Highly Regioselective Palladium‐Catalyzed Carboxylation of Allylic Alcohols with CO2

Various allylic alcohols were carboxylated in the presence of a catalytic amount of PdCl₂ and PPh₃ using ZnEt₂ as a stoichiometric transmetalation agent under a CO₂ atmosphere (1 atm). This carboxylation proceeded in a highly regioselective manner to afford branched carboxylic acids predominantly. The β,γ‐unsaturated carboxylic acid thus obtained was successfully converted into an optically active γ‐butyrolactone, a known intermediate of (R)‐baclofen.     

Allylation Reactions of Aldehydes with Allylboronates in Aqueous Media: Unique Reactivity and Selectivity that are Only Observed in the Presence of Water

Zn(OH)₂‐catalyzed allylation reactions of aldehydes with allylboronates in aqueous media have been developed. In contrast to conventional allylboration reactions of aldehydes in organic solvents, the α‐addition products were obtained exclusively. A catalytic cycle in which the allylzinc species was generated through a B‐to‐Zn exchange process is proposed and kinetic studies were performed. The key intermediate, an allylzinc species, was detected by HRMS (ESI) analysis and by online continuous MS (ESI) analysis. This analysis revealed that, in aqueous media, the allylzinc species competitively reacted with the aldehydes and water. An investigation of the reactivity and selectivity of the allylzinc species by using several typical allylboronates ( 6a , 6b , 6c , 6d ) clarified several important roles of water in this allylation reaction. The allylation reactions of aldehydes with allylboronic acid 2,2‐dimethyl‐1,3‐propanediol esters proceeded smoothly in the presence of catalytic amounts of Zn(OH)₂ and achiral ligand 4d in aqueous media to afford the corresponding syn‐adducts in high yields with high diastereoselectivities. In all cases, the α‐addition products were obtained and a wide substrate scope was tolerated. Furthermore, this reaction was applied to asymmetric catalysis by using chiral ligand 9 . Based on the X‐ray structure of the Zn‐ 9 complex, several nonsymmetrical chiral ligands were also found to be effective. This reaction was further applied to catalytic asymmetric alkylallylation, chloroallylation, and alkoxyallylation processes and the synthetic utility of these reactions has been demonstrated.     

Copolymerization of carbon dioxide and propylene oxide under inorganic oxide supported rare earth ternary catalyst

Recently, rare earth ternary coordination catalyst represented as Y(CCl₃OO)₃‐Glycerin‐ZnEt₂ has been used for producing poly(propylene carbonate) (PPC, an alternating copolymer of carbon dioxide and propylene oxide) in industry scale, but its catalytic activity needs further improvement. One reason for the relatively low catalytic activity lied in that only 11.7% of active center was efficient due to possible embedding of active center in the heterogeneous catalyst. In this report, supporting strategy was developed, where Y(CCl₃OO)₃‐Glycerin‐ZnEt₂ was supported on various inorganic oxides. Two supporting methods were carried out. One way was to mix Y(CCl₃OO)₃‐Glycerin with inorganic oxide first and then ZnEt₂ was dropped to form the supported catalyst, and the other was to make Y(CCl₃OO)₃‐Glycerin‐ZnEt₂ at first and then mixing with inorganic oxides. The former showed decreasing catalytic activity compared with corresponding unsupported rare earth ternary catalyst, while an improvement of 16–36% in catalytic activity was realized in the latter. PPC with an average number molecular weight (M_n) of over 100 kg/mol and carbonate unit (CU) content of higher than 96% was prepared by both supported catalysts. The catalytic activity of the supported catalyst depended significantly on the supports, which increased in the following order: α‐Al₂O₃ < MgO < ZnO ≈ SiO₂ <γ‐Al₂O₃. γ‐Al₂O₃ was the best support for rare earth ternary catalyst, which showed a remarkable 36% increase in catalytic activity, corresponding to the utilization of 17% of active center. Although MgO supported catalyst gave only an 8% increase in catalytic activity, the M_n and CU content of PPC were raised to about 143 kg/mol and 99%, whereas the PPC from common rare earth ternary catalyst was about 108 kg/mol and 97%, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rhodium-Catalyzed Addition of Organoboronic Acids to Aldehydes

Highly inert to ionic additions to aldehydes , aryl- and 1-alkenylboronic acids succumb to a catalytic variant mediated by a [Rh(acac)(CO)₂]–diphosphane complex in aqueous phase at 80–95°C to yield secondary alcohols [Eq. (a)]. A key step in the catalytic cycle is the transmetalation between the boron reagent and the rhodium complex. L_n=diphosphane (e.g. 1,1′-bis(diphenylphosphanyl)ferrocene); R=aryl, 1-alkenyl; R′=alkyl, aryl; acac=acetylacetonate.     

Enantioselective Synthesis of Allylboronates and Allylic Alcohols by Copper‐Catalyzed 1,6‐Boration

Chiral secondary allylboronates are obtained in high enantioselectivities and 1,6:1,4 ratios by the copper‐catalyzed 1,6‐boration of electron‐deficient dienes with bis(pinacolato)diboron (B₂(pin)₂). The reactions proceed efficiently using catalyst loadings as low as 0.0049 mol %. The allylboronates may be oxidized to the allylic alcohols, and can be used in stereoselective aldehyde allylborations. This process was applied to a concise synthesis of atorvastatin, in which the key 1,6‐boration was performed using only a 0.02 mol % catalyst loading.     

Rhodium-catalyzed addition of arylstannanes to carbon-heteroatom double bond

The addition of arylstannanes to the carbon-heteroatom double bond in the presence of a catalytic amount of a cationic rhodium complex ([Rh(cod)(MeCN)₂]BF₄) was examined. The reactions of aldehydes, α-dicarbonyl compounds, and N-substituted aldimines with the arylstannanes gave corresponding alcohols, α-hydroxy carbonyl compounds, and amines, respectively. An arylrhodium complex generated by the transmetalation with the arylstannane was probably the active catalytic species.     

Theoretical Study on the Mechanism of Ni‐Catalyzed Alkyl–Alkyl Suzuki Cross‐Coupling

Ni‐catalyzed cross‐coupling of unactivated secondary alkyl halides with alkylboranes provides an efficient way to construct alkyl–alkyl bonds. The mechanism of this reaction with the Ni/ L1 ( L1 =trans‐N,N′‐dimethyl‐1,2‐cyclohexanediamine) system was examined for the first time by using theoretical calculations. The feasible mechanism was found to involve a Ni^I–Ni^III catalytic cycle with three main steps: transmetalation of [Ni^I( L1 )X] (X=Cl, Br) with 9‐borabicyclo[3.3.1]nonane (9‐BBN)R₁ to produce [Ni^I( L1 )(R₁)], oxidative addition of R₂X with [Ni^I( L1 )(R₁)] to produce [Ni^III( L1 )(R₁)(R₂)X] through a radical pathway, and C? C reductive elimination to generate the product and [Ni^I( L1 )X]. The transmetalation step is rate‐determining for both primary and secondary alkyl bromides. KOiBu decreases the activation barrier of the transmetalation step by forming a potassium alkyl boronate salt with alkyl borane. Tertiary alkyl halides are not reactive because the activation barrier of reductive elimination is too high (+34.7 kcal mol^?1). On the other hand, the cross‐coupling of alkyl chlorides can be catalyzed by Ni/ L2 ( L2 =trans‐N,N′‐dimethyl‐1,2‐diphenylethane‐1,2‐diamine) because the activation barrier of transmetalation with L2 is lower than that with L1 . Importantly, the Ni⁰–Ni^II catalytic cycle is not favored in the present systems because reductive elimination from both singlet and triplet [Ni^II( L1 )(R₁)(R₂)] is very difficult.     

Nickel‐Catalyzed Allylmethylation of Alkynes with Allylic Alcohols and AlMe3: Facile Access to Skipped Dienes and Trienes

We present herein an unprecedented allylative dicarbofunctionalization of alkynes with allylic alcohols. This simple catalytic procedure utilizes commercially available Ni(COD)₂, triphenylphosphine, and inexpensive reagents, and delivers valuable skipped dienes and trienes with an all‐carbon tetrasubstituted alkene unit in a highly stereoselective fashion. Preliminary mechanistic studies support the reaction pathway of allylnickelation followed by transmetalation in this dicarbofunctionalization of alkynes.     

Directly Diphenylborane‐Fused Porphyrins

Mono‐ and bis(diphenylborane)‐fused porphyrins were synthesized from the corresponding β‐(2‐trimethylsilylphenyl)‐substituted porphyrins through the sequence of Si–B exchange reaction, intramolecular bora‐Friedel–Crafts reaction, and ring‐closing Si–B exchange reaction. Effective electronic interactions of the empty p‐orbital of the boron atom with the porphyrin π‐circuit lead to red‐shifted absorption spectra and substantially decreased LUMO energy levels. Pyridine adds at the boron center to cause disruption of the electronic interaction of the boron atom with large association constants (1.9–17×10⁴ m ^?1) depending on the central metal at the porphyrin. The Zn^II complex behaved as a hetero‐dinuclear Lewis acid, exhibiting regioselective binding of pyridines at the boron or the zinc center.     

Palladium‐Catalyzed Decarbonylative Trifluoromethylation of Acid Fluorides

While acid fluorides can readily be made from widely available or biomass‐feedstock‐derived carboxylic acids, their use as functional groups in metal‐catalyzed cross‐coupling reactions is rare. This report presents the first demonstration of Pd‐catalyzed decarbonylative functionalization of acid fluorides to yield trifluoromethyl arenes (ArCF₃). The strategy relies on a Pd/Xantphos catalytic system and the supply of fluoride for transmetalation through intramolecular redistribution to the the Pd center. This strategy eliminated the need for exogenous and detrimental fluoride additives and allows Xantphos to be used in catalytic trifluoromethylations for the first time. Our experimental and computational mechanistic data support a sequence in which transmetalation by R₃SiCF₃ occurs prior to decarbonylation.     

Commercial Zinc Oxide (Zn2+) as an Efficient and Environmentally Benign Catalyst for Homogeneous Benzoylation of Hydroxyl Functional Groups

The solvent‐free O‐acylation of some alcohols with benzoyl chloride was carried out to the corresponding benzoylated products in good to excellent yields by the mediation of a catalytic amount (5 mol%) of the commercially available and inexpensive zinc oxide in short reaction times. This methodology represents an eco‐friendly and simple catalytic alternative for benzoylation of primary, secondary, tertiary, and benzylic alcohols with ZnO. This catalytic system was homogeneous because of high solubility of zinc oxide in the reaction medium. Findings showed that ZnO was dissolved in hydrochloric acid, created in situ, after a few minutes. Although, others argued on the catalytic role of solid phase zinc oxide under a heterogeneous condition, it is not surprising to emphasize on the catalytic function of Zn²⁺ in the benzoylation of alcohols under homogeneous reaction conditions. Zinc oxide served as pre‐catalyst to form Zn²⁺, as the catalytically active species.     

Iridium‐Catalyzed Dehydrogenative Decarbonylation of Primary Alcohols with the Liberation of Syngas

A new iridium ‐ catalyzed reaction in which molecular hydrogen and carbon monoxide are cleaved from primary alcohols in the absence of any stoichiometric additives has been developed. The dehydrogenative decarbonylation was achieved with a catalyst generated in situ from [Ir(coe)₂Cl]₂ (coe=cyclooctene) and racemic 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (rac‐BINAP) in a mesitylene solution saturated with water. A catalytic amount of lithium chloride was also added to improve the catalyst turnover. The reaction has been applied to a variety of primary alcohols and gives rise to products in good to excellent yields. Ethers, esters, imides, and aryl halides are stable under the reaction conditions, whereas olefins are partially saturated. The reaction is believed to proceed by two consecutive organometallic transformations that are catalyzed by the same iridium(I)–BINAP species. First, dehydrogenation of the primary alcohol to the corresponding aldehyde takes place, which is then followed by decarbonylation to the product with one less carbon atom.     

Nanosheet‐Enhanced Asymmetric Induction of Chiral α‐Amino Acids in Catalytic Aldol Reaction

An efficient ligand design strategy towards boosting asymmetric induction was proposed, which simply employed inorganic nanosheets to modify α‐amino acids and has been demonstrated to be effective in vanadium‐catalyzed epoxidation of allylic alcohols. Here, the strategy was first extended to zinc‐catalyzed asymmetric aldol reaction, a versatile bottom‐up route to make complex functional compounds. Zinc, the second‐most abundant transition metal in humans, is an environment‐friendly catalytic center. The strategy was then further proved valid for organocatalyzed metal‐free asymmetric catalysis, that is, α‐amino acid catalyzed asymmetric aldol reaction. Visible improvement of enantioselectivity was experimentally achieved irrespective of whether the nanosheet‐attached α‐amino acids were applied as chiral ligands together with catalytic Zn^II centers or as chiral catalysts alone. The layered double hydroxide nanosheet was clearly found by theoretical calculations to boost ee through both steric and H‐bonding effects; this resembles the role of a huge and rigid substituent.     

A Facile Asymmetric Approach to the Multicyclic Core Structure of Mangicol A

Chiral propargylic ether‐based triene–ynes are synthesized with high enantiomeric purity by employing an asymmetric enyne addition to aldehydes catalyzed by 1,1′‐bi‐2‐naphthol in combination with ZnEt₂, Ti(OiPr)₄ and dicyclohexylamine at room temperature. These substrates are found to undergo a one‐pot domino Pauson–Khand and Diels–Alder cycloaddition catalyzed by [RhCl(CO)₂]₂ under CO to generate a series of multicyclic products with high chemoselectivity and stereoselectivity. These products contain the multicyclic core structure of mangicol A which could facilitate the synthesis and study of this class of natural products.     

Zinc(II) complexes of Triaza and Amidinate ligands: Efficient initiators for the ring‐opening polymerization of ε‐Caprolactone and rac‐Lactide

Zinc complexes supported by tertiary 1,3,5‐triazapenta‐1,3‐dienate ligand (L¹) and N ‐benzoyl‐N′ ‐arylbenzamidinate [aryl =2,6‐diisopropylphenyl (L²), phenyl (L³)] ligands have been synthesized and characterized. The reaction of L¹H with ZnEt₂ affords a mononuclear zinc complex [L¹ZnEt] ( 1 ) in good yield. Tetra nuclear zinc complex [(L¹)₂Zn₄O(OAc)₄] ( 2 ) is prepared by treating L¹H with one equivalent of Zn(OAc)₂ in toluene. Further, dinuclear zinc complexes [L²ZnEt]₂ ( 3 ) and [L³ZnEt]₂ ( 4 ) are obtained in good yields from L²H and L³H with ZnEt₂ in toluene respectively_. The complexes 1–4 have been characterized by ¹H/¹³C NMR spectroscopy and single crystal X‐ray diffraction studies. All of the complexes have been explored for their catalytic activity toward the ring‐opening polymerization (ROP) of ε ‐caprolactone. It has been found that complex 1 is an active catalyst for the polymerization of ε ‐caprolactone in presence of a cocatalyst benzyl alcohol (BnOH). While complex 2 is as active as 1 there is no need for a cocatalyst for the polymerization to proceed. Dinuclear zinc complexes 3 and 4 show very high activity for the ROP of ε ‐caprolactone (CL) and rac ‐lactide (LA) without requiring a cocatalyst. The resultant polymers are found to have very high molecular weight (M _n = 296 X 10³ g mol⁻¹) and relatively narrow polydispersity index compared to 1 and 2 .     

Iron-catalyzed boration of allylic alcohols with H3BO3 as an additive

A method for the synthesis of allylboronates by iron-catalyzed boration of allylic alcohols with H₃BO₃ as an additive is developed. The introduction of H₃BO₃ promotes the cleavage of C?O bond in allylic alcohols obviously. Functional groups, such as fluoro, chloro, bromo, alkyl, and alkoxy, are tolerated well. Thus, various allylboronates are obtained in acceptable yield.     

Bond‐Strengthening Backdonation in Aminoborylene‐Stabilized Aminoborylenes: At the Intersection of Borylenes and Diborenes

Singly NHC‐coordinated (aminoboryl)aminoborenium salts react with Na₂[Fe(CO)₄] to yield stable coordination complexes of aminoborylene‐stabilized aminoborylenes, which exhibit exceptional σ‐donor properties. Upon photolytic CO extrusion from the metal center, the diboron ligand adopts a novel η³‐BBN coordination mode, where bond‐strengthening backdonation from the metal center into the vacant B?B π‐orbital is observed. This bonding situation can be alternatively described as a Fe‐diaminodiborene complex. In a related reduction of CAAC‐stabilized (aminoboryl)aminoborenium with KC₈, the reduced species can be captured with nucleophiles to form three‐coordinate (diaminoboryl)borylenes, where both amino groups have migrated to the distal boron atom. Collectively, these reactions illustrate the isomeric flexibility imparted by amino groups on this reduced diboron system, thus opening multiple avenues of novel reactivity.     

Transition‐Metal‐Free Borylation of Allylic and Propargylic Alcohols

The base‐catalyzed allylic borylation of tertiary allylic alcohols allows the synthesis of 1,1‐disubstituted allyl boronates, in moderate to high yield. The unexpected tandem performance of the Lewis acid–base adduct, [Hbase]⁺[MeO‐B₂pin₂]^? favored the formation of 1,2,3‐triborylated species from the tertiary allylic alcohols and 1‐propargylic cyclohexanol at 90 °C.     

Six-Membered NHC Stabilized Monomeric Zinc Complexes

This paper describes the rare use of a 6-membered saturated N-heterocyclic carbene (NHC) known as 1,3-di(2,6-diisopropylphenyl) tetrahydropyrimidine-2-ylidene (abbreviated as 6-SIDipp) as a ligand in zinc chemistry. We report on the investigation of the reactions between 6-SIDipp and ZnX₂, which resulted in a range of new monomeric 6-SIDipp⋅ZnX₂ complexes (X=Et ( 1 ), Cl ( 2 ), Br ( 3 ), and I ( 4 )). We also prepared a new NHC zinc complex where the two substituents of the zinc atom are different, 6-SIDipp⋅Zn(Et)Br ( 7 ) through the reaction of the proligand [6-SIDippH]Br with ZnEt₂. We have observed that the reactions of complex 1 with sulfur and HBpin led to the removal of the ZnEt₂ moiety, resulting in the formation of a C=S double bond and a B−H activation product, respectively. Lastly, the reaction of 1 with five-membered NHCs led to the exchange of carbene and the formation of either 5-IDipp⋅ZnEt₂ ( 8 ) or 5-SIDipp⋅ZnEt₂ ( 9 ).     

Cyclization of Zincated α‐N‐Homoallylamino Nitriles: A New Entry to Enantiopure 2,3‐Methanopyrrolidines

Stereoselective cyclization of zincated α‐N‐homoallylamino nitriles has been developed. Following treatment with lithium diisopropylamide (LDA) and transmetalation with zinc bromide, α‐N‐(1‐phenylethyl)‐N‐homoallylamino nitriles lead to 2,3‐methanopyrrolidines in moderate to good yields (up to 66 %) and excellent selectivities (up to >98:2). With substrates derived from α‐branched homoallylic amines, a stereospecific inversion of the homoallylic stereogenic center was observed. To account for this, a mechanistic rationale involving the formation of zincioiminium ions from zincated α‐amino nitriles is put forward. 2,3‐Methanopyrrolidines should then arise from a sequence involving an aza‐Cope rearrangement providing a configurationally stable (2‐azoniaallyl)zinc species that then undergoes a [3+2] cycloaddition reaction.