Volumetric Properties of Aqueous Solutions of L-Glutamic Acid and Magnesium-L-Glutamate

Densities of aqueous solutions of L-glutamic acid and magnesium-L-glutamate were determined from T=288.15 to 333.15 K at 5 K temperature intervals. The measured densities were used to evaluate the apparent molar volumes, V _2,φ (m,T), the cubic expansion coefficients, α(m,T), and the changes of isobaric heat capacities with respect to pressure, (∂ C _p /∂ p) _T,m . They were qualitatively correlated with changes in the structure of water that occur when L-glutamic acid or magnesium-L-glutamate are present.     

Molecularly imprinted adsorbents for preconcentration and isolation of progesterone and testosterone by solid phase extraction combined with HPLC

The use of a novel procedure of solid-phase extraction with molecularly imprinted polymers (MISPE) has been described. A MISPE procedure relying on tailor-made, artificial-mimic materials capable of selectively rebinding target analytes (steroids) based on a combination of recognition mechanisms, such as size, shape and functionality, was custom designed for progesterone and testosterone. The combination of MISPE with LC/DAD is a simple and an efficient method for the determination and quality control of progesterone and testosterone in human urine samples.     

Intramolecular Charge Transfer Reaction in Solutions of Low to High Electrolyte Concentrations: Interplay between Friction and Solvation

Fluorescence emission spectroscopy have been used to investigate the effects of electrolytes on the excited state intramolecular charge transfer (ICT) reaction in 4-(1-azetidinyl)benzonitrile (P4C) in very dilute to concentrated electrolyte solutions of ethyl acetate (EA), acetonitrile (AN) and ethanol (EtOH). In the limit of very low electrolyte concentrations, the reaction rate (=1/τ _rxn, τ _rxn being the reaction time) is found to decrease with increasing electrolyte concentration, the extent of decrease being the maximum in EA and the minimum in AN. At moderate to higher electrolyte concentrations, however, the rate increases upon further addition of electrolyte. The observed non-monotonic electrolyte concentration dependence of rate is believed to occur due to a novel interplay between friction and solvation experienced by the photo-excited reactant in solution. Moreover, the long time decay constant and amplitude of the bi-exponential decay of the time resolved fluorescence emission intensity also show a significant electrolyte concentration dependence which corroborates the relevant steady-state results. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Influence of Europium speciation on its accumulation in Brassica napus and over-expressing BnTR1 lines

This study aimed at influence of europium speciation on its accumulation in Brassica napus (CK) and over-expressing BnTR1 lines (OE), and the kinetics of Eu uptake were investigated. These results indicated that the uptake in the roots of OE was higher than that of CK at high concentrations of europium and even the enrichment in the roots of OE was as high as 20,000 mg/kg at 328.9 μΜ Eu, this suggested that OE might have better resistance to uranium than CK. The time kinetics in plants showed that there had the similar trend between CK and OE. The formation of Eu³⁺at pH 5 in deionized water was beneficial to plants enrichment Eu and carbonate could reduce the adsorption of Eu in two group and phosphate almost completely impress the adsorption of Eu in two group, but citric acid could enhance europium root-to-shoot translocation in two group. These results would help understanding the mechanism of Eu uptake in Brassica napus (CK) and over-expressing BnTR1 lines (OE), therefore properly developing efficient europium/americium phytoremediation.     

Volumetric Study of Aqueous Solutions of Polyethylene Glycol as a Function of the Polymer Molar Mass in the Temperature Range 283.15 to 313.15 K and 0.1 MPa

Density measurements were made for binary aqueous solutions of polyethylene glycol at seven temperatures: 283.15, 288.15, 293.15, 298.15, 303.15, 308.15, and 313.15 K. Polyethylene glycol samples with nominal average molar masses of 3000 g⋅mol⁻¹ (PEG 3000), 6000 g⋅mol⁻¹ (PEG 6000), 10000 g⋅mol⁻¹ (PEG 10000) and 20000 g⋅mol⁻¹ (PEG 20000) were used. These results were used to determine the specific volumes of solutions with solute-to-solvent mass ratios (mass of the solute/mass of the solvent) in the range 0.0546 to 1.4932 for PEG 3000, from 0.0553 to 1.4986 for PEG 6000, from 0.0552 to 1.2241 for PEG 10000, and from 0.0530 to 1.2264 for PEG 20000. The differences between the specific volume of a solution and the specific volume of the pure solvent, at a given temperature, were represented by a virial-type equation in terms of solute concentration. The first-order coefficient of the expansion is the partial specific volume of the solute at infinite dilution. The higher-order coefficients are related to the contribution of pairs, triplets, and higher-order solute aggregates, according to the Constant-Pressure Solution Theory. The functional dependence of the virial coefficients upon temperature is discussed in terms of solute-solute and solute-solvent interactions. The effect of the PEG molar mass on the partial specific volume of solute at infinite dilution, as well as the contributions of pairs of solute molecules to the solution volume, are also investigated. The apparent specific volume, apparent specific expansibility, apparent specific expansibility at infinite dilution and virial coefficients of the apparent specific expansibility are also presented.     

Gas adsorption process in activated carbon over a wide temperature range above the critical point. Part 1: modified Dubinin-Astakhov model

Simulations of the thermal effects during adsorption cycles are valuable tools for the design of efficient adsorption-based systems such as gas storage, gas separation and adsorption-based heat pumps. An analytical representation of the measured adsorption data over the wide operating pressure and temperature swing of the system is necessary for the calculation of complete mass and energy conservation equations. In Part 1, the Dubinin-Astakhov (D-A) model is adapted to model hydrogen, nitrogen, and methane adsorption isotherms on activated carbon at high pressures and supercritical temperatures assuming a constant microporous adsorption volume. The five parameter D-A type adsorption model is shown to fit the experimental data for hydrogen (30 to 293 K, up to 6 MPa), nitrogen (93 to 298 K, up to 6 MPa), and for methane (243 to 333 K, up to 9 MPa). The quality of the fit of the multiple experimental adsorption isotherms is excellent over the large temperature and pressure ranges involved. The model’s parameters could be determined as well from only the 77 K and 298 K hydrogen isotherms without much reducing the quality of the fit.     

Volumetric Properties of Some Aliphatic Mono- and Dicarboxylic Acids in Water at 298.15 K

The apparent molar volumes, V _φ , of two series of homologous aliphatic carboxylic acids, H(CH₂) _n COOH [n=0–5] and (CH₂) _n (COOH)₂ [n=0–5], were determined in dilute aqueous solutions by density measurements at T=298.15 K. Densities were measured using a vibrating-tube densimeter (DMA 5000, Anton Paar, Austria) at T=298.15 K. These results were used to calculate the apparent molar volumes of each solute over the concentration range 0.0050≤m/(mol⋅kg⁻¹)≤0.3000. Values of the apparent molar volumes of undissociated acids V_f(u)⁰V_{\phi (u)}^{0} were also calculated. The variation of V_f(u)⁰V_{\phi (u)}^{0} was determined as a function of the aliphatic chain length of the studied carboxylic acids.     

Temperature Dependence of Physical Properties of Imidazolium Based Ionic Liquids: Internal Pressure and Molar Refraction

Density, speed of sound and refractive index of the imidazolium-based ionic liquids (ILs), 1-methyl-3-octylimidazolium chloride [C₈mim][Cl], 1-butyl-3-methylimidazolium methyl sulfate [C₄mim][C₁OSO₃], and 1-butyl-3-methylimidazolium octyl sulfate [C₄mim][C₈OSO₃], have been measured in the temperature range from 283.15 to 343.15 K. Experimental density and speed of sound have been used to calculate the internal pressure p _i of the ILs. The p _i values were found to be higher than those of water and molecular organic liquids, but lower than those of classical molten salts. We also calculated molar refraction R _M from the measured refractive index n _D in the temperature range from 288.15 to 343.15 K. Refractive indices of ILs were also higher than those of normal organic liquids, but comparable to long-chain hydrocarbon organic solvents. The structure-property correlation of the ILs has been discussed and the results have been compared to our earlier studies (Kumar in J. Solution Chem. 37:203–214, 2008).     

Studies of Partial Molar Volumes of Alkylamines in Non-electrolyte Solvents. IV. Alkyl Amines in Cyclic Ethers at 303.15 K

Apparent molar volumes V _φ,B of n-propylamine, n-butylamine, di-n-propylamine, di-n-butylamine, triethylamine, tri-n-propylamine, and tri-n-butylamine in 1,4-dioxane and in oxolane (tetrahydrofuran) have been determined at 303.15 K using a high-precision Anton Paar vibrating-tube densimeter (model DMA 60/602). The limiting partial molar volumes and limiting excess partial molar volumes are analyzed and interpreted in terms of solute-solvent interactions and structural effects of the molecules. Analyses were made of the contributions of specific interactions to the partial molar volumes of these primary, secondary and tertiary amines in 1,4-dioxane and oxolane using the Terasawa model, scaled particle theory (SPT) and hard-sphere theory (HST). The ERAS model has also been applied to estimate the apparent molar volumes and excess apparent molar volumes of alkylamine solutions in 1,4-dioxane and oxolane.     

Thermal and quality evaluation of vegetable oils used in ruminant feed

Dairies add fat supplements to the diets of small ruminants to increase energy production and consequently the production and quality nutritional and sensorial of the milk. This study investigated the thermal and oxidative stability of babassu, castor, faveleira, and sesame oils by TG/DTA and PDSC. The profile of the fatty oils studied was determined by GC–MS as well as physicochemical characteristics. The thermogravimetric profile of the oils indicated that mass loss was caused by the decomposition or volatility of the triacylglycerides. Faveleira and sesame oils showed a high percentage of polyunsaturated fatty acids, especially C18:2. From a nutritional standpoint, unsaturated oils are more suitable supplements for animals because they promote biochemical changes beneficial to human health.     

Measurement of Magnesium Stability Constants of Biologically Relevant Ligands by Simultaneous Use of pH and Ion-Selective Electrodes

Simultaneous measurements with magnesium ion-selective and pH glass electrodes have been used for determination of the stability constants of magnesium ions with various biologically relevant ligands by alkalimetric titration under physiological conditions (37^○C, I=0.15 mol⋅dm⁻³). New systems were investigated: magnesium with pyroglutamate, pyridoxine and HEPES, along with citrate, lactate, glycinate, aspartate and glutamate. For comparison, calcium stability constants with the same ligands were determined similarly, using calcium ion-selective and pH glass electrodes. Ligand protonation constants, necessary for the calculation of the metal complex formation constants, were also determined.     

Conductance of Dilute Hydrochloric Acid Solutions to 458 K and 1.4 MPa

Electrical conductance measurements were made on dilute solutions of hydrochloric acid to 458 K and 1.4 MPa with a flow instrument. These measurements agree well with those of previous authors. The conductance theory of Fuoss and Hsia as given by Fernandez-Prini (FHFP), was fit to these measurements. It was found that this theory adequately described the present results with a single parameter, the limiting conductance at infinite dilution Λ°(HCl). Within their estimated accuracy, reported literature results of Λ°(HCl) between 264.15 and 579 K and high pressures were found to be represented by a five-parameter equation that was a function of the solvent viscosity, temperature and pressure. This equation along with the FHFP theory permits accurate calculation of the conductance of dilute hydrochloric acid solutions at high temperatures and pressures. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Volumetric Properties of Aqueous Solutions of Tetramethyl-<Emphasis Type="Italic">bis</Emphasis>-urea between 278.15 and 338.15 K at Atmospheric Pressure

Densities of aqueous solutions of tetramethyl-bis-urea (TMbU) with solute mole fractions ranging up to 7.0×10⁻² have been measured with an uncertainty of 1.5×10⁻⁵ g⋅cm⁻³, at 278.15, 298.15, 318.15, and 338.15 K using a vibrating-tube densimeter. The partial molar volumes and expansibilities of TMbU (down to the infinite dilution) and water have been computed. The effects of solute concentration and temperature on the volume packing changes, caused by dissolution (and hydration) of TMbU in an aqueous medium, have been considered.     

Gas adsorption process in activated carbon over a wide temperature range above the critical point. Part 2: conservation of mass and energy

Simulations of the thermal effects during adsorption cycles are a valuable tool for the design of efficient adsorption-based systems such as gas storage, gas separation and adsorption-based heat pumps. In this paper, we present simulations of the thermal phenomena associated with hydrogen, nitrogen and methane adsorption on activated carbon for supercritical temperatures and high pressures. The analytical expressions of adsorption and of the internal energy of the adsorbed phase are calculated from a Dubinin-Astakhov adsorption model using solution thermodynamics. A constant adsorption volume is assumed. The isosteric heat is also calculated and discussed. Finally, the mass and energy rate balance equations for an adsorbate/adsorbent pair are presented and are shown to be in agreement with desorption experiments.     

Ultrasonic Velocities,Densities, and Refractive Indices of Binary Mixtures of Polyethylene Glycol 250 Dimethyl Ether with 1-Propanol and with 1-Butanol

Measurements of the ultrasonic velocity (u), density (ρ) and refractive index (n) for binary mixtures of polyethylene glycol 250 dimethyl ether with 1-propanol and 1-butanol have been made at three temperatures (T=293, 303 and 31 K) over the entire composition range in order to investigate the nature of intermolecular interactions between the components of these liquid mixtures. Various excess thermodynamic properties such as the excess ultrasonic velocity (Δu), deviation in isentropic compressibility (Δk _S ), excess intermolecular free length (L_f^E)(L_{\mathrm{f}}^{\mathrm{E}}), excess acoustic impedance (Z ^E), excess pseudo-Grüneisen parameter (Γ ^E), and molar refraction deviation (ΔR _m) were calculated using experimental values of the ultrasonic velocity, density and refractive index and were then represented with the Redlich-Kister polynomial equation. The observed excess deviation parameter values were explained on the basis of the strength of intermolecular interactions between the components of the mixtures. Estimations of the refractive index and ultrasonic velocity have also been made using various empirical relations and are discussed in terms of the average percentage deviations (APD).     

Stability and Coordination Mode of Complexes of Polyphosphates and Polymetaphosphates with Copper(II) Ions in Aqueous Solution—Potentiometric,Spectral and Theoretical Studies

Complexes of copper(II) with a number of polyphosphate and polymetaphosphate anions have been studied in aqueous solutions by potentiometric, spectroscopic and theoretical methods. Stability constants of the complexes have been determined as well as their coordination modes. Results of the equilibrium studies provided evidence for the formation of ML, MHL and ML(OH) _x type complexes with the ligands studied. The length of the polyphosphate chain was found to affect the oxygen atom charge that is reflected in the stability constants of the ML type complexes. Moreover, the stability of the complex is also influenced by the spatial arrangement of the phosphate groups in phosphates and metaphosphates. The spectral parameters observed for certain complexes have permitted us to deduce the inner coordination sphere of the studied complexes.     

Adsorption properties of BEA zeolites and their aluminum phosphate extrudates for purification of isomaltose

The disaccharide isomaltose is produced via an enzymatic reaction and is adsorbed to BEA zeolite. This reaction integrated adsorption can be achieved as fluidized bed as well as fixed bed. We investigated isotherms, adsorption enthalpies and sorption kinetics of BEA zeolite and extrudates with a novel aluminum phosphate sintermatrix. These extrudates contain 50% (w/w) of BEA 150 zeolites (Si/Al = 75) as primary crystals. BET-surface for extrudates is 245 m²⋅g⁻¹ and 487 m²⋅g⁻¹ for zeolite. Extrudates show a monomodal macropore structure with a maximum at 90 nm. All isotherms show a type I shape. For lower equilibrium concentrations, which occur during the enzymatic reaction, Henry’s law is applied and compared to a Langmuir model. Adsorption equilibrium constant K _i,L calculated from Langmuir for extrudates at 4 °C is 64.7 mL⋅g⁻¹ and more than twice as high as obtained from Henry’s law with K _i is 26.8 mL⋅g⁻¹. Adsorption on extrudates at 4 °C is much stronger than on zeolite crystals where the Henry coefficient K _i is 17.1 mL⋅g⁻¹. Adsorption enthalpy Δh _Ad calculated from van’t Hoff plot with the Henry equation is −44.3 kJ⋅mol⁻¹ for extrudates and −29.6 kJ⋅mol⁻¹ for zeolite crystals. Finally, the kinetics for ad- and desorption were calculated from the initial slope. The diffusion rate for ad- and desorption on extrudates were in the same range while adsorption on zeolites is three orders of magnitudes faster than desorption.     

Spectral and Mechanistic Investigation of the Osmium(VIII) Catalyzed Oxidation of Diclofenac Sodium by the Copper(III) Periodate Complex in Aqueous Alkaline Medium

The kinetics of the osmium(VIII) (Os(VIII)) catalyzed oxidation of diclofenac sodium (DFS) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium has been studied spectrophotometrically at a constant ionic strength of 1.0 mol⋅dm⁻³. The reaction showed first order kinetics in [Os(VIII)] and [DPC] and less than unit order with respect to [DFS] and [alkali]. The rate decreased with increase in [periodate]. The reaction between DFS and DPC in alkaline medium exhibits 1:2 [DFS]:[DPC] stoichiometry. However, the order in [DFS] and [OH⁻] changes from first order to zero order as their concentration increases. Changes in the ionic strength and dielectric constant did not affect the rate of reaction. The oxidation products were identified by LC-ESI-MS, NMR, and IR spectroscopic studies. A possible mechanism is proposed. The reaction constants involved in the different steps of the mechanism were calculated. The catalytic constant (K _C) was also calculated for Os(VIII) catalysis at the studied temperatures. From plots of log ₁₀ K _C versus 1/T, values of activation parameters have been evaluated with respect to the catalytic reaction. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active osmium(VIII) and copper(III) periodate species have been identified.     

A paper-based competitive lateral flow immunoassay for multi β-agonist residues by using a single monoclonal antibody labelled with red fluorescent nanoparticles

An ultrasensitive paper based lateral flow assay is described for rapid and simultaneous fluorometric detection of several β-agonists including clenbuterol and its chemical analogues (mabuterol, brombuterol, cimaterol, cimbuterol, bromchlorbuterol and banbuterol). A nonspecific monoclonal antibody (mAb) against clenbuterol and its analogues was prepared and employed in a competitive immunoassay where mAb conjugated to fluorescent nanoparticles and free β-agonists compete for the binding sites. This enables rapid screening for the 7 β-agonists in a single run that takes about 8 min. Detection limits for the seven β-agonists are <50 pg g^?1 of pork. Recoveries ranged from 69.5% to 102.4%, and relative standard deviations were ±15%. The assay was applied to the analysis of both using spiked and unspiked pork for β-agonists, and the results compare well to those obtained by HPLC-MS.

Open image in new window

Graphical abstract Schematic presentation of an ultra sensitive fluorescent nanoparticle based paper based assay for rapid detection of multi β-agonists in pork tissue.