唑烷酮类化合物的光合成研究

通过光化学方法取代传统的金属催化等法合成重要的药物中间体唑烷酮,反应条件温和、操作简便、产率较高且污染少.同时研究了丙酮、甲醇、乙腈3种溶剂与水的不同配比对反应产物的影响.随着溶剂极性增加,立体选择性有一定提高.     

基于离子液体极性下苯二溴代反应选择性研究

以溴苯为原料与液溴反应,通过在极性溶剂中添加离子液体改变溶剂的极性、改变反应温度等条件,提高其邻位或对位的单一选择性。结果表明,溶剂极性增大,对位产物选择性提高,溶剂极性降低,邻位产物选择性提高。当CH2Cl2中离子液体含量为2(wt)%时,对位产物相对含量达到最大(92.02%)。     

含离子液体的极性溶剂中溴苯的二溴代反应选择性

以溴苯为原料与液溴反应,通过在极性溶剂中添加离子液体改变溶剂的极性、改变反应温度等条件,提高其邻位或对位的单一选择性。结果表明,溶剂极性增大,对位产物选择性提高,溶剂极性降低,邻位产物选择性提高。当CH2Cl2中离子液体含量为2(wt)%时,对位产物相对含量达到最大(92.02%)。     

ZnCl2催化木质素磺酸盐加氢液化的溶剂效应

选用ZnCl₂为催化剂在高压反应釜中进行加氢液化反应,利用GC-MS和红外光谱技术,研究溶剂极性及供氢能力对木质素磺酸盐液化产率及产物的影响。产率分析表明,极性溶剂有利于木质素液化转化,供氢溶剂有利于提高轻馏分产率,水溶剂条件下木质素液化转化率最高,甲醇溶剂体系条件下轻馏分产率最高,相对最低液化转化率及轻馏分产率的1,4二氧六环溶剂体系分别提高2.0倍和1.9倍。GC-MS分析表明,中等极性溶剂有利于中间产物溶解稳定,供氢溶剂四氢萘通过释放氢自由基结合稳定中间产物。乙醇溶剂条件下中间产物相对含量是48.76%,相对最低含量水溶剂体系提高2.2倍。红外光谱分析表明,醇类溶剂参与反应,焦油产物羟基峰强度增强。     

溶剂热法在金属基片上制备薄膜材料的研究进展

利用溶剂热法在反应性基片(金属基片)上制备无机微米(纳米)晶薄膜是最近发展起来的一种制备薄膜的新方法。该方法操作简单,可以通过调整溶剂、表面活性剂、温度等反应条件来控制薄膜的形状。作者通过实验用溶剂热法在铜基片上制备了Cu2Se薄膜。     

用气相色谱法研究乙酸乙烯酯不对称氢甲酰化反应中溶剂的影响

用毛细管气相色谱、色－质谱和旋光色散及圆二色性谱仪等方法对乙酸乙烯酯在非极性和极性溶剂中的不对称氢甲酰化反应产物进行分离和鉴定。实验结果表明,在非极性溶剂中反应的收率、选择性、光学收率ｅ．ｅ．值（ｅｎａｎｔｉｏｍｅｒｉｃｅｘｃｅｓｓ）均比极性溶剂中的结果为好。由此探讨了不对称氢甲酰化反应中溶剂的影响。     

聚（3，4-二氯）噻吩的制备及表征

以四氯噻吩为原料,采用化学合成法制备了聚（3,4-二氯）噻吩．对影响合成材料结构规整度的溶剂极性进行了初步探讨,并采用元素分析、红外光谱、^13C NMR核磁谱等对目标产物进行了表征．结果表明,当采用极性较低的乙二醇二甲醚作溶剂时,可得到规整度较高的目标产物．     

微波作用下高分子咪唑盐催化合成含氟芳香物

高分子咪唑盐1是一种新型高分子相转移催化剂,具有制备简单、稳定性好、催化活性高等特点。TG分析表明,其分解温度可达350℃左右。在微波作用下,采用此高分子咪唑盐相转移催化剂于中等极性的非质子溶剂中成功制备了系列含氟硝基苯类化合物,其收率为72.1%～94.4%,反应时间较常规加热最多可缩短60%以上,拓宽了卤素交换氟化反应溶剂的选择空间。选用中等极性溶剂,反应中还可突出地体现出微波对反应的“非热效应”。     

极性溶剂相费托合成的产物分布特征

在间歇反应釜中研究了极性溶剂中工业铁基催化剂上费托合成的产物分布特点,考察了不同极性溶剂(聚乙二醇400和600,1,4-丁二醇,乙二醇)和非极性溶剂正辛烷,反应条件(温度,进料H2/CO比,反应时间)和操作模式(间歇,半连续)对产物选择性和链增长因子α的影响.结果表明,在所考察的条件下,产物中α-烯烃(除了乙烯)的选...     

高分子钴和铁络合物对环氧丙烷与二氧化碳反应生成环丙烯碳酸酯的催化作用

环丙烯碳酸酯(PC)是一种高极性的溶剂,可用作许多有机反应及多种聚合物的溶剂,近来,由于它具有非常高的介电常数,也作为高压Li_2O-MnO_2电池的介电质使用.由环氧丙烷(PO)与二氧化碳作用生成环丙烯碳酸酯的反应(1),W.J.Pepple已研究过用四配位的胺盐催化,但是,反应条件比较苛刻,而且反应产物带有颜色;Nomura等用有机锡和有机锑化合物催化,反应可以在相对温和的条件下进行.但以上均属于均相催化,从产物中分离和回收催化剂比较困难.为了克服这些缺点,我们研究了几种高分子金属络合物对该反应的催化作用,有的活性较高.     

Mixed 1,1-bisphosphorus compounds: synthesis, alkylation, and Horner-Wadsworth-Emmons olefination reactions

Mixed 1,1-bisphosphorus compounds were prepared by the reaction between a phosphonate diester anion and a P(III) chlorophosphine, or its P(V) borane complex. After deprotonation either in situ or in a separate step, the resulting products can be alkylated or reacted with carbonyl compounds. A variety of olefination products were obtained, generally with high E-stereoselectivity. The reaction is competitive with other methods for the synthesis of alkenyl phosphorus compounds, and in the case of trisubstituted alkenes, regio- and stereocontrolled olefination provides products not easily accessible via any other process. The deprotection of phosphine-borane adducts was also demonstrated. Overall, a variety of novel organophosphorus reagents and products were synthesized easily and in good yields.     

Zirconyl Chloride Promoted Highly Efficient Domino Synthesis of New 1, 2, 3, 4-Tetrahydroquinoline Derivatives in Water

The tetrahydroquinoline moiety is present in various natural products, and many tetra- hydroquinoline derivatives exhibit a broad range of biological activities1. Therefore, it has attracted continuous interest to develop methods for the synthesis of tetr…     

N,N'-dimethylformamide-derived products from catalytic oxidation of 3-hydroxyflavone

The biomimetic conversion of 3-hydroxyflavone in the presence of a copper(II) catalyst, dioxygen, and N,N'-dimethylformamide to oxidation products as well as two previously unreported solvent-derived products is seen. The two solvent-derived products were characterized, and their crystal structures were determined.     

Mass Spectrometric Studies on Metai-hexafluorobenzene Anionic Comolexes(M=Ag,Au,Pd,Pt,Pb and Bi)

The anionic products from the reactions between metal(M=Ag,Au,Pd,Pt,Pb and Bi) vapour produced by laser ablation and hexafluorobenzene seeded in carrier gas(Ar) were studied by means of a homemade reflectron time-of-flight mass spectrometry(RTOF-MS).Experimental results show that the dominant products were [MmC6F6]-complexes for the reactions of Ag,Au,Pd and Pt with C6F6,while the dominant products were [MmC6Fs]- complexes for the reactions of Pb and Bi with C6F6.The formation mechanisms of the products,including the adsorption of metal cluster anions on hexafluorobenzene and the C-F cleavage induced by metal cluster anions,were discussed.     

基于热重红外联用分析的PE、PS、PVC热解机理研究

利用TGA-FTIR联用技术考察了PE、PS、PVC三种典型塑料的热解特性。结果表明,热稳定性从弱到强依次为PVC、PS、PE。PE热解反应过程为典型的一段式反应,红外光谱分析结果表明,PE热解过程为无规则断链形式,生成产物成分复杂,且随热解过程而改变,开始以饱和烃基团为主,中后期以烯烃基团为主,同时有少量炔烃;PS热解过程同样为一段式反应,红外光谱显示主要热解产物为苯乙烯单体,说明热解过程主要是苯乙烯的解聚过程;PVC热解过程较为复杂,主要分为脱氯阶段和共轭多烯重构阶段,红外光谱结果表明,产物中有芳香族化合物。脱氯过程和共轭多烯重构、环化过程在时间和空间上有重合,给二噁英类污染物的生成制造了可能。     

电感耦合等离子体发射光谱法分析小麦粉制品中的K、Na、Ca、Mg、Al、Ti

采用硝酸-高氯酸混合酸湿式消化处理样品,建立了ICP-OES 法同时测定小麦粉及制品中钾、钠、钙、镁、铝、钛6种元素的方法.方法优化了仪器参数,探讨了不同消解方法和光谱干扰扣除方法,建立方法的线性范围宽,相关系数均大于0.9999,钾、钠、钙、镁、铝、钛检出限分别为10.2、9.5、0.25、0.006、0.31、0....     

Cholesterol ozonolysis: kinetics, mechanism, and oligomer products

Fine particles of cholesterol were reacted with ozone under pseudo-first-order conditions in an aerosol bag reactor. Gas-phase ozone was monitored using an ozone meter. Particle size distribution functions were determined using a scanning mobility particle sizer, which selected particle sizes for introduction into a photoionization aerosol mass spectrometer (PIAMS). PIAMS was used to determine the concentration of cholesterol in the aerosol as a function of reaction time. Dilution corrected rate coefficients were used to calculate the reactive uptake coefficient for ozone onto cholesterol particles as (2.8 +/- 0.4) x 10(-6). Uptake was found to be independent of particle diameter for the sizes studied (100 and 200 nm), suggesting that the uptake is surface mediated. The reaction products were also collected on filters and analyzed by electrospray ionization (ESI) mass spectrometry with both direct infusion and liquid chromatography sample introduction. The main primary reaction products contained one, two, or three oxygens added to the cholesterol moiety. Secondary oligomeric products were also observed, consisting of covalently bound dimers and trimers. Tandem mass spectrometry was used to confirm the expected structures of these compounds. The dimers appear to be acyl hydroperoxides, consistent with a previously reported mechanism for the reaction in a nonparticipating solvent. Finally, the magnitude of the uptake coefficient confirms that cholesterol is suitable as a local source tracer for source apportionment of ambient organic aerosol.     

Evaluation of thin-layer chromatography methods for quality control of commercial products containing Aesculus hippocastanum, Turnera diffusa, Matricaria recutita, Passiflora incarnata, and Tilia occidentalis

In Mexico, plant-derived products with health claims are sold as herbal dietary supplements, and there are no rules for their legal quality control. Aesculus hippocastanum, Turnera diffusa, Matricaria recutita, Passiflora incarnata, and Tilia occidentalis are some of the major commercial products obtained from plants used in this region. In this paper, we describe the effectiveness of thin-layer chromatography methods to provide for the quality control of several commercial products containing these plants. Standardized extracts were used. Of the 49 commercial products analyzed, only 32.65% matched the chromatographic characteristic of standardized extracts. A significant number of commercial products did not match their label, indicating a problem resulting from the lack of regulation for these products. The proposed methods are simple, sensitive, and specific and can be used for routine quality control of raw herbals and formulations of the tested plants. The results obtained show the need to develop simple and reliable analytical methods that can be performed in any laboratory for the purpose of quality control of dietary supplements or commercial herbal products sold in Mexico.     

Microbial‐induced synthesis of mineralization products based on the capture of carbon dioxide: Characteristics,reaction kinetics,interfacial adhesion properties,and mechanism of action

As a new type of green environment‐friendly cementitious material, microbial‐induced mineralization products have garnered more and more attention. In this paper, the synthesis of mineralization products under microbial inducement was conducted. The composition and microstructure of mineralization products were studied using energy‐dispersive spectrometer (EDS), X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The results showed that mineralization products were calcite, while the shape was similar to globular type, and particle size was about 5 μm. The effect of microbial culture solution, secretion solution, and concentration on the conductivity of the solution was compared and analyzed. During the formation of mineralization products, bacterial bodies not only played the role of nucleation sites but also accelerated the deposition of mineralization products. Thus, it could be seen that the bacterial bodies had a certain influence on the reaction kinetics. The adhesion force of mineralization products was evaluated by the interfacial adhesion properties between the mineralization products and glass slides. The results of the sonication test and scratch test indicated that the interfacial adhesion strength between mineralization products and glass slides was closely related to the mass of mineralization products deposited. The larger the mass of mineralization products deposited, the greater the interfacial adhesion strength. Based on the above research and analysis, the reaction process and mechanism model of microbial‐induced mineralization were defined.     

Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.