An improved method of characterizing fatty acids by equivalent chain length values

A method has been developed for calculating more accurate and reproducible equivalent chain length (ECL) values of 33 straight-chain fatty acids (FA), with various positions and numbers of cis double bonds, chromatographed on DB-Wax and DB-1 columns. The dependence of ECL values on the position and the number of double bonds is described, as is a method of utilizing these relationships for the characterization of FA by gas chromatography.     

Characterizing ion mobility and collision cross section of fatty acids using electrospray ion mobility mass spectrometry

This study investigated the ion mobility (IM) and the collision cross section (CCS) of fatty acids (FAs) using electrospray IM MS. The IM analysis of 18 FA ions showed intriguing differences among the saturated FAs, monounsaturated FAs, multi‐unsaturated FAs, and cis‐isomer/trans‐isomer with respect to the aliphatic tail chains. The length of aliphatic tail chain present in the ion structures had a strong influence on the differentiation of drift, while the number of double bond showed a weaker influence. The tiny drift differences between cis‐isomer and trans‐isomer were also observed. In the CCS measurements, two internal standards were involved in the mobility calibration and accuracy estimation. It insured our empirical CCS values were of high experimental precision (±0.35% or better) and accuracy (±0.25% or better). Moreover, the mass‐to‐charge ratio (m/z) – mobility plots obtained by ion mobility spectrometry with mass spectrometry analysis of FAs – was used to investigate the structural relationship between the molecules. Each series of FAs sharing a similar structure was aligned in the linear plot. Finally, the developed procedure was applied to the determination of FAs in rat adipose tissues, and it allowed the presence of 13 FAs to be confirmed with their exact masses and CCS values. These studies reveal the direct relationship between the behaviors in IM and the molecular structures and thus may provide further validations to the FA identification process. Copyright © 2015 John Wiley & Sons, Ltd.     

Cytotoxic activity of alkyl benzoate and fatty acids from the red sea sponge Hyrtios erectus

The chemical investigation of the methylene chloride fraction of marine sponge Hyrtios erectus led to the isolation of the known oxysterol (2) along with a new alkyl benzoate compound identified by spectroscopic methods (NMR and MS) as 4′-methylheptyl benzoate (1), whilst the n-butanol fraction afforded the known indole 3-carbaldehyde and β-carboline derivatives. Moreover, the hexane fraction was analysed by GC–MS for their fatty acids (FAs). A total of 17 FAs with chain lengths between 14 and 25 carbons were identified. Methyl-branched FAs are predominated suggesting the presence of bacterial symbionts in the H. erectus sponge. Furthermore, compounds 1 and 2 displayed significant cytotoxicity against breast adenocarcinoma (MCF-7) with IC₅₀ values of 2.4 and 3.8 μM, respectively, since compound 2 was also shown to have potent cytotoxic effect against hepatocellular carcinoma cells (HepG 2) with IC₅₀ value of 1.3 μM.     

Photophysical Properties and Efficient,Stable, Electrogenerated Chemiluminescence of Donor–Acceptor Molecules Exhibiting Thermal Spin Upconversion

The photophysical properties and electrogenerated chemiluminescence (ECL) of three donor–acceptor molecules composed of dicyanobenzene and methyl‐, tert‐butyl‐, and phenyl‐substituted carbazolyl groups, 1,2,3,5‐tetrakis(3,6‐disubstituted‐carbazol‐9‐yl)‐4,6‐dicyanobenzene (4CzIPN‐Me, 4CzIPN‐tBu, and 4CzIPN‐Ph, respectively) are described. These molecules show delayed fluorescence as a result of thermal spin upconversion from the lowest triplet state to the lowest singlet state at room temperature. The three molecules showed yellow to yellowish–red ECL. Remarkably, the ECL efficiencies of 4CzIPN‐tBu in dichloromethane reached almost 40 %. Moreover, stable ECL was emitted from 4CzIPN‐tBu and 4CzIPN‐Ph. In case of 4CzIPN‐Me, the ECL intensity decreased during voltage cycles because of polymerization. Quantum chemical calculations revealed that polymerization was inhibited by the steric hindrance of the bulky tert‐butyl and phenyl groups on the carbazolyl moieties and lowered the spin density on the carbazolyl groups through electron conjugation for 4CzIPN‐Ph.     

Inhibition of Ru Complex Electrochemiluminescence by Phenols and Anilines

The effect of 30 phenols and anilines on typical Ru complex electrochemiluminescence (ECL) was systematically investigated under different conditions. It was found that all the tested compounds showed an ECL inhibiting signal. The magnitude of ECL inhibition was related to the position of the substituting group in the benzene ring and decreased in the following order: meta‐>ortho‐>para‐. The oxidation potential of the tested compounds, the ECL spectra and UV‐visible absorption spectra of Ru(bpy) /tripropylamine (TPrA) in the presence of phenols and anilines, and the direct ECL between Ru(bpy) and phenols/aniline were studied. The mechanism of ECL inhibition has been proposed due to energy transfer from the excited state Ru(bpy) to a quinone or ketone or their polymer formed by electro‐oxidation of phenols and anilines. The potential of analytical application was explored by use of the inhibited ECL. The results demonstrate that numerous compounds are detectable with the detection limits in the range of 10^?8–10^?9 mol/L for Ru(bpy) /TPrA system and in the range of 10^?6–10^?7 mol/L for Ru(bpy) /C₂O system, respectively.     

Investigation of DNA Pesticide Interactions by Sensitive Electrochemiluminescence Method

A solid-state [Ru(bpy)₂(dppz)]²⁺ (bpy = 2,2′-bipyridine, dppz = dipyrido[3,2-a: 2′,3′-c]phenazine) electrochemiluminescence (ECL) biosensor for studying the binding interactions between pesticides of heterocyclic polycyclic aromatic hydrocarbon (heteroPAH) and natural double-stranded DNA (ds-DNA) was constructed. Layer-by-layer films of negatively charged natural ds-DNA and polycationic poly (diallyldimethylammonium chloride) (PDDA) were assembled on the surface of a glassy carbon electrode (GCE). The complex of [Ru(bpy)₂(dppz)]²⁺ was used as a probe. Tripropylamine (TPA) was used as an electron donor to chemically amplify the ECL intensity of the probe. If the xenobiotic molecules compete with the probe for the same site on the DNA film, it would displace the probe from the DNA to decrease the ECL signal. The interactions of DNA with three pesticide molecules, quinalphos, quinclorac and carbendazim, were studied. From the displacement curve, the values of binding constant K _b of three pesticides to DNA is determined, which is in the range of 0.5 × 10⁴ to 2.3 × 10⁴ M^?1.     

Identification of regioisomers and enantiomers of triacylglycerols in different yeasts using reversed‐ and chiral‐phase LC–MS

LC with atmospheric pressure chemical ionization (ACPI) MS with RP and chiral phase was used for separation of triacylglycerols (TAGs) from yeasts of the genera Candida, Kluyveromyces, Rhodotorula, Saccharomyces, Torulospora, Trichosporon, and Yarrowia. Chiral LC–APCI‐MS is based on using two columns in series packed with a 3,5‐dimethylphenyl carbamate modified β‐cyclodextrin chiral phase. All regioisomers and enantiomers of TAGs containing one to five double bonds were separated. Molecular species of TAGs, i.e. regioisomers and enantiomers, were identified and quantified by MS/MS. Among the 94 identified TAGs, the most abundant were triolein, oleopalmitoleoolein, and dipalmitoleoolein. In strains producing palmitoleic acid in amounts >25% of total fatty acids (FAs), this acid, or unsaturated FA is bound in sn‐1. In strains containing palmitoleic acid at 10–25% total FAs this acid is mainly bound in sn‐3, saturated FA being bound in sn‐1. Strains containing <10% palmitoleic acid form preferentially symmetrical TAGs.     

Complete separation of the geometical isomers of linolenic acid by high performance liquid chromatography with a silver ion column

A method has been developed for separation of linolenic acid and its seven isomers by HPLC on a silver-ion-loaded column. The standard 18:3 isomers, isolated from a heated linseed oil or prepared by isomerization of linolenic acid, were converted into phenacyl esters and detected by UV at 238 nm. The use of low temperature (10 °C) combined with a gradient of dichloromethane and methanol enabled separation of all the cis/trans isomers. The peaks were identified by comparison of ECL values with those of a standard mixture, by chromatographing collected HPLC fractions on a polar GC column. HPLC quantification was compared with GC analysis. There was satisfactory agreement between the tow methods. This method could be used for seperation, collection and quantification of 18:3 fatty acids with trans double bonds in different oils and foods.     

Dual Enhancement of Gold Nanocluster Electrochemiluminescence: Electrocatalytic Excitation and Aggregation-Induced Emission

Ligand-protected gold nanoclusters (AuNCs) have emerged as a new class of electrochemiluminescence (ECL) luminophores for their interesting catalytic and emission properties, although their quantum yield (Φ_ECL) in aqueous medium is low with a poor mechanistic understanding of the ECL process. Now it is shown that drying AuNCs on electrodes enabled both enhanced electrochemical excitation by an electrocatalytic effect, and enhanced emission by aggregation-induced ECL (AIECL) for 6-aza-2-thiothymine (ATT) protected AuNCs with triethylamine (TEA) as a coreactant. The dried ATT-AuNCs/TEA system resulted in highly stable visual ECL with a Φ_ECL of 78 %, and a similar enhancement was also achieved with methionine-capped AuNCs. The drying enabled dual-enhancement mechanism has solved a challenging mechanistic problem for AuNC ECL probes, and can guide further rational design of ECL emitters.     

Electrogenerated Chemiluminescence of Lucigenin in Ethanol Solution at a Polycrystalline Gold Electrode

The electrogenerated chemiluminescence (ECL) behavior of lucigenin in ethanol solution at a polycrystalline gold electrode was studied under conventional cyclic voltammetric conditions. Compared with the ECL of lucigenin in aqueous solution, one cathodic ECL peak (ECL‐1 at ?0.98 V versus SCE) with a shoulder (S₁ at ?0.42 V) and three new anodic ECL peaks (ECL‐2 at ?0.53 V, ECL‐3 at 0.20 V, and ECL‐4 at 0.51 V) were observed, respectively, on the curve of ECL intensity versus potential. The effects of initial potential scan direction, the presence of O₂ or N₂, potential scan ranges, supporting electrolyte and the concentration of lucigenin on these ECL peaks were examined. The electrochemistry of lucigenin in ethanol solution was also studied. The emitter of all ECL peaks was identified as N‐methylacridone (NMA) by analyzing the ECL spectra. The mechanism for these ECL peaks is proposed to be due to the reactions of lucigenin and its redox products such as Luc and DBA with dissolved oxygen or O₂ electrogenerated by the dissolved oxygen at different potentials. The formation of new anodic ECL peaks in ethanol solution is due to longer lifetime of superoxide ions and easier electro‐oxidation of DBA in nonaqueous solution, revealing that the solvent plays an important role in the lucigenin ECL reactions.     

Electochemiluminescence of CdTe/CdS Quantum Dots with Triproprylamine as Coreactant in Aqueous Solution at a Lower Potential and Its Application for Highly Sensitive and Selective Detection of Cu2+

Anodic electrochemiluminescence (ECL) of 3‐mercaptopropionic acid (MPA)‐ capped CdTe/CdS core‐shell quantum dots (QDs) with tripropylamine (TPrA) as the co‐reactant were studied in aqueous (Tris buffer) solution for the first time. The results suggest that the oxidation of TPrA at a glassy carbon electrode (GCE) surface participated in the ECL of QDs, and the onset potential and the intensity of ECL of CdTe/CdS QDs were affected seriously by TPrA, as the co‐reactant, in Tris buffer solution. The onset potential of ECL in this new system was about +0.5 V (vs. Ag/AgCl) and the ECL intensity greatly enhanced when TPrA was present. Various influencing factors, such as the electrolyte, pH, QDs concentration, potential range and scan rates on the ECL were studied. Based on the selective quenching by Cu²⁺ to the light emission from CdTe/CdS QDs/TPrA system, a highly sensitive and selective method for the determination of Cu²⁺ was developed. At the optimal conditions, the relative ECL intensity, I₀/I, was proportional to the concentration of Cu²⁺ from 14 nM to 0.21 μM with the detection limit of 6.1 nM based on the signal‐to‐noise ratio of 3. The possible ECL mechanism of QDs and the quenching mechanism of ECL were proposed.     

Determination of β-blockers in pharmaceutical preparations and human urine by high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly selective and sensitive detection method based on tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] electrogenerated chemiluminescence (ECL) has been developed for the quantitative determination of β-blockers in both pharmaceutical preparations and human urine samples. The ECL emission is based on the reaction between electro-oxidized Ru(bpy)₃³⁺ and the secondary amino groups on the β-blockers. The ECL intensities for the β-blockers were strongly dependent on the pH at which the ECL detections were conducted, with the maximum intensities being obtained at pH 9.0. Under the optimal condition, the detection limit for atenolol and metoprolol were almost 0.5 μM (50 pmol) and 0.08 μM (8 pmol), respectively, with S/N of 3 and a linear working range that extends four orders of magnitude with relative standard deviations below 5% for 10 replicate injected samples. The concentrations of atenolol and metoprolol were determined in pharmaceutical preparations using flow injection analysis with Ru(bpy)₃²⁺ ECL detection based on standard addition method. The determined values by the present method showed acceptable agreement with the stated values by manufacturers. The determination of the five β-blockers in human urine samples was performed using HPLC-Ru(bpy)₃²⁺ ECL detection. The resulting chromatogram was much simpler than that obtained with HPLC-UV absorbance detection.     

Dual Enhancement of Gold Nanocluster Electrochemiluminescence: Electrocatalytic Excitation and Aggregation‐Induced Emission

Ligand‐protected gold nanoclusters (AuNCs) have emerged as a new class of electrochemiluminescence (ECL) luminophores for their interesting catalytic and emission properties, although their quantum yield (Φ_ECL) in aqueous medium is low with a poor mechanistic understanding of the ECL process. Now it is shown that drying AuNCs on electrodes enabled both enhanced electrochemical excitation by an electrocatalytic effect, and enhanced emission by aggregation‐induced ECL (AIECL) for 6‐aza‐2‐thiothymine (ATT) protected AuNCs with triethylamine (TEA) as a coreactant. The dried ATT‐AuNCs/TEA system resulted in highly stable visual ECL with a Φ_ECL of 78 %, and a similar enhancement was also achieved with methionine‐capped AuNCs. The drying enabled dual‐enhancement mechanism has solved a challenging mechanistic problem for AuNC ECL probes, and can guide further rational design of ECL emitters.     

Electrochemiluminescence Waveguide in Single Crystalline Molecular Wires

Here we report the first observation of active waveguide of electrochemiluminescence (ECL) in single crystalline molecular wires self‐assembled from cyclometalated iridium(III) complexes, namely tris(1‐phenylisoquinoline‐C², N) (Ir(piq)₃). Under dark conditions, the molecular wires deposited on the electrode surface can act as both ECL emitters and active waveguides. As revealed by ECL microscopy, they exhibit the typical characteristics of optical waveguides, transmitting ECL and generating much brighter ECL emission at their terminals. Moreover, self‐generated ECL can be confined inside the molecular wire and propagates along the longitudinal direction as far as ≈100 μm to the terminal out of touch with the electrode. Therefore, this one‐dimensional crystalline molecular wire‐based waveguide offers the opportunity to switch the electrochemically generated ECL to remote light emission in non‐conductive regions and is promising for contactless electrochemical analysis and study of (bio)chemical systems.     

Ultrasensitive and Signal‐on Electrochemiluminescence Aptasensor Using the Multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin Complexes

An ultrasensitive and signal‐on electrochemiluminescence (ECL) aptasensor to detect target protein (thrombin or lysozyme) was developed using the host‐guest recognition between a metallocyclodextrin complex and single‐stranded DNA (ss‐DNA). The aptasensor uses both the photoactive properties of the metallocyclodextrins named multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin complexes and their specific recognition with ss‐DNA, which amplified the ECL signal without luminophore labeling. After investigating the ECL performance of different multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin (multi‐Ru‐β‐CD) complexes, tris‐tris(bipyridine)‐ruthenium(II)‐β‐cyclodextrin (tris(bpyRu)‐β‐CD) was selected as a suitable host molecule to construct an atasensor. First, double‐stranded DNA (ds‐DNA) formed by hybridization of the aptamer and its target DNA was attached to a glassy carbon electrode via coupling interaction, which showed low ECL intensity with 2‐(dibutylamino) ethanol (DBAE) as coreactant, because of the weak recognition between ds‐DNA and tris(bpyRu)‐β‐CD. Upon addition of the corresponding protein, the ECL intensity increased when target ss‐DNA was released because of the higher stability of the aptamer‐protein complex than the aptamer‐DNA one. A linear relationship was observed in the range of 0.01 pmol/L to 100 pmol/L between ECL intensity and the logarithm of thrombin concentrations with a limited detection of 8.5 fmol/L (S/N=3). Meanwhile, the measured concentration of lysozyme was from 0.05 pmol/L to 500 pmol/L and the detection limit was 33 fmol/L (S/N=3). The investigations of proteins in human serum samples were also performed to demonstrate the validity of detection in real clinical samples. The simplicity, high sensitivity and specificity of this aptasensor show great promise for practical applications in protein monitoring and disease diagnosis.     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

苯酚和苯胺类化合物对鲁米诺电致化学发光的增强和抑制作用

系统研究了不同pH下的NaHCO₃-Na₂CO₃和NaOH缓冲介质中, 36种苯酚和苯胺类化合物对鲁米诺电致化学发光(Electrochemiluminescence, ECL)体系的影响. 发现苯酚和苯胺类化合物的抑制和增强作用与化合物的结构、氧化电位和介质的pH有直接的关系: 具有较高氧化电位的苯酚和苯胺类化合物对鲁米诺的ECL没有影响; 而具有较低的氧化电位、苯环上有两个处于对位的-OH(或-NH₂)或苯环上有多个相邻的-OH的化合物, 在较低的pH下有增强作用, 在较高的pH下具有抑制作用; 其它的化合物则呈现抑制作用, 抑制作用的大小与化合物的结构有关. 通过研究化合物的氧化半峰电位、ECL光谱、荧光光谱等, 提出了增强和抑制作用的可能机理: 各种有机物的电氧化产物如醌、酮及具有醌、酮结构的聚合物等能够淬灭激发态3-氨基邻苯二甲酸根阴离子(3-AP^2－*)的发射, 导致了鲁米诺的ECL的降低; 同时, 反应过程中生成的半醌自由基中间体或 会促进鲁米诺的发光反应, 呈现增强作用.     

Quenching Behavior of the Electrochemiluminescence of Ru(bpy)32+/TPrA System by Phenols on a Smartphone-Based Sensor

Phenolic compounds such as vanillic and p-coumaric acids are pollutants of major concern in the agro-industrial processing, thereby their effective detection in the industrial environment is essential to reduce exposure. Herein, we present the quenching effect of these compounds on the electrochemiluminescence (ECL) of the Ru(bpy)₃²⁺/TPrA (TPrA=tri-n-propylamine) system at a disposable screen-printed carbon electrode. Transient ECL profiles are obtained from multiple video frames following 1.2 V application by a smartphone-based ECL sensor. A wide range of detection was achieved using the sensor with limit of detection of 0.26 μM and 0.68 μM for vanillic and p-coumaric acids, respectively. The estimated quenching constants determined that the quenching efficiency of vanillic acid is at least two-fold that of p-coumaric acid under the current detection conditions. The present ECL quenching approach provided an effective method to detect phenolic compounds using a low-cost, portable smartphone-based ECL sensor.     

Electrochemiluminescence Distance and Reactivity of Coreactants Determine the Sensitivity of Bead-Based Immunoassays

Herein we report the study of electrochemiluminescence (ECL) generation by tris(2,2′-bipyridyl)ruthenium (Ru(bpy)₃²⁺) and five tertiary amine coreactants. The ECL distance and lifetime of coreactant radical cations were measured by ECL self-interference spectroscopy. And the reactivity of coreactants was quantitatively evaluated in terms of integrated ECL intensity. By statistical analysis of ECL images of single Ru(bpy)₃²⁺-labeled microbeads, we propose that ECL distance and reactivity of coreactant codetermine the emission intensity and thus the sensitivity of immunoassay. 2,2-bis(hydroxymethyl)-2,2′,2′′-nitrilotriethanol (BIS-TRIS) can well balance ECL distance-reactivity trade-off and enhance the sensitivity by 236 % compared with tri-n-propylamine (TPrA) in the bead-based immunoassay of carcinoembryonic antigen. The study brings an insightful understanding of ECL generation in bead-based immunoassay and a way of maximizing the analytical sensitivity from the aspect of coreactant.