静电纺丝制备Tb-PEG+Eu-PEG/PANI/PAN荧光导电相变三功能复合纤维

以聚丙烯腈(PAN)为载体基质、 以铕-聚乙二醇(Eu-PEG)和铽-聚乙二醇(Tb-PEG)为相变荧光材料, 加入掺杂的导电聚苯胺(PANI), 采用静电纺丝技术制得Tb-PEG+Eu-PEG/PANI/PAN复合纤维. 采用扫描电子显微镜(SEM)、 荧光光谱(FL) 仪、 差示扫描量热(DSC)仪及宽频介电松驰谱(BDS)仪等方法对相变荧光导电复合纤维的性能进行分析. 研究结果表明, 复合纤维具备良好的荧光、 相变及导电性能. 在294 nm紫外光激发下, 通过调节Tb-PEG和Eu-PEG的质量比可调节复合纤维的发光强度和颜色, 同时复合纤维的相变温度在5467 ℃之间. 复合纤维的电导率达到10^-6 S/cm, 随着PANI含量的增加, 电导率和介电常数增加. 通过调节Tb-PEG, Eu-PEG和PANI的比例及PEG的分子量, 可以实现复合纤维荧光、 导电及相变性能的可控调整.     

静电纺丝技术制备聚丙烯腈/铕-脂肪酸相变和发光双功能复合纳米纤维

以不同链长的脂肪酸为配体,1,10-邻菲啰啉为第二配体,通过与发光稀土铕离子进行配位,合成了铕-脂肪酸相变和发光配合物;再采用静电纺丝技术以聚丙烯腈(PAN)为载体基质,铕-脂肪酸为相变和发光材料制备了一种新型的相变和发光纳米纤维.用扫描电镜(SEM)、X射线能量色散谱仪(EDS)、荧光光谱仪(FL)和差示扫描量热仪(DSC)对相变和发光纳米纤维的性能进行分析.研究结果显示,复合纳米纤维的直径在285~600 nm,在280 nm紫外光激发下,复合纳米纤维发射出主峰位于580,593和614 nm的红光,对应Eu3+的5D0-7F0,5D0-7F1及5D0-7F2跃迁.相变和发光纳米纤维具有优异的荧光性能及相变功能,纳米纤维的直径随着铕含量和脂肪酸碳链的增加呈现增大的趋势.     

静电纺丝制备聚苯胺及其复合导电纳米纤维的研究进展

聚苯胺(PANi)主链上电子高度离域,掺杂后导电性能好,是优良的结构型导电聚合物。PANi纳米纤维比表面积大,容易获得更高的导电性。本文综合论述了近年来国内外采用静电纺丝方法制备PANi及其复合纳米纤维的研究进展,重点介绍了纯PANi纳米纤维以及PANi/聚环氧乙烷(PEO)、PANi/聚丙烯腈(PAN)、PANi/聚甲基丙烯酸甲酯(PMMA)和PANi/聚乳酸(PLA)等复合纳米纤维的制备工艺及纤维特性,简单概述了PANi及其复合纳米纤维在电池隔膜、过滤、传感器、电磁屏蔽材料及吸波材料等方面的应用,并对其发展趋势进行展望。     

静电纺丝法制备聚丙烯腈/聚苯胺复合纳米纤维及其表征

利用静电纺丝技术,以聚丙烯腈(PAN)和苯胺(ANI)为前驱物,用过硫酸胺(APS)溶液在低温下缓慢氧化聚合,制备了PAN/PANI复合纳米纤维,直径约500 nm.通过扫描电子显微镜(SEM)、红外光谱(FTIR)、X射线衍射(XRD)和激光拉曼(RAMAN)光谱仪等测试手段对材料的形貌和结构进行了表征.探讨了材料制备过程中影响纤维形貌、尺寸、均匀度的因素和PANI含量对复合纤维导电性能的影响,结果表明,PAN浓度、ANI的加入量和电压是影响纤维特性的主要因素;PANI在PAN基体中呈纳米尺寸分布,复合纳米纤维具有良好的导电性能,导电率可达10-2S/cm.     

稀土(铕、铽)配合物中荧光性能相互影响

以5-磺基水杨酸、α-噻吩甲酰三氟丙酮为小分子配体,以溶液聚合制备的甲基丙烯酸甲酯和丙烯酸共聚物(PMMA-AA)为高分子配体,合成了一系列铕、铽的高分子配合物,并通过UV、IR和元素分析对其结构进行了表征。用荧光分光光度计研究了它们的荧光性能及铕、铽之间的荧光性能的互相影响规律,讨论了它们的荧光发射峰位、荧光发射强度与组成的关系。实验结果表明,在稀土(铕、铽)多核高分子荧光配合物中,Eu3 与Tb3 之间的荧光光谱有相互敏化或猝灭的作用。其中Eu3 对Tb3 的荧光有很强的荧光猝灭作用,且在n(Eu3 )∶n(Tb3 )=1∶1时,Eu3 对Tb3 的荧光猝灭作用最大;Tb3 在低浓度n(Eu3 )∶n(Tb3 )大于1∶1时,Tb3 对Eu3 的荧光有猝灭作用,Tb3 在高浓度n(Eu3 )∶n(Tb3 )小于1∶1时,Tb3 对Eu3 的荧光有很强的敏化作用。     

双核双配体稀土配合物Tb1-xEux(TTA)3Phen的合成及光学性能研究

合成了系列铕铽双核稀土有机稀土配合物Tb1-xEux（TTA）3Phen，通过差热．热重分析、XRD、红外光谱、紫外光谱和荧光光谱等测试手段研究了配合物的组成、结构和发光性质。由紫外可见光谱可以看出，稀土有机配合物的吸收峰主要来自有机配体HTrA和1，10-Phen；差热-热重分析证明，稀土有机配合物热稳定性较好。荧光光谱和电致发光表明，铽对铕配合物的发光有协同作用。在该系列配合物中，不仅有机配体可以将吸收的能量传递给发光的铕离子使其发光，而且铽离子也可将其吸收的能量通过分子内能量传递给铕离子，增强铕的发光强度。同时就双核稀土有机配合物光致发光和电致发光的特性及掺杂体系的能量传递过程进行了讨论。     

铕(Ⅲ)、铽(Ⅲ) β-二酮配合物的制备及表征

醋酸铕、醋酸铽分别与乙酰丙酮在60°C水浴下加热回流,生成两种稀土β-二酮配合物,即乙酰丙酮铕(Eu(acac)3?3H2O)和乙酰丙酮铽(Tb(acac)3?3H2O),在紫外灯下观察配合物发光现象,乙酰丙酮铕在紫外灯下显暗红色,乙酰丙酮铽在紫外灯下显亮绿色。红外分析结果与理论相吻合,荧光分析表明它们是较好的荧光材料,热分析结果说明它们的热稳定性相对较高。     

MWCNTs/PVA-co-PE纳米纤维膜导电性能的研究

通过原位自组装法制备MWCNTs/PVA-co-PE复合材料,将此复合材料与纤维素酯共混后,利用热塑性聚合物熔融共混相分离法制备了MWCNTs/PVA-co-PE复合纳米纤维。通过SEM和TEM分析表征了MWCNTs/PVA-co-PE复合纳米纤维的形态、结构以及多壁碳纳米管在纳米纤维中的分布状态;研究了多壁碳纳米管添加量对MWCNTs/PVA-co-PE复合纳米纤维导电性能的影响。结果表明,当多壁碳纳米管的添加量大于6%时,MWCNTs/PVA-co-PE复合材料的表面电阻会显著下降;提高MWCNTs的添加量会使MWCNTs/PVA-co-PE复合纳米纤维的表面电阻稍微下降,但是效果不大,这可能是由于MWCNTs在纳米纤维内部不能形成良好的导电通道。     

静电纺丝制备碳纳米管基复合纳米纤维的研究进展

碳纳米管(CNTs)作为增强材料与聚合物复合制成纳米纤维,有助于提高纳米纤维性能,扩展其应用领域。本文综述了近年来国内外静电纺丝制备CNTs基复合纳米纤维的研究现状,重点介绍了CNTs/PAN复合纳米纤维、CNTs/PANI/PEO复合纳米纤维、CNTs/PVA复合纳米纤维、CNTs/PA复合纳米纤维、CNTs/TiO2复合纳米纤维的研究进展及其在纳米传感器、电磁干扰、超级电容器、染料敏化太阳能电池(DSSCs)、组织工程支架、药物控制释放等方面的应用潜力,展望了CNTs基复合纳米纤维的发展前景。     

稀土超分子纳米功能材料的组装及其荧光性质比较

本文在无水乙醇中制备了铕的四元、三元和二元系列配合物,当配体Phen和TTA共存时,协同发光效应使得Eu(Phen)2(TTA)2的荧光最强,在铕配合物和纳米级介孔分子筛MCM－41或（CH3）3Si-MCM-41组成的超分子发光体系中,主体分子筛的疏水孔道环境有利于客体铕配合物的发展,说明主客体之间的相互作用会对复合的超分子发光材料的荧光性质产生影响。     

静电纺丝技术制备Tb（BA）3phen/PANI/PVP光电双功能复合纳米纤维

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物[Tb(BA)3phen]掺杂到高分子材料(PVP)中,制备出一类新型的具有光电双功能的Tb(BA)3phen/PANI/PVP复合纳米纤维.用扫描电子显微镜(SEM)、X射线能量色散谱仪(EDS)、荧光光谱仪及宽频介电松弛谱仪对样品进行了表征.结果表明,复合纳米纤维直径为(331±43)nm.在276 nm紫外光激发下,Tb(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于491,547和585 nm的绿光,对应Tb3+的5D4→7F6,5D4→7F5和5D4→7F4跃迁.当Tb(BA)3phen∶PANI∶PVP的质量比为15∶10∶100时,复合纳米纤维的荧光发射最强,其电导率随PANI含量的增大而升高,在PANI∶PVP为50%(wt%)时,其电导率在高频(106Hz)下达1.531×10-6S/cm.     

静电纺丝制备Eu(BA)3phen/PANI/PVP光电双功能复合纳米纤维及其性能

采用静电纺丝技术将聚苯胺(PANI)和稀土配合物Eu(BA)3phen掺杂到高分子材料聚乙烯吡咯烷酮(PVP)中, 制备出新型的具有光电双功能的Eu(BA)3phen/PANI/PVP复合纳米纤维. 采用扫描电子显微镜、 X射线能量色散谱仪、 荧光光谱仪及宽频介电松弛谱仪对样品进行了表征. 实验结果表明, 复合纳米纤维直径为(270±31) nm. 在275 nm紫外光激发下, Eu(BA)3phen/PANI/PVP复合纳米纤维发射出主峰位于580, 594和617 nm的红光, 对应于Eu3+的 5D0→7F0, 5D0→7F1和5D0→7F2跃迁. 当m[Eu(BA)3phen]:m(PANI):m(PVP)=15:10:100 时, 复合纳米纤维的荧光发射最强. 复合纤维的电导率随PANI含量的增大而升高. 在m(PANI):m(PVP)=50:100时, 其电导率在高频(106 Hz)下达到1.5×10-6 S/cm.     

YF3:Eu3+纳米纤维/高分子复合纳米纤维的制备与表征

采用静电纺丝技术制备了Y2O3:Eu3+纳米纤维,使用NH4HF2为氟化剂,经双坩埚法氟化和脱氨后得到YF3:Eu3+纳米纤维,再采用静电纺丝技术制备了YF3:Eu3+纳米纤维/PVP复合纳米纤维. XRD分析表明,立方相的Y2O3:Eu3+氟化后,得到了正交相的YF3:Eu3+纳米纤维,空间群为Pnma;YF3:Eu3+纳米纤维/PVP复合纳米纤维具有明显的YF3:Eu3+的衍射峰. SEM分析表明,YF3:Eu3+纳米纤维与YF3:Eu3+纳米纤维/PVP复合纳米纤维的直径分别为91±11 nm、319±43 nm,表面光滑. 用Shapiro-Wilk方法检验,纤维直径属于正态分布. 荧光光谱分析表明,YF3:Eu3+纳米纤维和YF3:Eu3+纳米纤维/PVP复合纳米纤维的最强发射峰均位于588 nm和595 nm,属于Eu3+的5D0→7F1跃迁,表明Eu3+占据YF3基质中Y3+晶格点的C2对称格位. PVP对YF3:Eu3+发光峰位没有影响,但发光强度降低;YF3:Eu3+的含量与YF3:Eu3+纳米纤维/PVP复合纳米纤维的发光强度成线性关系.     

Thermally stable luminescent composites fabricated by confining rare earth complexes in the two-dimensional gallery of titania nanosheets and their photophysical properties

Fluorescent composite materials of exfoliated titania nanosheets, Ti(0.91)O(2), and rare earth (RE) complexes, Eu(phen)(2)Cl(3).2H(2)O and Tb(phen)(2)Cl(3).2H(2)O (phen = 1,10-phenanthroline), were synthesized via flocculation between them. X-ray diffraction measurements and transmission electron microscopy observations confirmed a restacked lamellar structure for the composites, and elemental analysis revealed a high RE complex content of 15 wt %. The decomposition temperature of the complexes trapped in the composites was improved to 420 degrees C from 250 degrees C for the free form. The restacked composite composed of Ti(0.91)O(2) nanosheets and Eu(phen)(2) exhibited characteristic red emission from the complex, while the composite with Tb(phen)(2) gave featureless emission originated from the ligand. This phenomenon can be explained by a shift of triplet state level of the ligand after encapsulation in the host titania nanosheets. The quantum yield of europium complex in the composite was enhanced 1.6 times more than that of the pure complex.     

浸润性可调的导电聚苯胺/聚丙烯腈同轴纳米纤维

聚苯胺(PANI)因其具有可调的导电性、优异的化学稳定性、简单的制备方法等特点, 在化学电源、抗静电涂层、电磁屏蔽材料、抗腐蚀、传感器等领域具有广泛的应用前景[^1~4]. 由于聚苯胺的刚性分子链使得聚苯胺几乎不溶不熔, 难以加工应用, 因此, 将导电聚合物直接制成纳米纤维一直是合成纤维界所希望的目标之一. 此外, 由于材料尺度的减小, 使纳米材料的表面与界面性质,尤其是表面浸润性变得更为突出.浸润性是固体表面的重要特征之一, 它主要由表面的化学组成和微观结构共同决定^[5,6]. 可调的浸润性在超疏水材料、药物传输、仿生材料和微流体等领域具有重要的应用价值^[7~10] , 引起人们广泛关注.     

A composite polyaniline/graphene–coated polyamide6 nanofiber mat for electrochemical applications

In this study, polyamide6 (PA6) nanofiber mats were fabricated through the electrospinning process. The nanofibers were coated by polyaniline (PANI) using the in situ polymerization of aniline in the presence of graphene oxide. The composite of the PANI/graphene oxide–coated nanofiber mat was treated with hydrazine monohydrate to reduce graphene oxide to graphene, and this was followed by the reoxidation of PANI. Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), thermal gravimetric analysis (TGA), tensile strength tests, electrical conductivity measurements, cyclic voltammetry (CV), and charge/discharge measurements were conducted on the composite PA6/graphene nanofiber mats. It was found that the surface of the PA6 nanofibers was coated uniformly with the granular PANI and graphene oxide. Besides, the composite nanofibers showed good tensile and thermal properties. Their electrical conductivity and specific capacitance, when used as a separator in the cell, were 1.02 × 10^?4 S/cm and 423.28 F/g, respectively. Therefore, the composite PANI/reduced graphene oxide–coated PA6 nanofiber mats could be regarded as suitable candidates for application in energy storage devices.     

Novel red-emitting Ba2Tb(BO3)2Cl:Eu phosphor with efficient energy transfer for potential application in white light-emitting diodes

A novel red-emitting Ba(2)Tb(BO(3))(2)Cl:Eu phosphor possessing a broad excitation band in the near-ultraviolet (n-UV) region was synthesized by the solid-state reaction. Versatile Ba(2)Tb(BO(3))(2)Cl compound has a rigid open framework, which can offer two types of sites for various valence's cations to occupy, and the coexistence of Eu(2+)/Eu(3+) and the red-emitting luminescence from Eu(3+) with the aid of efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) have been investigated. Ba(2)Tb(BO(3))(2)Cl emits green emission with the main peak around 543 nm, which originates from (5)D(4) → (7)F(5) transition of Tb(3+). Ba(2)Tb(BO(3))(2)Cl:Eu shows bright red emission from Eu(3+) with peaks around 594, 612, and 624 nm under n-UV excitation (350-420 nm). The existence of Eu(2+) can be testified by the broad-band excitation spectrum, UV-vis reflectance spectrum, X-ray photoelectron spectrum, and Eu L(3)-edge X-ray absorption spectrum. Decay time and time-resolved luminescence measurements indicated that the interesting luminescence behavior should be ascribed to efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) in Ba(2)Tb(BO(3))(2)Cl:Eu phosphors.     

基于对羟基苯乙酸及邻菲咯啉的稀土配合物的合成、晶体结构和荧光光谱

在乙醇-水体系中合成了5个对羟基苯乙酸及邻菲咯啉稀土配合物:其中4个配合物[RE(HPAA)3(phen)2].2H2O(RE=Eu(1),Tb(2),Dy(3),Yb(4))具有相同的结构和类似的化学组成;第5个配合物是[Yb(HPAA)2(H2O)2(phen)2](HPAA).(HHPAA).2H2O(5),HHPAA=对羟基苯乙酸,C8H8O3;phen=1,10-邻菲咯啉),其结构和化学组成与前4个配合物不同。并通过元素分析、红外光谱、热重分析和粉末X-射线衍射对产物进行表征,用单晶X-射线衍射方法测定了配合物5的晶体结构。配合物5(C56H53N4O16Yb)属于三斜晶系,空间群P21/c,晶胞参数:a=2.206 52(3)nm,b=1.368 76(2)nm,c=1.754 14(2)nm,β=101.167(1)°,晶胞体积:V=5.19754(12)nm3,晶胞内结构基元数Z=4,分子量Mr=1211.06。测定了铕、铽和镝配合物的荧光光谱,结果表明,在形成配合物后,依然显示铕髥离子、铽髥离子和镝髥离子的特征发射,这表明配体将吸收的能量有效地转移给了中心离子,配体起到了很好的敏化作用。     

Electrospinning Synthesis and Photoluminescence Properties of SnO2：xEu3＋ Nanofibers

NnO2：xEu3＋（x=O, 1%, 3%, 5%, molar fraction） fibers were synthesized by electrospinning technology. The size of the as-prepared fibers is relatively uniform and the average diameter is about 200 nm with a large draw ratio. The as-prepared Eu3＋ doped SnO2 nanofibers have a rutile structure and consist of crystallitc grains with an average size of about 10 nm. A slight red shift of the A1gand Bag vibration modes and an additional peak at 288 nm were observed in the Raman spectra of the nanofibers. The energies of bandgaps of the SnO2 nanofiber with Eu doping of 1% and 3% are 2.64 eV, and the energy of bandgap is 2.94 eV with Eu doping of 5%（molar fraction）. There is only orange emission（5D0→7F1 magnetic dipole transition） for Eu doped SnO2 nanofibers, and no red emission could be observed. The orange emission upon indirect excitation splits into three peaks and the peak intensity at the excitation wavelength of 275 nm is higher than that at the excitation wavelength of 488 nm.     

Bismuth 2,6-pyridinedicarboxylates: assembly of molecular units into coordination polymers, CO2 sorption and photoluminescence

Six inorganic-organic bismuth 2,6-pyridinedicarboxylate (pdc) compounds, [Bi(2,6-pdc)(3)]·3(dma), 1, [Bi(2,6-pdc)(3)]·3(dma)·2(H(2)O), 2, [Bi(2,6-pdc)(2)(dmf)]·(dma), 3, Bi(2,6-pdc)(2,6-pdcme)(MeOH), 4, [LiBi(2,6-pdc)(3)(H(2)O)]·2(dma), 5, and Li(5)Bi(2,6-pdc)(4)(H(2)O)(2), 6 (where dma = dimethyl ammonium cation, dmf = dimethylformamide and 2,6-pdcme = 6-methyl-oxycarbonyl pyridine 2-carboxylate) have been synthesized under solvothermal conditions and their structures determined by single crystal X-ray diffraction. Compounds 1-4 have molecular structures whereas compounds 5 and 6 form one- and three-dimensional frameworks, respectively. Compounds 1 and 2, both having similar monomeric bismuth coordination units, which are connected non-covalently into a (4,4)-connected square lattice by H-bonding interactions through dma cations. Compounds 3 and 4, both have a similar dimeric bismuth coordination unit. In 3, the dimers are connected into a one-dimensional chain by H-bonding interactions through dma cations. In the partially esterified and neutral 4, there was no such H-bonding interactions due to the absence of any dma cations. Compounds 5 and 6 have a similar monomeric bismuth coordination unit to that seen in 1 and 2. In 5, the monomers are connected through lithium cations into one-dimensional chains, which further interact non-covalently by H-bonding interactions through dma cations. In the lithium-rich 6, the monomers are connected by the lithium cations and 2,6-pdc anions into a three dimensional structure with intramolecular H-bonding interactions involving the water molecules. The non-porous 5 and 6 exhibit a reasonable amount of H(2) and CO(2) sorptions, respectively. Tb(3+)- and Eu(3+)-doped and co-doped 4 and 5 emit characteristic sensitized green/red/yellow-orange luminescence.