一个新的锌(II)配位聚合物的合成、结构及其可调节荧光性能

以4,4′-双（1H-咪唑基）联苯，5-苯基间苯二甲酸和Zn(OAc)₂·2H₂O为原料，在水热条件下合成了一个新的Zn(ΙΙ)配合物[Zn(L)(dib)]_n·3nH₂O[（1, H₂L=5-苯基间苯二甲酸，dib=4,4′-双（1H-咪唑基）\]联苯，其结构经IR，元素分析和X-射线单晶衍射表征。     

3,5-吡啶二羧酸镍配位聚合物的合成与晶体结构

采用水热法合成了3个新的3,5-吡啶二羧酸镍配位聚合物[Ni(3,5-Pydc)(H₂O)₄·H₂O]_n(1), [Ni₂(3,5-Pydc)₂(H₂O)₈·(H₂O)₂]_n(2)和[Ni(3,5-Pydc)(H₂O)₂]_n(3), 并通过X射线单晶衍射、FTIR及热重分析对其结构和组成进行了表征. 单晶衍射结果表明, 化合物1和2是一维折线型链状结构, 而化合物3是二维层状结构. 化合物1是由3,5-Pydc配体将中心镍离子连接起来形成的折线型一维链. 在化合物2中存在着两条各自独立的折线型一维链, 但它们的配位方式却完全相同, 每一条链都是由3,5-Pydc配体将镍离子连接而成. 而化合物3则是由3个镍离子和3个3,5-Pydc配体形成的二十元环构成的二维网格. 3个化合物分别通过链间或层间氢键作用(O-H…O)形成三维超分子结构, 化合物1和2中的客体水分子被氢键限域在超分子结构之中.     

新型链状镍配合物的水热合成及其性质

采用水热法合成了一种新型的镍配合物{\[Ni(bipy)(H₂O)₄]·(H₂Dhbs)₂·(H₂O)₄}_n（H₂Dhbs=2,5-二羟基苯磺酸，bipy=4,4′-联吡啶），其结构和性能经FL， IR，元素分析，X-射线单晶衍射和TG表征。结果表明：bipy与镍离子配位，形成链状结构。H₂Dhbs-配体没有参与配位，仅起平衡结构电荷的作用。在结构单元中，\[Ni(bipy)(H₂O)₄]²⁺， H₂Dhbs^-和自由水分子之间通过氢键连接。与配体相比，配合物的荧光发射峰发生了红移，最大发射峰位于464 nm，荧光寿命为2.081 7 ms。     

刚性4-取代双三唑配体构筑的三个锌配合物的合成和荧光

在室温下合成了3个新的配位聚合物{[Zn(4?Nbdc)(btx)]·2H₂O}_n(1·2H₂O)、[Zn(btx)_1.5(1,3?bdac)]n(2)和{[Zn(mbtx)(1,3?bdc)(H₂O)₂]·H₂O}_n(3)(btx=1,4?二(4H?1,2,4?三唑)苯,mbtx=1,3?二(4H?1,2,4?三唑)苯,4?Nbdc=4?硝基邻苯二甲酸根,1,3?bdac=间苯二乙酸根,1,3?bdc=间苯二甲酸根),测试了配合物的单晶结构,并从元素分析、红外和粉末衍射等方面进行表征。单晶X射线衍射表明,配合物1是二维(4,4)网格结构,配合物2和3都是一维链状结构。配合物2中的π?π作用将一维链连接成三维网格结构。在配合物3中,分子间氢键将一维链连接成二维网格,2套二维网格在分子间氢键的作用下相互穿插得到2D+2D→2D的网格结构。同时,还研究了3个配位聚合物的荧光和热稳定性。     

基于三联吡啶-4-羧酸的系列配合物的结构多样性和发光性质（英文）

在溶剂热条件下制备了系列新配合物：[Cr₂(tpc)₂(HCOO)₂(OH)₂]·4H₂O (1)、[Ba(tpc)₂(H₂O)₂]_n (2)、[Zn₂(tpc)₂(NO₃)₂]_n (3)、[Pb(Htpc)(NO₃)₂]·2H₂O (4)和[Rh(Htpc)Cl₃]·CH₃OH·H₂O (5)(Htpc=2,2′∶6,2″-三联吡啶-4-羧酸)。X射线单晶衍射分析表明,有机配体呈4种不同的配位方式;配合物1～5通过C—H…O/N氢键和π…π相互作用形成了新颖的超分子网络。研究了这些配合物的发光性能。在365 nm紫外辐射下,晶体2～5分别呈现绿色、蓝色...     

基于柔性四羧酸的三个一维/二维/三维Zn(Ⅱ)/Co(Ⅱ)配合物的晶体结构及荧光性质

通过水热/溶剂热合成的方法制备了3个Zn(Ⅱ)/Co(Ⅱ)配合物{[Zn(H₂L)(H₂O)₃]·H₂O·0.5H₄L}_n(1)、{[Co(L)_0.5(4,4'-bpy)]·0.5H₂O}_n(2)和{[Co(L)_0.5(pbmb)(H₂O)]·H₂O}_n(3)(H₄L=5,5'-(hexane-1,6-diyl)-bis(oxy)diisophthalic acid,4,4'-bpy=4,4'-bipyridine,pbmb=1,1'-(1,3-propane)bis-(2-methylbenzimidazole))。结构分析表明配合物1为一维链结构。2为拓扑符号为(6⁴·7·8)(6·7²)的三重穿插网络结构。3是拓扑符号为(4·6²)(4²·6²·8²)的(3,4)-连接的二维网络结构。配合物1呈现出较好的荧光性质。     

多苯并咪唑锰( Ⅱ )配合物的合成及对DNA凝聚的促进作用

以多苯并咪唑配体1,1,4,7,7-五(2-苯并咪唑甲基)-二乙基三胺(DTPB)为主配体, 合成了锰(Ⅱ)配合物[Mn(DTPB)Ac]Ac·8H₂O(1)和[Mn₂(DTPB)(NO₃)₂(H₂O)₂][Mn₂(DTPB)(NO₃)₂(H₂O)(CH₃OH)]·(NO₃)₄·5CH₃OH·H₂O(2), 并对其进行了表征. 利用紫外-可见吸收光谱和黏度实验研究了配合物1和2与DNA的相互作用, 发现这2个配合物均能与DNA结合, 并对配合物与DNA作用的机理进行了探讨. 利用琼脂糖凝胶电泳和直角光散射(RALS)技术研究了配合物1和2促进DNA凝聚的性质. 结果表明, 在近中性条件下2个配合物都能促使DNA凝聚. 利用透射电子显微镜(TEM)观察了不同凝聚体的形态.     

基于V型双咪唑与二羧酸混合配体Zn2+配位聚合物的合成、结构与性质

通过溶剂热合法,制备了两种新的Zn²⁺配位聚合物{[Zn(bib)(bdc)]•DMF}_n(1)和{[Zn(bib)(bpdc)]•H₂O}_n(2)(bib=1,3-双(1-咪唑)苯,H₂bdc=1,4-苯二甲酸,H₂bpdc=4,4'-联苯二甲酸,DMF=N,N-二甲基甲酰胺）。通过单晶X-射线衍射确定了两个配合物的结构：配合物1属于三斜晶系,空间群为P-1,是一种由bib和ndc^2-配体混合连接二维网络结构,配合物2属于单斜晶系,空间群为P2₁/n,表现出了二重互穿二维网络结构。      

一系列萘羧酸膦酸镧系配合物的合成、结构和荧光性质

在溶剂热条件下,5-羧酸-1-萘膦酸(5-pncH₃)和稀土硝酸盐反应合成得到3例萘羧酸膦酸镧系配合物：[Pr(5-pnc)(H₂O)]·2H₂O (1)、[Sm(5-pnc)(H₂O)]·H₂O (2)和[Eu(5-pnc)(H₂O)]·H₂O (3)。采用单晶X射线衍射、粉末X射线衍射、元素分析、红外光谱、热重分析和荧光光谱对配合物进行了表征。晶体结构表明,每个七配位的镧系离子由来自5个膦酸盐配体的6个O原子和来自1个配位水分子的一个O原子配位。[LnO₇]通过O—C—O、O—P—O或—O—单元连接成一维双金属链结构,一维双金属链再进一步由萘羧酸膦酸配体(5-pnc^3-)连接成三维开放骨架结构。荧光性质研究表明,配合物3在330 nm的激发光下,发射Eu的红色特征荧光,而配合物1和2在蓝光区显示出非常宽的配体中心发射带。     

一例新型三重穿插锌(Ⅱ)配位聚合物的合成及热稳定性能

在水热条件下，以1,4-二咪唑丁烷（1,4-BIB）、对苯二甲酸（H₂TPA）和Zn(NO₃)₂·6H₂O为原料,合成了一例新型的配位聚合物[Zn(1,4-BIB)_0.5(TPA)]_n(CCDC: 983546),其结构和性能经IR,元素分析,XRD和TGA表征。结果表明：[Zn(1,4-BIB)_0.5(TPA)]_n具有三重穿插三维多孔骨架结构，热稳定性较好。     

氢键构筑的新颖微孔配位聚合物[Co2(Hisor)2·(4,4′-bpy)2(H2O)2]·4,4′-bpy的合成与结构

A novel microporous coordination polymer [Co2(Hisor)2(4,4′-bpy)2(H2O)2]·4,4′-bpy was synthesized by hydrothermal reaction and characterized by single crystal X-ray diffraction, elemental analysis and IR spectrum. The crystal belongs to the monoclinic system and space group is P2/n with a=1.040 6(3) nm, b=1.138 8(4) nm, c=1.854 7(6) nm, β=102.991(6)°, V= 2.141 6(12) nm3, Z=2, Dc=1.443 Mg/m3, Mr=930.62, μ=0.842 mm-1, F(000)=952, GOF= 1.072, R=0.065 4, wR=0.146 8[I>2σ(I)]. There are two crystallographically independent Co(Ⅱ) ions in the title complex. The Hisor2- and 4,4′-bpy link the metal ions into 2D grids with dimension of 0.522 3 nm×1.138 8 nm. There are O—H…O and N—H…O hydrogen bonds in the complex resulting in the formation of 3D network with 1D channels, in which are free 4,4′-bpy molecules.     

由5-磺基水杨酸组装的镧系金属有机骨架配合物的合成及结构

在水热条件下,合成了6个新的镧系金属配位聚合物,Ln₂(SSA)₂(phen)₄(H₂O)₂(Ln=Er(Ⅲ) (1),Yb(Ⅲ) (2)),[La₂(SSA)₂(phen)₂(H₂O)₄·(phen)·(H₂O)_{1.33相似文献}   

Diversity of crystal structure with different lanthanide ions involving in situ oxidation-hydrolysis reaction

A series of lanthanide and lanthanide-transition metal compounds with isonicotinic acid (Hina) and oxalate ligands have been synthesized under hydrothermal reactions. X-Ray crystal structure analyses reveal that they have a rich structural chemistry. Three distinct structure types were exhibited with decreasing lanthanide radii: [LnCu(ina)(2)(C(2)O(4))].H(2)O (Ln=La 1, Pr 2, Nd 3) for type I, [Ln(ina)(C(2)O(4))(H(2)O)(2)] (Ln=Sm 4, Eu 5, Gd 6) for type II, and [Ln(ina)(C(2)O(4))(0.5)(OH)] (Ln=Tb 7, Dy 8, Er 9) for type III. The structure of type I has a 3d-4f heterometallic structure and consists of 1D channels along the b axis, which filled with guest water molecules. They exhibit a first 3D uninodal eight-connected framework with a unique 3(6).4(18).5(3).6 topology. Type II has 2D Ln-ina-C(2)O(4) 4(4)-nets, the nitrogen donors of the ina ligand are not coordinated to any of the metal ions, inducing the lower dimensional networks. Type III consists of 2D Ln-C(2)O(4) layers pillared by ina ligands to form a pillared-layer framework. The structure evolution is due to the versatile coordination modes of ina and oxalate ligands as well as the lanthanide contraction effect. Notably, the oxalate ligand was in situ synthesized from orotic acid through an oxidation-hydrolysis reaction. The type III materials show high thermal stability; luminescence properties of Nd 3, Sm 4, Eu 5, Tb 7 are also investigated.     

Synthesis and coordination chemistry of phosphine oxide decorated dibenzofuran platforms

A four-step synthesis for 4,6-bis(diphenylphosphinoylmethyl)dibenzofuran (4) from dibenzofuran and a two-step synthesis for 4,6-bis(diphenylphosphinoyl)dibenzofuran (5) are reported along with coordination chemistry of 4 with In(III), La(III), Pr(III), Nd(III), Er(III), and Pu(IV) and of 5 with Er(III). Crystal structure determinations for the ligands, 4·CH(3)OH and 5, the 1:1 complexes [In(4)(NO(3))(3)], [Pr(4)(NO(3))(3)(CH(3)CN)]·0.5CH(3)CN, [Er(4)(NO(3))(3)(CH(3)CN)]·CH(3)CN, [Pu(4)Cl(4)]·THF and the 2:1 complex [Nd(4)(2)(NO(3))(2)](2)(NO(3))(2)·(H(2)O)·4(CH(3)OH) are described. In these complexes, ligand 4 coordinates in a bidentate POP'O' mode via the two phosphine oxide O-atoms. The dibenzofuran ring O-atom points toward the central metal cations, but in every case it is more than 4 ? from the metal. A similar bidentate POP'O' chelate structure is formed between 5 and Er(III) in the complex, {[Er(5)(2)(NO(3))(2)](NO(3))·4(CH(3)OH)}(0.5), although the nonbonded Er···O(furan) distance is reduced to ～3.6 ?. The observed bidentate chelation modes for 4 and 5 are consistent with results from molecular mechanics computations. The solvent extraction performance of 4 and 5 in 1,2-dichloroethane for Eu(III) and Am(III) in nitric acid solutions is described and compared against the extraction behavior of n-octyl(phenyl)-N,N-diisobutylcarbamoylmethyl phosphine oxide (OΦDiBCMPO) measured under identical conditions.     

Synthesis, structure, and characterization of three series of 3d-4f metal-organic frameworks based on rod-shaped and (6,3)-sheet metal carboxylate substructures

Three series of porous lanthanide metal-organic coordination polymers, namely [Cu(bpy)Ln(3)(ip)(5)(Hip)(H(2)O)] [Ln = Er (1a), Y (1b), Eu (1c); bpy = 2,2'-bipyridine, H(2)ip=isophthalic acid], [Cu(3)(bpy)(2)Ln(2)(ip)(6)(H(2)O)(5)] [Ln = Yb (2a), Gd (2b), Tb (2c)], and [Cu(3)Ln(2)(ip)(6)] [Ln = Eu (3a), Gd (3b)] have been synthesized hydrothermally by the reaction of the combination of 3d-4f metal centers and N-/O-donor ligands. X-ray diffraction analyses reveal that polymers 1a-c and 2a-c, as well as 3a, b are isomorphous in structure. Polymers 1a-c consist of 3D alpha-Po networks based on a inorganic rod-shaped secondary building units (SBUs) of {Er(6)Cu(2)(bipy)(2)(O(2)C)(11)} which are 27.03 A in length. Polymers 2a-c also contain 3D alpha-Po networks, constructed from shorter (14.79 A) but similarly rod-shaped SBUs of {Yb(2)Cu(3)(bpy)(2)(O(2)C)(12)}. The structure also contains hydrogen-bonded (H(2)O)(6) chains which can be reversibly dehydrated/rehydrated. Polymers 3a, b contain metal carboxylate substructures which have 2D (6,3) topologies; these layers are bridged by the ip(2-) ligands to give an overall 3D network which contains two sorts of cavities. This series of Ln-Cu coordination polymers are further characterized by antiferromagnetic behavior.     

Short-range correlations in d-f cyanido-bridged assemblies with XY and XY-Heisenberg anisotropy

Two new d-f cyanido-bridged 1D assemblies [RE(pzam)(3)(H(2)O)Mo(CN)(8)]·H(2)O (RE = Sm(III), Er(III)) were synthesized and their magneto-structural properties have been studied by field-dependent magnetization and specific heat measurements at low temperatures (≥0.3 K). Below ≈ 10 K the ground state of both the Sm(III) and Er(III) ions is found to be a Kramers doublet with effective spin S = 1/2. From analyses of the low-temperature magnetic specific heat and magnetization the exchange coupling between these RE(III) effective spins and the Mo(v) spins S = 1/2 along the structural chains has been determined. It is found to be antiferromagnetic, with J(∥)/k(B) = -2.6 K and Ising-Heisenberg symmetry of the interaction (J(∥)/J(⊥) = 0.3) for RE = Sm(III), whereas the compound with RE = Er(III) behaves as a pure XY chain, with J(⊥)/k(B) = -1.0 K. For the compound [Sm(pzam)(3)(H(2)O)Mo(CN)(8)]·H(2)O a small λ-type anomaly in the specific heat is observed at about 0.6 K, which is ascribed to a transition to long-range magnetic ordering induced by weak interchain interactions of dipolar origin. No evidence for 3D interchain magnetic ordering is found in the Er(III) analogue.     

Porous lanthanide-organic frameworks: synthesis,characterization, and unprecedented gas adsorption properties

The reactions of Ln(NO(3))(3) (Ln = La, Er) with 1,4-phenylendiacetic acid (H(2)PDA) under hydrothermal conditions produce isostructural lanthanide coordination polymers with the empirical formula [Ln(2)(PDA)(3)(H(2)O)] x 2H(2)O. The extended structure of [Ln(2)(PDA)(3)(H(2)O)] x 2H(2)O consists of Ln-COO triple helices cross-linked through the [bond]CH(2)C(6)H(4)CH(2)[bond] spacers of the PDA anions, showing 1D open channels along the crystallographic c axis that accommodate the guest and coordinated water molecules. Evacuation of [Er(2)(PDA)(3)(H(2)O)] x 2H(2)O at room temperature and at 200 degrees C, respectively, generates [Er(2)(PDA)(3)(H(2)O)] and [Er(2)(PDA)(3)], both of which give powder X-ray diffraction patterns consistent with that of [Er(2)(PDA)(3)(H(2)O)] x 2H(2)O. The porosity of [Er(2)(PDA)(3)(H(2)O)] and [Er(2)(PDA)(3)] is further demonstrated by their ability to adsorb water vapor to form [Er(2)(PDA)(3)(H(2)O)] x 2H(2)O quantitatively. Thermogravimetric analyses show that [Er(2)(PDA)(3)] remains stable up to 450 degrees C. The effective pore window size in [Er(2)(PDA)(3)] is estimated at 3.4 A. Gas adsorption measurements indicate that [Er(2)(PDA)(3)] adsorbs CO(2) into its pores and shows nonporous behavior toward Ar or N(2). There is a general correlation between the pore size and the kinetic diameters of the adsorbates (CO(2) = 3.3 A, Ar = 3.40 A, and N(2) = 3.64 A). That the adsorption favors CO(2) over Ar is unprecedented and may arise from the combined differentiations on size and on host-guest interactions.     

Syntheses and crystal structures of dinuclear complexes containing d-block and f-block luminophores. Sensitization of NIR luminescence from Yb(III), Nd(III), and Er(III) centers by energy transfer from Re(I)- and Pt(II)-bipyrimidine metal centers

Mononuclear complexes [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] (bpym = 2,2'-bipyrimidine), in which one of the bipyrimidine sites is vacant, have been used as "complex ligands" to prepare heterodinuclear d-f complexes in which a lanthanide tris(1,3-diketonate) unit is attached to the secondary bipyrimidine site to evaluate the ability of d-block chromophores to act as antennae for causing sensitized near-infrared (NIR) luminescence from adjacent lanthanide(III) centers. The two sets of complexes so prepared are [Re(CO)(3)Cl(mu-bpym)Ln(fod)(3)] (abbreviated as Re-Ln; where Ln = Yb, Nd, Er) and [(F(3)C-C(6)H(4)-CC)(2)Pt(mu-bpym)Ln(hfac)(3)] (abbreviated as Pt-Ln; where Ln = Nd, Gd). Members of both series have been structurally characterized; the metal-metal separation across the bipyrimidine bridge is approximately 6.3 A in each case. In these complexes, the (3)MLCT (MLCT = metal to ligand charge-transfer) luminescences of the mononuclear [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] complexes are quenched by energy transfer to those lanthanides (Ln = Yb, Nd, Er) that have low-lying f-f states capable of NIR luminescence; as a result, sensitized NIR luminescence is seen from the lanthanide center following excitation of the d-block unit. In the solid state, quenching of the luminescence from the d-block chromophore is complete, indicating efficient d --> f energy transfer, as a result of the short metal-metal separation across the bipyrimidine bridge. In a CH(2)Cl(2) solution, partial dissociation of the dinuclear complexes into the mononuclear units occurs, with the result that some (3)MLCT luminescence is observed from mononuclear [Re(bpym)(CO)(3)Cl] or [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] present in the equilibrium mixture. Solution UV-vis and luminescence titrations, carried out by the addition of portions of Ln(fod)(3)(H(2)O)(2) or Ln(hfac)(3)(H(2)O)(2) to the d-block complex ligands, indicate that binding of the lanthanide tris(1,3-diketonate) unit at the secondary bipyrimidine site to give the d-f dinuclear complexes occurs with an association constant of ca. 10(5) M(-)(1).     

5-异烟酰胺基异酞酸与含氮配体构筑的两个铜配合物：水热合成、晶体结构和磁性质研究

由水热法合成了2个铜配合物[Cu(INAIP)(bbi)]·5H₂O (1)和[Cu(INAIP)(phen)(H₂O)]·H₂O (2)(H₂INAIP=5-异烟酰胺基异酞酸,bbi=1,4-二咪唑基丁烷,phen=1,10-邻菲咯啉),并用元素分析、IR及X-射线单晶衍射等对其进行了表征。晶体结构分析结果表明：配合物1和2都属于单斜晶系,C2/c空间群。配合物1是由1,4-二咪唑基丁烷连接[Cu(INAIP)]一维链形成的二维双层结构,而配合物2是通过π-π堆积作用将[Cu(INAIP)]一维无限链延伸为二维结构,这2个化合物最终均被氢键拓展成三维超分子结构。在1.8~300 K温度范围内测试了配合物1和2的变温磁化率,结果表明配合物1中由羧基桥联的双核铜之间存在弱的反铁磁相互作用,而配合物2表现为顺磁性。