On triazoles. V. Synthesis of 1- and 2-R1-3-R2,R3-amino-5-amino-1,2,4-triazoles

The correct isomeric and tautomeric structure of different 1- and 2-R¹-3-R²,R³-amino-5-amino-1,2,4-triazole derivatives prepared from the corresponding N-cyano-N'-R²,R³-S-methyl-isothioureas and the corresponding hydrazines was proved with the help of their ir, uv, ¹H-nmr and ¹³C-nmr spectra as well as the uv spectra of the Schiff bases of an isomeric pair.     

Heterylation of 3-R1-5-R2-1,2,4-Triazoles with Derivatives of 3,5-Dinitro-1,2,4-Triazole

Heterylation of 3-R¹-5-R²-1'2'4-triazoles (pK _a 3-12) with N-alkyl-, N-alkenyl-, N-alkoxy-carbonyl-, N-oxoalkyl-, N-nitroxyalkyl, N-nitroaminoalkyl-3'5-dinitro-1'2'4-triazoles results insubstitution of a nitro group in 5 position of the dinitro compound yielding 1-R-methyl-3-nitro-5-(3-R¹-5-R²-1,2,4-triazolyl)-1,2,4-triazoles. The side processes: Hydroxide-ion attack on C⁵ and (or) N¹ of the ring both in the substrate and in the target compound afford 1-R-methyl3-nitro-1,2,4-triazol-5-ones, 3,5-dinitro-1,2,4-triazole and NH-acids of N-C-bitriazole series. Optimal reaction media are aprotic dipolar substances, and for compounds prone to heterolysis ethyl acetate-water systems. The azole pK _a is the decisive factor controlling the composition and the ratio of reaction products. The process is promising for azoles with pK _a > 5, and the optimal range of pK _a is 8-10.     

Heterocyclic variants of the 1,5-benzodiazepine system. V. Derivatives of 2-(ortho-R1-anilino)-4-(p-R2-phenyl)-3H-1,5-benzodiazepines

Mono-N-methylation of 2-(ortho-R₁-anilino)-4-(p-R₂-phenyl)-3H-1,5-benzodiazepines IV is achieved in moderate yield with sodium hydride in methyl iodide. Reaction of the N-methyl derivatives I with methoxyacetyl chloride gave the compounds II and III . The structure of all products was confirmed by ir, ¹H-nmr and mass spectrometry.     

Potential antipsychotic agents. Part 8. Antidopaminergic properties of a potent series of 5-substituted (−)-(S)-N-[(1-ethylpyrrolidin-2-yl)methyl]-2,3-dimethoxybcnzaimides. Synthesis via common lithio intermediates

A series of 5-substituted (?)-(S)-N-[(1-ethylpyrrolidin-2-yl)methyl]-2,3-diniethoxybenzanndes were made by reaction of the corresponding benzoyl chlorides with (S)-1-ethylpyrrolidine-2-methylaruine (→ 14–16 , 18–21 ). The acids required were prepared in a regiospecific manner from 5-bromo-2,3-dimethoxybenzoic acid which was protected as dihydrooxazole (→ 4–8 ), metalated, reacted with various electrophiles (MeI, EtI, BuBr, CC1³CCl³ or MeSSMe), and hydrolyzed (→ 9–13 ). Alternatively, (-)-(S)-5-bromo-N-[(1-ethylpyrrolidin-2-yl)methyl]-2,3-di-methoxybenzamide was treated with KH followed by BuLi and an electrophile (I₂ or Me³SiCl) to give the 5-iodo and 5-(trimethylsilyl) derivatives 17 and 22 , respectively. All 5-substituted amides were highly potent inhibitors of [³H]spiperone binding in rat striatal membranes with IC⁵⁰ values of 0.5 to 5 nM (Table 3). Thus, a relatively large steric bulk can be accomodated in the position para to the 2-MeO group. This work also supports the notion that a positive as well as negative electrostatic potential can be located in this position. A selected number of derivatives were also investigated in vivo and found to inhibit apomorphine-induced behavioural responses in the same dose range as haloperidol and raclopride (Table 4). This new group of benzamides is suitable for investigations of dopamine D-2 receptors in labelled or unlabelled form.     

Unusual template condensation of benzophenone thiosemicarbazones and salicylaldehydes with nickel(II)

Reactions of 5-R-2-hydroxybenzophenone S-methylthiosemicarbazones (R: H, Br, Cl) and 2-hydroxy-benzaldehydes in the presence of NiCl₂ yielded template complexes by chelating with two of the ligands in the monoanionic form. The N₄O₂ complexes of the thiosemicarbazones show distorted-octahedral geometry around nickel(II). The compounds were characterized by elemental analysis, conductivity and magnetic measurements, UV-Vis, IR, ¹H-NMR, and mass spectra. Crystal structure of bis-N¹-(2-hydroxy-5-bromo-phenyl)(phenyl)methylene-N⁴-(2-hydroxy-phenyl)methylene-S-methyl-thiosemicarbazidato-Ni(II) was determined by single-crystal X-ray diffraction.     

BIS(DITHIOSQUARAMIDE) LIGANDS AND THEIR COMPLEXES WITH DIVALENT NICKEL: THERMOCHROMIC BEHAVIOUR AND UNANTICIPATED FORMATION OF 2:2 SPECIES

Abstract

Reaction of two equivalents of N-mono- or di-substituted 3-amino-4-(n-butoxy)-3-cyclobutene-1,2-diones with a 1,2-diaminoethane gave N-mono- or di-substituted 1,2-bis((2-amino-1-cyclobutene-3,4-dione)amino)-ethane derivatives (bis(squaramides)). Reaction of the bis(squaramides) with excess P₄S₁₀ gave the analogous tetrathio derivatives (bis(dithiosquaramides), LH₂) of formula (NR¹R²)C₄S₂(NHCH₂CH₂NH)-C₄S₂(NR¹R²) (R¹=n-Bu, R²=H; R¹=R²=Et, n-Bu). The new bis(dithiosquaramide) ligands were characterized by elemental analysis, IR, ¹H NMR, ¹³C NMR, electronic, and mass spectroscopic methods. The complexes of these ligands with nickel(II) were prepared, isolated and characterized. The isolated complexes are neutral 2:2 species of formula Ni₂L₂, as evidenced by results from mass spectrometry, and they exhibit thermochromic behaviour in pyridine solution. Additional spectroscopic data (IR, NMR) are consistent with the ligands being coordinated only through sulfur donor atoms and a structure for the complexes is proposed.     

Synthesis of heterocyclic compounds from 2-phenyl-1,2,3-triazole-4-formylhydrazine

2-Phenyl-1, 2, 3-triazole-4-formylhydrazine (2) was prepared by hydrazinolysis of the corresponding ester 1. Reaction of 2 with CS₂/KOH gave the oxadiazole derivatives (3) which via Mannich reaction with different dialkyl amines furnished 3-N, N-dialkyl derivatives (4a–c). Also, condensation of 2 with appropriate aromatic acid in POCI₃ yielded oxadiazole derivatives (5a–c), or with aldehydes and ketones afforded hydrazones (6a–c). Cyclization of (6a–c) with acetic anhydride gave the desired dihydroxadiazole derivatives (7a–c). On the other hand, reaction of dithiocarbazate (8) with hydrazine hydrate gave the corresponding triazole derivative (9) which on treatment with carboxylic acids in refluxing POCI₃ yielded s-triazole [3, 4–b]-1, 3, 4-thiadiazole derivatives (10a–b). The structures of all the above compounds were confirmed by means of IR, ¹H NMR, MS and elemental analysis.     

Synthesis and characterization of tungsten carbonyl complexes containing N-methyl substituted urea and thiourea ligands

Six new mixed-ligand tungsten carbonyl complexes containing N-methyl substituted urea and thiourea of the type W(CO)₄[RCH₂N-(C=X)NH₂] where X?=?O or S and R?=?morpholine, piperidine and diphenylamine are reported. These have been prepared by refluxing hexacarbonyl tungsten(0) with corresponding ligands in THF to produce cis-disubstituted products, [(L-L)W(CO)₄] where L-L?=?a chelating bidentate ligand, morpholinomethyl urea (MMU), morpholinomethyl thiourea (MMTU), piperidinomethyl urea (PMU), piperidinomethyl thiourea (PMTU), diphenylaminomethyl urea (DAMU) and diphenylaminomethyl thiourea (DAMTU). The compounds have been characterized by elemental analysis, IR, electronic and ¹³C NMR spectra, magnetic moments and conductivity measurements. The IR spectra suggests that in all the complexes, the ligands are bidentate chelating, coordinating the metal through carbonyl oxygen or thiocarbonyl sulphur and the ring nitrogen or tert-nitrogen of diphenylamine. The CO force constants and CO–CO interaction constants for these derivatives have also been calculated using Cotton–Kraihanzel secular equations, which indicate poor π-bonding ability of the ligands. ¹³C NMR and electronic spectra reveal loss of cis-carbonyl ligands to produce cis-disubstituted tetracarbonyl derivatives. Molecular modeling studies have been carried out using Hyperchem release 7.52 which suggest a distorted octahedral geometry for these complexes.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

Synthesis and spectroscopic characterization of bis(N-alkyldithiocarbamato)nickel(II) complexes: crystal structures of [Ni(S2CNH(n-Pr))2] and [Ni(S2CNH(i-Pr))2]

Bis(N-alkyldithiocarbamato)nickel(II) complexes (1–5) [Ni(S₂CNHR)₂] (where R?=?Me, Et, n-Pr, i-Pr, n-Bu) were synthesized by the reaction of NiCl₂?·?6H₂O and the corresponding sodium salt of N-alkyldithiocarbamate in 1?:?2 molar ratio in aqueous medium. These bis(N-alkyldithiocarbamato)nickel(II) complexes (1–5) were characterized by elemental analysis, UV-Visible, IR, and ¹H/¹³C-NMR spectroscopy. The crystallographic investigation of [Ni(S₂CNH(n-Pr))₂] (3) and [Ni(S₂CNH(i-Pr))₂] (4) revealed distorted square-planar geometry around nickel(II). The dithiocarbamates have anisobidentate coordination with nickel and the dithiocarbamates are trans.     

Optical properties,structural, and DFT studies of Pd(II) complexes with 1-phenyl-1H-tetrazol-5-thiol,X-ray crystal structure of [Pd(κ1-S-ptt)2(κ2-dppe)] complex

Seven tetrazole-thione complexes, [Pd₂(κ²-ptt)₄]( 1 ), trans-[Pd(k¹-S-ptt)₂(PPh₃)₂] ( 2 ), trans-[Pd(k¹-S-ptt)₂(SPPh₃)₂] ( 3 ), trans-[Pd(k¹-S-ptt)₂(OPPh₃)₂] ( 4 ), [Pd(k¹-N-ptt)₂(k²-dppe)] ( 5a ), [Pd(k¹-S-ptt)₂(k²-dppe)] ( 5b ), [Pd(k¹-S-ptt)₂(k²-dppeS₂)] ( 6 ), and [Pd(k¹-S-ptt)₂(k²-dppeO₂)] ( 7 ), were prepared from 1-phenyl-1H-tetrazole-5-thiol (Hptt), with substituted phosphines. These complexes were investigated by CHNS analysis; infrared (IR), nuclear magnetic resonance (NMR) (¹H and ³¹P), and ultraviolet–visible (UV–Vis) spectroscopy; and single-crystal X-ray data for 5b . In Complex 1 , the ptt⁻ ligand adopted μ²- k-N, k-S bridging mode to afford a dimeric complex, whereas in Complexes 2–4 , 6 , and 7 , the ptt⁻ was covalently coordinated via sulfur atom of the thiol group as a solo product. In contrast, in Complex 5 , the ptt⁻ ligand was bonded in a monodentate fashion through a deprotonated tetrazole ring nitrogen atom in isomer 5a or via a thiolato sulfur atom in isomer 5b . These linkage isomers were clearly shown in the ³¹P-{¹H} NMR. To explain the adoption of the ligand binding modes in Complexes 5a and 5b , geometry optimization calculations were carried out on two isomers. Very small differences of all molecular parameters were found between 5a and 5b isomers. This confirms the reason for obtaining two isomers. Also, theoretical studies are made for all compounds, and excellent agreement is obtained with experimental data. The direct band gap (Eg) values are equal to 2.88, 2.85, and 2.45 eV for Complexes 1 , 2 , and 4 , respectively, revealing a semiconductor nature. The inhibition activity of Complexes 1–3 , 5 , and 8 were evaluated versus the growth of four types of bacteria in vitro. The complexes showed a good activity compared with free ligand and a standard antibiotic.     

Synthesis of nitro,nitroso, azo,and azido derivatives of (4-R<Superscript>1</Superscript>-5-R<Superscript>2</Superscript>-1,2,3-triazol-1-yl)-1,2,5-oxadiazoles by oxidation and diazotization of the corresponding amines

Nitro-, nitroso-, and azo-1,2,5-oxadiazoles with 4-R¹-5-R²-1,2,3-triazol-1-yl substituents were synthesized by oxidation of amino-(1,2,3-triazol-1-yl)-1,2,5-oxadiazoles (aminotriazolylfurazans). Azido-1,2,5-oxadiazole was prepared by diazotization of amino(triazolyl)furazan followed by treatment of the diazonium salt with sodium azide. Depending on the nature of the substituents and the reagent, triazolylfurazans can undergo destruction to give amino-R-furazans (R = NO₂, N₃, aminofurazanylazo), the amino group being formed from the triazole ring. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1859–1865, August, 2005.     

Potential energy surfaces and vibrational spectra for isotopomers of N2O

Potential energy surfaces and vibrational spectra for the four isotopomers (^l5N¹⁴N¹⁶O,^l4N^I5N¹⁶O,¹⁵N₂ ¹⁶O and¹⁵N₂ ¹⁸O) of N₂O have been investigated with the vibrational self-consistent field-configuration interaction method. It is shown that the isotopomers with the same end atom have similar values of the potential parameters, and that substitution with different end atoms can affect the potential obviously. The calculated vibrational levels are in good agreement with the observed values by the optimization of several potential parameters (f ₁ ⁽¹⁾,f ₁₃ ⁽⁰⁾,f ₃ ⁽¹⁾ which are sensitive to isotopic substitutions. Project supported by the National Natural Science Foundation of China (Grant No. 29673029).     

Synthesis and characterization of O,O′-dialkyl and alkylene dithiophosphates of thorium(IV) and their adducts with nitrogen and phosphorus donors

Thorium(IV) tetrakis(dithiophosphates), [Th{S₂P(OR)₂}₄] (where R?=?–CH₂CH₂CH₃ or –C₆H₅) and [Th{S₂PO₂G}₄] [where G?=?–C(CH₃)₂CH₂CH(CH₃)–, –CH₂C(CH₃)₂CH₂–, –C(CH₃)₂C(CH₃)₂– and –CH₂CH₂CH(CH₃)–] were prepared in methanolic solution of Th(NO₃)₄???6H₂O and ammonium dithiophosphates. Adducts of the type [Th{S₂P(OR)₂}₄???nL] and [Th{S₂PO₂G}₄???nL] [where n?=?1, L?=?N₂C₁₀H₈ or N₂C₁₂H₈ and n?=?2, L?=?P(C₆H₅)₃] were prepared by the reaction of thorium(IV) tetrakis(dithiophosphates) and nitrogen or phosphorus donors in benzene. These newly synthesised derivatives have been characterized by elemental analyses, molecular weights, IR, ¹H and ³¹P NMR spectral measurements. Coordination numbers of eight and ten are suggested for thorium(IV) in these derivatives.     

Eight new crystal structures of 5‐(hydroxymethyl)uracil, 5‐carboxyuracil and 5‐carboxy‐2‐thiouracil: insights into the hydrogen‐bonded networks and the predominant conformations of the C5‐bound residues

In order to examine the preferred hydrogen‐bonding pattern of various uracil derivatives, namely 5‐(hydroxymethyl)uracil, 5‐carboxyuracil and 5‐carboxy‐2‐thiouracil, and for a conformational study, crystallization experiments yielded eight different structures: 5‐(hydroxymethyl)uracil, C₅H₆N₂O₃, (I), 5‐carboxyuracil–N,N‐dimethylformamide (1/1), C₅H₄N₂O₄·C₃H₇NO, (II), 5‐carboxyuracil–dimethyl sulfoxide (1/1), C₅H₄N₂O₄·C₂H₆OS, (III), 5‐carboxyuracil–N,N‐dimethylacetamide (1/1), C₅H₄N₂O₄·C₄H₉NO, (IV), 5‐carboxy‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₅H₄N₂O₃S·C₃H₇NO, (V), 5‐carboxy‐2‐thiouracil–dimethyl sulfoxide (1/1), C₅H₄N₂O₃S·C₂H₆OS, (VI), 5‐carboxy‐2‐thiouracil–1,4‐dioxane (2/3), 2C₅H₄N₂O₃S·3C₆H₁₂O₃, (VII), and 5‐carboxy‐2‐thiouracil, C₁₀H₈N₄O₆S₂, (VIII). While the six solvated structures, i.e. (II)–(VII), contain intramolecular S(6) O—H…O hydrogen‐bond motifs between the carboxy and carbonyl groups, the usually favoured R₂²(8) pattern between two carboxy groups is formed in the solvent‐free structure, i.e. (VIII). Further R₂²(8) hydrogen‐bond motifs involving either two N—H…O or two N—H…S hydrogen bonds were observed in three crystal structures, namely (I), (IV) and (VIII). In all eight structures, the residue at the ring 5‐position shows a coplanar arrangement with respect to the pyrimidine ring which is in agreement with a search of the Cambridge Structural Database for six‐membered cyclic compounds containing a carboxy group. The search confirmed that coplanarity between the carboxy group and the cyclic residue is strongly favoured.     

Bis(N-benzyl-N-furfuryldithiocarbamato-S,S′)mercury(II) as a precursor for the preparation of mercury sulfide nanoparticles

Bis(N-benzyl-N-furfuryldithiocarbamato-S,S′)mercury(II), [Hg(bzfdtc)₂] (1) and bis(N,N-difurfuryldithiocarbamato-S,S′)mercury(II), [Hg(dfdtc)₂] (2) were synthesized and characterized by IR, NMR and single-crystal X-ray crystallography. Single-crystal X-ray structures of 1 and 2 indicate that both complexes are dimeric, with each mercury in a distorted [HgS₅] square pyramidal geometry. The thioureide (N¹³CS₂) carbon signals were observed at 206.8 and 206.7 ppm for 1 and 2, respectively, with very weak intensity, characteristic of the quaternary carbon signal. Complex 1 has been used as a precursor for the preparation of HgS nanoparticles. The as-prepared HgS nanoparticles have been characterized by powder XRD, FESEM, EDAX, UV–visible and IR spectroscopies. FESEM images of HgS nanoparticles show that the particles are spherical in shape. The blue shift in the absorption maxima in the UV–visible spectra of HgS1 and HgS2 is a consequence of the quantum confinement effect.     

Electronic Structure Modulation in an Exceptionally Stable Non‐Heme Nitrosyl Iron(II) Spin‐Crossover Complex

The highly stable nitrosyl iron(II) mononuclear complex [Fe(bztpen)(NO)](PF₆)₂ (bztpen=N‐benzyl‐N,N′,N′‐tris(2‐pyridylmethyl)ethylenediamine) displays an S=1/2?S=3/2 spin crossover (SCO) behavior (T_1/2=370 K, ΔH=12.48 kJ mol^?1, ΔS=33 J K^?1 mol^?1) stemming from strong magnetic coupling between the NO radical (S=1/2) and thermally interconverted (S=0?S=2) ferrous spin states. The crystal structure of this robust complex has been investigated in the temperature range 120–420 K affording a detailed picture of how the electronic distribution of the t_2g–e_g orbitals modulates the structure of the {FeNO}⁷ bond, providing valuable magneto–structural and spectroscopic correlations and DFT analysis.     

Recent work on the synthesis of 3,6-dibenzoylcarbazole

By heating carbazole ( 1 ) with aluminum trichloride and benzoyl chloride four benzoylcarbazole derivatives were obtained: N-benzoylcarbazole ( 2 ), 1-benzoylcarbazole ( 3 ), 3-benzoylcarbazole ( 4 ) and 3,6-dibenzoylcarbazole ( 5 ). The complete characterization of benzoylcarbazole derivatives 2–5 was performed by physical and spectroscopical methods (mp, tlc R_f, glc T_r, uv, ir, ¹H nmr, ¹³C nmr and ms).     

SN2’ versus SN2 Reactivity: Control of Regioselectivity in Conversions of Baylis–Hillman Adducts

TiCl₄‐induced Baylis–Hillman reactions of α,β‐unsaturated carbonyl compounds with aldehydes yield the (Z)‐2‐(chloromethyl)vinyl carbonyl compounds 5 , which react with 1,4‐diazabicyclo[2.2.2]octane (DABCO), quinuclidine, and pyridines to give the allylammonium ions 6 . Their combination with less than one equivalent of the potassium salts of stabilized carbanions (e.g. malonate) yields methylene derivatives 8 under kinetically controlled conditions (S_N2’ reactions). When more than one equivalent of the carbanions is used, a second S_N2’ reaction converts 8 into their thermodynamically more stable allyl isomers 9 . The second‐order rate constants for the reactions of 6 with carbanions have been determined photometrically in DMSO. With these rate constants and the previously reported nucleophile‐specific parameters N and s for the stabilized carbanions, the correlation log k (20 °C)=s(N + E) allowed us to calculate the electrophilicity parameters E for the allylammonium ions 6 (?19<E <?18). The kinetic data indicate the S_N2’ reactions to proceed via an addition–elimination mechanism with a rate‐determining addition step.     

Molecular complexes of C60 with tetrasulfur tetranitride

Compounds C₆₀(S₄N₄)_2−x (C₆H₆) _x (1a-d) withx=0.67 (a), 1.0 (b), 1.1 (c), and 1.2 (d), in which isomorphous replacement of S₄N₄ with benzene takes place, were obtained by the reaction of fullerence C₆₀ with tetrasulfur tetranitride in benzene. Complexes C₆₀·S₄N₄ (2) and C₆₀(S₄N₄)₂ (3) containing no solvent were isolated from toluene. The compositions of the compounds were established by elemental and thermogravimetric analyses. The data of IR and X-ray photoelectron (XP) spectroscopies show that in the complexes studied the transfer of electron density occurs mainly from the nitrogen atoms of S₄N₄. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 37–40. January 1977.