The influence of modifying admixtures on the catalytic properties of the Ni<Subscript>3</Subscript>Al intermetallic compound in the conversion of methane with carbon dioxide

Catalytic systems based on the Ni₃Al intermetallic compound and modified with niobium and chromium were studied in methane reforming with carbon dioxide. The catalysts were prepared under self-propagating high-temperature synthesis conditions. The phase composition of the catalytic systems was studied by X-ray diffraction. The catalytic activity of the samples increased as the concentration of modifying admixtures decreased and was maximum at 2% concentrations of Nb and Cr. The scanning electron microscopy data showed that the catalytic systems experienced substantial structural changes, which caused catalytic activity loss with time.     

The kinetics and mechanism of mechanochemical dissolution of chromium in nickel

The regularities of the formation of a solid solution in a Ni-Cr(20 at %) system are studied using X-ray diffraction, optical microscopy, and particle-size distribution analysis within the framework of an energetical approach to the analysis of the kinetics of mechanochemical synthesis. It is established that the curves of the consumption of chromium atoms and the formation of the reaction product (a solid solution of chromium in nickel) coincide with each other. The rate-limiting step of the reaction is the formation of a contact surface between chromium and nickel, while the “stirring” of chromium atoms in nickel matrix has a very high rate. The rate of the formation of the contact surface in the mixture of brittle chromium and plastic nickel is determined by the rate of chromium particle disintegration. To a conversion of about 60%, the reaction kinetics is described by a quadratic dependence on the dose (D) of the mechanical treatment (N ～ D ₂).     

The modification of Ni<Subscript>3</Subscript>Al intermetallic compound with chromium and tungsten for carbon dioxide reforming of methane to synthesis gas

Catalytic systems based on the Ni₃Al intermetallic compound and modified with chromium and tungsten were studied in carbon dioxide reforming of methane. The catalysts were prepared by the self-propagating high-temperature synthesis method. The phase composition of the catalytic systems was determined by X-ray diffraction. The catalytic activity of the samples increased as the concentration of dopants decreased and was maximum at 2 wt % Cr and W. Scanning electron microscopy studies showed that the catalytic system underwent substantial structural changes responsible for catalytic activity loss with time.     

Influence of Method of Introduction of Cu- and Zn-Based Modifiers on the Properties of Chromia–Alumina Catalysts

Three methods of introduction of modifiers based on Cu and Zn compounds into the CrO_x/Al₂O₃ catalysts for dehydrogenation of light paraffin hydrocarbons are considered: Introduction from sol, introduction using successive impregnation technique and introduction of modifiers by impregnation along with precursor of chromium oxide. The obtained samples are studied by a complex of physical-chemical methods (XRD, UV-Vis spectroscopy, temperature-programmed reduction with hydrogen (TPR-H₂), X-ray fluorescent (XRF) spectrometry, low-temperature N₂ sorption). The catalytic properties of the samples are studied in kinetic mode in isobutane dehydrogenation. Cu- and Zn-modifiers are shown to influence on the peculiarities of reduction of Cr⁶⁺ and, hence, specify the state of active surface of CrO_x/Al₂O₃ catalysts formed in the reductive reaction medium. Not only do the states of modifiers influence on the initial activity of the catalyst, but also on its activity after oxidative regeneration. Introduction of modifiers by successive impregnation method results in formation of copper and zinc aluminates or defective spinels on the Al₂O₃ surface. When the active component is introduced, the modified surface of the support promotes formation and stabilization of Cr⁶⁺ sites that can undergo reversible reduction–oxidation and provide high activity and selectivity towards formation of isobutylene (>98%).     

Characterization of double oxide system Cu-Cr-O supported on <Emphasis Type="Italic">γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Series of alumina supported chromium-copper catalysts were prepared by co-impregnation method. The samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy and UV-visible diffuse reflectance spectroscopy. Dispersion and porosity was also obtained. The experimental and catalytic test results have drawn a conclusion that an interaction between copper and chromium ions takes place. This interaction is responsible for the enhanced catalytic activity of studied catalysts in reaction of total oxidation of industrial formaldehyde production exhaust gas, which contains CO, dimethyl ether and methanol as main components. The article is published in the original.     

Characterization of the Corrosion of Nanostructured 17-4 PH Stainless Steel by Surface Mechanical Attrition Treatment (SMAT)

Abstract

The corrosion properties of nanostructured 17-4PH stainless steel facilitated by a surface mechanical attrition treatment (SMAT) process were studied using electrochemical measurements in 0.6?M NaCl aqueous solution. The microstructure of the surface layer was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results demonstrated the formation of a nanostructured surface layer on the surface of the material. By the combination of SMAT and low-temperature annealing processes, the potentiodynamic polarization measurements and X-ray photoelectron spectroscopy (XPS) spectra demonstrated an improvement in the corrosion resistance of 17-4PH stainless steel with a reduced corrosion current density of 0.241?mA/cm² and a higher chromium content. The improved corrosion resistance may be attributed to the formation of nucleation sites through which chromium may freely move from the matrix to the upper surface and thereby form a protective oxide layer on the surface of the material.     

Determination of molybdenum, chromium and aluminium in human urine by electrothermal atomic absorption spectrometry using fast-programme methodology

Rapid and direct procedures for the determination of molybdenum, chromium and aluminium in human urine samples are developed. Fast-programme methodology is used to simplify the heating cycles. Hydrogen peroxide, nitric acid and Triton X-100 are added to the urine samples which are directly introduced into the furnace. For molybdenum, two successive injection steps are required due to the low level of this element in the samples analyzed. Calibration is carried out using aqueous standards for aluminium and the standard additions method for both molybdenum and chromium. The reliability of the procedures is checked by analyzing two certified reference materials.     

Speciation Determination of Chromium(VI) and Chromium(III) in Soil Samples after Cloud Point Extraction

Abstract

To measure the different activity of chromium(VI) and chromium(III) in soil samples, chromium(VI) and total chromium (CrVI + CrIII) was extracted by KCl extracting agent and alkali fusion, respectively. Cloud point extraction (CPE) for speciation determination of chromium with double-slotted quartz tube atom trap–flame atomic absorption spectrometry (STAT-FAAS) was developed. Preconcentration of chromium(VI) and total chromium in different pH solutions was achieved by CPE, with ammonium pyrrolidine dithiocarbamate (APDC) as the chelating agent and Triton X-114 as the cloud point extractant. The conditions of CPE and determination were studied. Under the optimal conditions, the enrichment factor was 50 for chromium from the initial 100-mL sample solution to the final 2-mL determined solution. Compared to the FAAS method, the sensitivity was improved seven-fold for chromium by the STAT-FAAS method. The limit of detection was 0.082 µg/L for chromium.     

XAS study on copper red in ancient glass beads from Thailand

Glass has been used in ornaments and decorations in Thailand for thousands of years, being discovered in several archeological sites and preserved in museums throughout the country. To date only a few of them have been examined by conventional methods for their compositions and colorations. In this work we report for the first time an advanced structural analysis of Thai ancient glass beads using synchrotron X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray (EDX) spectrometry. Four samples of ancient glass beads were selected from four different archeological sites in three southern provinces (Ranong, Krabi and Pang-nga) of Thailand. Archaeological dating indicated that they were made more than 1,300 years ago. A historically known method for obtaining a red color is to add compounds containing transition elements such as gold, copper, and chromium. For our samples, EDX spectrometry data revealed existing fractions of iron, copper, zinc, and chromium in ascending order. Thus, copper was selectively studied by XAS as being potentially responsible for the red color in the glass beads. K-shell X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) of copper were recorded in fluorescence mode using an advanced 13-element germanium detector. Comparisons with XANES spectra of reference compounds identified two major forms of copper, monovalent copper and a metallic cluster, dispersed in the glass matrix. The cluster dimension was approximated on the basis of structural modeling and a theoretical XANES calculation. As a complement, EXAFS spectra were analyzed to determine the first-shell coordination around copper. XAS was proven to be an outstanding, advanced technique that can be applied to study nondestructively archaeological objects to understand their characteristics and how they were produced in ancient times.     

Effect of temperature treatment on the interaction of nanotubular magnesium silicate Mg3Si2O5(OH)4 with titanium tetrachloride and water vapors

The modification of synthetic nanotubes of magnesium hydrosilicate with a chrysotile structure by successive treatment with titanium tetrachloride and water vapors was studied. The effect exerted by temperature of the preliminary anneal within 200?C500°C on the modification of a nanotubular matrix was determined by the thermogravimetric and chemical analyses, X-ray diffraction, and by the diffuse reflectance spectroscopy.     

X-ray fluorescence determination of the surface density of thin chromium and iron films using reference samples of elements with close atomic numbers

In X-ray fluorescence determinations of the surface density of thin chromium and iron films, we studied the possibility of using an approach based on the application of reference samples of elements with close atomic numbers. It was shown that the proposed diagnostic approach ensures the determination of the surface density of films with rather high precision.     

Continuous flow analysis: Photometric determination of Cr(III) with chrome Azurol S using microwave treatment

The effect of microwave and ultraviolet radiation and ultrasonic treatment on the reaction of chromium(III) with Chrome Azurol S, Arsenazo I, Alizarin, and Thoron was studied in the batch and flow modes. It was found that the reaction of chromium with the above photometric reagents is most efficiently activated by microwave radiation of the power 500-200 Wt. The best analytical properties were found for Chrome Azurol S. A flow system was proposed for the photometric determination of chromium(III) with Chrome Azurol S using microwave treatment. The throughput of the system is 68 samples per hour, the analytical range for chromium(III) is 0.03-60 mg/L. Na, K, Mg, Ca, Zn, Cd, Pb, C1^-, SO ₄ ^2- , NO_3/-, CH₃COO^- in 1000-fold amounts; Cu(II) and F^- in 500-fold amounts; Fe(III) in a 10-fold amount; and Cr(VI) in a sevenfold amount do not interfere with the determination of Cr(III). Procedures for the photometric determination of chromium under batch conditions were developed. The accuracy of the developed procedures was verified in the analysis of tanning agents and dyes for leather. Deceased.     

Determination of trace chromium(VI) in drinking water using X-ray fluorescence spectrometry after solid-phase extraction

A new, simple, and selective method for preconcentration and determination of Cr(VI) in aqueous samples. After adsorption in “batch mode” on Aliquat 336-AC, determinations were made directly on the solid by X-ray fluorescence spectrometry, which had the advantage of not requiring the step of elution of the chromium retained. The enrichment factor was calculated considering that the tablets obtained from 10 mL solution of Cr(VI) (1000 μg L^-1) had a final thickness of 0.64 mm and a diameter of 16.7 mm; the volume deposited on the pellet was 0.14 cm³. The preconcentration factor obtained was 71-fold, which was highly satisfactory for chromium trace analysis by XRF. Finally, the method was successfully applied to the determination of Cr(VI) in drinking water samples.     

Solvent extraction—atomic absorption determination of chromium(VI) in soils

The extraction of chromium(VI) from aqueous saline solutions (NaNO₃) using a trioctylamine solution in toluene was studied in order to determine chromium(VI) in soil samples by atomic absorption spectrometry. It was found that the quantitative recovery of chromium(VI) was attained after extraction with the 0.1 M extractant solution (pH 1.5) for 15 min followed by-back extraction with 4 M HNO₃. Chromium(III) was not extracted under these conditions     

Surface phenomena in conducting materials based on lanthanum chromite

The composition of the surface of a solid solution based on lanthanum chromite, La_0.975Ca_0.025·Cr_0.9Al_0.1O₃, and prepared by solid-phase synthesis followed by vacuum sintering and annealing in air was studied by X-ray photoelectron spectroscopy. The spectral line of chromium differs from the lanthanum line in the X-ray photoelectron spectrum in that the left wing of the chromium line is more gently sloping. The gentle slope of the line wing indicates that the given atom occurs in different charge states. For chromium, it appears possible to resolve the Cr³⁺ and Cr⁶⁺ bands in the X-ray photoelectron spectra, which allows estimation of the Cr³⁺ and Cr⁶⁺ concentrations.     

Flame atomic absorption spectrometric determination of trace chromium in various standard samples after preconcentration with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Chromium can be quantitatively retained as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)-tetraphenylborate(TPB) complex onto microcrystalline naphthalene in the pH range 4.8–5.9 from a large volume of aqueous solutions of various standard samples. After filtration, the solid mass consisting of the chromium complex and naphthalene was dissolved with 5 mL of dimethylformamide and the metal was determined by air-acetylene FAAS. A detection limit of ¶4 ng/mL for chromium was established. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of chromium in various standard alloys and biological samples.     

Separation of Cr(III) and Cr(VI) using complexation of Cr(III) with 8-hydroxyquinoline and determination of both species in waters by ETA-AAS

Summary A method for the determination of chromium(III) and (VI) species has been studied and applied to mineral water samples. The chromium(III) was chelated with 0.1 mol/l 8-hydroxyquinoline in methyl alcohol, extracted in isobutyl methyl ketone and determined by ETA-AAS. The effects of the pH, extraction and heating time and amounts of the reagents required for the extraction were studied. A method for the determination of total chromium was optimized too, and the chromium(VI) can be calculated. The precision, sensibility, accuracy, graphite furnace program and interferences for both methods were also investigated.     

Generation of chromioenamines by reduction of O-acetyloximes with chromium(II) and their application

Chromioenamines can be generated by treatment of O-acetyloximes with chromium(II) via two steps of one-electron reduction and successive isomerization, and the species react with aldehydes to give gamma-amino alcohols after reduction with LiAlH4.     

Ytterbium-Containing Magnesium–Aluminum Hydroxo Salts with a Hydrotalcite-Type Structure

A method is developed for inserting ytterbium into Mg–Al hydroxo salts that have a hydrotalcitetype layered structure, as well as for the chemical analyses of complex hydroxo salts containing ytterbium in various combinations with magnesium, aluminum, chromium, vanadium, molybdenum, and niobium. The formation conditions of these hydroxo salts have been studied by potentiometric titration, their samples have been prepared, and X-ray diffraction patterns recorded. The prepared hydroxo salt samples have been tested as precursors for oxide catalysts of oxidative dehydrogenation (ODH) of alkanes.     

离子液体[BMIM]PF6中铬的电沉积行为简

以一氯丁烷、N-甲基咪唑和KPF6为原料,合成了1-丁基-3-甲基咪唑六氟磷酸盐离子液体([BMIM]PF6),用红外光谱(IR)对产物进行了结构分析. 用循环伏安法测试该离子液体在85 ℃下的电化学窗口为4.7 V. 考察了[BMIM]PF6-Cr(Ⅲ)电解液的电化学行为,结果表明,在85 ℃下Cr(Ⅲ)的还原过程是受扩散控制的一步还原不可逆过程,Cr(Ⅲ)的传递系数α=0.023,阴极扩散系数D0=1.142×10-6 cm2/s. 在85 ℃和-1.5 V条件下,用恒电势法在铜片上电沉积Cr(Ⅲ),并通过扫描电子显微镜(SEM)观察了铜片上镀层的表面结构,发现该镀层呈颗粒状,且颗粒的体积随沉积时间的延长而增大. X射线能量色散谱(EDS) 和X射线粉末衍射(XRD)测试结果表明,该镀层为无定形的金属铬.