Poly(MAA-Mn) for Triple-Layer Structure Synthesis of ZnS/ZnS:Mn/SiO2 Phosphors

Methacrylic acid (MAA) was used as a manganese carrier to prepare ZnS/MAA-Mn particles, and ZnS/ZnS:Mn phosphors were formed from ZnS/MAA-Mn by ion substitution through heat treatment. After silica coating on surface by chemical precipitation method with tetraethyl orthosilicate (TEOS), ZnS/ZnS:Mn/SiO₂ phosphors were prepared successfully as a new core/shell structure compound. The thickness of layers was controlled by adjusting concentrations of manganese (II) acetate (Mn(CH₃COO)₂) and TEOS. Structure, morphology, and composition of prepared phosphors were investigated by X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS), respectively. Photoluminescence (PL) properties of ZnS with different Mn²⁺ content were analyzed by PL spectrometer. PL emission intensity and PL stability were analyzed for evaluating effects of silica coating and Mn²⁺ activator doping. As a result, the structure of two layers could be observed, and optimum composition of ZnS/ZnS:Mn/SiO₂ structure was also obtained.     

ZnS:Mn2+/聚苯乙烯核壳及ZnS:Mn2+中空球的制备和光谱性质

ZnS:Mn2+ polystyrene (PS) core-shell structures and ZnS:Mn2+ hollow spheres were prepared by a sonoehemical deposition approach. Transmission electron micrograph (TEM) studies show that the PS surface is covered by a thin shell consisted of ZnS: Mn2+ nanoparticles with an average size of 9 nm. ZnS: Mn2+ hollow spheres were obtained by heating the core-shell particles in air at 500 ℃ to drive off PS. The photoluminescence spectrum for the emission band of Mn2+ peaked at 540 nm, and a 45 nm blue shift compared to that of corresponding bulk sample, was discussed based on the Mn-O octahedral distortion induced by shell structure.     

Synthesis and characterization of the water-soluble silica-coated ZnS:Mn nanoparticles as fluorescent sensor for Cu ions

Silica-coated ZnS:Mn nanoparticles were synthesized by coating hydrophobic ZnS:Mn nanoparticles with silica shell through microemulsion. The core–shell structural nanoparticles were confirmed by X-ray diffraction (XRD) patterns, high-resolution transmission electron microscope (HRTEM) images and energy dispersive spectroscopy (EDS) measurements. Results show that each core–shell nanoparticle contains single ZnS:Mn nanoparticle within monodisperse silica nanospheres (40 nm). Photoluminescence (PL) spectroscopy and UV–vis spectrum were used to investigate the optical properties of the nanoparticles. Compared to uncoated ZnS:Mn nanoparticles, the silica-coated ZnS:Mn nanoparticles have the improved PL intensity as well as good photostability. The obtained silica-coated ZnS:Mn nanoparticles are water-soluble and have fluorescence sensitivity to Cu²⁺ ions. Quenching of fluorescence intensity of the silica-coated nanoparticles allows the detection of Cu²⁺ concentrations as low as 7.3 × 10⁻⁹ mol L⁻¹, thus affording a very sensitive detection system for this chemical species. The possible quenching mechanism is discussed.     

Synthesis of ligand-selective ZnS nanocrystals exhibiting ligand-tunable fluorescence

High-quality ZnS nanocrystals (NCs) of nearly identical size are synthesized using isomeric ligands, o-, m-, p-phenylenediamines (PDAs) that bind to the NC cores. The fluorescence emission from the NC is tunable according to the structure of the isomer. The measured fluorescence quantum yields (QYs) are 2-3 times higher for NCs that are passivated with isomeric PDA ligands than the fluorescence QY of NCs prepared at the absence of PDAs. The NC morphologies were studied by low-angle and wide-angle X-ray diffraction (XRD), and by transmission electron microscopy (TEM). The average correlating sizes were found to be 3.0+/-0.3, 3.7+/-0.30, and 3.0+/-0.5 nm for the NCs that were passivated with o-PDA, m-PDA, and p-PDA, respectively. The Fourier-transform infra-red (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) studies were carried out to investigate the shell structure and the interaction between the core and the shell. The adsorbed ligands were quantitatively analyzed by TGA. The structure, morphology, and optical properties of these PDA passivated NCs were compared with the NCs prepared in the absence of PDA.     

CdS:Mn nanocrystals passivated by ZnS: synthesis and luminescent properties

Synthesis and characterization of highly luminescent ZnS-passivated CdS:Mn (CdS:Mn/ZnS) core/shell structured nanocrystals are reported. Mn-doped CdS core nanocrystals are produced ranging from 1.5 to 2.3 nm in diameter with epitaxial ZnS shell of wider band gap via a reverse micelle process. UV irradiation-stimulated photo-oxidation of the ZnS shell results in formation of sulfate (ZnSO(4)) as determined by x-ray photoelectron spectroscopy, which increases the photoluminescence emission intensity and subsequent photostability. Luminescent relaxation lifetime data present two different decay components, consisting of slow decay emission from the Mn center and a fast decay emission from a defect-related center. The impact of the density of surface defect states upon the emission spectra is discussed.     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Water-soluble silica-overcoated CdS:Mn/ZnS semiconductor quantum dots

Highly luminescent and photostable CdS:Mn/ZnS core/shell quantum dots are not water soluble because of their hydrophobicity. To create water-soluble quantum dots by an appropriate surface functionalization, CdS:Mn/ZnS quantum dots synthesized in a water-in-oil (W/O) microemulsion system (reverse micelles) were consecutively overcoated with a very thin silica layer ( approximately 2.5 nm thick) within the same reverse micellar system. The water droplet serves as a nanosized reactor for the controlled hydrolysis and condensation of a silica precursor, tetraethyl orthosilicate (TEOS), using an ammonium hydroxide (NH4OH) catalyst. Structural characterizations with transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS) indicate that the silica-quantum dot nanocomposites consist of a layered structure. Owing to the amorphous, porous nature of a silica layer, the optical and photophysical properties of silica-overcoated CdS:Mn/ZnS quantum dots are found to remain close to those of uncoated counterparts.     

利用SnO2:Sb干凝胶部分升华产物处理ZnS:Mn荧光粉

以SnCl2•2H2O、SbCl3为原料, 通过溶胶-凝胶法制备SnO2:Sb干凝胶. 利用干凝胶氧化过程中的部分升华产物对新制的ZnS:Mn荧光粉进行了表面处理. 在固定氧气流量和氧化时间的条件下, 考察了SnO2:Sb干凝胶与ZnS:Mn荧光粉的质量比和氧化温度对处理后荧光粉电阻率的影响. 当干凝胶粉与荧光粉的质量比为3.0, 氧化温度为500 ℃处理后荧光粉的电阻率明显下降. 对处理后的荧光粉进行了室温光致荧光(PL)光谱、X射线衍射(XRD)以及透射电镜(TEM)分析. 结果表明对荧光粉进行表面处理没有改变荧光粉的光致发光性质和晶体结构.     

Mn:ZnSe/ZnS核-壳结构纳米晶的无膦法制备和光学性质

以溶于十八烯的Se作为Se前驱体,在无膦条件下制备得到了具有较高量子产率的Mn:ZnSe纳米晶.为了进一步提高纳米晶的稳定性和发光强度,运用外延生长的方法进行ZnS壳层包覆并得到了具有核-壳结构的Mn:ZnSe/ZnS纳米晶.X射线衍射、透射电子显微镜及吸收和荧光光谱测试结果表明,该方法合成的Mn:ZnSe纳米晶以及核-壳结构Mn:ZnSe/ZnS纳米晶均为闪锌矿结构,具有良好的单分散性,包覆ZnS外壳层后量子产率可达到60%以上.此外,对ZnS壳层厚度和Mn2+的掺杂量对Mn:ZnSe/ZnS纳米晶发光强度的影响及发光机制也进行了初步讨论.     

Facile synthesis of ZnS-CuInS2-alloyed nanocrystals for a color-tunable fluorchrome and photocatalyst

High-quality ZnS-CuInS(2) (ZCIS) alloy nanocrystals have been synthesized via reaction between the acetate salts of the corresponding metals and elemental sulfur in the presence of dodecanethiol in octadecene media at 230 °C. The PL emission wavelength can be tuned conveniently via variation of the stoichiometric ratio of their components. The influence of various experimental variables, including Zn/CuIn ratio, amount of sulfur and dodecanethiol, and reaction temperature, on the optical properties and composition of the obtained ZCIS NCs have been systematically investigated. The plain ZCIS NCs did show PL emission but with quite low PL quantum yield (typically below 3%). In order to improve the PL emission efficiency, the ZnS shell was subsequently overcoated around the ZCIS core NCs. With ZnS shell growth, the PL emission wavelength of the resulting ZCIS/ZnS NCs can cover from 518 to 810 nm with the maximum PL quantum efficiency up to 56%. Furthermore, the obtained ZCIS/ZnS NCs show promising photocatalytic activity in the degradation of rhodamine B.     

Facile synthesis of highly luminescent Mn-doped ZnS nanocrystals

Manganese-doped zinc sulfide quantum dots (Mn:ZnS d-dots) with high optical quality, pure dopant emission of 55-65% photoluminescence quantum yield, were synthesized in octadecene media with generic starting materials, namely, zinc (manganese) carboxylic acid salts, S powder, and dodecanethiol (DDT) based on a "nucleation doping" strategy. The optical properties and structure of the obtained Mn:ZnS d-dots have been characterized by UV-vis, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The resulting nearly monodisperse d-dots were found to be of spherical shape with a zinc-blende crystal structure. The influences of various experimental variables, including the reaction temperature for the MnS core nanocluster and ZnS host material, the amount of octadecene (ODE)-S, DDT, as well as Zn/Mn ratio have been systematically investigated. The use of DDT as capping ligand ensured the reproducible access to a stable small-sized MnS core. This paves the way for reproducibly obtaining highly luminescent d-dots. Programmed overcoating temperature for growth of ZnS shell was employed to realize balanced diffusion of the Mn ions in the d-dots.     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

Synthesis and Optical Properties of Mn2+-Doped ZnS Nanoparticles in Solutions and Coatings

Mn2+-doped ZnS nanoparticles with different Mn-doping concentrations stabilized by hydroxypropyl cellulose (HPC) have been synthesized in ethanolic solutions and coatings. Their optical and structural properties have been characterized by means of UV-vis spectroscopy, luminescence spectroscopy, high resolution transmission electron microscopy (HRTEM) and small angle X-ray scattering (SAXS). Solutions and coatings exhibit a strong luminescence at 590 nm when excited with UV light showing that Mn2+ is incorporated into the ZnS nanoparticles. The highest luminescence intensity is obtained with an Mn2+ concentration of 2 mol%. HRTEM and SAXS investigations show that the particles are crystalline and are 3 ± 0.5 nm in size. Irradiation of the coatings with UV light leads to a photochemical oxidation of the particles, as shown by the decreasing absorption of the coating with irradiation time and a blue shift of the absorption maximum. Furthermore, the luminescence intensity first strongly increases and then decreases completely with UV-irradiation time. Both phenomena can be explained by the photochemical oxidation of the particles.     

水热法合成AgInS2/ZnS核/壳结构量子点及其荧光性能

以硫脲为硫源,采用谷胱甘肽(GSH)和柠檬酸钠(SC)为配体,通过水热法制备了水溶性AgInS2/ZnS(AIS/ZnS)核/壳结构量子点。系统研究了反应温度和配体用量对量子点的合成及其荧光性能的影响。采用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)和光致发光光谱(PL)分别对量子点的物相、形貌和光学性能进行了表征,并考察了量子点的稳定性。实验结果表明,随着反应温度从70℃升高至90℃,促进了ZnS壳层的形成,有效地钝化了量子点的表面缺陷,获得的AIS/ZnS核/壳量子点的发光强度显著提高,发光峰位从600 nm蓝移至580 nm。配体的添加可以有效地平衡Zn^2+的化学反应活性,减缓ZnS壳层的生长,抑制核壳界面缺陷的形成,还能消除量子点的表面态,当nGSH/nZn^2+=2.0,nSC/nZn^2+=2.5时,AIS/ZnS量子点的荧光性能最佳。此外,AIS/ZnS核/壳结构量子点还具有优异的光学稳定性。     

核壳结构CdS/ZnS纳米微粒的制备与光学特性

CdS and CdS/ZnS core-shell structure nano particles were synthesized in micro emulsion, and characterized by X-ray diffraction(XRD), transmission electron microscopy (TEM), UV absorption spectra and PL. The average diameter of CdS was about 3.3 nm, and CdS/ZnS core-shell structure was confirmed by XRD and UV. Considering the optical properties of CdS/ZnS core-shell structure nanoparticles which have different ZnS shell thickness, the UV absorption edge of CdS/ZnS becomes as lightred-shift with the thickness of ZnS layer increasing, and the absorption of shortwave band is strongly enhanced at the same time. The PL spectra indicate that ZnS shell layer can greatly eliminate surface defects of CdS nanoparticles and make its band-edge directed recombination increased, and the luminous efficiency of CdS is improved greatly when it has appropriate shell thickness.     

Hybrid approach to the synthesis of highly luminescent CdTe/ZnS and CdHgTe/ZnS nanocrystals

We report the synthesis of highly luminescent CdTe/ZnS and CdHgTe/ZnS core/shell semiconductor nanocrystals (NCs). A hybrid of two synthesis routes leads to novel nanocrystal compositions and small core/shell sizes (4-5 nm) that emit in the far-red and near-infrared regions. These particles exhibit higher resistance to oxidation and photobleaching, have high quantum yields, and could be used for biological labeling and imaging.     

One-pot noninjection synthesis of Cu-doped Zn(x)Cd(1-x)S nanocrystals with emission color tunable over entire visible spectrum

Unlike Mn doped quantum dots (d-dots), the emission color of Cu dopant in Cu d-dots is dependent on the nature, size, and composition of host nanocrystals (NCs). The tunable Cu dopant emission has been achieved via tuning the particle size of host NCs in previous reports. In this paper, for the first time we doped Cu impurity in Zn(x)Cd(1-x)S alloyed NCs and tuned the dopant emission in the whole visible spectrum via variation of the stoichiometric ratio of Zn/Cd precursors in the host Zn(x)Cd(1-x)S alloyed NCs. A facile noninjection and low cost approach for the synthesis of Cu:Zn(x)Cd(1-x)S d-dots was reported. The optical properties and structure of the obtained Cu:Zn(x)Cd(1-x)S d-dots have been characterized by UV-vis spectroscopy, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The influences of various experimental variables, including Zn/Cd ratio, reaction temperature, and Cu dopant concentration, on the optical properties of Cu dopant emission have been systematically investigated. The as-prepared Cu:Zn(x)Cd(1-x)S d-dots did show PL emission but with quite low quantum yield (QY) (typically below 6%). With the deposition of ZnS shell around the Cu:Zn(x)Cd(1-x)S core NCs, the PL QY increased substantially with a maximum value of 65%. More importantly, the high PL QY can be preserved when the initial oil-soluble d-dots were transferred into aqueous media via ligand replacement by mercaptoundeconic acid. In addition, these d-dots have thermal stability up to 250 °C.     

Effect of nanoscaled SnO2 coating on ZnS:Mn phosphors under electron irradiation

The luminescence properties of SnO₂-coated ZnS:Mn phosphors are investigated. In the case of photoluminescence, emission intensities show little change when SnO₂ is coated on the surface of ZnS:Mn, while in the case of cathodoluminescence (CL), emission intensities vary depending on excitation energies. In order to determine the luminescence behaviors, surface analyses of the phosphors were performed. Auger electron spectroscopy showed that the width of the SnO₂ layer on the ZnS:Mn phosphor was saturated at approximately 120 nm. Also, X-ray photoelectron spectroscopy indicated that the SnO₂ layers are well formed and saturated when the molar ratios of Sn/Zn are larger than 0.005. These results suggest that the changes in the CL emissions can be attributed to a lowering of the junction barrier.     

磁性荧光双功能复合纳米粒子Fe3O4@SiO2@ZrO2:Tb3+的合成和表征

通过原位反应合成法成功合成了一种新型水溶性的磁性荧光复合纳米粒子Fe₃O₄@SiO₂@ZrO₂:Tb³⁺,并通过扫描电子显微镜(SEM)、X射线粉末衍射仪(XRD)、红外光谱仪(FT-IR)、磁性测试仪和荧光(PL)光谱对其形貌、尺寸、相组成、磁性和荧光性能进行了表征。 结果表明,核(Fe₃O₄@SiO₂)壳(ZrO₂:Tb³⁺)结构组成的磁性荧光复合纳米粒子具有超顺磁性,其饱和磁化强度达到36 emu/g,并且在494 nm(⁵D₄→⁷F₆)、549 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄)和625 nm(⁵D₄→⁷F₃)处具有4个Tb³⁺特有的荧光发射光谱带峰值。 磁性荧光双功能的复合纳米粒子在生物医学领域具有潜在的应用价值。