eV/water = 2.1 kcal/mol). We examined whether the partial dissociation of water proposed for Ru(0001) could occur on Pt(111). For the saturated water layer ((2)/(3) ML) we find a stable structure with half the H(2)O dissociated (forming Pt-OH and Pt-H covalent bonds), which is less favorable by only 0.066 eV/water = 1.51 kcal/mol. These results confirm the interpretation of combined experimental (XAS, XES, XPS) and theoretical (DFT cluster and periodic including spectrum calculations) studies, which find only the H down undissociated case. We find that the undissociated structure leads to a vertical displacement between the two layers of oxygens of approximately 0.42 A (for both H down and H up). In contrast, the partially dissociated system leads to a flat structure with a separation of the oxygen layers of 0.08 A. Among the partially dissociated systems, we find that all subsurface positions for the dissociated hydrogen are less favorable than adsorbing on top of the free Pt surface atom. Our results suggest that for less than (1)/(3) ML, clustering would be observed rather than ordered monolayer structures.     

Au(111)表面上乙醇选择性氧化反应机理的密度泛函理论研究(英文)

采用密度泛函理论研究了吸附有O原子的Au(111)表面上乙醇选择性氧化的反应机理.反应结果表明,除O原子和中间产物二齿醋酸根(CH3CHOO)外,其他中间产物在Au(111)表面扩散能垒均较低,不会对反应速控步骤的确定造成影响.乙醇羟基氧化脱氢为反应的第一步骤,当氧化剂为吸附态的O原子或者为OH基时,反应活化能分别为0.20和0.17eV.氧化产物乙氧基(CH3CH2O)进一步氧化脱氢生成乙醛则需要表面吸附的O原子或另一表面吸附的OH基的参与,所需活化能为0.29或0.27eV.同时,乙醛易与表面吸附的乙氧基反应生成乙氧基半缩醛(CH3CHOOC2H5),其可进一步与O原子作用,脱氢形成乙酸乙酯.此外,在乙醛深度氧化成酸的过程中需要克服较高的反应能垒,因而在表面反应温度较低时无法进行,这与实验结果相符.     

High resolution electron energy loss measurements of Na/Cu(111) and H2O/Na/Cu(111): dependence of water reactivity as a function of Na coverage

Collective electronic excitations occurring in Na layers grown on Cu(111) and in H2O/Na/Cu(111) have been investigated at room temperature by high resolution electron energy loss spectroscopy. Loss spectra taken for a coverage between 0.55 and 0.70 ML of Na are characterized by a feature at 3.0 eV assigned to a Mie resonance. Further increasing the Na coverage leads to the appearance of the Na surface plasmon at 3.9 eV. Water molecules dissociate on Na layers as shown by the appearance of the OH-Na vibration. Upon water adsorption, relevant effects on both electronic excitations and vibrational modes were observed as a function of Na coverage.     

Kinetic mechanism of methanol decomposition on Ni(111) surface: a theoretical study

The decomposition of methanol on the Ni(111) surface has been studied with the pseudopotential method of density functional theory-generalized gradient approximation (DFT-GGA) and with the repeated slab models. The adsorption energies of possible species and the activation energy barriers of the possible elementary reactions involved are obtained in the present work. The major reaction path on Ni surfaces involves the O-H bond breaking in CH(3)OH and the further decomposition of the resulting methoxy species to CO and H via stepwise hydrogen abstractions from CH(3)O. The abstraction of hydrogen from methoxy itself is the rate-limiting step. We also confirm that the C-O and C-H bond-breaking paths, which lead to the formation of surface methyl and hydroxyl and hydroxymethyl and atom hydrogen, respectively, have higher energy barriers. Therefore, the final products are the adsorbed CO and H atom.     

Mechanistic study of the electrochemical oxygen reduction reaction on Pt(111) using density functional theory

Density functional theory (DFT) was used to study the electrolyte solution effects on the oxygen reduction reaction (ORR) on Pt(111). To model the acid electrolyte, an H(5)O(2)(+) cluster was used. The vibrational proton oscillation modes for adsorbed H(5)O(2)(+) computed at 1711 and 1010 cm(-1), in addition to OH stretching and H(2)O scissoring modes, agree with experimental vibrational spectra for proton formation on Pt surfaces in ultrahigh vacuum. Using the H(5)O(2)(+) model, protonation of adsorbed species was found to be facile and consistent with the activation barrier of proton transfer in solution. After protonation, OOH dissociates with an activation barrier of 0.22 eV, similar to the barrier for O(2) dissociation. Comparison of the two pathways suggests that O(2) protonation precedes dissociation in the oxygen reduction reaction. Additionally, an OH diffusion step following O protonation inhibits the reaction, which may lead to accumulation of oxygen on the electrode surface.     

第一性原理研究C在Fe(111)表面和次表面的积炭机理

使用密度泛函方法对C原子在Fe(111)表面吸附团聚和次表层的吸附扩散进行了研究。在炭覆盖度θ_C <1 ML时,C主要以孤立的原子态存在并导致表面重构;1 ML≤θ_C ≤2 ML,"mC₂+nC"为主要的吸附形式;θ_C≥2 ML时,复杂的吸附形态比如碳链和岛状碳团簇开始生成。这些复杂岛状碳团簇是Fe(111)表面石墨沉积或碳纳米管生长的成核中心。在次表层,C原子在八面体位稳定存在。C在表面的迁移能垒为0.45 eV,由表面迁移到次表面的的能垒为0.73 eV。虽然C₂团簇的生成是热力学有利的,但是C向次表层的迁移动力学上占优。     

Mechanisms for H2O decomposition on the Si(111)‐7 × 7 surface: A DFT cluster model study

The mechanisms for the complete decomposition of water molecules on the Si (111)‐7 × 7 surface were investigated theoretically. The reaction pathways for dissociation of four water molecules over the adatom and rest atom sites were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional. The calculated results demonstrated that the initial O? H bond dissociation from the first H₂O to form the adsorbed OH species is more preferential on the adatom site (Si_a) than the rest atom site (Si_r) of Si (111)‐7 × 7. Four water molecules dissociate successively over the adatom site, backbonds of adatoms which are saturated by OH species can reasonably be the place of insertion of oxygen atoms, yielding a tetrahedral SiO₄ structure with one on top and three inserted oxygen atoms. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

甲醛在CeO2(111)表面吸附的密度泛函理论研究

采用基于第一性原理的密度泛函理论和周期平板模型, 研究了甲醛在以桥氧为端面的CeO2(111)稳定表面上的吸附行为. 通过对不同覆盖度, 不同吸附位的甲醛吸附构型、吸附能及电子态密度的分析发现, 甲醛在CeO2(111)表面存在化学吸附与物理吸附两种情况. 化学吸附结构中甲醛的碳、氧原子分别与表面的氧、铈原子发生相互作用, 形成CH2O2物种; 吸附能随着覆盖度的增加而减小. 与自由甲醛分子相比, 物理吸附的甲醛构型变化不大, 其吸附能较小. 利用CNEB(climbing nudged elastic band)方法计算了甲醛在CeO2(111)表面的初步解离反应活化能(约1.71 eV), 远高于甲醛脱附能垒, 这与甲醛在清洁CeO2(111)表面程序升温脱附实验中产物主要为甲醛的结果相一致.     

Density functional theory study of water dissociation in a double water bilayer with or without coadsorption of CO on Pt(111)

Using density functional theory, we investigate the structure of the double water bilayer with or without coadsorption of CO on Pt(111). The double water bilayer consists of two bilayers. Each bilayer is buckled with every second water molecule being closer to the surface than every other water molecule. CO is found to adsorb most strongly when substituting in the first bilayer, the water molecule closest to the surface. Dissociation of H2O in the water bilayer (with or without CO) is further considered. A great number of pathways for the dissociation are studied. These include homolytic pathways where both dissociation products end up adsorbed on the Pt surface and heterolytic pathways where only the OH is adsorbed, while a proton is transferred to the water adlayers. We find that the heterolytic dissociation pathways are energetically more favorable than the homolytic ones, yet they are all rather endothermic. The most favorable pathways found have reaction energies of 0.60 and 0.52 eV without and with CO present. The corresponding activation energies are 0.99 and 0.53 eV, respectively.     

Identification of Hydroxyl on Ni(111)

Hydroxyl (OH) is identified and characterized on the Ni(111) surface by high‐resolution electron energy loss spectroscopy. We find clear evidence of stretching, bending, and translational modes that differ significantly from modes observed for H₂O and O on Ni(111). Hydroxyl may be produced from water by two different methods. Annealing of water co‐adsorbed with atomic oxygen at 85 K to above 170 K leads to the formation of OH with simultaneous desorption of excess water. Pure water layers treated in the same fashion show no dissociation. However, the exposure of pure water to 20 eV electrons at temperatures below 120 K produces OH in the presence of adsorbed H₂O. In combination with temperature‐programmed desorption studies, we show that the OH groups recombine between 180 and 240 K to form O and immediately desorbing H₂O. The lack of influence of co‐adsorbed H₂O at 85 K on the O? H stretching mode indicates that OH does not participate in a hydrogen‐bonding network.     

The reaction pathways for HSCH3 adsorption on Au(111): a density functional theory study

Density functional theory was used to investigate the reaction pathways for HSCH(3) adsorption on Au(111) at low coverage. A molecular adsorbed state was found with the S atom bond on Top sites (E approximately -0.38 eV) and molecular adsorption is nonactivated. The H-SCH(3) dissociation process is energetically less favorable and becomes slightly exothermic only when surface relaxation is considered (DeltaE approximately -0.2 eV). All the reaction pathways present a sizable activation energy barrier, with the lowest being approximately 0.52 eV (0.41 eV taking into account slab relaxation). In the corresponding saddle point of the potential energy surface, the S atom of the methylthiolate molecule is placed on Top sites and the H near a Bridge site. The high barrier obtained explains the complete absence of reactive methanethiol dissociation found in recent experiments.     

First-principle study of adsorption of hydrogen on Ti-doped Mg(0001) surface

Ab initio density functional theory (DFT) calculations are performed to study the adsorption of H2 molecules on a Ti-doped Mg(0001) surface. We find that two hydrogen molecules are able to dissociate on top of the Ti atom with very small activation barriers (0.103 and 0.145 eV for the first and second H2 molecules, respectively). Additionally, a molecular adsorption state of H2 above the Ti atom is observed for the first time and is attributed to the polarization of the H2 molecule by the Ti cation. Our results parallel recent findings for H2 adsorption on Ti-doped carbon nanotubes or fullerenes. They provide new insight into the preliminary stages of hydrogen adsorption onto Ti-incorporated Mg surfaces.     

Adsorption of H2O,OH, and O on CuCl(111) Surface: A Density Functional Theory Study

The adsorption of H2O molecule and its dissociation products, O and OH, on CuCl(111) surface was studied with periodic slab model by PW91 approach of GGA within the framework of density functional theory. The results of geometry optimization indicate that the top site is stable energetically for H2O adsorbed over the CuCl(111) surface. The threefold hollow site is found to be the most stable adsorption site for OH and O, and the calculated adsorption energies are 309.5 and 416.5 kJ/mol, respectively. Adsorption of H2O on oxygen-precovered CuCl(111) surface to form surface hydroxyl groups is predicted to be exothermic by 180.1 kJ/mol. The stretching vibrational frequencies, Mulliken population analysis and density of states analysis are employed to interpret the possible mechanism for the computed results.     

Slab model studies of water adsorption and decomposition on clean and X- (X = C, N and O) contaminated Pd(111) surfaces

To explore the effect of surface contaminants on water chemistry at metallic surfaces, adsorption and decomposition of water monomers on clean and X/Pd(111)(X = C, N and O) surfaces are investigated based on density functional theory calculations. It is revealed that H(2)O binds to Pd(111) surface primarily through the mixing of its 1b(1) with the Pd 4d(z(2)) state. A charge accumulation between the oxygen atom of water and the bound Pd atom is calculated, which is found to be relevant to the H(2)O-Pd interaction. Water adsorption results in a reduction of surface work function and the polarization of the X 2p states. The O-H bond scission of H(2)O on the clean Pd(111) is an energy unfavorable process. In the case of X-assisted O-H bond breaking on X/Pd(111) surfaces, however, the reaction barrier tends to be lower than that on the clean surface and decreases from C/Pd(111) to O/Pd(111). In particular, water decomposition is found to become feasible on O/Pd(111), in agreement with the experimental observations. The calculated barrier is demonstrated to be correlated linearly with the density of X 2p states at the Fermi level. A thorough energy analysis demonstrates that the following geometrical and electronic factors favor the barrier reduction on X/Pd(111) with respect to water decomposition on clean Pd(111): (i) the less deformed structure of water in TS; (ii) the decreased bonding competition between the fragments OH and H. The remarkable decrease of the barrier on O/Pd(111) is revealed to be due to the largest stabilization of the split H atom and the least deformation of water in the TS.