表面活性剂溶致液晶的流变学性质*

系统阐述了三种溶致液晶(六角状、立方状和层状液晶)的流变性质,概括了各自的流变性特点并给出了其理论模型,特别对立方相的流变学模型和层状相的剪切诱导转变作用进行了较详细的说明.讨论了因为这种转变而导致的囊泡的形成,并且在表面活性剂和嵌段共聚物中均可观察到剪切诱导的结构转变.     

Microstructure and rheological properties of liquid crystallines formed in Brij 97/water/IPM system

The phase diagram of Brij 97/water/IPM systems was determined at 25 degrees C. Rich liquid crystalline phases including Lalpha, H1, and cubic Fd3m phases were identified by means of small angle X-ray scattering (SAXS). Microstructure transitions of liquid crystals with changes in surfactant concentration and oil content are explained qualitatively by the surfactant packing parameter (vL/aSlc). Dynamic rheological results indicate that all three kinds of liquid crystals investigated show high elasticity. The lamellar, Lalpha, phases formed in Brij 97/water with two different oils, oleic acid and geraniol, were also studied in comparison with those of Brij 97/water/IPM systems. The strength of the network of lamellar phases formed in Brij 97/water/oleic acid and Brij 97/water/geraniol systems are appreciably stronger than for Brij 97/water/IPM systems, indicated by the smaller area of surfactant molecules at the interface and the higher moduli (G' and G').     

Lyotropic liquid crystalline phase behaviour in amphiphile-protic ionic liquid systems

Approximate partial phase diagrams for nine amphiphile-protic ionic liquid (PIL) systems have been determined by synchrotron source small angle X-ray scattering, differential scanning calorimetry and cross polarised optical microscopy. The binary phase diagrams of some common cationic (hexadecyltrimethyl ammonium chloride, CTAC, and hexadecylpyridinium bromide, HDPB) and nonionic (polyoxyethylene (10) oleyl ether, Brij 97, and Pluronic block copolymer, P123) amphiphiles with the PILs, ethylammonium nitrate (EAN), ethanolammonium nitrate (EOAN) and diethanolammonium formate (DEOAF), have been studied. The phase diagrams were constructed for concentrations from 10 wt% to 80 wt% amphiphile, in the temperature range 25 °C to >100 °C. Lyotropic liquid crystalline phases (hexagonal, cubic and lamellar) were formed at high surfactant concentrations (typically >50 wt%), whereas at <40 wt%, only micelles or polydisperse crystals were present. With the exception of Brij 97, the thermal stability of the phases formed by these surfactants persisted to temperatures above 100 °C. The phase behaviour of amphiphile-PIL systems was interpreted by considering the PIL cohesive energy, liquid nanoscale order, polarity and ionicity. For comparison the phase behaviour of the four amphiphiles was also studied in water.     

The effects of some factors on the rheological properties of the lyotropic liquid crystals formed in Brij97/NaDC/IPM/water system: compositions,temperature and polyphenols

In this paper, interaction between Brij97 and NaDC in mixed micelles was studied by surface tension method. Phase behavior for Brij97/NaDC/IPM/H₂O system was investigated at the desire molar ratio of α_NaDC?=?0.42 and the human body temperature of 37?°C. Hexagonal and cubic liquid crystal were found in this system analyzed by small angle x-ray scattering (SAXS). some factors were changed to affect the rheological properties of liquid crystal. Rheological investigations showed: The higher content of water and lower experimental temperature favored the greater values of shear viscosity and viscoelastic modulus; The sample was closer to the plastic fluid and was more likely to recover from disturbed state to equilibrium state at lower ratio of NaDC; The curcumin and TP can influence the shear viscosity, viscoelastic properties and phase transition temperature, even change the structure of liquid crystal. This supplies a way to adjust rheological properties, structure and even phase transition by altering those factors.     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

Lyotropic Liquid Crystals Formed by Brij 97/PEO‐PPO‐PEO Mixtures

The phase diagrams of Brij 97/(PEO)_m(PPO)_n(PEO)_m/water/IPM quaternary systems (A L‐64: m=13, n=30; A L‐62: m=7, n=32; A L‐61: m=3.5, n=31) were determined at 25°C. The liquid crystalline phases (lamellar L_αand hexagonal H₁) were investigated by means of small angle x‐ray scattering (SAXS) and rheological techniques, with comparison of composition and component effects. The lamellar phases formed in Brij 97/A L‐64 and Brij 97/A L‐62 systems array more orderly than that of Brij 97/A L‐61 system, indicated by the stronger intensity of the second reflection peak in the SAXS patterns and the higher moduli (G′ and G″) in the dynamic rheograms. In Brij 97/A L‐64/water/IPM system, all L_α phases exhibit elastic rheograms, moreover the viscous property get increased with increase in water content. On the other hand, with this change, the H₁ phases show Maxwell and gel‐like rheograms in order, in which the latter shows mechanical and relaxation spectra typical of highly structured materials.     

Synthesis and lyotropic phase behavior of novel nonionic surfactants for the crystallization of integral membrane proteins

A series of new sugar-based nonionic surfactants have been synthesized and their lyotropic liquid crystalline properties characterized. When in contact with water, these surfactants formed a range of lyotropic liquid crystalline phases, including cubic, hexagonal, and lamellar, as well as a separate micellar phase. These are features that have promise for the crystallization of integral membrane proteins.     

Lamellar Liquid Crystals of Brij 97 Aqueous Solutions Containing Different Additives

Lamellar liquid crystals of Brij 97 aqueous solutions were investigated by means of rheological techniques and SAXS at 25 °C, in the presence of various additives including isopropyl myristate, oleic acid, ionic liquid bmim-PF₆ and bmim-BF₄. The lamellar phases show high elasticity as indicated by their mechanical and discrete relaxation spectra, which is expected to be an advantage when they are used as drug delivery vehicles. It is noted that in comparison with other systems, the lamellar phase formed in the Brij 97/water/IPM system has the lowest storage and loss moduli, implying that it has a weak network strength and less stable internal structure. The Brij 97/water/oleic acid system is the most shear resistance, whereas the Brij 97/water/bmim-PF₆ system exhibits fluid-like viscoelastic properties to some extent. These differences are analyzed through SAXS data for the different location of the additive in the lamellar phase.     

Microstructure and dynamics in lyotropic liquid crystals. Principles and applications of nuclear spin relaxation

Abstract

Nuclear spin relaxation of quadrupolar nuclei provides access to a wide range of properties of lyotropic liquid crystals, ranging from the molecular ordering and dynamics at the interface to the macroscopic viscoelastic behaviour. We emphasize here the unique capability of the spin relaxation method to provide detailed geometric and dynamic information relating to the microstructure of lyotropic liquid crystals, i.e. the metric, curvature, and fluctuations of the dividing interface that separates polar and non-polar regions. This information is conveyed to the spin system via the translational diffusion of surfactants or counterions over the interface. The general principles of the spin relaxation method, as applied to lyotropic liquid crystals, are described, with emphasis on the model-independent information content of the relaxation observables and on the relation to microstructure. Specific results for lamellar, hexagonal, cubic, and nematic phases are also described.     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system: By means of polarizing microscope, SAXS, 2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, ²H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA’ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

Study on the formation and rheological properties of sucrose stearate lamellar liquid crystals

The phase diagrams of S1570–Brij 97/oleic acid/water system at two different S1570/Brij 97 mass ratios of 1/1 (system S) and 7/3 (system P) were determined at 37°C, respectively. The microstructures and rheological properties of liquid crystals at constant surfactants/water mass ratio of 1/1 were studied with increase in oil content. Small-angle x-ray scattering measurements showed that system S exhibited a typical lamellar liquid crystals and the repeat distance (d) decreased as oil content increased. While for system P, two couples of scattering peaks were observed when oil content reached 28 wt%. This indicated that adding oil content may give rise to a multilamellar structures in the higher S1570/Brij 97 mass ratio system. The rheological tests indicated that a transition from elastic gel-like properties to viscoelastic liquid-like properties appeared in both system S and P when oil content reached 20 wt%, corresponding to the polarizing optical microscopy textures changing from oily streak to cruciate flower. This supplies a way to adjust structure, rheological properties, and even phase transition by altering the S1570/Brij 97 mass ratio and oleic acid content in system.     

Curcumin-Encapsulated Hexagonal Liquid Crystalline Formed by Brij 97/NaDC Mixtures

The phase diagram of a five-components Brij 97-NaDC/IPM-PEG 400/H₂O system was determined at 25°C. The hexagonal liquid crystalline phase (H₁) was found in this system. By use of small-angle x-ray scattering (SAXS), polarization microscopy, and rheology techniques, the influence of composition, temperature, and addition of curcumin on H₁ phase was studied. It is shown that: 1) the investigated hexagonal liquid crystals exhibit a strong shear thinning behavior and viscoelasticity and the strength of the network of H₁ phase becomes weaker with increasing oil content; 2) the frequency-dependent moduli of H₁ samples decreases as the temperature increases and the steady-state limiting viscosity of the hexagonal samples shows an Arrhenius-like dependence on temperature; and 3) samples in H₁ phase containing curcumin retained their organized hexagonal structure. The SAXS results show that the curcumin molecules may be solubilized both into the apolar core of cylinders together with IPM and in the polar domain coexisting with PEG 400 between the cylinders. When curcumin is encapsulated in samples with low oil content, there is a significant decrease in the frequency-dependent moduli. The tendency of frequency behavior for samples incorporating curcumin as a function of temperature is weakened.     

Microstructure and dynamics in lyotropic liquid crystals. Principles and applications of nuclear spin relaxation

Nuclear spin relaxation of quadrupolar nuclei provides access to a wide range of properties of lyotropic liquid crystals, ranging from the molecular ordering and dynamics at the interface to the macroscopic viscoelastic behaviour. We emphasize here the unique capability of the spin relaxation method to provide detailed geometric and dynamic information relating to the microstructure of lyotropic liquid crystals, i.e. the metric, curvature, and fluctuations of the dividing interface that separates polar and non-polar regions. This information is conveyed to the spin system via the translational diffusion of surfactants or counterions over the interface. The general principles of the spin relaxation method, as applied to lyotropic liquid crystals, are described, with emphasis on the model-independent information content of the relaxation observables and on the relation to microstructure. Specific results for lamellar, hexagonal, cubic, and nematic phases are also described.     

LYOTROPIC LIQUID CRYSTALS IN BINARY SYSTEMS N-ALKYL GLYCOSIDES/WATER*

The formation of lyotropic mesophases (liquid crystals) in four binary systems n-alkyl glycosides/water was examined in dependence on surfactant concentration, temperature and the chain lengths (alkyl = heptyl, octyl, nonyl, decyl). The binary phase diagrams were established and the enthalpies of phase transitions were measured. The following phase transitions were detected by texture observation and calorimetry: hexagonal phase H, lamellar phase L, cubic phase Q, gel phase G and crystalline phase C. The positions of the corresponding regions of these phases in the phase diagram were determined. Sequence of phases and the localization of the phase regions were depended on the chain length of the alkyl group. So in the binary system n-decyl-β-D-glucoside/water the H-phase was not observed.     

Phase behavior of lipid-based lyotropic liquid crystals in presence of colloidal nanoparticles

We have investigated the microstructure and phase behavior of monoglyceride-based lyotropic liquid crystals in the presence of hydrophilic silica colloidal particles of size comparable to or slightly exceeding the repeat units of the different liquid crystalline phases. Using small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC), we compare the structural properties of the neat mesophases with those of the systems containing silica colloidal particles. It is found that the colloidal particles always macrophase separate in inverse bicontinuous cubic phases of gyroid (Ia3d) and double diamond (Pn3m) symmetries. SAXS data for the inverse columnar hexagonal phase (H(II)) and lamellar phase (L(α)) suggest that a low volume fraction of the nanoparticles can be accommodated within the mesophases, but that at concentrations above a given threshold, the particles do macrophase separate also in these systems. The behavior is interpreted in terms of the enthalpic and entropic interactions of the nanoparticles with the lamellar and hexagonal phases, and we propose that, in the low concentration limit, the nanoparticles are acting as point defects within the mesophases and, upon further increase in concentration, initiate nucleation of nanoparticles clusters, leading to a macroscopic phase separation.     

Amphiphilic N-benzoyl-1-amino-1-deoxy-D-glucitol derivatives forming thermotropic lamellar, columnar and different types of cubic mesophases

Novel amphiphilic glucamine derivatives have been synthesized. These are N-benzoyl-1-deoxy1-methylamino-D-glucitols and N-benzoyl-1-amino-1-deoxy-D-glucitols carrying one, two or three aliphatic chains (CnH2n 1O- with n 3, 6 and 12) grafted to the benzamido group. The thermotropic mesophases of these compounds were studied by thermal polarizing optical microscopy and differential scanning calorimetry, and some also by X-ray scattering. Depending on the number and the length of the alkyl chains lamellar, bicontinuous cubic, hexagonal columnar or inverted micellar cubic mesophases were detected by analogy with lyotropic systems. In the contact region between lamellar phases of the single chain amphiphiles and micellar cubic phases of the mesomorphic triple chain compounds, hexagonal columnar phases can be induced. A hexagonal columnar phase was also induced in the contact region between a bicontinuous and a micellar cubic mesophase. The lyotropic liquid crystalline behaviour of the dodecyloxy substituted N-benzoyl-1-deoxy-1-methylamino-D-glucitols was investigated by the solvent penetration method using ethylene glycol as protic solvent. On increasing the solvent content, the double chain compound forms a cubic and a lamellar mesophase and the triple chain compound forms a hexagonal columnar lyomesophase. The dodecyloxy substituted compounds were also investigated with respect to their behaviour as thin films at the air-water interface using a Langmuir film-balance. Different types of pi/Aisotherms were observed whereby the molecular areas at collapse were determined either by the size of the carbohydrate head group (single chain compounds) or by the number of alkyl chains (double and triple chain compound).     

Templating Polymerization of Dodecylammonium Surfactants with Polymerizable (Meth)acrylate Counter Ions

Both dodecylammonium acrylate (I) and dodecylammonium methacrylate (II) are reactive surfactants in which the polymerizable group is the organic counterion. Templating polymerization of I and II from the lyotropic liquid crystalline (LLC) lamellar phase was successfully performed with conservation of the supramolecular structure. A 20 wt% aqueous solution of II formed cubic bicontinuous phases, even upon addition of divinyl benzene (DVB). Polymerization from the cubic phases was attempted without and with DVB (3 wt%). Bicontinuous cubic phases always evolved toward lamellar structures upon polymerization.     

Ordered 2-D and 3-D nanostructured amphiphile self-assembly materials stable in excess solvent

Amphiphile lyotropic liquid crystalline self-assembly materials are being used for a diverse range of applications. Historically, the most studied lyotropic liquid crystalline phase is probably the one-dimensional (1-D) lamellar phase, which has been employed as a model system for biomembranes and for drug delivery applications. In recent years, the structurally more complex 2-D and 3-D ordered lyotropic liquid crystalline phases, of which reversed hexagonal (H(2)) and reversed cubic phases (v(2)) are two prominent examples, have received growing interest. As is the case for the lamellar phase, these phases are frequently stable in excess water, which facilitates the preparation of nanoparticle dispersions and makes them suitable candidates for the encapsulation and controlled release of drugs. Integral membrane protein crystallization media and templates for the synthesis of inorganic nanostructured materials are other applications for 2-D and 3-D amphiphile self-assembly materials. The number of amphiphiles identified as forming nanostructured reversed phases stable in excess solvent is rapidly growing. In this article, different classes of amphiphiles that form reversed phases in excess solvent are reviewed, with an emphasis on linking phase behavior to amphiphile structure. The different amphiphile classes include: ethylene oxide-, monoacylglycerol-, glycolipid-, phosphatidylethanolamine-, and urea-based amphiphiles.     

Lyotropic liquid crystalline phases formed in ternary mixtures of 1-cetyl-3-methylimidazolium bromide/p-xylene/water: a SAXS, POM, and rheology study

The phase behavior of ternary mixtures of 1-cetyl-3-methylimidazolium bromide (C(16)mim-Br)/p-xylene/water is studied by small-angle X-ray scattering (SAXS), polarized optical microscopy (POM), and rheology measurements. Two types of lyotropic liquid crystalline phases are formed in the mixtures: hexagonal and lamellar. The structural parameters of the lyotropic liquid crystalline phases are calculated. Greater surfactant content in the sample leads to denser aggregation of the cylindrical units in the hexagonal liquid crystalline phase. The increase in lattice parameter and thickness of the water layer in lamellar phase are attributed to the increase of water content, and the area per surfactant molecule at the hydrophobic/hydrophilic interface for lamellar phase is found to be larger than that for hexagonal phase. The structural parameters of the liquid crystalline phases formed from the cetyltrimethylammonium bromide (CTAB) system are larger than those for the C(16)mim-Br system. The rheological properties of the samples are also found to be related to the structure of the liquid crystalline phases.     

Synthesis, characterization and catalytic activity of highly ordered hexagonal and cubic composite monoliths

Design of nanocatalysts for efficient heterogeneous catalytic systems is needed to high ingredients for environmental cleanup of organic pollutant species. Here, well-defined order NiO-silica monolithic catalysts with hexagonal P6mm and cubic Pm3n mesostructures were successfully fabricated by using an instant direct-templating method of lyotropic and microemulsion phases of Brij 76 (C18H37(OCH2CH2)10 OH, C18EO 10). Ordered hexagonal P6mm NiO/HOM-2 monoliths could be fabricated in lyotropic system of Brij 76 at phase composition domains of TMOS/Brij 76 (50 wt%). However, periodically ordered cubic Pm3n NiO-supported monoliths were synthesized in microemulsion system formed by addition of C12-alkane to the hexagonal phase domains. This synthetic strategy also revealed that the NiO particles were well-dispersed into the silicate pore surface matrices of mesostructures. Monolithic NiO-silica composites with 2D hexagonal and 3D cubic geometries and with large particle morphologies show promise to act as catalysts. The current study revealed evidence of the advantages of nanoscale pore geometry and shape, and particle morphology of the supported silica monoliths in the design of nanocatalysts that can efficiently enhance the catalytic functionality in terms of stability, reversibility and reactivity. Furthermore, a key finding in our study was that 2D hexagonal and 3D cubic mesostructured NiO-silica catalysts retained the specific activity towards the oxidation reaction even after several regeneration/reuse cycles. Significant study of the mechanistic cyclization of the organic reactant using the density functional (DFT) calculations provided evidence of the key components of conformations of the functional model during the formation of the oxidation product.