Real‐Time Detection of Traces of Benzaldehyde in Benzyl Alcohol as a Solvent by a Flexible Lanthanide Microporous Metal–Organic Framework

Luminescent 3D lanthanide metal–organic framework (Ln‐MOF) {[Tb₂(TATAB)₂] ? 4 H₂O ? 6 DMF}_n ( 1 ) was synthesized under solvothermal conditions by using flexible ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB). A phase transition was observed between low temperature and room temperature. The luminescence of 1 could be enhanced by formaldehyde and quenched efficiently by trace amounts of benzaldehyde in solvents such as benzyl alcohol (0.01–2.0 vol %) and ethanol (0.01–2.5 vol %). This is the first use of a Ln‐MOF as chemical sensor for both formaldehyde and benzaldehyde. The high sensitivity and selectivity of the luminescence response of 1 to benzaldehyde allows it to be used as an excellent sensor for identifying benzaldehyde and provides a simple and convenient method for detecting traces of benzaldehyde in benzyl alcohol based injections. This work establishes a new strategy for detection of benzaldehyde in benzyl alcohol by luminescent MOFs.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

The Series of Rare Earth Complexes [Ln2Cl6(μ‐4,4′‐bipy)(py)6], Ln=Y,Pr, Nd,Sm‐Yb: A Molecular Model System for Luminescence Properties in MOFs Based on LnCl3 and 4,4′‐Bipyridine

A series of 12 dinuclear complexes [Ln₂Cl₆(μ‐4,4′‐bipy)(py)₆], Ln=Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, ( 1 – 12 , respectively) was synthesized by an anhydrous solvothermal reaction in pyridine. The complexes contain a 4,4′‐bipyridine bridge and exhibit a coordination sphere closely related to luminescent lanthanide MOFs based on LnCl₃ and 4,4‐bipyridine. The dinuclear complexes therefore function as a molecular model system to provide a better understanding of the luminescence mechanisms in the Ln‐N‐MOFs ${\hbox{}{{\hfill 2\atop \hfill \infty }}}$ [Ln₂Cl₆(4,4′‐bipy)₃] ? 2(4,4′‐bipy). Accordingly, the luminescence properties of the complexes with Ln=Y, Sm, Eu, Gd, Tb, Dy, ( 1 , 4 – 8 ) were determined, showing an antenna effect through a ligand–metal energy transfer. The highest efficiency of luminescence is observed for the terbium‐based compound 7 displaying a high quantum yield (QY of 86 %). Excitation with UV light reveals typical emission colors of lanthanide‐dependent intra 4f–4f‐transition emissions in the visible range (Tb^III: green, Eu^III: red, Sm^III: salmon red, Dy^III: yellow). For the Gd^III‐ and Y^III‐containing compounds 6 and 1 , blue emission based on triplet phosphorescence is observed. Furthermore, ligand‐to‐metal charge‐transfer (LMCT) states, based on the interaction of Cl^? with Eu^III, were observed for the Eu^III compound 5 including energy‐transfer processes to the Eu^III ion. Altogether, the model complexes give further insights into the luminescence of the related MOFs, for example, rationalization of Ln‐independent quantum yields in the related MOFs.     

A Modulator‐Induced Defect‐Formation Strategy to Hierarchically Porous Metal–Organic Frameworks with High Stability

The pore size enlargement and structural stability have been recognized as two crucial targets, which are rarely achieved together, in the development of metal–organic frameworks (MOFs). Herein, we have developed a versatile modulator‐induced defect‐formation strategy, in the presence of monocarboxylic acid as a modulator and an insufficient amount of organic ligand, successfully realizing the controllable synthesis of hierarchically porous MOFs (HP‐MOFs) with high stability and tailorable pore characters. Remarkably, the integration of high stability and large mesoporous property enables these HP‐MOFs to be important porous platforms for applications involving large molecules, especially in catalysis.     

Photo‐ and Electronically Switchable Spin‐Crossover Iron(II) Metal–Organic Frameworks Based on a Tetrathiafulvalene Ligand

A major challenge is the development of multifunctional metal–organic frameworks (MOFs), wherein magnetic and electronic functionality can be controlled simultaneously. Herein, we rationally construct two 3D MOFs by introducing the redox active ligand tetra(4‐pyridyl)tetrathiafulvalene (TTF(py)₄) and spin‐crossover Fe^II centers. The materials exhibit redox activity, in addition to thermally and photo‐induced spin crossover (SCO). A crystal‐to‐crystal transformation induced by I₂ doping has also been observed and the resulting intercalated structure determined. The conductivity could be significantly enhanced (up to 3 orders of magnitude) by modulating the electronic state of the framework via oxidative doping; SCO behavior was also modified and the photo‐magnetic behavior was switched off. This work provides a new strategy to tune the spin state and conductivity of framework materials through guest‐induced redox‐state switching.     

Pressure-responsive curvature change of a "rigid" geodesic ligand in a (3,24)-connected mesoporous metal-organic framework

A (3,24)-connected mesoporous metal-organic framework, PCN-69, was synthesized by linking a hexatopic ligand btti with dicopper paddlewheel clusters. This material has rigid connectivity but a flexible framework, which has been attributed to a curvature change of the ligand.     

Template‐Induced Diverse Metal–Organic Materials as Catalysts for the Tandem Acylation–Nazarov Cyclization

In our continuing quest to develop a metal–organic framework (MOF)‐catalyzed tandem pyrrole acylation–Nazarov cyclization reaction with α,β‐unsaturated carboxylic acids for the synthesis of cyclopentenone[b]pyrroles, which are key intermediates in the synthesis of natural product (±)‐roseophilin, a series of template‐induced Zn‐based ( 1–3 ) metal‐organic frameworks (MOFs) have been solvothermally synthesized and characterized. Structural conversions from non‐porous MOF 1 to porous MOF 2 , and back to non‐porous MOF 3 arising from the different concentrations of template guest have been observed. The anion–π interactions between the template guests and ligands could affect the configuration of ligands and further tailor the frameworks of 1–3 . Futhermore, MOFs 1–3 have shown to be effective heterogeneous catalysts for the tandem acylation–Nazarov cyclization reaction. In particular, the unique structural features of 2 , including accessible catalytic sites and suitable channel size and shape, endow 2 with all of the desired features for the MOF‐catalyzed tandem acylation–Nazarov cyclization reaction, including heterogeneous catalyst, high catalytic activity, robustness, and excellent selectivity. A plausible mechanism for the catalytic reaction has been proposed and the structure–reactivity relationship has been further clarified. Making use of 2 as a heterogeneous catalyst for the reaction could greatly increase the yield of total synthesis of (±)‐roseophilin.     

Crystalline Capsules: Metal–Organic Frameworks Locked by Size‐Matching Ligand Bolts

Metal–organic frameworks (MOFs) are shown to be good examples of a new class of crystalline porous materials for guest encapsulation. Since the encapsulation/release of guest molecules in MOF hosts is a reversible process in nature, how to prevent the leaching of guests from the open pores with minimal and nondestructive modifications of the structure is a critical issue. To address this issue, we herein propose a novel strategy of encapsulating guests by introducing size‐matching organic ligands as bolts to lock the pores of the MOFs through deliberately anchoring onto the open metal sites in the pores. Our proposed strategy provides a mechanical way to prevent the leaching of guests and thereby has less dependence on the specific chemical environment of the hosts, thus making it applicable for a wide variety of existing MOFs once the size‐matching ligands are employed.     

ESR study of molecular orientation and dynamics of TEMPO derivatives in CLPOT 1D nanochannels

The molecular orientations and dynamics of 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl (TEMPO) radical derivatives with large substituent groups at the 4‐position (4‐X‐TEMPO) in the organic one‐dimensional nanochannels within the nanosized molecular template 2,4,6‐tris(4‐chlorophenoxy)‐1,3,5‐triazine (CLPOT) were examined using ESR. The concentrations of guest radicals, including 4‐methoxy‐TEMPO (MeO‐TEMPO) or 4‐oxo‐TEMPO (TEMPONE), in the CLPOT nanochannels in each inclusion compound (IC) were reduced by co‐including 4‐substituted‐2,2,6,6‐tetramethylpiperidine (4‐R‐TEMP) compounds at a ratio of 1 : 30–1 : 600. At higher temperatures, the guest radicals in each IC underwent anisotropic rotational diffusion in the CLPOT nanochannels. The rotational diffusion activation energy, E_a, associated with MeO‐TEMPO or TEMPONE in the CLPOT nanochannels (6–7 kJ mol^?1), was independent of the size and type of substituent group and was similar to the E_a values obtained for TEMPO and 4‐ hydroxy‐TEMPO (TEMPOL) in our previous study. However, in the case in which TEMP was used as a guest compound for dilution (spacer), the tilt of the rotational axis to the principal axis system of the g ‐tensor, and the rotational diffusion correlation time, τ_R, of each guest radical in the CLPOT nanochannels were different from the case with other 4‐R‐TEMP. These results indicate the possibility of controlling molecular orientation and dynamics of guest radicals in CLPOT ICs through the appropriate choice of spacer. Copyright © 2016 John Wiley & Sons, Ltd.     

Embedding Functional Biomacromolecules within Peptide‐Directed Metal–Organic Framework (MOF) Nanoarchitectures Enables Activity Enhancement

Rationally tailoring a robust artificial coating can enhance the life‐time of fragile biomacromolecules. However, the coating also can restrain the activity of the guest because of the decreased substrate accessibility. Herein, we report a peptide‐directed strategy that enables in situ tailoring of the MOF‐shrouded biohybrids into controllable nanoarchitectures. The MOF biohybrid can be shaped from different 3D microporous architectures into a 2D mesoporous layer by a peptide modulator. Using this mild strategy, we show that the nanoarchitectures of the MOF coatings significantly affect the biological functions of the contained biomacromolecules. The biomacromolecules entrapped within the novel 2D mesoporous spindle‐shaped MOFs (2D MSMOFs) have significantly increased bioactivity compared to when encased within the hitherto explored 3D microporous MOFs. The improvement results from the shortened diffusion path and enlarged pore channel in 2D MSMOFs. Meanwhile, the thin 2D MSMOF layer also can provide excellent protection of the hosted biomacromolecules or protein‐scaffolded biominerals through structural confinement.     

Formation of a Syndiotactic Organic Polymer Inside a MOF by a [2+2] Photo‐Polymerization Reaction

Getting suitable crystals for single‐crystal X‐ray crystallographic analysis still remains an art. Obtaining single crystals of metal–organic frameworks (MOFs) containing organic polymers poses even greater challenges. Here we demonstrate the formation of a syndiotactic organic polymer ligand inside a MOF by quantitative [2+2] photopolymerization reaction in a single‐crystal‐to‐single‐crystal manner. The spacer ligands with trans,trans,trans‐conformation in the pillared‐layer MOF with guest water molecules in the channels, undergo pedal motion to trans,cis,trans‐conformation prior to [2+2] photo‐cycloaddition reaction and yield single crystals of MOF containing two‐dimensional coordination polymers fused with the organic polymer ligands. We also show that the organic polymer in the single crystals can be depolymerized reversibly by cleaving the cyclobutane rings upon heating. These MOFs also show interesting photoluminescent properties and sensing of small organic molecules.     

Chiral Recognition and Separation by Chirality‐Enriched Metal–Organic Frameworks

Endowed with chiral channels and pores, chiral metal–organic frameworks (MOFs) are highly useful; however, their synthesis remains a challenge given that most chiral building blocks are expensive. Although MOFs with induced chirality have been reported to avoid this shortcoming, no study providing evidence for the ee value of such MOFs has yet been reported. We herein describe the first study on the efficiency of chiral induction in MOFs using inexpensive achiral building blocks and fully recoverable chiral dopants to control the handedness of racemic MOFs. This method yielded chirality‐enriched MOFs with accessible pores. The ability of the materials to form host–guest complexes was probed with enantiomers of varying size and coordination and in solvents with varying polarity. Furthermore, mixed‐matrix membranes (MMMs) composed of chirality‐enriched MOF particles dispersed in a polymer matrix demonstrated a new route for chiral separation.     

Triazine‐Cored Lanthanide‐Based Metal–Organic Frameworks Featuring Unique Water Chains and Strong Characteristic Emissions

A new triazine‐cored tricarboxylic acid, N,N′,N“‐1,3,5‐triazine‐2,4,6‐triyltris(cis‐4‐aminocyclohexane‐carboxylic acid) (H₃L), has been prepared by replacing the chlorine atoms of cyanuric chloride with cis‐4‐aminocyclohexane‐carboxylic acid, which has been used for the construction of a series of triazine‐cored lanthanide‐based metal–organic frameworks (MOFs). All these MOFs were structurally authenticated, revealing that they are isostructural and exist as two‐dimensional (2D) coordination networks with the general formula [Ln(L)(H₂O)₂]?5.5 H₂O (Ln= 1?Gd , 2?Tb , 3?Eu ). A unique one‐dimensional water chain, composed of primary tetrameric cyclic rings and dodecameric cyclic rings, has been found entrapped in the lattice. Moreover, all these compounds display bright characteristic photoluminescence. Particularly, for 1 , apart from the strong blue emission peak (Φ_f=20.6 %) corresponding to the intraligand transition under near‐UV excitation, the characteristic emissions of Gd³⁺ cation (Φ_f=5.0 %) were unexpectedly observed upon excitation at 273 nm.     

Complexation between Methyl Viologen (Paraquat) Bis(Hexafluorophosphate) and Dibenzo[24]Crown‐8 Revisited

Paraquat bis(hexafluorophosphate) undergoes stepwise dissociation in acetone. All three species—the neutral molecule, and the mono‐ and dications—are represented significantly under the experimental conditions typically used in host–guest binding studies. Paraquat forms at least four host–guest complexes with dibenzo[24]crown‐8. They are characterized by both 1:1 and 1:2 stoichiometries, and an overall charge of either zero (neutral molecule) or one (monocation). The monocationic 1:1 host–guest complex is the most abundant species under typical (0.5–20 mM ) experimental conditions. The presence of the dicationic 1:1 host–guest complex cannot be excluded on the basis of our experimental data, but neither is it unambiguously confirmed to be present. The two confirmed forms of paraquat that do undergo complexation—the neutral molecule and the monocation—exhibit approximately identical binding affinities toward dibenzo[24]crown‐8. Thus, the relative abundance of neutral, singly, and doubly charged pseudorotaxanes is identical to the relative abundance of neutral, singly, and doubly charged paraquat unbound with respect to the crown ether in acetone. In the specific case of paraquat/dibenzo[24]crown‐8, ion‐pairing does not contribute to host–guest complex formation, as has been suggested previously in the literature.     

Chirality-controlled and solvent-templated catenation isomerism in metal-organic frameworks

A family of highly porous homochiral, racemic, and meso metal-organic frameworks (MOFs) were synthesized based on a new elongated tetra-carboxylate ligand and the copper paddle-wheel building units. These MOFs exhibited remarkable catenation isomerism that is controlled by both chirality of the bridging ligand and the size of solvent molecules. The ability to manipulate framework interpenetration is key to future synthesis of mesoporous homochiral MOFs which hold great promise in heterogeneous asymmetric catalysis and chiral separations.     

Fabrication of Microporous Metal–Organic Frameworks in Uninterrupted Mesoporous Tunnels: Hierarchical Structure for Efficient Trypsin Immobilization and Stabilization

Hierarchically porous metal–organic frameworks (HP‐MOFs) are promising in various applications. Most reported HP‐MOFs are prepared based on the generation of mesopores in microporous frameworks, and the formed mesopores are connected by microporous channels, limiting the accessibility of mesopores for bulky molecules. A hierarchical structure is formed by constructing microporous MOFs in uninterrupted mesoporous tunnels. Using the confined space in as‐prepared mesoporous silica, highly dispersed metal precursors for MOFs are coated on the internal surface of mesoporous tunnels. Ligand vapor‐induced crystallization is employed to enable quantitative formation of MOFs in situ, in which sublimated ligands diffuse into mesoporous tunnels and react with metal precursors. The obtained hierarchically porous composites exhibit record‐high adsorption capacity for the bulky molecule trypsin. The thermal and storage stability of trypsin is improved upon immobilization on the composites.     

Host–Guest Interactions of Phosphorescent Molecular Tweezers Based on an Alkynylplatinum(II) Terpyridine System with Polyaromatic Hydrocarbons

Host–guest interactions of a molecular tweezer complex 1 with various planar organic molecules including polyaromatic hydrocarbons (PAHs) were investigated by 1D and 2D ¹H NMR spectroscopy, UV/Vis absorption and emission titration studies. 2D and DOSY NMR spectroscopies support the sandwiched binding mode based on 1:1 host–guest interactions. The binding constants (K_S) of complex 1 for various PAHs were determined by NMR titration studies and the values were found to span up to an order of 10⁴ M ^?1 for coronene to no observable interaction for benzene, indicating that the π‐surface area is important for such host–guest interactions. The substituent effect on the host–guest interaction based on the guest series of 9‐substituted anthracenes was also studied. In general, a stronger interaction was observed for the anthracene guest with electron‐donating groups, although steric and π‐conjugation factors cannot be completely excluded. The photophysical responses of complex 1 upon addition of various PAHs were measured by UV/Vis and emission titration studies. The UV/Vis absorption spectra were found to show a drop in absorbance of the metal‐to‐ligand charge‐transfer (MLCT) and ligand‐to‐ligand charge‐transfer (LLCT) admixture band upon addition of various guest molecules to 1 , whereas the emission behavior was found to change differently depending on the guest molecules, showing emission enhancement and/or quenching. It was found that emission quenching occurred either via energy transfer or electron transfer pathway or both, while emission enhancement was caused by the increase in rigidity of complex 1 as a result of host–guest interaction.     

Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

Lanthanide Organic Framework Luminescent Thermometers

Metal–organic frameworks (MOFs) are excellent platforms for engineering luminescence properties as their building blocks, metal ions, linkers, and guest ions or molecules, are all potential sources of light emission. Temperature is one of the most important physical properties affecting the dynamics and viability of natural and engineered systems. Because the luminescence of certain lanthanide‐bearing MOFs changes considerably with temperature, in the last few years, these materials have been explored as optical thermometers, especially in temperature sensing based on the intensity ratios of two separate electronic transitions. This review discusses the main concepts and ideas assisting the design of such ratiometric thermometers, and identifies the main challenges presented to this nascent field: develop nanothermometers for bio‐applications and nanomedicine; understand the energy transfer mechanisms determining the thermal sensitivity; achieve effective primary thermometers; realize multifunctional nanothermometers; integrate Ln³⁺‐based thermometers in commercial products.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.