The structure, growth and reactivity of electrodeposited Ru/Au(111) surfaces

In order to elucidate electronic effects on the oxidation of CO on small Ru clusters, we investigated this reaction on well defined Ru/Au(111) model systems via parallel in-situ STM studies of the structure and electrochemical deposition of Ru on Au(111) in H₂SO₄ solution and cyclic voltammetry of CO monolayer oxidation on these surfaces. The Ru deposit consists of nanoscale islands, which coalesce with increasing coverage. The Ru saturation coverage depends on the deposition potential, resulting in Ru submonolayer (>0.1 V), (defective) monolayer (≥−0.1 V), and multilayer films (<−0.1 V). At potentials >0.6 V irreversible formation of Ru oxide/hydroxide species is observed, which can be partly reduced in the range 0.4 to 0.0 V. CO stripping commences at ≈0.1 V and occurs over a broad potential range. From the stripping charge a local CO coverage on the Ru monolayer islands of 0.7 ML was estimated. The observed influence of the morphology of the Ru deposit on the CO stripping voltammetry is explained by (local) variations in the CO adsorption energy due to electronic modifications of the Ru film.     

Synthesis and characterization of platinum monolayer oxygen-reduction electrocatalysts with Co–Pd core–shell nanoparticle supports

We synthesized Pt monolayer electrocatalysts for oxygen-reduction using a new method to obtain the supporting core–shell nanoparticles. They consist of a Pt monolayer deposited on carbon-supported Co–Pd core–shell nanoparticles with the diameter of 3–4 nm. The nanoparticles were made using a redox-transmetalation (electroless deposition) method involving the oxidation of Co by Pd cations, yielding a Pd shell around the Co core. The quality of the thus-formed core–shell structure was verified using transmission electron microscopy and X-ray absorption spectroscopy, while cyclic voltammetry was employed to confirm the lack of Co oxidation (dissolution). A Pt monolayer was deposited on the Co–Pd core–shell nanoparticles by the galvanic displacement of a Cu monolayer obtained by underpotential deposition. The total noble metal mass-specific activity of this Pt monolayer electrocatalyst was ca. 3-fold higher than that of commercial Pt/C electrocatalysts.     

From Adlayer Islands to Surface Alloy: Structural and Chemical Changes on Bimetallic PtRu/Ru(0001) Surfaces

The correlation between structural and chemical properties of bimetallic PtRu/Ru(0001) model catalysts and their modification upon stepwise annealing of a submonolayer Pt‐covered Ru(0001) surface up to the formation of an equilibrated Pt_xRu_1?x/Ru(0001) monolayer surface alloy was investigated by scanning tunneling microscopy and by the adsorption of CO and D₂ probe molecules. Both temperature‐programmed desorption and IR measurements demonstrate the influence of the surface structure on the adsorption properties of the bimetallic surface, which can be explained by changes of the composition of the adsorption ensembles (ensemble effects) for D adsorption and by changes in the electronic interaction (ligand effects, strain effects) of the metallic constituents for CO and D adsorption upon alloy formation.     

Au nanowires with high aspect ratio and atomic shell of Pt-Ru alloy for enhanced methanol oxidation reaction

The methanol oxidation reaction(MOR) is the limiting half-reaction in direct methanol fuel cell(DMFC).Although Pt is the most active single-metal electrocatalyst for MOR,it is hampered by high cost and CO poisoning.Constructing a Pt or Ru monolayer on a second metal substrate by means of galvanic replacement of underpotentially deposited(UPD) Cu monolayer has been shown as an efficient catalyst design strategy for the electrocatalysis of MOR because of the presumed 100% utilization of atoms and resistance to CO poisoning.Herein,we prepared one-dimensional surface-alloyed electrocatalyst from predominantly(111) faceted Au nanowires with high aspect ratio as the substrate of under-potential deposition.The electrocatalyst comprises a core of the Au nanowire and a shell of catalytically active Pt coated by Ru.Coverage-dependent electro-catalytic activity and stability is demonstrated on the Pt/Ru submonolayers on Au wires for MOR.Among all these catalysts,Au@Pt_(ML)@Ru_(ML) exhibits the best electrocatalytic activity and poisoning tolerance to CO.This presents a viable method for the rational catalyst design for achieving high noble-metal utilization efficiency and high catalytic performance.     

Electrocatalytic activity of binary Palladium Ruthenium anode catalyst on Ni-support for ethanol alkaline fuel cells

In search for a cheaper anode catalyst for the oxidation of ethanol for development of direct alcohol fuel cells, Pd has been considered here as an interesting substitute for Pt in Pt Ru binary electrodeposite. The binary catalyst when co-deposited on nickel support has been found to increase the current density and decrease the anodic overvoltage significantly with respect to pure Pt, Pd and Ni. Its electrocatalytic capability is also comparable with that of the Pt-Ru binary electrocatalyst on Ni-support, when studied in 1 M EtOH containing 1 M NaOH solution. The effect of loading of Pd Ru electrocatalyst on Ni support has also been tested. The electrocatalytic activity of the electrodes for oxidation of ethanol has been explained by studies of cyclic voltammetry, chronopotentiometry, steady-state polarization, and conjugated scanning electron microscopy–energy dispersion X-ray spectroscopy. It has been found that electrode containing the higher amount of deposit are less affected by carbonaceous poisons.     

Palladium-Carbon Composite Nanoparticle Films with Enhanced Electrocatalytic Activity for Hydrogen Peroxide Sensors

A nanocomposite electrocatalyst was prepared with the method of cluster beam deposition of palladium nanoparticle thin lms on carbon nanoparticle supporting layers and used as sensitive nonenzyme hydrogen peroxide sensors. An enhancement on the electrocatalytic activity of the palladium nanoparticles toward H₂O₂ reduction was observed, which was related to the coverage of the carbon nanoparticles. With one monolayer of carbon nanoparticles, the H₂O₂ detection sensitivity reached the maximum, which was more than twice of that of the pure Pd nanoparticles.     

Palladium monolayer and palladium alloy electrocatalysts for oxygen reduction

We investigated the oxygen-reduction reaction (ORR) on Pd monolayers on various surfaces and on Pd alloys to obtain a substitute for Pt and to elucidate the origin of their activity. The activity of Pd monolayers supported on Ru(0001), Rh(111), Ir(111), Pt(111), and Au(111) increased in the following order: Pd/Ru(0001) < Pd/Ir(111) < Pd/Rh(111) < Pd/Au(111) < Pd/Pt(111). Their activity was correlated with their d-band centers, which were calculated using density functional theory (DFT). We found a volcano-type dependence of activity on the energy of the d-band center of Pd monolayers, with Pd/Pt(111) at the top of the curve. The activity of the non-Pt Pd2Co/C alloy electrocatalyst nanoparticles that we synthesized was comparable to that of commercial Pt-containing catalysts. The kinetics of the ORR on this electrocatalyst predominantly involves a four-electron step reduction with the first electron transfer being the rate-determining step. The downshift of the d-band center of the Pd "skin", which constitutes the alloy surface due to the strong surface segregation of Pd at elevated temperatures, determined its high ORR activity. Additionally, it showed very high methanol tolerance, retaining very high catalytic activity for the ORR at high concentrations of methanol. Provided its stability is satisfactory, this catalyst might possibly replace Pt in fuel-cell cathodes, especially those of direct methanol oxidation fuel cells (DMFCs).     

Kinetically Limited CO Adsorption: Spill-Over as a Highly Effective Adsorption Pathway on Bimetallic Surfaces

We demonstrate that the (local) adsorbed carbon monoxide, CO_ad, coverage on the Pt-free areas of bimetallic Pt/Ru(0001) surfaces (a Ru(0001) substrate partly covered by Pt monolayer islands) can be increased to ∼0.80 monolayers (ML), well above the established saturation CO_ad coverage of 0.68 ML, even under ultrahigh vacuum conditions by using spill-over of CO adsorbed on the Pt islands to the Ru areas as an highly effective adsorption channel. The apparent CO_ad saturation coverage of 0.68 ML on pure Ru(0001) is identified as due to kinetic limitations, hindering further uptake from the gas phase, rather than being caused by thermodynamic reasons. This spill-over mechanism is proposed to be a general phenomenon for adsorption on bimetallic surfaces.     

Ubiquitous strategy for probing ATR surface-enhanced infrared absorption at platinum group metal-electrolyte interfaces

A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.     

Controlled Aqueous Solution Synthesis of Platinum–Palladium Alloy Nanodendrites with Various Compositions Using Amphiphilic Triblock Copolymers

In a recent study, we demonstrated that Pluronic F127 triblock copolymer plays a critical role in the formation of dendritic Pt nanostructures (L. Wang, Y. Yamauchi, J. Am. Chem. Soc. 2009 , 131, 9152–9153). Herein, we expand this concept to produce novel dendritic Pt–Pd alloy nanoparticles. In this paper, a very simple, one‐step and efficient route is proposed to directly produce dendritic Pt–Pd alloy nanoparticles with high surface area in high yield, which is carried out simply by stirring an aqueous solution that contains K₂PtCl₄ and Na₂PdCl₄ binary precursors in the presence of Pluronic F127 block copolymer and ascorbic acid at room temperature within 30 min without the need for any template, seed‐mediated growth, or additive. By simply changing the compositional ratios of the Pt and Pd sources in the precursor solutions, Pt–Pd nanodendrites with various compositions can be easily produced. Because of its unique simplicity, the proposed approach can be considered as a powerful strategy for producing Pt–Pd alloy nanoparticles with unique nanoarchitectures for commercial devices.     

Surface structural and chemical characterization of Pt/Ru composite electrodes: a combined study by XPS, STM and IR spectroscopy

Electrochemical Ru deposits on Pt(111) surfaces are investigated by STM; the images of the Ru-modified surfaces show islands of monoatomic height and between 2–5 nm in diameter. The density of islands on the surface depends on the Ru deposition potential (observed by STM and XRSD) and the cyclic voltammograms indicate an increasing Ru coverage for lower deposition potentials. The Ru surface coverage is determined by ex-situ XPS measurements and a linear dependence of the Ru coverage on the deposition potential is demonstrated. IR spectra of a monolayer of adsorbed CO on the Ru-modified Pt(111) surfaces show distinct bands for CO adsorbed on Pt and on Ru. For the integrated band intensity of the CO/Ru vibration a linear dependence on deposition potential is found indicating that lateral dipole interactions between CO adsorbed on Pt and Ru are unimportant and that the CO coverage on the Ru islands is constant for the Ru coverages investigated. The possibility of using adsorbate vibrational bands for the determination of the coverage of deposits is discussed. Received: 24 June 1996 / Revised: 6 December 1996 / Accepted: 12 December 1996     

Investigation of ruthenium deposition onto a platinized platinum electrode in sulfuric acid media

Ruthenium deposition onto platinized Pt electrode in 0.5 M H₂SO₄ solution is investigated. The I–V profiles of the Pt electrode covered with Ru depend on the potential of Ru deposition. This phenomenon is explained by the increasing degree of oxidation of the Ru layers deposited at higher potentials. Oxidation of Ru deposited at low potentials begins with comparatively slow processes. A mechanism for Ru deposition via ionization of hydrogen adsorbed on platinized Pt electrode is proposed.     

Binding energy of ruthenium submonolayers deposited on a Pt(111) electrode

We investigated the 3d_5/2 core-level binding energy of Ru in Ru nanoislands spontaneously deposited on a Pt(111) electrode [Pt(111)/Ru], and the binding energies of 3d_5/2 iodine and 1s CO adsorbed on Pt(111)/Ru by the use of X-ray photoelectron spectroscopy. Both iodine and CO were used as surface probes of the electronic properties of Pt(111)/Ru. Little difference was found in the binding energy of Ru in Pt(111)/Ru and in Ru(0001). However, the addition of Ru to Pt(111) induces major changes in the core-level binding energies of chemisorbed iodine and CO as referenced to those adsorbed on Ru(0001). We conclude that the iodine 3d_5/2 and CO 1s C core levels experience higher electronic charge on Pt(111)/Ru than on Ru(0001), suggesting a charge transfer from Pt to Ru, or to a Ru-I surface molecule within the deposit. The charge transfer from Pt to Ru is in agreement with the result of previous in situ electrochemical NMR investigations [P.K. Babu, H.S. Kim, A. Wieckowski, E. Oldfield (2003) J. Phys. Chem. B 107:7595] and confirms the general trend of reduction in the density of states of Pt due to alloying with Ru [J. McBreen, S. Mukerjee (1995) J. Electrochem. Soc. 142:3399]. Theoretical calculations are in progress to further interpret the origin of the binding-energy shifts observed in this study.Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

Bimetallic Cluster Provides a Higher Activity Electrocatalyst for Methanol Oxidation

The cluster complex Pt₂Ru₄(CO)₁₈ was used as a precursor to prepare a 60 wt% 1:2 Pt:Ru nanoparticles on carbon (PtRu/C) for use as an electrocatalyst for methanol oxidation. This bimetallic carbonyl cluster complex was found to provide smaller, more uniform bimetallic nanoparticle that exhibited higher electrocatalytic activity than a 60 wt% 1:1 Pt:Ru commercial catalyst from E-Tek. Using bimetallic cluster precursors simplifies the synthetic procedures by reducing the need for high temperature reduction and assures a more intimate mixing of the two different metals. Transmission electron microscopy (TEM) images of the catalyst obtained from the cluster precursor showed bimetallic nanoparticles having a narrow size range of 2–3 nm that were dispersed uniformly over the surface of the support. Images of the commercial catalyst showed particles 3–4 nm in diameter that tended to agglomerate near the edges of the carbon support particles. Cyclic voltammograms of methanol oxidation from the two catalysts showed significantly higher activity for the cluster-derived catalyst. The onset potential for methanol oxidation for the cluster-derived catalyst was approximately 170 mV lower than that of the commercial catalyst at 100 A/g Pt, and approximately 250 mV lower at 400 A/g Pt. ^* This report is dedicated to Prof. Günter Schmid on the occasion of his 70th birthday.     

Examination of Pt(111)/Ru and Pt(111)/Os surfaces: STM imaging and methanol oxidation activity

Ruthenium and osmium were deposited in submonolayer amounts on Pt(111) single crystal surfaces using the previously reported ‘spontaneous deposition’ procedure [Chrzanowski et al., Langmuir, 13 (1997) 5974]. Such surfaces were first explored using ex situ scanning tunneling microscopy (STM) to image the deposition characteristics of ruthenium and osmium islands on Pt(111). It was found that, using the spontaneous deposition procedure, a maximum coverage of 0.20 ML ruthenium is formed on the surface after 120 s of exposure to a RuCl₃ solution in 0.1 M HClO₄. A homogeneous deposition on the Pt(111) surface was found, with no observed preferential deposition on step edges or surface defect sites. In contrast, in the spontaneous deposition of osmium, osmium clusters form preferentially at, though not limited to, surface defect sites and step edges. Osmium island deposition occurs at a greater rate than ruthenium on Pt(111), and possible explanations are presented. Methanol activity on the Pt(111)/Ru and Pt(111)/Os surfaces is also studied, using the coverage values determined to yield the highest activity for methanol electro-oxidation (0.20 ML coverage for Ru and 0.15 ML for Os). At potentials more negative than 0.40 V vs. RHE, the Pt(111)/Ru surface yields a higher surface activity than Pt(111)/Os. However, at potentials more positive than 0.04 V, Pt(111)/Os exhibits demonstrably higher surface activity. The relevance of this data is discussed and future avenues of interest are indicated.     

Interaction of CO and deuterium with bimetallic, monolayer Pt-island/film covered Ru(0001) surfaces

The adsorption properties of structurally well defined bimetallic Pt/Ru(0001) surfaces, consisting of a Ru(0001) substrate partly or fully covered by monolayer Pt islands or a monolayer Pt film, were studied by temperature programmed desorption (TPD) using CO and deuterium as probe molecules. Additionally, the adsorption of CO was investigated by infrared reflection absorption spectroscopy (IRAS). The presence of the pseudomorphic platinum islands or monolayer film leads to considerable modifications of the adsorption properties for both adsorbates, both on the Pt covered and, to a smaller extent, on the bare Ru part of the surfaces. In addition to distinct weakly bound adspecies, which are adsorbed on the monolayer Pt islands, we find unique contributions from island edge desorption, from spill-over processes during the desorption run, and a general down-shift of the peak related to desorption from Pt-free Ru(0001) areas with increasing Pt coverage. These effects, which we consider as characteristic for adsorption on bimetallic surfaces with large contiguous areas of the respective types, are discussed in detail.     

Electrocatalysts for methanol oxidation with ultra low content of Pt and Ru

We have developed efficient electrocatalysts for methanol oxidation using new synthetic method facilitating deposition of Pt–Ru very thin nanoplatelets on carbon nanoparticles The method involves oxidation of carbon support, adsorption of Pb²⁺, its reduction and galvanic displacement of Pb⁰ by Pt and/or Ru. The Pt mass activity of this catalyst is about 10 times higher than that of the commercial Pt–Ru/C. The catalyst with the 1:1 Pt/Ru ratio displayed the highest methanol oxidation activity per surface Pt atom. Our results demonstrate the new synthetic method that yields the catalyst with potential for solving the problem of high Pt loading in direct methanol fuel cell anodes.     

Density functional calculations on CO attached to PtnRu(10−n) (n = 6–10) clusters

B3LYP and SCF‐Xα calculations have been performed on Pt_nRu_(10−n)CO (n = 6–10) clusters. The work aims to simulate the adsorption of CO on the (111) surface of platinum metal and to examine the electronic effects that arise when some Pt atoms are replaced with Ru. Adsorption energies and Pt C and C O stretching frequencies have been calculated for each cluster. Ru does affect the electronic structure of the clusters, the calculated adsorption energies, and frequencies, the Pt C frequency more than the C O. The donation‐backbonding mechanism that accompanies the shift in CO stretching frequency that occurs when CO adsorbs on platinum does not explain the differences in frequency shift observed in CO on various Pt/Ru surfaces. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 77: 589–598, 2000     

High Electrocatalytic Activity of Pt–Pd Binary Spherocrystals Chemically Assembled in Vertically Aligned TiO2 Nanotubes

To obtain noble metal catalysts with high efficiency, long‐term stability, and poison resistance, Pt and Pd are assembled in highly ordered and vertically aligned TiO₂ nanotubes (NTs) by means of the pulsed‐current deposition (PCD) method with assistance of ultrasonication (UC). Here, Pd serves as a dispersant which prevents agglomeration of Pt. Thus Pt–Pd binary catalysts are embed into TiO₂ NTs array under UC in sunken patterns of composite spherocrystals (Sps). Owing to this synthesis method and restriction by the NTs, the these catalysts show improved dispersion, more catalytically active sites, and higher surface area. This nanotubular metallic support material with good physical and chemical stability prevents catalyst loss and poisoning. Compared with monometallic Pt and Pd, the sunken‐structured Pt–Pd spherocrystal catalyst exhibits better catalytic activity and poison resistance in electrocatalytic methanol oxidation because of its excellent dispersion. The catalytic current density is enhanced by about 15 and 310 times relative to monometallic Pt and Pd, respectively. The poison resistance of the Pt–Pd catalyst was 1.5 times higher than that of Pt and Pd, and they show high electrochemical stability with a stable current enduring for more than 2100 s. Thus, the TiO₂ NTs on a Ti substrate serve as an excellent support material for the loading and dispersion of noble metal catalysts.     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.