不锈钢支撑双层类脂膜离子传感器的电化学研究与应用

C60;分子器件;不锈钢支撑双层类脂膜离子传感器的电化学研究与应用     

Structure and electrochemistry of self-organized fullerene-lipid bilayer films

The unique properties of C(60)-bearing artificial lipids with three C(16) (lipid 1), C(14) (lipid 2), or C(12) (lipid 3) alkyl chains have been characterized by a variety of techniques, including (13)C NMR, UV/Vis, and FT-IR spectroscopies, differential scanning calorimetry (DSC), X-ray diffraction, and electrochemistry. The (13)C NMR and UV/Vis spectra show that the lipids 1-3 have a closed aziridine structure at a 6/6-ring junction of C(60). The DSC data reveal that cast films of 1 exhibit two endothermic peaks at temperature ranges of 35-40 degrees C (main transition) and 47-49 degrees C (subtransition) in air, water, and 0.5 M aqueous tetraethylammonium chloride solution, while cast films of 2 and 3 each display one endothermic peak at 50-57 degrees C. The results of temperature-dependent FT-IR and UV/Vis studies of cast films of 1-3, together with the above data, reveal that the main peak in the DSC thermogram of a film of 1 can be attributed to a typical phase transition as seen in lipid bilayer membranes, while the sub-endothermic peak seen with 1 and the peaks for 2 and 3 stem from a change in the orientation of the C(60) moieties. X-ray diffraction patterns of each of the cast films of 1-3 show a diffraction peak corresponding to the (001) plane, suggesting the formation of molecular bilayer membrane structures. Cyclic voltammograms and Osteryoung square-wave voltammograms obtained from cast films of 1-3 on basal plane pyrolytic graphite (BPG) electrodes show strong temperature dependences. Finally, the thermodynamics of the binding of nine different alkylammonium ions and two alkylphosphonium ions to the electrogenerated radical monoanions and dianions of 1-3 cast on electrodes is described.     

Passive transport of C60 fullerenes through a lipid membrane: a molecular dynamics simulation study

To investigate the implications of the unique properties of fullerenes on their interaction with and passive transport into lipid membranes, atomistic molecular dynamics simulations of a C60 fullerene in a fully hydrated di-myristoyl-phoshatidylcholine lipid membrane have been carried out. In these simulations the free energy and the diffusivity of the fullerene were obtained as a function of its position within the membrane. These properties were utilized to calculate the permeability of fullerenes through the lipid membrane. Simulations reveal that the free energy decreases as the fullerene passes from the aqueous phase, through the head group layer and into the hydrophobic core of the membrane. This decrease in free energy is not due to hydrophobic interactions but rather to stronger van der Waals (dispersion) interactions between the fullerene and the membrane compared to those between the fullerene and (bulk) water. It was found that there is no free energy barrier for transport of a fullerene from the aqueous phase into the lipid core of the membrane. In combination with strong partitioning of the fullerenes into the lipidic core of the membrane, this "barrierless" penetration results in an astonishingly large permeability of fullerenes through the lipid membrane, greater than observed for any other known penetrant. When the strength of the dispersion interactions between the fullerene and its surroundings is reduced in the simulations, thereby emulating a nanometer sized hydrophobic particle, a large free energy barrier for penetration of the head group layer emerges, indicating that the large permeability of fullerenes through lipid membranes is a result of their unique interaction with their surrounding medium.     

Influence of water in the lamellar rearrangement of internal wool lipids

Small angle X-ray scattering (SAXS) was applied to a new lipid model arrangement, which was achieved by concentrating or diluting internal wool lipid liposome suspensions in varying water concentrations. The influence of the water content in the lamellar structure of the internal wool lipids is compared with the lamellar structure of phosphatidylcholine bilayers present in the membranes of the living cells. The high increase in the lamellar distances with the water content indicates that large amounts of water can be retained in the lipid wool membrane in contrast to the case of phosphatidylcholine liposomes. A transition temperature between 40 and 50 degrees C tends to eliminate the ordered lamellar structure when more than 60% of water is present in the bilayer structure. This could account for the increase in the permeability of the wool fibres when these are soaked in water at temperatures exceeding 40 degrees C.     

Nitric oxide enhances the capacitance of self-assembled,supported bilayer lipid membranes

The effect of nitric oxide (NO) at biologically relevant concentrations on the electrochemical features of the membrane was investigated by cyclic voltammetry (CV) at self-assembled, stainless steel supported lipid bilayer membranes (s-BLMs) using a three-electrode system. The results showed that the membrane capacitance (C_m) of s-BLMs was dramatically enhanced by the presence of increasing NO concentration from 0 to 70 μM. For comparison, fullerene C₆₀ doped s-BLMs (C₆₀@s-BLMs) was also studied. The C_m of C₆₀@s-BLMs increased with NO concentration from 0 to 16 μM and gradually reached a plateau value when NO concentration was over 16 μM. We concluded that (i) NO accumulated inside lipid bilayer increases the C_m of s-BLMs, and (ii) C₆₀ inside s-BLMs changes the dielectric constant of lipid bilayer, thus reducing the effect of NO on the C_m of C₆₀@s-BLMs. This novel self-assembled lipid modified probe provides a simple yet interesting model to study the effect of NO on the electrical conductance of the membrane.     

NACE–ESI-MS/MS method for separation and characterization of phosphorylation and acylation isomers of lipid A

Lipid A represents a heterogeneous group of bacterial outer membrane phosphoglycolipids, which play a major role in the pathogenesis of Gram-negative sepsis. The number and position of phosphoryl and acyl groups in lipid A molecules are key structural determinants in their bioactivities. In this study, a NACE–ESI-MS/MS method was developed for the simultaneous analysis of lipid A isomers possessing a different degree of phosphorylation and acylation. Various C4’- and C1-monophosphorylated lipid A isobars, as well as acylation isomers, were baseline separated within 43 min in a separation medium of methanol/dichloromethane/triethylamine/acetic acid 60:40:1.08:0.36 (v/v/v/v). Both normal and reverse CE polarities could be applied for proper detection of the analytes owing to the combination of a suction effect caused by the nebulizer gas at the outlet end of the capillary and external pressure applied on the inlet vial. The separated lipid A species could be identified unequivocally by their characteristic fragmentation patterns through CID performed in both negative- and positive-ionization modes. The uniqueness of the NACE–ESI-MS/MS method lies in its simplicity and reliability for proving the phosphorylation isomerism (C1 or C4’) and acylation pattern of native lipid A species or those designed for therapeutic applications.     

Interaction of hexadecylbetainate chloride with biological relevant lipids

The present work investigates the interaction of hexadecylbetainate chloride (C(16)BC), a glycine betaine-based ester with palmitoyl-oleoyl-phosphatidylcholine (POPC), sphingomyelin (SM), and cholesterol (CHOL), three biological relevant lipids present in the outer leaflet of the mammalian plasma membrane. The binding affinity and the mixing behavior between the lipids and C(16)BC are discussed based on experimental (isothermal titration calorimetry (ITC) and Langmuir film balance) and molecular modeling studies. The results show that the interaction between C(16)BC and each lipid is thermodynamically favorable and does not affect the integrity of the lipid vesicles. The primary adsorption of C(16)BC into the lipid film is mainly governed by a hydrophobic effect. Once C(16)BC is inserted in the lipid film, the polar component of the interaction energy between C(16)BC and the lipid becomes predominant. Presence of CHOL increases the affinity of C(16)BC for membrane. This result can be explained by the optimal matching between C(16)BC and CHOL within the film rather by a change of membrane fluidity due to the presence of CHOL. The interaction between C(16)BC and SM is also favorable and gives rise to highly stable monolayers probably due to hydrogen bonds between their hydrophilic groups. The interaction of C(16)BC with POPC is less favorable but does not destabilize the mixed monolayer from a thermodynamic point of view. Interestingly, for all the monolayers investigated, the exclusion surface pressures are above the presumed lateral pressure of the plasma membranes suggesting that C(16)BC would be able to penetrate into mammalian plasma membranes in vivo. These results may serve as a useful basis in understanding the interaction of C(16)BC with real membranes.     

MEMBRANE DAMAGE IN UV-IRRADIATED LENSES

Abstract The purpose of this study was to investigate three possible causes of membrane damage following UV irradiation: photooxidation of membrane thiol (SH) groups, peroxidation of membrane lipids and inhibited synthesis of membrane proteins. Thiol loss was not observed. Thin-layer chromatography showed a four-fold increase in several primary lipid peroxidation products such as hydroperoxyl lipids in the epithelial membrane preparations isolated from irradiated lenses. The formation of new hydroxyl lipid bands not seen in control preparations was also observed in isolated membranes from irradiated lenses. Irradiation in the presence or absence of oxygen produced lipid peroxidation products. Aerobic irradiation produced small, but statistically significant increases in lipid hydroxyls and hydroperoxyls relative to controls. Repair of initial damage might be compromised by the observed 60% reduction in rate of protein synthesis measured in lens membranes following irradiation. Synthesis was affected by means other than depleted potassium or elevated calcium levels.     

Characterization and Quantification of Nanoparticle-Antibody Conjugates on Cells Using C(60) ToF SIMS in the Event-By-Event Bombardment/Detection Mode

Cluster C(60) ToF-SIMS (time-of-flight secondary ion mass spectrometry) operated in the event-by-event bombardment-detection method has been applied to: a) quantify the binding density of Au nanoparticles (AuNPs)-antiCD4 conjugates on the cell surface; b) identify the binding sites between AuNPs and antibody. Briefly, our method consists of recording the secondary ions, SIs, individually emitted from a single C(60) (1,2+) impact. From the cumulative mass spectral data we selected events where a specific SI was detected. The selected records revealed the SIs co-ejected from the nanovolume impacted by an individual C(60) with an emission area of ~ 10nm in diameter as an emission depth of 5-10 nm. The fractional coverage is obtained as the ratio of the effective number of projectile impacts on a specified sampling area (N(e)) to the total number of impacts (N(0)). In the negative ion mass spectrum, the palmitate (C(16)H(31)O(2) (-)) and oletate (C(18)H(33)O(2) (-)) fatty acid ions present signals from lipid membrane of the cells. The signals at m/z 197 (Au(-)) and 223 (AuCN(-)) originate from the AuNPs labeled antibodies (antiCD4) bound to the cell surface antigens. The characteristic amino acid ions validate the presence of antiCD4. A coincidence mass spectrum extracted with ion at m/z 223 (AuCN(-)) reveals the presence of cysteine at m/z 120, documenting the closeness of cysteine and the AuNP. Their proximity suggests that the binding site for AuNP on the antibody is the sulfur-terminal cysteine. The fractional coverage of membrane lipid was determined to be ~23% of the cell surfaces while the AuNPs was found to be ~21%. The novel method can be implemented on smaller size NPs, it should thus be applicable for studies on size dependent binding of NP-antibody conjugates.     

Efficient photocleavage of DNA utilising water-soluble lipid membrane-incorporated [60]fullerenes prepared using a [60]fullerene exchange method

Various types of lipid membrane-incorporated C60 with high C60 concentrations can be prepared easily in several hours using the C60 exchange method and the photocleaving activity of cationic lipid membrane-incorporated C60 was appreciably higher than that of the C60.gamma-CDx complex.     

Stabilized Lipid Membrane Based Biosensors with Incorporated Enzyme for Repetitive Uses

This work reports a technique for the stabilization of lipid membrane based biosensors with incorporated enzyme that retains its activity for repetitive uses. Microporous filters composed of glass fibers were used as supports for the stabilization of these sensors. The lipid film is formed on the filter by polymerization using UV (ultraviolet) radiation prior its use. Methacrylic acid was the functional monomer, ethylene glycol dimethacrylate was the crosslinker and 2,2′‐azobis‐(2‐methylpropionitrile) was the initiator. The enzyme (acetylcholinesterase) is incorporated within this mixture prior to polymerization. The polymerization process takes place by using UV irradiation instead of heating at 60 °C the lipid mixture because this temperature might denature the enzyme. This method for preparation of stabilized lipid membranes was investigated using Raman spectroscopy. The results have indicated that the kinetics of polymerization are completed within 4 hours. The retain in activity of the enzyme was studied using electrochemical experiments which have shown that this mild technique of polymerization can now be used to incorporate a protein in these lipid membranes without loss of their activity. This will allow the practical use of the techniques for chemical sensing based on lipid membranes based biosensors and commercialization of these devices.     

Electron paramagnetic resonance study of amphiphiles partitioning behavior in desiccation-tolerant moss during dehydration

Desiccation tolerance is a crucial characteristic for desert moss surviving in arid regions. Desiccation procedure always induces amphiphiles transferring from the polar cytoplasm into lipid bodies. The behavior of amphiphiles transferring can contribute to the enhancement of desiccation tolerance and the reduction of plasma membrane integrity simultaneously. The effects of amphiphiles partitioning into the lipid phase during water loss has been studied for pollen and seeds using electron paramagnetic resonance (EPR) spectroscopy. However, desiccation-tolerant high plants occur among mosses, several angiosperms and higher plants seeds or pollens. They have different strategies for survival in dehydration and rehydration. A desiccation-tolerant moss Tortula desertorum was used to investigate the behaviors of amphiphilic molecules during drying by spin label technology. There are small amount of amphiphilic probes partitioning into membrane during moss leaves dehydration, comparing with that in higher plants. Cytoplasm viscosity changed from 1.14 into glass state only dehydration less than 60 min. Moss leaves lost plasma membrane integrity slightly, from 0.115 to 0.237, occurred simultaneously with amphiphiles partition. The results showed the more advantages of mosses than higher plants in adapting fast dehydration. We propose that EPR spin label is feasible for studying the amphiphiles partitioning mechanisms in membrane protection and damage for desiccation-tolerant mosses.     

Spin label studies on rat liver and heart plasma membranes: effects of temperature, calcium, and lanthanum on membrane fluidity.

The structures of rat liver and heart plasma membranes were studied with the 5-nitroxide stearic acid spin probe, I(12,3). The polarity-corrected order parameters (S) of liver and heart plasma membranes were independent of probe concentration only if experimentally determined low I(12,3)/lipid ratios were employed. At higher probe/lipid ratios, the order parameters of both membrane systems decreased with increasing probe concentration, and these effects were attributed to enhanced nitroxide radical interactions. Examination of the temperature dependence of approximate and polarity-corrected order parameters indicated that lipid phase separations occur in liver (between 19 degrees and 28 degrees C) and heart (between 21 degrees and 32 degrees C) plasma membranes. The possibility that a wide variety of membrane-associated functions may be influenced by these thermotropic phase separations is considered. Addition of 3.9 mM CaCl2 to I(12,3)-labeled liver plasma membrane decreased the fluidity as indicated by a 5% increase in S at 37 degrees C. Similarly, titrating I(12,3)-labeled heart plasma membranes with either CaCl2 or LaCl3 decreased the lipid fluidity at 37 degrees C, although the magnitude of the La3+ effect was larger and occurred at lower concentrations than that induced by Ca2+; addition of 0.2 mM La3+ or 3.2 mM Ca2+ increased S by approximately 7% and 5%, respectively. The above cation effects reflected only alterations in the membrane fluidity and were not due to changes in probe--probe interactions. Ca2+ and La3+ at these concentrations decrease the activities of such plasma membrane enzymes as Na+, K+-ATPase and adenylyl cyclase, and it is suggested that the inhibition of these enzymes may be due in part to cation-mediated decreases in the lipid fluidity.     

Ion Channel Behavior of a Supported Bilayer Lipid Membrane Composed of 5,5-Ditetradecyl-2-(2-trimethyl-ammonioethyl)-1,3-dioxane Bromide Modified Glassy Carbon Electrode

A synthetic cationic surfactant, 5, 5-ditetradecyl-2-(2-trimethyl-ammonioethyl)-1, 3-dioxane bromide (DTDB), was used toconstruct a supported bilayer lipid membrane (s-BLM) coatedon an underlying glassy carbon electrode (GCE). Electrochem-ical impedance spectroscopy (EIS), small-angle X-ray diffrac-tion (SAXD) and cyclic voltammetry were used to characterizethe s-BLM. Both EIS and SAXD data indicated that the syn-thetic lipid exists as a well-oriented bilayer in the membrane.     

Lipid modification of proteins through sortase-catalyzed transpeptidation

A general chemoenzymatic method for the site-specific attachment of lipids to protein substrates is described. Sortase A is used to append short lipid-modified oligoglycine peptides to the C terminus of protein substrates bearing a five amino acid sortase A recognition sequence (LPETG). We demonstrate the attachment of a range of hydrophobic modifications in excellent yield (60-90%), including a simple step for removing the sortase enzyme postreaction. Lipoproteins prepared using these procedures were subsequently shown to associate with mammalian cells in a lipid tail-dependent fashion and localized to the plasma membrane and endosomes.     

Structural effects of a basic peptide on the organization of dipalmitoylphosphatidylcholine/dipalmitoylphosphatidylserine membranes: a fluorescent resonance energy transfer study

We studied the effect of a model basic peptide, hexalysiltryptophan, on the organization of dipalmitoylphosphatidylcholine/dipalmitoylphosphatidylserine unilamellar vesicles by means of fluorescent resonance energy transfer (FRET) between fluorescently labeled phospholipids. Several FRET theoretical models assuming different bilayer geometries and probe distributions were fitted to the time-resolved data. The experiments were carried out at two temperatures in different regions of the lipid mixture phase diagram. At 45 degrees C, the expected gel/fluid phase separation was verified by model fitting in peptide-free vesicles, which from the FRET approach means that domains are larger than approximately 200 A. No noticeable alteration of membrane organization was detected upon increasing the peptide concentration. At variance, for the single fluid phase at 60 degrees C, there was a large increase in FRET efficiency upon peptide addition to the lipid vesicles, mainly caused by peptide-induced vesicle aggregation. The system gradually changed from unilamellar lipid vesicles to a multibilayer geometry, and a limit lamellar repeat distance of approximately 57 A was recovered. Furthermore, no evidence for lateral domain formation on the FRET length scale was found at this temperature, the cationic peptide being only able to induce local lipid demixing, causing a short-range sequestration of 2-3 acidic lipids around each surface-adsorbed peptide.     

Phase structures of a hydrated anionic phospholipid composition containing cationic dendrimers and pegylated lipids

The effect of 4th generation poly(amidoamine) dendrimer (4G PAMAM) present in an anionic phospholipid composition, consisting of hydrogenated soyphosphatidylcholine (HSPC), cholesterol (CH), dicetyl phosphate (DCP), and poly(ethylene glycol) (Mw approximately 2000) derivatized phosphatidylethanolamine (PEG2000-PE), on the hydration and liquid crystalline structure formation was investigated. The optical and polarized light microscopies of the liposomal dispersion obtained from the hydrated lipid composition show two types of birefringent structures (mesophases): plastic, wormlike microstructures and conventional, over-elongated lamellae. Differential scanning calorimetry (DSC) shows an increase in the liquid crystalline phase transition (Tg) of the lipid composition from 60 to 94 degrees C with increasing 4G PAMAM concentrations from 0 to 0.011 mM, respectively. The Tg values of the two microstructures were 68 and 84 degrees C, respectively, indicating that the plastic microstructures were 4G PAMAM/DCP-complexes-rich (alpha mesophases) and the conventional and elongated lamellae were dendrimer-doped HSPC/CH-rich microstructures (beta mesophases). Optical microscopy shows that the alpha mesophases convert into various other types of vesicular structures such as giant unilamellar vesicles and biliquid foams, upon heating above the phase transition temperature of the lipid composition (approximately 60-65 degrees C). The microstructure transformation is a result of an osmotic influx of water and the detergent action of PEG2000-PE present in the lipid composition. The transmission electron microscopy (TEM) images of the liposomal dispersion show particles embedding circular transparent domains that exactly correlate to the theoretical 4G PAMAM/DCP complex sizes, thus, providing evidence of 4G PAMAM interspersed within the two mesophases. Small-angle X-ray scattering (SAXS) measurements indicate that the alpha mesophases are a dendrimer-interlinked, symmetrically undulated lamellar phase and the beta mesophases are dendrimer-doped, occasionally kinked lamellae. An increase in dendrimer concentration in the lipid composition was found to decrease interlamellar spacing. On the basis of optical microscopy, DSC, TEM, and SAXS data, a model of dendrimer-doped mesophase structure and lamellae fusion is proposed. This investigation provides new self-assembled materials for drug/gene delivery and supplements the understanding of mechanisms involved in various biological processes such as membrane fusion, transmembrane permeation, and endocytosis.     

Effect of temperature and humidity on coarsening behavior of Au nanoparticles embedded in liquid crystalline lipid membrane

Coarsening behavior of the Au nanoparticles produced by thermal evaporation of Au onto a liquid crystalline lipid (1,2-dioleoyl-3-trimethylammonium-propane, DOTAP) membrane was investigated by subjecting the nanoparticle-embedded DOTAP membrane to two different annealing conditions (at 100 °C under no humidity and at 20 °C and 80% relative humidity). Although the coarsening rate was relatively slow because of the low temperature (from 5.6 nm in the as-deposited state to ~7 nm after 30 h), it was identified that at 100 °C without humidity the Au nanoparticles resulted in shape refinement whereas the high humidity at 20 °C induced self-organization of the nanoparticles into a monolayer. It was also found that annealing in both cases tended to segregate the lipid molecules from the nanoparticle array and forced the nanoparticles into a tighter area. In the case of the high-humidity sample, the lipid segregation eventually led to extensive coalescence of the Au nanoparticles.     

Phase Behavior of a Designed Cyclopropyl Analogue of Monoolein: Implications for Low‐Temperature Membrane Protein Crystallization

Lipidic cubic phases (LCPs) are used in areas ranging from membrane biology to biodevices. Because some membrane proteins are notoriously unstable at room temperature, and available LCPs undergo transformation to lamellar phases at low temperatures, development of stable low‐temperature LCPs for biophysical studies of membrane proteins is called for. Monodihydrosterculin (MDS) is a designer lipid based on monoolein (MO) with a configurationally restricted cyclopropyl ring replacing the olefin. Small‐angle X‐ray scattering (SAXS) analyses revealed a phase diagram for MDS lacking the high‐temperature, highly curved reverse hexagonal phase typical for MO, and extending the cubic phase boundary to lower temperature, thereby establishing the relationship between lipid molecular structure and mesophase behavior. The use of MDS as a new material for LCP‐based membrane protein crystallization at low temperature was demonstrated by crystallizing bacteriorhodopsin at 20 °C as well as 4 °C.     

Origin of chlorophyll fluorescence in plants at 55-75 degrees C

The origin of heat-induced chlorophyll fluorescence rise that appears at about 55-60 degrees C during linear heating of leaves, chloroplasts or thylakoids (especially with a reduced content of grana thylakoids) was studied. This fluorescence rise was earlier attributed to photosystem I (PSI) emission. Our data show that the fluorescence rise originates from chlorophyll a (Chl a) molecules released from chlorophyll-containing protein complexes denaturing at 55-60 degrees C. This conclusion results mainly from Chl a fluorescence lifetime measurements with barley leaves of different Chl a content and absorption and emission spectra measurements with barley leaves preheated to selected temperatures. These data, supported by measurements of liposomes with different Chl a/lipid ratios, suggest that the released Chl a is dissolved in lipids of thylakoid membranes and that with increasing Chl a content in the lipid phase, the released Chl a tends to form low-fluorescing aggregates. This is probably the reason for the suppressed fluorescence rise at 55-60 degrees C and the decreasing fluorescence course at 60-75 degrees C, which are observable during linear heating of plant material with a high Chl a/lipid ratio (e.g. green leaves, grana thylakoids, isolated PSII particles).