Inhibitive action of ethanol extracts from Nauclea latifolia on the corrosion of mild steel in H2SO4 solutions and their adsorption characteristics

The inhibitive action of ethanol extracts from leaves (LV), bark (BK) and roots (RT) of Nauclea latifolia on mild steel corrosion in H₂SO₄ solutions at 30–60 °C was studied using weight loss and gasometric techniques. The extracts were found to inhibit the corrosion of mild steel in H₂SO₄ solutions and the inhibition efficiencies of the extracts follow the trend: RT > LV > BK. The inhibition efficiency increased with the extracts concentration but decreased with temperature rise. Physical adsorption of the phytochemical components of the plant on the metal surface is proposed as the mechanism of inhibition. The adsorption characteristics of the inhibitor were approximated by the thermodynamic-kinetic model of El-Awady et al.     

Essential oil of Salvia aucheri mesatlantica as a green inhibitor for the corrosion of steel in 0.5 M H2SO4

Essential oil of aerial parts of Salvia aucheri Boiss. var. mesatlantica was obtained by hydrodistillation and analyzed by GC and GC/MS. The oil was predominated by camphor (49.59%). The inhibitory effect of this essential oil was estimated on the corrosion of steel in 0.5 M H₂SO₄ using electrochemical polarization and weight loss measurements. The corrosion rate of steel is decreased in the presence of natural oil. The inhibition efficiency was found to increase with oil content to attain 86.12% at 2 g/L. Polarization curves revealed that the oil of S. aucheri mesatlantica acts as mixed type inhibitor with a strong predominance of anodic character. The temperature effect on the corrosion behavior of steel in 0.5 M H₂SO₄ without and with the inhibitor at 2 g/L was studied in the temperature range from 303 to 343 K, the associated activation energy have been determined. The adsorption of oil on the steel surface was found to obey Langmuir’s adsorption isotherm.     

Xanthione: A new and effective corrosion inhibitor for mild steel in sulphuric acid solution

The adsorption and inhibition effect of xanthione (XION) on mild steel in 0.5 M H₂SO₄ at 303–333 K were studied using gravimetric and UV–visible spectrophotometric methods. The results obtained show that XION acts as an effective corrosion inhibitor for mild steel in sulphuric acid and inhibition efficiency reaches 98.0% at a very low inhibitor concentration of 10 μM. Inhibition efficiency was found to increase with increase in XION concentration but decreased with temperature suggesting physical adsorption mechanism. Arrhenius law and its transition equation lead to estimate the activation parameters of the corrosion process. XION inhibits the corrosion of mild steel effectively at moderate temperature and adsorbs according to the Langmuir isotherm. Thermodynamic parameters governing the adsorption process have been calculated and discussed. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Attempt to correlate the molecular structure to quantum chemical indices was made using density functional theory (DFT).     

Monitoring corrosion and corrosion control of low alloy ASTM A213 grade T22 boiler steel in HCl solutions

Rates of corrosion of low alloy ASTM A213 grade T22 boiler steel were monitored in aerated stagnant 0.50 M HCl solutions at different temperatures (283–303 K) using Tafel extrapolation method and the non-destructive electrochemical frequency modulation (EFM) technique, complemented with XPS examinations. Serine (Ser) was introduced as a corrosion-safe inhibitor. Corrosion rates (in μm y^?1) obtained from these two methods was in good agreement. Tafel plots showed that Ser acted mainly as a cathodic-type inhibitor. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. XPS examinations of the electrode surface confirmed the existence of such adsorbed film. The inhibition efficiency increased with increase in Ser concentration, while it decreased with temperature, suggesting physical adsorption. Activation energies have been calculated in the absence and presence of various concentrations of Ser by measuring the temperature dependence of the corrosion rate obtained from the two methods employed. It was found that the activation energy in the presence of Ser is higher than that in bare HCl solution. The adsorptive behaviour of Ser followed Temkin-type isotherm. The standard free energy of adsorption was estimated to be ?25 kJ mol^?1 at 303 K. These results confirmed the occurrence of physical adsorption.     

Poly (vinyl alcohol – aniline) water soluble composite as corrosion inhibitor for mild steel in 1 M HCl

Poly (vinyl alcohol – aniline) PVAA composite was tested for its performance in protecting mild steel MS against corrosion in 1 M HCl. The inhibitive parameters were evaluated by means of weight loss, electrochemical polarization and impedance methods. Results indicated that the addition of PVAA to the acid reduces the corrosion of the metal. Inhibition efficiency increases with increase in inhibitor concentration. The results further revealed that PVAA at a concentration of 2000 ppm furnishes a maximum of 92% inhibition efficiency. Thermodynamic parameters such as free energy of adsorption, heat of adsorption, etc., had been evaluated from temperature studies. The adsorption of PVAA followed Langmuir and Temkin adsorption isotherms. Polarization curves revealed that PVAA is a mixed inhibitor.     

Inhibiting effects of 2-mercapto-1-methylimidazole on copper corrosion in 0.5 M sulfuric acid

The inhibiting efficiency of 2-mercapto-1-methylimidazole (MMI) on copper corrosion in sulfuric acid was investigated at 30 °C. Its effectiveness was assessed through electrochemical impedance spectroscopy, potentiodynamic polarization and gravimetric measurements. The results of study reveal that the inhibition efficiency of MMI depends on its concentration and attains approximately 81% at 10^?4 M. The inhibitor was adsorbed on the copper surface according the Langmuir adsorption isotherm model. The value of standard free energy of adsorption was calculated from this isotherm.     

Adsorption behavior and corrosion inhibitive potential of xanthene on mild steel/sulphuric acid interface

The inhibition of xanthene (XEN) on the corrosion of mild steel in 0.5 M H₂SO₄ was studied by gravimetric and UV–visible spectrophotometric methods at 303–333 K. Results obtained show that XEN act as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in XEN concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using Statistical Physics were calculated and discussed. The corrosion process in 0.5 M H₂SO₄ in the absence and presence of XEN follows zero-order kinetics. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Quantum chemical calculations using DFT were used to calculate some electronic properties of the molecule in order to ascertain any correlation between the inhibitive effect and molecular structure of xanthene.     

Inhibition effect of hexadecyl pyridinium bromide on the corrosion behavior of some austenitic stainless steels in H2SO4 solutions

The inhibition effect of hexadecyl pyridinium bromide (HDPB) as a cationic surfactant on the corrosion behavior of some Egyptian austenitic stainless steel SS 304L, SS 316H and SS 304H in 0.5 M H₂SO₄ solutions was investigated by using potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results indicate that HDPB is a good inhibitor for the samples under investigation in 0.5 M H₂SO₄ solutions. In addition, the inhibition efficiency η% increases with the inhibitor concentration while decreases with the increasing temperature referring to physical adsorption. The adsorption of the inhibitor obeys a Temkin adsorption isotherm. Polarization curves show that HDPB is a mixed inhibitor in H₂SO₄ solutions. The results obtained from polarization and impedance measurements are in good agreement. Activation-free energies, enthalpies, and entropies for the inhibition process of HDPB were determined.     

Corrosion inhibition of carbon steel in hydrochloric acid 0.5 M by hexa methylene diamine tetramethyl-phosphonic acid

The efficiency of hexa methylene diamine tetra methyl-phosphonic acid (HMDTMP), as corrosion inhibitor for carbon steel in 0.5 M HCl, has been determined by gravimetric and electrochemical measurements. Polarization curves indicate that the compound is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. Adsorption of HMDTMP derivatives on the carbon steel surface is in agreement with the Langmuir adsorption isotherm model, and the calculated Gibbs free energy value confirms the chemical nature of the adsorption. EIS results show that the charge in the impedance parameters (R_t and C_dl) with concentrations of HMDTMP is indicative. The adsorption of this molecule leads to the formation of a protective layer on carbon steel surface. The electrochemical results have also been supplemented by surface morphological studies.     

Synthesis,characterization and corrosion inhibition efficiency of 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline on mild steel in sulphuric acid

Phenanthroline derivative, 2-(6-methylpyridin-2-yl)-1H-imidazo[4,5-f][1,10] phenanthroline (MIP) was synthesized and characterized by elemental analysis, FT-IR, ¹H NMR, ¹³C NMR, and single crystal X-ray diffraction study. MIP was evaluated as corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solution using gravimetric and UV–Visible spectrophotometric methods at 303–333 K. Results obtained show that MIP acts as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in MIP concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using statistical physics were calculated and discussed. The UV–Visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a MIP-Fe complex.     

Spirulina platensis – A novel green inhibitor for acid corrosion of mild steel

The inhibition of the corrosion of mild steel in 1 M HCl and 1 M H₂SO₄ by Spirulina platensis has been studied at different temperatures viz., 303 K, 313 K and 323 K by weight loss method, potentiodynamic polarization method, electrochemical impedance spectroscopy measurements and SEM analysis. The inhibition efficiency increased with increasing concentration of the inhibitor in both HCl and H₂SO₄ media. The results of weight loss studies correlated well with those of impedance and polarization studies. From the results of weight loss studies at various temperatures, the mode of adsorption is confirmed to be physisorption. Further the adsorption has been found to follow Temkin isotherm. From this isotherm, the free energy of adsorption (ΔG) and entropy (ΔS) are calculated. The study reveals the corrosion inhibition potential of S. platensis in both the acid media, thus bringing to light another facet of this microalga as it has so far been used only to produce antioxidant principles, finding extensive use in medicine especially as neutraceutical.     

Assembly of succinic acid and isoxazolidine motifs in a single entity to mitigate CO2 corrosion of mild steel in saline media

Inhibition of CO₂ corrosion of mild steel in 0.5 M NaCl under atmospheric pressure at 40 °C as well as high pressure (10 bar) at 120 °C by 2-[2-methyl-4(or 5)-alkylisoxazolidin-5(or 4)-yl)methyl]succinic acids, a new class of molecules having inhibitive motifs of succinic acid, isoxazolidine and hydrophobic alkyl chain assembled in a single entity, has been examined by gravimetric and electrochemical methods. Inhibitor molecule containing CH₃(CH₂)₈ outperformed its counterpart with a shorter hydrophobe CH₃(CH₂)₄ and two other commercial imidazoline-based inhibitors. The effectiveness of these new inhibitors was also evaluated by electrochemical impedance spectroscopy. The inhibition efficiency by EIS was found to be 75%, 91% and 98% in the presence of 1, 5 and 20 ppm, respectively, at 40 °C. The potentiodynamic polarization studies indicated that the new inhibitors act as anodic inhibitors. The adsorption of the synthesized inhibitors follows Temkin adsorption isotherm model with favorable high values of –ΔG°_ads and −ΔH°_ads pointing the inhibitors adsorbed on the metal surface by chemisorption process. The XPS study confirmed the adsorption of the inhibitors on the metal surface.     

Experimental,Monte Carlo and molecular dynamics simulations to investigate corrosion inhibition of mild steel in hydrochloric acid solutions

The efficiency of three furan derivatives, namely 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A), 2-(p-toluidinylmethyl)-5-nitro furan (Inh. B) and 2-(p-toluidinylmethyl)-5-bromo furan (Inh. C), as possible corrosion inhibitors for mild steel in 1.0 M HCl, has been determined by weight loss and electrochemical measurements. These compounds inhibit corrosion even at very low concentrations, and 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A) is the best inhibitor. Polarization curves indicate that all compounds are mixed-type inhibitors, affecting both cathodic and anodic corrosion currents. Adsorption of furan derivatives on the mild steel surface follows the Langmuir adsorption isotherm, and the calculated Gibbs free energy values confirm the chemical nature of the adsorption. Monte Carlo simulations technique incorporating molecular mechanics and molecular dynamics can be used to simulate the adsorption of furan derivatives on mild steel surface in 1.0 M HCl.     

Polyvinyl alcohol–sulphanilic acid water soluble composite as corrosion inhibitor for mild steel in hydrochloric acid medium

The inhibitive action of synthesised polyvinyl alcohol–sulphanilic acid (PVASA) composite on the corrosion of commercial mild steel in 1 M HCl medium has been investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopic (EIS) methods. Characterization of PVASA composite has been carried out using Fourier transform infrared spectroscopy (FTIR). Experimental results reveal that PVASA composite acts as an inhibitor in the acid environment. The inhibition efficiency increases with an increase in the concentration of the inhibitor. Maximum inhibition efficiency of PVASA composite was found to be 84% at 6000 ppm. Thermodynamic and kinetic parameters have been obtained from temperature studies. Electrochemical measurement reveals that PVASA composite acts as a mixed inhibitor and the adsorption follows Langmuir adsorption isotherm.     

Characterisation of salt films on dissolving metal surfaces in artificial corrosion pits via in situ synchrotron X-ray diffraction

The salt films formed on metal surfaces dissolving inside artificial corrosion pits formed in 1 M HCl have been probed with synchrotron X-ray diffraction. NiCl₂ · 6H₂O is the main phase in the salt film on nickel, whereas salt films on both iron and 316 L stainless steel are predominantly FeCl₂ · 4H₂O. However, the salt film on iron has a very fine homogeneous crystallite size whereas that on stainless steel is much coarser. The potential-dependence of the film formed on iron has been determined.     

Corrosion inhibition of carbon steel immersed in a 1 M HCl solution using benzothiazole derivatives

Corrosion inhibition effect of 2-mercaptobenzothiazole (MBT) and 2-aminobenzothiazole (ABT) compounds on ST-37 carbon steel in 1 M hydrochloric acid solution was investigated by electrochemical impedance spectroscopy (EIS), and it was observed that both of these compounds have corrosion inhibition effect on carbon steel. Evaluation of electrochemical behavior in test solutions showed that by increasing the immersion time from 15 to 300 min, corrosion resistance of samples is increased and at the same immersion time MBT has a better corrosion inhibition in comparison to ABT. AFM technique was performed for MBT and ABT. The results of calculations showed superior inhibition efficiency of MBT in comparison to ABT. This can cause easier protonation and consequently adsorption on the metal surface occurs.     

Electrochemical investigation of corrosion and corrosion inhibition of iron in hydrochloric acid solutions

The inhibition effect of 1-methyl pyrazole (MPA) on the acidic corrosion of iron in 1.0 M HCl was studied at different concentrations (10^?3–10^?2 M) by potentiodynamic polarization and electrochemical impedance spectroscopy, and EIS measurements. It is found from the polarization studies that methyl pyrazole (MPA) behaves mainly as anodic inhibitor in HCl. Values of polarization resistance (R_p) and double layer capacitance (C_dl) in the absence and presence of MPA in 1.0 M HCl are determined. The adsorption of MPA on iron surface from HCl is found to obey Temkin adsorption isotherm.     

Effect of three 2-allyl-p-mentha-6,8-dien-2-ols on inhibition of mild steel corrosion in 1 M HCl

2-Allyl-p-mentha-6,8-dien-2-ols P1−P3 synthesized from carvone P are tested as corrosion inhibitors of steel in 1 M HCl using weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS) methods. The addition of 2-allyl-p-mentha-6,8-dien-2-ols reduced the corrosion rate. Potentiodynamic polarisation studies clearly reveal that the presence of inhibitors does not change the mechanism of hydrogen evolution and that they act essentially as cathodic inhibitors. 2-Allyl-p-mentha-6,8-dien-2-ols tested adsorb on the steel surface according to Langmuir isotherm. From the adsorption isotherm some thermodynamic data for the adsorption process are calculated and discussed. EIS measurements show the increase of the charge-transfer resistance with the inhibitor concentration. The highest inhibition efficiency (92%) is obtained for P1 at 3 g/L. The corrosion rate decreases with the rise of temperature. The corresponding activation energies are determined.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

On the corrosion inhibition of iron in hydrochloric acid solutions,Part I: Electrochemical DC and AC studies

The inhibitive action of 4-methyl pyrazole (4MP) against the corrosion of iron (99.9999%) in solutions of hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). At inhibitor concentration range (10^?3–10^?2 M) in 1.0 M acid, the results showed that 4MP suppressed mainly the anodic processes of iron corrosion in 1.0 M HCl by adsorption on the iron surface according to Temkin adsorption isotherm. Both potentiodynamic and EIS measurements reveal that 4MP inhibits the iron corrosion in 1.0 M HCl and that the efficiency increases with increasing inhibitor concentration. Data obtained from EIS were analyzed to model the corrosion inhibition process through an equivalent circuit.