Biodiesel preparation from transesterification of glycerol trioleate catalyzed by basic ionic liquids

In the present study,the transesterification of glycerol trioleate was carried out over a basic ionic liquid,1-butyl-3- methylimidazolium hydroxide([Bmim]OH) and an 87.2%yield of methyl ester was achieved.The product was isolated through simple decantation from the biphasic system due to the immiscibility of[BmimJOH with ester.[Bmim]OH can be easily recovered and reused six times without dramatic decrease in ester yield.     

Ytterbium(III) triflate: An efficient and simple catalyst for isomerization of 2′‐hydroxychalcone and 2′‐aminochalcones in ionic liquid

Isomerization of 2′‐hydroxychalcone and 2′‐aminochalcone have been investigated using ytterbium(III) trifluromethanesulfonate {Yb(OTf)₃} (30 mol %) as Lewis acid catalyst in [bmim][BF₄] ionic liquid. The effect of different metal triflates as Lewis acid, catalyst loading and reaction media was studied for this isomerization reaction. Advantages of the methodology include short reaction time, excellent yields, catalytic use of Lewis acid, and recovery and reuse of the catalyst. J. Heterocyclic Chem., (2011).     

离子液体1-乙基-3-甲基咪唑三氟甲基磺酸盐与水之间的氢键作用

通过衰减全反射红外（ATR-IR）光谱、二维红外相关谱结合量子化学计算研究了1-乙基-3-甲基咪唑三氟甲基磺酸盐（[emim][OTf]）和水之间的氢键作用. 结果表明,在[emim][OTf]^-水体系中,当水的浓度较低时（0.1< x（D₂O）< 0.3）,水分子的主要存在形式是包裹在离子液体中的没有缔合的单体. 水分子优先填充到[emim][OTf]的空隙中,并且与[emim][OTf]的阴离子形成“[OTf]^-…HOH…[OTf]^-”结构,水分子与[emim][OTf]的阳离子的相互作用位点是烷基氢而不是芳香氢;当水分子浓度较高时,水分子倾向于自身缔合形成小团簇结构,水分子与[emim][OTf]的阳离子的相互作用位点是芳香氢而不是烷基氢.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Catalytic Conversion of Glucose into Levulinic Acid Using 2-Phenyl-2-Imidazoline Based Ionic Liquid Catalyst

Levulinic acid (LA) is an industrially important product that can be catalytically valorized into important value-added chemicals. In this study, hydrothermal conversion of glucose into levulinic acid was attempted using Brønsted acidic ionic liquid catalyst synthesized using 2-phenyl-2-imidazoline, and 2-phenyl-2-imidazoline-based ionic liquid catalyst used in this study was synthesized in the laboratory using different anions (NO₃, H₂PO₄, and Cl) and characterized using ¹H NMR, TGA, and FT-IR spectroscopic techniques. The activity trend of the Brønsted acidic ionic liquid catalysts synthesized in the laboratory was found in the following order: [C₄SO₃HPhim][Cl] > [C₄SO₃HPhim][NO₃] > [C₄SO₃HPhim][H₂PO₄]. A maximum 63% yield of the levulinic acid was obtained with 98% glucose conversion at 180 °C and 3 h reaction time using [C₄SO₃HPhim][Cl] ionic liquid catalyst. The effect of different reaction conditions such as reaction time, temperature, ionic liquid catalyst structures, catalyst amount, and solvents on the LA yield were investigated. Reusability of [C₄SO₃HPhim][Cl] catalyst up to four cycles was observed. This study demonstrates the potential of the 2-phenyl-2-imidazoline-based ionic liquid for the conversion of glucose into the important platform chemical levulinic acid.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

Solubility of H2S in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of hydrogen sulfide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([HOemim]⁺)-based ionic liquids (ILs) containing different anions, viz. hexafluorophosphate ([PF₆]⁻), trifluoromethanesulfonate ([OTf]⁻), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]⁻) at temperatures ranging from 303.15 to 353.15 K and pressures of up to about 1.8 MPa was measured by a volumetric based static apparatus. The solubility data were correlated using two models: (1) the Krichevsky–Kasarnovsky equation and (2) the extended Henry's law combined with the Pitzer's virial expansion for the excess Gibbs energy. Henry's law constants (at zero pressure) in mole-fraction and molality scales were obtained at different temperatures by means of these two models. Using the solubility data, the partial molar thermodynamic functions of solution, i.e. Gibbs energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of H₂S is greater than that of CO₂ in the corresponding ILs studied in this work and that the solubility of both gases increases as the number of trifluoromethyl (–CF₃) groups in the anion increases, i.e. the solubility behavior of both gases follows the order [HOemim][Tf₂N] ≥ [HOemim][OTf] > [HOemim][PF₆] > [HOemim][BF₄].     

碱性离子液体催化甘油合成1,2-甘油碳酸酯(英)

以离子液体为催化剂,在无溶剂体系中,考察了生物质平台化合物甘油转化1,2-甘油碳酸酯的反应.与酸性离子液体和常用无机碱性催化剂相比,碱性离子液体咪唑基1-丁基-3-甲基咪唑([Bmim]Im)、氢氧化1-丁基-3-甲基咪唑([Bmim]OH)、咪唑基1-烯丙基-3-甲基咪唑([Amim]Im)、氢氧化1-烯丙基-3-甲基咪唑([Amim]OH)在甘油与碳酸二甲酯的酯交换反应中表现出优异的活性.其中,以[Bmim]Im离子液体为催化剂时甘油转化率为98.4%和甘油碳酸酯选择性接近100%.另外,该离子液体可以回收重复利用3次后甘油转化率仍可达92%,甘油碳酸酯选择性可近100%.此碱性离子液体催化方法具有反应结果较好、产物分离简单、条件温和以及环境友好等特点.     

Physical and CO2-Absorption Properties of Imidazolium Ionic Liquids with Tetracyanoborate and Bis(trifluoromethanesulfonyl)amide Anions

Ionic liquids with tetracyanoborate ([TCB]^?) and bis(trifluoromethanesulfonyl)amide ([Tf₂N]^?) anions generally have low viscosities and high CO₂ capacities, and thus they are attractive solvents for CO₂-related applications. Herein, we have investigated physical and CO₂-absorption properties of 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid ([emim][TCB]) to discuss the anion effects of [TCB]^? in comparison with the previous results of [emim][Tf₂N]. The density, viscosity, electrical conductivity, and isobaric molar heat capacity were measured as a function of temperature at atmospheric pressure. [emim][TCB] has both lower density and isobaric molar heat capacity than [emim][Tf₂N]. [emim][TCB] shows superior transport properties (lower viscosity and higher electrical conductivity) compared to [emim][Tf₂N], whereas the Walden plots of molar conductivity against fluidity (reciprocal of viscosity) have smaller values in [emim][TCB] than in [emim][Tf₂N] at certain fluidities. The high-pressure CO₂ solubilities were also determined in [emim][TCB]. The mole fraction scaled solubility of CO₂ in [emim][TCB] is slightly larger than that in [emim][Tf₂N] at certain pressures and temperatures. The former ionic liquid shows much higher molarity scaled solubility of CO₂ than the latter because of the smaller molar volume. It is suggested that both anions have similar strength of intermolecular interaction with CO₂ and comparable changes in the solvent structure between neat and CO₂ solution, in view of the thermodynamic parameters of dissolution.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Mild conversion of propargylic alcohols to α,β-unsaturated enones in ionic liquids (ILs); a new ‘metal free’ life for the Rupe rearrangement

A mild and selective transition metal free protocol for the conversion of propargylic alcohols to cyclic and acyclic α,β-unsaturated enones via the Rupe rearrangement is reported. The method utilizes the Brønsted acidic ionic liquid [BMIM-SO₃H][OTf] as catalyst and [BMIM][PF₆] as solvent and offers the potential for recycling and reuse of the IL solvent. The feasibility to synthesize bicyclic fused cyclopentenone derivatives via a Rupe → Aldol → Nazarov sequence utilizing this protocol has also been demonstrated.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

[(bmpyr)2{Zn(OC6H3(NO2)2)4}]: Influence of an Ionic Liquid on Liquid/Liquid Extraction of Metal Ions in a Biphasic System

The compound [(bmpyr)₂{Zn(OR)₄}] (OR = 2,4‐dinitriphenolate) has been prepared from Zn(NO₃)₂·6H₂O and sodium 2,4‐dinitrophenolate in a biphasic aqueous ionic liquid (Butyl‐methyl‐pyrrolidinium trifluoromethylsulfonate [bmpyr][OTf]) system. The presence of the anionic zinc complex in [bmpyr][OTf] is made possible by the exchange of the ionic liquid anions into the aqueous phase for the zinc complex. [(bmpyr)₂{Zn(OR)₄}] was characterized in solution by ¹³C‐ and ¹H‐NMR spectroscopy and in the solid state by crystal structure determination. The zinc complex represents the first type of a zinc complex with more than two phenolate ligands.     

N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation

The liquid-liquid equilibria (LLE) of four ternary systems comprising toluene, heptane, and an ionic liquid with the cation N-butylpyridinium ([bpy]), or 2-methyl-N-butylpyridinium ([2bmpy]), or 3-methyl-N-butylpyridinium ([3bmpy]), or 4-methyl-N-butylpyridinium ([4bmpy]), and the anion bis-(trifluoromethylsulfonyl)imide ([Tf₂N]) were determined at 313.2 K and atmospheric pressure. The distribution ratios and the separation factor curves from the LLE data were plotted and compared to those for sulfolane. The results show no significant differences in the values of these parameters between [bpy][Tf₂N] and [2bmpy][Tf₂N], and between [3bmpy][Tf₂N] and [4bmpy][Tf₂N]. The experimental LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

High temperature and highly selective stationary phases of ionic liquid bonded polysiloxanes for gas chromatography

Due to the special performance of “dual nature” and synthetic flexibility, ionic liquids (ILs) have been an attractive research subject of stationary phases for gas chromatography (GC). In this work, a novel ionic liquid (IL) bonded polysiloxane ([PSOMIM][NTf₂]) with anion of bis-trifluoromethanesulfonylimide (NTf₂⁻) was synthesized, and another one with chloride anion ([PSOMIM][Cl]) was also prepared for the purpose of comparison. The thermo-stability of the product was evaluated by thermogravimetric (TG) test and the result indicated that [PSOMIM][NTf₂] did not decompose slightly until 380 °C. Then the solvation behaviors of the ILs were characterized using solvation parameter model. Subsequently, [PSOMIM][NTf₂] and [PSOMIM][Cl] were used as stationary phases to prepare capillary columns for GC, respectively. The column efficiency of [PSOMIM][NTf₂] column was 4776 plates/m (k = 3.64 ± 0.08, naphthalene), and that of the other one was 3170 plates/m (k = 2.84 ± 0.11, naphthalene). The selectivity of the novel stationary phases for analytes, including Grob reagent, aromatic positional isomers was further evaluated. Furthermore, the chromatograms of n-alkanes and polycyclic aromatic hydrocarbons (PAHs) on [PSOMIM][NTf₂] column were compared with that on [PSOMIM][Cl] column. [PSOMIM][NTf₂] stationary phase also exerted good selectivity for fatty acid methyl esters (FAMEs), polychlorinated biphenyls (PCBs) and aromatic amines.     

Solubility of high-value compounds in environmentally friendly solvents–liquid poly(ethylene glycol) and ionic liquids: Experimental study and thermodynamic analysis

In this work the (solid + liquid) equilibria (SLE) of the solution of sustainable solvents with five high-value compounds, thymol, ferulic acid, vanillic acid, caffeic acid and caffeine, was investigated. The sustainable solvents studied were liquid poly(ethylene glycol) of average molecular mass 200 and 400 – (PEG200 and PEG400), respectively as well as imidazolium ionic liquids with bistriflamide and triflate anions ([C₄mim][NTf₂] and [C₄mim][OTf]). The obtained SLE data were correlated using the semi-empirical equation proposed by Grant. The activity coefficients of the studied solutes were calculated. Based on these correlations and calculations as well as on the thermo-physical properties of the pure constituents, the SLE behavior of the studied solutions was analyzed and discussed.     

负载型氨基酸离子液体的制备及其对二氧化碳的吸附性能

采用浸渍蒸发法将四甲基铵甘氨酸([N1111][Gly])和四甲基铵赖氨酸([N1111][Lys])两种离子液体分别负载到硅胶(SG)表面,利用EA、TGA、BET和FT-IR等技术对所得到的吸附剂进行表征,考察了离子液体种类、离子液体负载量和温度等条件对其CO_2吸附性能的影响。结果表明,离子液体成功负载到硅胶表面,所制得的负载型氨基酸离子液体对二氧化碳具有良好的吸附性能。在所考察的温度范围(303.15-323.15 K)内,温度越高,平衡吸附量越小;在负载量为10%-60%,随着负载量的增加,平衡吸附量先增加后减小。对于[N1111][Gly]/SG,当负载量为22.4%(质量分数)、吸附温度为30℃、压力为0.1 M Pa时,二氧化碳的平衡吸附量可达到41 mg/g(相对于1 mol AAILs吸附0.62 mol CO_2),而且,吸附20 min即可达到平衡吸附量的90%。吸附剂在循环使用六次之后,其结构与性能均保持良好。     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Synthesis of coumarin derivatives in a microfluidic flow system employing the Pechmann condensation: A case study

For the synthesis of coumarin derivatives using the Pechmann condensation scheme, an acidic ionic liquid catalyst, abbreviated as [EBsImH][HSO ₄ ] , was prepared from the ring opening of 1,4-butanesultone by 1-ethylimidazole, followed by the addition of 1 equiv. H₂SO₄(c). The [EBsImH][HSO ₄ ] -catalyzed Pechmann condensation reactions proceeded smoothly in a batch setup, with recyclable [EBsImH][HSO ₄ ] showing great catalytic activity. The acidic ionic liquid catalyst [EBsImH][HSO ₄ ] was recovered from EtOAc/H₂O extraction of the product mixture, where the H₂O layer was worked up and dried for reuse in consecutive runs of the Pechmann condensation reactions, maintaining >85% conversion for four times. The catalytic reactions were also carried out in a microfluidic flow setup. The flow parameters, the reactant molar amounts, and the additional H₂SO₄ as a modifying acid catalyst were optimized in the current case study. A minimum conversion rate of 2.8 g/hr of coumarin derivatives was demonstrated.