1-Azathioxanthone Appended Lanthanide(III) DO3A Complexes That Luminesce Following Excitation at 405 nm**

Since the pioneering report by Selvin, we have been fascinated by the potential of using lanthanide luminescence in bioimaging. The uniquely narrow emission lines and long luminescence lifetimes both provide the potential for background free images together with full certainty of probe localization. General use of lanthanide based bioimaging was first challenged by low brightness, and later by the need of UV (<405 nm) excitation sources not present in commercial microscopes. Here, we designed three lanthanide-based imaging probes based on a known motif to investigate the limitations of 405 nm excitation. These were synthesized, characterized, investigated on dedicated as well as commercial microscopes, and the photophysics was explored in detail. It was proven without doubt that the lanthanide complexes enter the cells and luminesce internally. Even so, no lanthanide luminescence were recovered on the commercial microscopes. Thus, we returned to the photophysical properties that afforded the conclusion that – despite the advances in light sources and photodetectors – we need new designs that can give us brighter lanthanide complexes before bioimaging with lanthanide luminescence becomes something that is readily done.     

Efficient Formation of Luminescent Lanthanide(III) Complexes by Solid‐Phase Synthesis and On‐Resin Screening

Time‐resolved luminescence measurements of luminescent lanthanide complexes have advantages in biological assays and high‐throughput screening, owing to their high sensitivity. In spite of the recent advances in their energy‐transfer mechanism and molecular‐orbital‐based computational molecular design, it is still difficult to estimate the quantum yields of new luminescent lanthanide complexes. Herein, solid‐phase libraries of luminescent lanthanide complexes were prepared through amide‐condensation and Pd‐catalyzed coupling reactions and their luminescent properties were screened with a microplate reader. Good correlation was observed between the time‐resolved luminescence intensities of the solid‐phase libraries and those of the corresponding complexes that were synthesized by using liquid‐phase chemistry. This method enabled the rapid and efficient development of new sensitizers for Sm^III, Eu^III, and Tb^III luminescence. Thus, solid‐phase combinatorial synthesis combined with on‐resin screening led to the discovery of a wide variety of luminescent sensitizers.     

Detection strategies for bioassays based on luminescent lanthanide complexes and signal amplification

Two attractive detection strategies for bioassays are reviewed in this article. Both approaches use the highly sensitive time-resolved luminescence detection of lanthanide complexes in combination with a signal amplification scheme. While enzyme-amplified lanthanide luminescence (EALL) has been an established technique for more than a decade, nanoparticles doped with luminescent lanthanide complexes have been introduced very recently. In this paper, the basic properties and major applications of both techniques are presented, and their future perspectives are discussed critically.     

1,3-Diketone Calix[4]arene Derivatives—A New Type of Versatile Ligands for Metal Complexes and Nanoparticles

The present review is aimed at highlighting outlooks for cyclophanic 1,3-diketones as a new type of versatile ligands and building blocks of the nanomaterial for sensing and bioimaging. Thus, the main synthetic routes for achieving the structural diversity of cyclophanic 1,3-diketones are discussed. The structural diversity is demonstrated by variation of both cyclophanic backbones (calix[4]arene, calix[4]resorcinarene and thiacalix[4]arene) and embedding of different substituents onto lower or upper macrocyclic rims. The structural features of the cyclophanic 1,3-diketones are correlated with their ability to form lanthanide complexes exhibiting both lanthanide-centered luminescence and magnetic relaxivity parameters convenient for contrast effect in magnetic resonance imaging (MRI). The revealed structure–property relationships and the applicability of facile one-pot transformation of the complexes to hydrophilic nanoparticles demonstrates the advantages of 1,3-diketone calix[4]arene ligands and their complexes in developing of nanomaterials for sensing and bioimaging.     

Development of responsive lanthanide-based magnetic resonance imaging and luminescent probes for biological applications

Lanthanide complexes have unique chemical characteristics compared with typical organic complexes, and have recently attracted much interest because of the expanding need for new bioanalytical sensors. For example, magnetic resonance imaging (MRI) permits noninvasive three-dimensional imaging inside opaque organisms, and gadolinium ion (Gd(3+)) complexes have become important tools as MRI contrast agents. However, most of them are nonspecific, and report solely on anatomy. Therefore, responsive MRI contrast agents, so-called "smart" MRI contrast agents whose ability to relax water protons is greatly enhanced by recognition of a particular biomolecule, have great potential for elucidating biological phenomena. On the other hand, lanthanide complexes such as europium (Eu(3+)) and terbium (Tb(3+)) complexes have excellent luminescence properties for biological applications, i.e., long luminescence lifetime of the order of milliseconds and a large Stoke's shift of >200 nm. Their long-lived luminescence is especially suitable for time-resolved measurements, because the interference from short-lived background fluorescence and scattered light rapidly decays to a negligible level after a pulse of excitation light is applied, and the emitted light can be collected after an appropriate delay time. These luminescent lanthanide complexes have already found commercial use as highly sensitive luminescent probes in heterogeneous and homogeneous assays. This paper reviews our research on the design and synthesis of responsive lanthanide-based MRI and luminescent probes for advanced bioimaging.     

Photophysical Properties of Lanthanide (Eu3+, Tb3+) Hybrid Soft Gels of Double Functional Linker of Ionic Liquid–Modified Silane

Four kinds of luminescent hybrid soft gels have been assembled by introducing the lanthanide (Eu³⁺, Tb³⁺) tetrakis β‐diketonate into the covalently bonded imidazolium‐based silica through electrostatic interactions. Here, the imidazolium‐based silica matrices are prepared from imidazolium‐derived organotriethoxysilanes by the sol–gel process, in which the imidazolium cations are strongly anchored within the silica matrices while anions can still be exchanged following application for functionalization of lanthanide complexes. The photoluminescence measurements indicated that these hybrid soft gels exhibit characteristic red and green luminescence originating from the corresponding ternary lanthanide ions (Eu³⁺, Tb³⁺). Further investigation of photophysical properties reveals that these soft gels have inherited the outstanding luminescent properties from the lanthanide tetrakis β‐diketonate complexes such as strong luminescence intensities, long lifetimes and high luminescence quantum efficiencies.     

Thermal and Emission Properties of a Series of Lanthanides Complexes with N-Biphenyl-Alkylated-4-Pyridone Ligands: Crystal Structure of a Terbium Complex with N-Benzyl-4-Pyridone

This work focuses on the investigation of the liquid crystalline behavior and luminescence properties of the lanthanide complexes of Eu(III), Sm(III) and Tb(III) with N-biphenyl-alkylated-4-pyridone ligands. The organic ligands having a biphenyl group attached via a long flexible spacer with either 9 or 10 carbon atoms were synthesized by the reaction between 4-hydroxypyridine and the corresponding bromide compounds. The chemical structures of the organic and lanthanide complexes were assigned based on elemental analysis, single-crystal X-ray diffraction, ¹H, ¹³C NMR and IR spectroscopies, and thermogravimetric analysis (TGA). The X-ray diffraction analysis of a parent compound shows that the lanthanide ions are surrounded by three monodentate pyridone ligands and three bidentate nitrate ions, giving a 9-coordinate environment. The mesogenic behavior and the type of liquid crystalline phases exhibited by the new complexes were analyzed by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM), and powder X-ray diffraction (XRD) studies. Only the lanthanide complexes with longer spacer (10) display a monotropic SmA phase, typically on a short thermal range (less than 10 °C). The complexes with shorter flexible chains (9) show no liquid crystalline properties with melting temperatures lower than their analogs with longer spacers. The emission spectra recorded in solid state at room temperatures show typical emission bands for each lanthanide ion employed (Eu(III), Tb(III) and Sm(III)).     

Luminescent nanoparticles prepared by encapsulating lanthanide chelates to silica sphere

The luminescent nanoparticles were prepared by encapsulating the [LnL₄]^? (Ln = Eu, Tb; L = BTFA, HFAA, TTFA, TFAA) complexes anion into the silicon framework. We firstly synthesized a series of novel siloxy-bearing lanthanide complex precursor, and then encapsulated them into the silica sphere by a modified Stöber process. As a result, four europium and two terbium tetrakis β-diketonate complexes functionalized silica sphere nanoparticles were obtained and characterized in detail using Fourier transform infrared spectra, X-ray diffraction, scanning electronic microscope, thermogravimetric analysis, luminescence excitation and emission spectroscopy, luminescence lifetime measurements, and diffuse reflectance UV–Vis spectroscopy. The result shows that these luminescent nanoparticles maintain the distinctive luminescence character of lanthanide chelate including broad excitation spectra, line-like emission spectra, high quantum efficiency, and long luminescent lifetime, which makes them great potential application in the synthesis of luminescent nanoparticle.     

Photoluminescence of lanthanide aromatic carboxylates

Energy transfer processes affecting the luminescence properties and methods of controlling them by a change in the compositions and structures of luminescent compounds are analyzed in the review on example of lanthanide aromatic carboxylates. The analysis demonstrates clearly how the understanding of the physical regularities of the processes leading to luminescence makes it possible to perform the purposeful design of organic ligands and their brightly luminescing complexes with lanthanides.     

Luminescence Resonance Energy Transfer Sensors Based on the Assemblies of Oppositely Charged Lanthanide/Gold Nanoparticles in Aqueous Solution

This work demonstrates luminescence resonance energy transfer (LRET) sensors based on lanthanide‐doped nanoparticles as donors (D) and gold nanoparticles as acceptors (A), combined through electrostatic interactions between the oppositely charged nanoparticles. Negatively charged lanthanide‐doped nanoparticles, YVO₄:Eu and LaPO₄:Ce,Tb, with high luminescence quantum yield and good water‐solubility, are synthesized through a polymer‐assisted hydrothermal method. Positively charged polyhedral and spherical gold nanoparticles exhibit surface plasmon resonance (SPR) bands centered at 623 and 535 nm, respectively. These bands overlap well with the emission of the Eu³⁺ and Tb³⁺ ions within the lanthanide nanoparticles. Herein, the gold nanoparticles are synthesized through a seed‐mediated cetyltrimethylammonium bromide (CTAB)‐assisted method. The assemblies of the oppositely charged donors and acceptors are developed into LRET‐based sensors exhibiting a donor quenching efficiency close to 100 %.     

Remarkable luminescence properties of lanthanide complexes with asymmetric dodecahedron structures

The distorted coordination structures and luminescence properties of novel lanthanide complexes with oxo‐linked bidentate phosphane oxide ligands—4,5‐bis(diphenylphosphoryl)‐9,9‐dimethylxanthene (xantpo), 4,5‐bis(di‐tert‐butylphosphoryl)‐9,9‐dimethylxanthene (tBu‐xantpo), and bis[(2‐diphenylphosphoryl)phenyl] ether (dpepo)—and low‐vibrational frequency hexafluoroacetylacetonato (hfa) ligands are reported. The lanthanide complexes exhibit characteristic square antiprism and trigonal dodecahedron structures with eight‐coordinated oxygen atoms. The luminescence properties of these complexes are characterized by their emission quantum yields, emission lifetimes, and their radiative and nonradiative rate constants. Lanthanide complexes with dodecahedron structures offer markedly high emission quantum yields (Eu: 55–72 %, Sm: 2.4–5.0 % in [D₆]acetone) due to enhancement of the electric dipole transition and suppression of vibrational relaxation. These remarkable luminescence properties are elucidated in terms of their distorted coordination structures.     

稀土配合物杂化发光材料的组装及光物理性质研究进展

稀土配合物兼具无机物稳定性好以及有机物荧光量子效率高的优点,而且具有可设计性,制备简便,容易修饰,荧光性质优异（发射谱带窄、色纯度高、荧光寿命长、量子产率高以及发射光谱范围覆盖可见和近红外光区等）．但配合物的光、热、化学稳定性和机械加工性能相对较差,因而限制了其在很多领域中的实际应用．近年来的研究表明,将稀土配合物引入到各种基质材料中可以改善其稳定性及机械加工性能,并对其光物理性质产生调制作用．根据基质材料的不同,杂化材料可分为无机基质、无机／有机复合基质及有机基质杂化材料．本文综述了这些不同基质稀土配合物杂化发光材料的研究进展,探讨了主客体间相互作用对杂化材料光物理性质及稳定性的影响,为实现稀土配合物杂化发光材料在光学器件领域（LED照明、光纤维、光学放大器及激光等）及生命分析领域的应用提供了重要的理论依据．     

Ytterbium(III) Porpholactones: β‐Lactonization of Porphyrin Ligands Enhances Sensitization Efficiency of Lanthanide Near‐Infrared Luminescence

The near‐infrared (NIR) luminescence efficiency of lanthanide complexes is largely dependent on the electronic and photophysical properties of antenna ligands. Although porphyrin ligands are efficient sensitizers of lanthanide NIR luminescence, non‐pyrrolic porphyrin analogues, which have unusual symmetry and electronic states, have been much less studied. In this work, we used porpholactones, a class of β‐pyrrolic‐modified porphyrins, as ligands and investigated the photophysical properties of lanthanide porpholactones Yb‐1 a – 5 a . Compared with Yb porphyrin complexes, the porpholactone complexes displayed remarkable enhancement of NIR emission (50–120 %). Estimating the triplet‐state levels of porphyrin and porpholactone in Gd complexes revealed that β‐lactonization of porphyrinic ligands lowers the ligand T₁ state and results in a narrow energy gap between this state and the lowest excited state of Yb³⁺. Transient absorption spectra showed that Yb^III porpholactone has a longer transient decay lifetime at the Soret band than the porphyrin analogue (30.8 versus 17.0 μs). Thus, the narrower energy gap and longer lifetime arising from β‐lactonization are assumed to enhance NIR emission of Yb porpholactones. To demonstrate the potential applications of Yb porpholactone, a water‐soluble Yb bioprobe was constructed by conjugating glucose to Yb ‐ 1 a . Interestingly, the NIR emission of this Yb porpholactone could be specifically switched on in the presence of glucose oxidase and then switched off by addition of glucose. This is the first demonstration that non‐pyrrolic porphyrin ligands enhance the sensitization efficiency of lanthanide luminescence and also display switchable NIR emission in the region of biological analytes (800–1400 nm).     

Water-induced luminescence improvement in a lanthanide β-diketone complex for monitoring water purity

Water-caused luminescence quenching is a well-known and intractable issue for luminescence lanthanide complexes, greatly confining their broad application as sensing and displaying devices in water system.Herein, an anionic and coordination-saturated lanthanide complex with a nanosheet-like structure has been prepared. It exhibits excellent photophysical properties both in solid state and in aqueous suspension. Noteworthily, a 13% improvement for sensitization efficiency from organic ligand to c...     

New Luminescent Lanthanide Tetrakis-Complexes NEt4[LnL4] Based on Dimethyl-N-Benzoylamidophosphate

New lanthanide dimethyl-N-benzoylamidophosphate (HL) based tetrakis-complexes NEt₄[LnL₄] (Ln³⁺=La, Nd, Sm, Eu, Gd, Tb, Dy) are reported. The complexes are characterized by means of NMR, IR, absorption, and luminescent spectroscopy as well as by elemental, X-Ray, and thermal gravimetric analyses. The phenyl groups of the four ligands of the complex anion are directed towards one side, while the methoxy groups are directed in the opposite side, which makes the complexes under consideration structurally similar to calixarenes. The effect of changing the alkali metal counterion to the organic cation NEt₄⁺ on the structure and properties of the tetrakis-complex [LnL4]^- is analyzed. The complexes exhibit bright characteristic for respective lanthanides luminescence. Rather high intensity of the band of ⁵D₀→⁷F₄ transition, observed in the luminescence spectrum of NEt₄[EuL₄], is discussed based on theoretical calculations.     

Controlling electron trap depth to enhance optical properties of persistent luminescence nanoparticles for in vivo imaging

Focusing on the use of nanophosphors for in vivo imaging and diagnosis applications, we used thermally stimulated luminescence (TSL) measurements to study the influence of trivalent lanthanide Ln(3+) (Ln = Dy, Pr, Ce, Nd) electron traps on the optical properties of Mn(2+)-doped diopside-based persistent luminescence nanoparticles. This work reveals that Pr(3+) is the most suitable Ln(3+) electron trap in the diopside lattice, providing optimal trap depth for room temperature afterglow and resulting in the most intense luminescence decay curve after X-ray irradiation. This luminescence dependency toward the electron trap is maintained through additional doping with Eu(2+), allowing UV-light excitation, critical for bioimaging applications in living animals. We finally identify a novel composition (CaMgSi(2)O(6):Eu(2+),Mn(2+),Pr(3+)) for in vivo imaging, displaying a strong near-infrared afterglow centered on 685 nm, and present evidence that intravenous injection of such persistent luminescence nanoparticles in mice allows not only improved but highly sensitive detection through living tissues.     

Strong emitting sol–gel materials based on interaction of luminescence dyes and lanthanide complexes with silver nanoparticles

We show here how luminescence of fluorescent dyes and lanthanide complexes in sol–gel matrix can be intensified as a result of interaction of the species with silver nanoparticles. Preparation of silver nanoparticles in sol–gel composite precursor is outlined and their structural characterization are presented. Zirconia-glymo and Glymo-polyurethane-silica were used as host matrices for silver nanoparticles and the fluorescence species. The intensification of fluorescence was demonstrated by steady state spectroscopy.     

Luminescence studies on europium-strontium phthalate system

New lanthanide luminescence materials were prepared. The main component lanthanide chelates generally need a relatively high content of rare earth. Inorganic luminescence materials only need low rare earth concentration using doped method. Similarly, lanthanide chelates can be added to complex matrix by doped method. In this way, low rare earth concentration emission was successful in the lanthanide chelates system as well. The influence of europium ion concentration on luminescence intensities was discussed. When the europium ion weight in the complex is only about 0.6%, the sample exhibits good luminescence properties. The fluorescence, Fourier transform infrared spectra, micro-Raman and electron spin resonance spectra of the samples were measured. And a possible luminescence mechanism was suggested by the inorganic doped mechanism and the luminescence of lanthanide complexes together.     

Europium(III) and terbium(III) chelates of quinolonecarboxylic acid derivatives as labels for immunofluorimetric assay

Luminescence properties of Tb(III) and Eu(III) complexes of quinolonecarboxylic acid derivatives were studied. Optimal conditions of luminescence were determined, and the influence of surfactants and diethylenetriaminepentaacetic acid on the luminescence properties of the complexes was studied. It was demonstrated that species-specific immunoglobulins labeled with terbium ions can be determined with the detection limit of the lanthanide label 5 x 10^-14 M.     

Cooperative Sensitization Upconversion in Solution Dispersions of Co-Crystal Assemblies of Mononuclear Yb3+ and Eu3+ Complexes

Lanthanide upconversion luminescence in nanoparticles has prompted continuous breakthroughs in information storage, temperature sensing, and biomedical applications, among others. Achieving upconversion luminescence at the molecular scale is still a critical challenge in modern chemistry. In this work, we explored the upconversion luminescence of solution dispersions of co-crystals composed of discrete mononuclear Yb(DBM)₃Bpy and Eu(DBM)₃Bpy complexes (DBM: dibenzoylmethane, Bpy: 2,2′-bipyridine). The 613 nm emission of Eu³⁺ was observed under excitation of Yb³⁺ at 980 nm. From the series of molecular assemblies studied, the most intense luminescence was obtained for a 1 : 1 molar ratio of Yb³⁺ : Eu³⁺, resulting in a high quantum yield of 0.67 % at 2.1 W cm⁻². The structure and energy transfer mechanism of the assemblies were fully characterized. This is the first example of an Eu³⁺-based upconverting system composed of two discrete mononuclear lanthanide complexes present as co-crystals in non-deuterated solution.