杂多酸修饰的电极对于甲醇电氧化的促进作用

采用杂多酸修饰光滑铂电极,研究其对甲醇电催化氧化的作用,发现与未修饰光滑铂电极相比,分别经磷钨酸和硅钨酸修饰的电极上甲醇电催化氧化速率明显增加.     

球型Pt微粒电极的构建及其对甲醇电氧化的研究

以镍铬合金为基体,在其表面电化学沉积制备了Pt微粒电极,用扫描电子显微镜（SEM）对电极的表面形貌进行了表征,电化学方法考察了电极的电化学性能和甲醇在该电极上的电催化行为．结果表明镍铬合金表面沉积的球型Pt微粒电极对甲醇的电氧化具有良好的催化活性,相同实验条件下,该电极的催化活性比纯Pt电极高30倍．该电极对甲醇的电氧化显示出较高的催化性能．     

Die elektrochemische oxidation aliphatischer nitroxyl-radikale

The electrochemical oxidation of seven different nitroxyl radicals has been investigated in acetonitrile at a platinum electrode. Cyclic and bicyclic nitroxyls are oxidized in a reversible one-electron-step to the corresponding oxammonium ions. From oxidation and ionization potentials the electrostatic solvation enthalpies of two oxammonium ions were calculated. The ionization potentials of the remaining compounds could be estimated. Heterogenous rate constants of the electrode reaction have been determined.     

Electrooxidation of methanol on upd-Ru and upd-Sn modified Pt electrodes

The electrochemical oxidation of methanol has been investigated on underpotentially deposited-ruthenium-modified platinum electrode (upd-Ru/Pt) and on underpotentially deposited-tin-modified platinum electrode (upd-Sn/Pt). The submonolayers of upd-Ru and upd-Sn on a Pt electrode increased the rate of methanol electrooxidation several times as large as that on a pure Pt electrode. The best performance for methanol electrooxidation was obtained on a ternary platinum based catalyst modified by upd-Ru and upd-Sn simultaneously. The influence of the submonolayers of upd-Ru adatoms and upd-Sn adatoms on the oxidation of methanol in acid has been investigated. The effect of Ru on methanol electrooxidation lies on the distribution of Ru adatoms on a Pt surface. It has been shown that as long as the amount of upd-Ru deposits were controlled in a proper range, upd-Ru deposits would enhance the methanol oxidation obtained on a Pt electrode at whichever deposition potential the upd-Ru deposits were obtained. The effects of tin are sensible to the potential range. The enhancement effect of upd-Sn adatoms for the oxidation of methanol will disappear as the electrode potential is beyond a certain value. It is speculated that there exists a synergetic effect on the Pt electrode as adatoms Ru and Sn participate simultaneously in the methanol oxidation.     

Electrocatalytic oxidation of methanol onto platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) film

In this work, platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) modified glassy carbon electrode (Pt/Nano-PDAN/MGCE) is prepared. The composite catalysts are characterized by scanning electron microscopy, energy dispersive spectroscopy, and electrochemical methods. The electrochemical methanol oxidation reaction is studied at the surface of this modified electrode. At same Pt loading, the Pt/Nano-PDAN/MGCE can act as higher efficient catalyst for methanol oxidation than that Pt/MGCE. Then, the influence of some parameters such as potential scan rates, switching potential, and methanol concentration on its oxidation as well as long-term stability of the modified electrode have studied by electrochemical methods. Also, ability of the modified electrode toward electrocatalytic oxidation of formaldehyde as an intermediate in methanol oxidation has been investigated.     

甲醇在欠电位沉积Sn/Pt电极上催化氧化

在欠电位沉积（upd）锡修饰的铂电极（upd-Sn/Pt）上,对甲醇电化学催化氧化过程进行了研究.发现当Pt表面upd-Sn的覆盖率在20％附近时,对甲醇的催化氧化的增强作用最为明显；在电位低于0.35 V （vs RHE）时,甲醇在Pt与upd-Sn/Pt电极上氧化只进行到脱氢生成CO的步骤;在0.35 V以后,表面Sn－OH形成,反应Sn－OH＋COads=Sn＋CO2＋H＋＋e有利于表面CO的去除;而Pt电极上,只有0.6 V以后,才有反应Pt－OH＋COads=Pt＋CO2＋H＋＋e发生.因此,Sn的存在有利于甲醇在较低的电位下氧化; Pt电极上CH3OH脱氢并释放出电子的过程是一个快速的过程,表面CO的去除是甲醇氧化过程的控制步骤;甲醇氧化产生的表面吸附态CO 以线式吸附为主,少量的桥式吸附态CO在反应初期即达到吸附饱和; Pt表面上upd-Sn表现的催化增强作用,在光亮铂电极和在高分散铂黑电极上是一致的.     

甲酸在铂电极上吸附氧化机理研究

用时间分辨石英晶体微天平（Ｔｉｍｅ－ｒｅｓｏｌｖｅｄ ＥＱＣＭ）、循环伏安法及电化学阶跃技术,研究了铂电极上甲酸的吸附氧化过程。结果表明,在活性吸附氧化过程中,甲酸吸附后迅速失去一个电子形成ＣＯＯＨａｄ单分子层,在阶跃电势计时电流图上得到一个氧化电流峰及ＥＱＣＭ图上一个相应的质量增加,随后的ＣＯＯＨａｄ氧化是一个速率较慢的过程,当它的吸附达到稳成以后,甲酸氧化反应在计时电流图上表现为稳态小电流及相     

Surface metal modifiers for methanol electrooxidation on platinum; silver and mercury

The catalytic activity of platinum surfaces towards methanol electrooxidation can be modified by the deposition of a second metal using different methodologies. There is little information about the catalytic performance of polycrystalline platinum modified by silver and mercury adatoms using spontaneous and electrochemical deposition methods. Cyclic voltammetrics have been performed to compare the current vs potential profiles of modified platinum surfaces in acid solution at room temperature. The inhibition of the hydrogen adatom voltammetric profile by foreign metal adatoms on platinum was used to calculate the degree of surface coverage by the metal. Poisoning effects were checked by anodic stripping experiments of methanol residues on the modified platinum surfaces at adsorption potentials in the hydrogen electrosorption region using a micro flux cell. Methanol solution oxidation was also evaluated at slow scan rates of up to 0.8 vs reversible hydrogen electrode (RHE) on the platinum-modified surfaces. The comparison between the amounts of carbon-monoxide-type residues and the solution oxidation of methanol was analysed to check for their utility as catalytic surfaces for direct methanol fuel cells. Dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Platinum/Carbon nanotube nanocomposite synthesized in supercritical fluid as electrocatalysts for low-temperature fuel cells

Carbon nanotube (CNT)-supported Pt nanoparticle catalysts have been synthesized in supercritical carbon dioxide (scCO(2)) using platinum(II) acetylacetonate as metal precursor. The structure of the catalysts has been characterized with transmission electron micrograph (TEM) and X-ray photoelectron spectroscopy (XPS). TEM images show that the platinum particles' size is in the range of 5-10 nm. XPS analysis indicates the presence of zero-valence platinum. The Pt-CNT exhibited high catalytic activity both for methanol oxidation and oxygen reduction reaction. The higher catalytic activity has been attributed to the large surface area of carbon nanotubes and the decrease in the overpotential for methanol oxidation and oxygen reduction reaction. Cyclic voltammetric measurements at different scan rates showed that the oxygen reduction reaction at the Pt-CNT electrode is a diffusion-controlled process. Analysis of the electrode kinetics using Tafel plot suggests that Pt-CNT from scCO(2) provides a strong electrocatalytic activity for oxygen reduction reaction. For the methanol oxidation reaction, a high ratio of forward anodic peak current to reverse anodic peak current was observed at room temperature, which implies good oxidation of methanol to carbon dioxide on the Pt-CNT electrode. This work demonstrates that Pt-CNT nanocomposites synthesized in supercritical carbon dioxide are effective electrocatalysts for low-temperature fuel cells.     

乙醇在不同介质中电氧化的原位表面增强拉曼光谱研究

采用常规电化学伏安技术和电化学原位表面增强拉曼光谱(in-situ SERS)技术研究了不同介质中乙醇在粗糙铂电极上的电催化氧化行为. 发现不论在酸性、中性还是碱性介质中, 乙醇均能在粗糙铂电极上自发氧化解离生成强吸附中间体CO; 碱性介质中, CO在粗糙铂电极上基本氧化完全的电位(0.20 V)比中性和酸性介质中(0.50 V)负移了约0.30 V. 而乙醇在粗糙铂电极上CV正向扫描的氧化峰电位(-0.20 V)比酸性介质中(0.65 V)负移了约0.85 V. 比较不同介质中乙醇和CO在粗糙铂电极上的氧化峰电流和峰电位可以发现, 粗糙铂电极在碱性介质中对乙醇和CO的电催化氧化活性比中性和酸性介质中更强; 可以推测, 不论在酸性、中性还是碱性介质中, 乙醇在粗糙铂电极上的氧化过程均按双途径机理进行.     

Neutral red as electron transfer mediator: enhanced electrocatalytic activity of platinum catalyst for methanol electro-oxidation

Organic molecule neutral red (NR), as electron transfer mediator, was introduced in the anodic electrocatalyst system for methanol oxidation and the resulting electrode was investigated by cyclic voltammetry, polarization method, and electrochemical impedance spectroscopy. For the same loading mass of platinum catalyst, 1.25 times larger exchange current density, 1.83 times higher specific activity, and better long-term cycle stability can be obtained at Pt/NR/graphite electrode, as compared to the electrode without NR. These results indicate that neutral red plays an important role on the enhanced electrocatalytic activity of platinum catalyst for methanol oxidation.     

肾上腺素电化学氧化生成肾上腺素红反应机理的薄层光谱电化学研究

应用长光程薄层电解池(石墨电极和铂片电极),使用循环伏安法(CV)和单电位阶跃计时吸收法(SPS/CA),研究了肾上腺在pH=2.5～7.0的McIlvaine缓冲溶液中电氧化生成肾上腺素红的反应机理,测定了表观速率常数kobs.结果表明:溶液pH值对肾上腺素的电氧化反应有很大影响,肾上腺素生成肾上腺素红的kobs随溶液pH值的增加而增大.     

Determination of tocopherols by reverse-phase liquid chromatography and electrochemical detection at a surface-oxide modified platinum microelectrode, without added electrolyte

The reverse-phase separation and electrochemical detection of alpha-, gg-, and delta-tocopherol at a potential of +0.90 V vs. a gold pseudo-reference electrode is possible down to 10(-7)M concentrations, with surface-modified platinum microdisc electrodes in a methanol/water (95:5) solvent mixture. The use of microclectrodes with radii of 10-70 mum, rather than electrodes of conventional size, minimizes problems associated with iR drop and obviates the need for deliberately added electrolyte. These features simplify the analytical procedure. The background response of an untreated platinum microelectrode in the methanol/water (95:5) system at positive potentials is characterized by processes arising from adsorption/oxidation of methanol and formation of surface oxides. Amperometric detection is of little use under these conditions. However, preoxidation of the electrode surface in 2M nitric acid inhibits the methanol adsorption/oxidation reaction but not the tocopherol response and therefore allows highly sensitive amperometric detection.     

Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.     

Scanning electrochemical mapping of spatially localized electrochemical reactions induced by surface potential gradients

The influence of a surface potential gradient on the location and extent of electrochemical reactions was examined using a scanning electrochemical microscope. A linear potential gradient was imposed on the surface of a platinum-coated indium tin oxide electrode by applying two different potential values at the edges of the electrode. The applied potentials were used to control the location and extent of several electrochemical reactions, including the oxidation of Ru(NH3)6(2+), the oxidation of H2, and the oxidation of H2 in the presence of adsorbed CO. Scanning electrochemical mapping of these reactions was achieved by probing the feedback current associated with the oxidation products. The oxidation of Ru(NH3)6(2+) occurred at locations where the applied potential was positive of the formal potential of the Ru(NH3)6(2+/3+) redox couple. The position of this reaction on the surface could be spatially translated by manipulating the terminal potentials. The rate of hydrogen oxidation on the platinum-coated electrode varied spatially in the presence of a potential gradient and correlated with the nature of the electrode surface. High oxidation rates occurred at low potentials, with decreasing rates observed as the potential increased to values where platinum oxides formed. The extent of oxide formation versus position was confirmed with in-situ ellipsometry mapping. In the presence of adsorbed carbon monoxide, a potential gradient created a localized region of high activity for hydrogen oxidation at potentials between where carbon monoxide was adsorbed and platinum oxides formed. The position of this localized region of activity could be readily translated along the surface by changing the terminal potential values. The ability to manipulate electrochemical reactions spatially on a surface has potential application in microscale analytical devices as well as in the discovery and analysis of electrocatalytic systems.     

Preparation and Properties of Composite Polypyrrole/Pt Catalyst Systems

Three different methods for the preparation and modification of conducting polymer/noble metal catalyst systems consisting of polypyrrole (PPy) and platinum (Pt) are described for the anodic oxidation of methanol. The first method consists of the electrochemical deposition of a thin PPy film on glassy carbon substrate, which is modified with Pt either by electroreduction of hexachloroplatinate, codeposition from a nanodispersed Pt solution, or incorporation of tetrachloroplatinate as counterion followed by cathodic reduction. A second method is based on the preparation of nanoscale PPy(PSS) particles by chemical polymerization with polystyrenesulfonate PSS^– as the counterion. This material is a favorable catalyst support for nanodispersed Pt due to its mixed electronic and cationic conductivity. To study the electrochemical properties, the particulate system PPy(PSS)/Pt is fixed in a carbon fiber electrode. A third method was developed which brings the polypyrrole in close contact to a proton exchanger membrane (Nafion) using a special chemical deposition procedure. This method is useful for preparing a membrane electrode assembly (MEA) consisting of Nafion/PPy/Pt. The structural, morphological, and electrocatalytic properties for methanol oxidation were studied depending on the preparation method applied using surface analytical techniques (TEM, SEM, and EDX) and electrochemical measurements (cyclic voltammetry and transient techniques).     

抗坏血酸在铂纳米粒子/碳纳米管/聚吡咯复合修饰电极上的电化学行为

研究了抗坏血酸在铂纳米粒子/碳纳米管/聚吡咯复合膜修饰电极上的电化学行为,发现复合修饰电极对抗坏血酸的电化学反应具有较好的电催化作用,与空白电极相比电化学氧化电流增加了7倍。用电化学阻抗谱研究了电子在修饰电极界面上的传输过程,发现修饰电极的电催化性能与修饰电极可以提高界面电子传输能力是相关的。同时研究了碳纳米管用量、支持电解质、扫速、电沉积条件等因素对抗坏血酸在修饰电极上电化学行为的影响。     

A new electrocatalytic mechanism for the oxidation of phenols at platinum electrodes

Electrochemical oxidation of phenolic compounds generally produces unstable phenoxy radicals that readily polymerize to passivate the surface of solid electrodes. In this study, the electrocatalytic oxidation of phenol in the presence and absence of methanol was investigated by cyclic voltammetry on a platinum electrode. The cyclic voltammogram of phenol in a mixture of phosphate buffer/methanol solution showed well-defined peaks at ∼600 mV vs. Ag/AgCl reference electrode, which surprising, gradually increased with repetitive scanning, stabilizing after 50 cycles. This unexpected behavior is in contrast to previous studies involving phenolic compounds, which always show a decrease in intensity during continuous potential scanning. Scanning electrochemical spectroscopy (SEM) was further used to investigate the changes in the surface morphology of the Pt electrode after electrodeposition. A new electrocatalytic mechanism for phenol oxidation on the surface of a Pt electrode is suggested in the presence of methanol. The proposed mechanism is based on the formation of a film of Pt oxide/hydroxides onto which the phenol and the products of its electrochemical oxidation are further deposited. The mechanism was also studied using more complex phenolic compounds including resveratrol, quercetin and bisphenol A. The results emphasized the effect of aryl substituents on the electrochemistry of this particular class of compounds.     

Degradation of the Pt-MoO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> composite catalyst in methanol solutions

Pt-MoO _x deposits synthesized by an electrochemical method are shown to be instable in methanol solutions at potentials ≥0.3 V. It is assumed that molybdenum oxides in the deposit composition react with methanol. The reduction of molybdenum compounds with methanol to form soluble Mo(+3) complexes in the presence of platinum is confirmed by spectrophotometric data. The MoO _x reaction with methanol leads to the removal of molybdenum compounds from the electrode surface, which is accompanied by the loss of its catalytic activity in the methanol oxidation reaction.     

Nickel modified ionic liquid/carbon paste electrode for highly efficient electrocatalytic oxidation of methanol in alkaline medium

In this study, the electrocatalytic oxidation of methanol at nickel modified ionic liquid/carbon paste electrode (Ni/IL/CPE) in alkaline medium is presented. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, is incorporated into the electrode as a binder. Electrochemical impedance spectroscopy is employed to evaluate the electron transfer rate of this electrode. Ni(II) ions are incorporated into the electrode by immersion of this electrode in 1.0?M nickel sulfate solution. Cyclic voltammetry and chronoamperometry techniques are used for the electrochemical study of this modified electrode in the absence and the presence of methanol. The effect of methanol concentration on the anodic peak current shows an increase in the anodic peak current up to 1.25?M. Current density of Ni/IL/CPE for methanol oxidation in alkaline media is investigated by comparison with some of the previously reported electrodes. Results show that this electrode exhibits a high efficient electrocatalytic activity toward the oxidation of methanol with the current density of 17.6?mA?cm^?2. The rate constant for chemical reaction between methanol and redox sites of electrode is calculated. This new proposed electrode is simple and efficient enough, and it can be widely used as anode in direct methanol fuel cell.