Synthesis and characterization of two new coordination supramolecular structures from a versatile unsymmetric 5-(4-pyridyl)-1,3,4-oxadiazole-2-thione (Hpot) ligand

Two new inorganic–organic coordination networks based on a versatile and unsymmetric building block 5-(4-pyridyl)-1,3,4-oxadiazole-2-thione (Hpot) and inorganic Co^II and Cd^II salts have been synthesized in mixed solvent media and structurally characterized by single-crystal X-ray diffraction analysis. Crystal Hpot (1) was obtained from methanol solution. Reaction of Co(NO₃)₂ · 6H₂O with Hpot afforded a neutral two-dimensional (2-D) porous coordination polymer {[Co(pot)₂] · 6H₂O}_n (2) with a (4,4) network, which shows a 3-D supramolecular network through O–H?O weak interactions. While substituting the transition metal ions used in 2 with Cd(NO₃)₂ · 6H₂O, a neutral 2-D coordination polymer [Cd₂(pot)₄]_n (3) with a (6,3) network which further extended to a 3-D supramolecular structure through versatile hydrogen bonds C–H?X (X = O, N and S) was obtained. It is remarkable that the building block “pot” anion exhibits versatile coordination modes in complexes 2 and 3. These results indicate that the versatile nature of this rigid unsymmetric ligand, together with the coordination preferences of the metal centers, plays a critical role in construction of novel coordination polymers. The properties of gas absorption, magnetism and luminescence of 2 and 3 have been investigated and discussed in detail.     

Synthesis,structures and characterization of two new supramolecular coordination complexes with the ambidentate ligand 5-(4-pyridyl)-1,3,4-oxadiazole-2-thione (Hpot)

Two new coordination supramolecular complexes based on a versatile and unsymmetrical 5-(4-pyridyl)-1,3,4-oxadiazole-2-thione (Hpot) and Mn^II and Ni^II have been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. Reaction of MnCl₂?· 4H₂O with Hpot afforded a neutral mononuclear complex [Mn(pot)₂(H₂O)₄]?·?2H₂O (1), which exhibits a three-dimensional (3-D) supramolecule through versatile intermolecular O–H?···?X (X=O, N and S) hydrogen bond interactions. When using NiCl₂?·?6H₂O instead of MnCl₂?· 4H₂O under similar reaction conditions, a neutral mononuclear complex [Ni(pot)₂(H₂O)₄] (2) is also obtained, which does not exhibit intermolecular hydrogen bonds and π–π stacking interactions. It is very interesting that the pot anion exhibits different coordination modes in complexes 1 and 2. The IR spectra and the TGA for 1 and 2 have been investigated and discussed in detail.     

Synthesis and electrochemical study of 3- and 4-(2-pyridyl)-1,3-benzothiazole complexes with transition metals (CoII, NiII, and CuII). Molecular structure of bis{(4-(2-pyridyl)-1,3-benzothiazole)copper(ii)} tetraacetate

A series of the M(L)Cl₂ · nH₂O and {M(L)}₂(OAc)₄ complexes (M = Ni^II, Co^II, and Cu^II; L is 3- and 4-(2-pyridyl)-1,3-benzothiazole) were synthesized by the reaction of L with MX₂ · nH₂O (X = Cl, OAc) in ethanol. The molecular and crystal structures of the CuL₂(OAc)₄ binuclear complex (L is 4-(2-pyridyl)benzothiazole) were determined by X-ray diffraction analysis. The copper atoms have a distorted tetragonal bipyramidal environment and are coordinated to the nitrogen atom of the pyridine moiety of the ligand and to two oxygen atoms of the bridging acetate ligands. The Cu-Cu distance is 2.6129(9) Å. The electrochemical behavior of the synthesized ligands and complexes was studied using the cyclic voltammetry and rotating disk electrode techniques in DMF solutions (0.1 M Bu₄NClO₄). The primary reduction of all the complexes under study is directed to the metal.     

Structural modulation of Cd(II) supramolecular frameworks with a versatile 2,4-dipyridyl-type building block and different dicarboxylate ligands

A series of Cd(II) coordination complexes with an elongated 2,4-dipyridyl-type building block trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (bpe) and different dicarboxylate ligands have been presented. Generally, bpe shows the unidentate coordination mode and serves as the terminal pendant, whereas the dicarboxylate ligands display various binding fashions to interlink the metal centers to form 1-D comb-like chain, ribbon, and fishbone arrays, as well as 2-D 4⁴ and 4.8² layered networks. Notably, the bpe building block is also involved in secondary interactions such as hydrogen bonding and aromatic stacking to construct the resulting supramolecular architectures. Thermal stability of these complexes has been studied by TG-DTA technique.     

Mixed-ligand metallosupramolecular complexes with Brn-terephthalic acid (n = 1 or 4) and a versatile bent dipyridyl tecton: Structural modulation by substituent effect of the ligand and metal ion

This work presents a series of Zn^II, Cd^II, Co^II, and Pb^II supramolecular complexes assembled from a bent dipyridyl derivative 2,5-bis(3-pyridyl)-1,3,4-oxadiazole (3-bpo) and different dicarboxyl co-ligands 2-bromoterephthalic acid (H₂BTA) and tetrabromoterephthalic acid (H₂TBTA). All products have been prepared under similar conditions and characterized by IR, microanalysis, and TG–DTA techniques. Single-crystal X-ray diffraction indicates that these complexes display mononuclear, 1-D, and 2-D coordination motifs, and diverse higher-dimensional extended networks are further constructed via additional secondary interactions such as H-bonding and aromatic stacking. Notably, in situ hydrolysis reaction of 3-bpo is observed in the Pb^II complex with H₂TBTA, affording another dipyridyl-type ligand N,N′-bis(3-picolinoyl)hydrazine (3-bph). These results evidently reveal the significant substituent effect of terephthalic acid in structural direction of these metallosupramolecular systems that are also regulated by the selection of metal ions.     

cis-Palladium(II) complexes of derivatives of di-(2-pyridyl)methane: Study of the influence of the bridge group in the coordination mode

Palladium(II) complexes containing di-(2-pyridyl)-N-methylimine (1), di-(2-pyridyl)methanol (2) and di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate (4) ligands were synthesized and characterized by ¹H and ¹³C NMR in solution, IR and X-ray single crystal diffraction. Crystal structures of cis-dichloro[di-(2-pyridyl)-N-methylimine]palladium(II) (5), cis-dichloro[di-(2-pyridyl)methanol]palladium(II) (6) and cis-dichloro[di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate]palladium(II) (7) showed a bidentate coordination mode of the di-(2-pyridyl)methane derivatives 1, 2 and 4. In these complexes is observed the formation of a five-membered chelate ring with the iminic ligand 1 and six-membered chelate rings with the pyridinic ligands 2 and 4. In all complexes the palladium atom displays a distorted square planar geometry.     

Three Cu(II) (R)-2-chloromandelato complexes generated from dipyridyl-type ligands with different spacer lengths: syntheses,crystal structures,and ferroelectric properties

Three Cu(II) complexes, Cu₂(bpy)(H₂O)(Clma)₂ (1), Cu₂(bpe)(H₂O)₂(Clma)₂ (2), and Cu(bpp)(Clma) (3), were synthesized (HClma = (R)-2-Chloromandelic acid, bpy?=?4,4′-dipyridine, bpe?=?1,2-di(4-pyridyl)ethylene, bpp?=?1,3-di(4-pyridyl)propane). Complexes 1, 2, and 3 are constructed from 1-D coordination arrays generated from Cu₂(H₂O)(Clma)₂, Cu₂(H₂O)₂(Clma)₂, and Cu₂(Clma)₂ moieties and linked through bpy, bpe, and bpp co-ligands, respectively. 1 and 2 are assembled into 3-D supramolecular networks via O–H?O hydrogen bonds with topology of (6³)(6⁹·8) and (4¹²·6³), respectively, and 3 is assembled into a 3-D architecture through C–H?O hydrogen bonds with topology of (4³·6³)(4³)(4⁴·6⁵·8)(4⁶·6⁶·8³). Compounds 1, 2, and 3 crystallized in acentric space groups P2₁, P1, and P2₁, which exhibit significant ferroelectricity (remnant polarization Pr?=?0.008?μC?cm^?2, coercive field Ec?=?21.4?kV?cm^?1, the spontaneous saturation polarization Ps?=?0.167?μC?cm^?2 for 1, Pr?=?0.183?μC?cm^?2, Ec?=?1.69?kV?cm^?1, and Ps?=?0.021 μC?cm^?2 for 3). Results from infrared and thermal analyses are also discussed.     

4-Alkoxycarbonyl-2-(2-pyridyl)thiazoles and their complexes with CuII and CoII. Molecular and crystal structure of copper 4-ethoxycarbonyl-2-(2-pyridyl)thiazole dichloride

The first synthesis of ethyl 2-(2-pyridyl)thiazole4-carboxylate ( 2) and bis[2-(2-pyridylthiazol-4-ylcarbonyloxy)ethyl] disulfide ( 4) is described. The complexation of compounds 2 and 4 with Cu^II, Co^II, and Ni^II chlorides and perchlorates has been studied. Electrochemical behavior of the ligands and complexes obtained has been investigated by cyclic voltammetry and using rotating disk electrode, which allowed us to confirm the possibility for the ligand 4 and its complexes to be adsorbed on the surface of a gold electrode.     

Synthesis and characterization of N-(2-pyridyl)benzamide-based nickel complexes and their activity for ethylene oligomerization

A series of N-(2-pyridyl)benzamides (1)-(11) and their nickel complexes, [N-(2-pyridyl)benzamide]dinickel(II) di-μ-bromide dibromide (12)-(16) and (aryl)[N-(2-pyridyl)benzamido](triphenylphosphine)nickel(II) (17)-(24), were synthesized and characterized. The single-crystal X-ray analysis revealed that 12 and 14 are binuclear nickel complexes bridged by bromine atoms and each nickel atom adopts a distorted trigonal bipyramidal geometry. The key feature of the complexes 17, 19 and 23 is each has a six-membered nickel chelate ring including a deprotonated secondary nitrogen atom and an O-donor atom. The nickel complexes show moderate to high catalytic activity for ethylene oligomerization with methylaluminoxane (MAO) as cocatalyst. The activity of 12-16/MAO systems is up to 3.3 × 10⁴ g mol⁻¹ h⁻¹ whereas for 17-24/MAO systems it is up to 4.94 × 10⁵ g mol⁻¹ atm⁻¹ h⁻¹. The influence of Al/Ni molar ratio, reaction temperature, reaction period and PPh₃/Ni molar ratio on catalytic activity was investigated.     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.