Enantioseparation of hydroxyeicosatetraenoic acids by hydroxypropyl‐γ‐cyclodextrin‐modified micellar electrokinetic chromatography

Complete resolution of hydroxyeicosatetraenoic acid (HETE) enantiomers was achieved using hydroxypropyl‐γ‐cyclodextrin (HP‐γ‐CD)‐modified MEKC. The optimum running conditions were determined to be utilizing a 30 mM phosphate–15 mM borate buffer (pH 9.0) containing 30 mM HP‐γ‐CD and 75 mM SDS as the BGE, application of +30 kV as the effective voltage, and carrying out the experiment at 15°C. The eluents were detected at 235 nm. The method was used successfully for the simultaneous separations of (S)‐ and (R)‐enantiomers of regioisomeric 8‐, 11‐, 12‐, and 15‐HETEs. Subsequently, the optimized method was applied to evaluate the stereochemistry of 8‐ and 12‐HETEs from the marine red algae, Gracilaria vermiculophylla and Gracilaria arcuata, respectively. The 8‐HETE was found to be a mixture of 98% (R)‐enantiomer and 2% (S)‐enantiomer, while the 12‐HETE was a mixture of 98% (S)‐enantiomer and 2% (R)‐enantiomer. The present study demonstrates that the HP‐γ‐CD‐modified MEKC method is simple and sensitive and provides unambiguous information on the configuration of natural and synthetic HETEs.     

Determination of the binding constants of modafinil enantiomers with sulfated β‐cyclodextrin chiral selector by capillary electrophoresis using three different linear plotting methods

Binding constants for the enantiomers of modafinil with the negatively charged chiral selector sulfated‐β‐CD (S‐β‐CD) using CE technique is presented. The calculations of the binding constants employing three different linearization plots (double reciprocal, X‐reciprocal and Y‐reciprocal) were performed from the electrophoretic mobility values of modafinil enantiomers at different concentrations of S‐β‐CD in the BGE. The highest inclusion affinity of the modafinil enantiomers were observed for the S‐enantiomer–S‐β‐CD complex, in agreement with the computational calculations performed previously. Binding constants for each enantiomer–S‐β‐CD complex at different temperatures, as well as thermodynamic parameters for binding, were calculated. Host–guest binding constants using the double reciprocal fit showed better linearity (r²>0.99) at all temperatures studied (15–30°C) and compared with the other two fit methods. The linear van't Hoff (15–30°C) plot obtained indicated that the thermodynamic parameters of complexation were temperature dependent for the enantiomers.     

Estimation of apparent binding constant of complexes of selected acyclic nucleoside phosphonates with β‐cyclodextrin by affinity capillary electrophoresis

Affinity capillary electrophoresis (ACE) has been applied to estimation of apparent binding constant of complexes of (R,S)‐enantiomers of selected acyclic nucleoside phosphonates (ANPs) with chiral selector β‐cyclodextrin (βCD) in aqueous alkaline medium. The noncovalent interactions of five pairs of (R,S)‐enantiomers of ANPs‐based antiviral drugs and their derivatives with βCD were investigated in the background electrolyte (BGE) composed of 35 or 50 mM sodium tetraborate, pH 10.0, and containing variable concentration (0–25 mM) of βCD. The apparent binding constants of the complexes of (R,S)‐enantiomers of ANPs with βCD were estimated from the dependence of effective electrophoretic mobilities of (R,S)‐enantiomers of ANPs (measured simultaneously by ACE at constant reference temperature 25°C inside the capillary) on the concentration of βCD in the BGE using different nonlinear and linear calculation methodologies. Nonlinear regression analysis provided more precise and accurate values of the binding constants and a higher correlation coefficient as compared to the regression analysis of the three linearized plots of the effective mobility dependence on βCD concentration in the BGE. The complexes of (R,S)‐enantiomers of ANPs with βCD have been found to be relatively weak – their apparent binding constants determined by the nonlinear regression analysis were in the range 13.3–46.4 L/mol whereas the values from the linearized plots spanned the interval 12.3–55.2 L/mol.     

Simultaneous enantioseparation of cyproconazole,bromuconazole, and diniconazole enantiomers by CD‐modified MEKC

An efficient method for the simultaneous enantioseparation of cyproconazole, bromuconazole, and diniconazole enantiomers was developed by CD‐modified MEKC using a dual mixture of neutral CDs as chiral selector. Three neutral CDs namely hydroxypropyl‐β‐CD, hydroxypropyl‐γ‐CD, and γ‐CD were tested as chiral selectors at different concentrations ranging from 10, 20, 30 and 40 mM, but enantiomers of the studied fungicides were not completely separated. The best dual chiral recognition mode for the simultaneous separation of cyproconazole, bromuconazole, and diniconazole enantiomers was achieved with a mixture of 27 mM hydroxypropyl‐β‐CD and 3 mM hydroxypropyl‐γ‐CD in 25 mM phosphate buffer (pH 3.0) containing 40 mM SDS to which methanol‐acetonitrile (10%:5% v/v) was added as organic modifiers. The best separation was based on the appearance of 10 peaks simultaneously, with good resolution (R_s 1.1–15.9), and peak efficiency (N>200 000). Good repeatabilities in the migration time, peak area, and peak height were obtained in terms of RSD ranging from (0.72 to 1.06)%, (0.39 to 3.49)%, and (1.90 to 4.84)%, respectively.     

The study of enantioselectivity of all regioisomers of mono‐carboxymethyl‐β‐cyclodextrin used as chiral selectors in CE

This work documents the influence of the position of single carboxymethyl group on the β‐cyclodextrin skeleton on the enantioselectivity. These synthesized monosubstituted carboxymethyl cyclodextrin (CD) derivatives, native β‐cyclodextrin, and commercially available carboxymethyl‐β‐cyclodextrin with degree of substitution approximately 3 were used as additives into the BGE consisting of phosphate buffer at 20 mmol/L concentration, pH 2.5, and several biologically significant low‐molecular‐mass chiral compounds were enantioseparated by CE. The results indicate that different substituent location on β‐cyclodextrin skeleton has a significant influence on the enantioseparation of the investigated enantiomers. The enantioselectivity of 2^I‐O‐regioisomer was better than with native β‐cyclodextrin. Comparable results to native β‐cyclodextrin were obtained for 6^I‐O‐ regioisomer and the enantioselectivity of 3^I‐O‐regioisomer was even worse than with native β‐cyclodextrin. Commercially available derivative of CD provides better resolutions than the monosubstituted carboxymethyl CD derivatives for most of the investigated analytes.     

Computer simulation of the enantioselective separation of weak bases in an online capillary electrophoresis based microanalysis configuration comprising sulfated cyclodextrin as selector

Computer simulation was utilized to characterize the electrophoretic processes occurring after reactant mixing in an online assay format used for monitoring the enantioselective N‐demethylation of ketamine to norketamine in the presence of highly sulfated γ‐cyclodextrin (HS‐γ‐CD). The incubated reaction mixture (at pH 7.4 and without chiral selector) is bracketed by a low pH BGE containing 2% HS‐γ‐CD as chiral selector, thereby forming a discontinuous buffer system. Upon power application, simulation provides insight into the formation of moving boundaries and new zones together with the prediction of the behavior of ketamine and norketamine enantiomers. The analytes first migrate cationically in a zone electrophoretic manner until they come in contact with HS‐γ‐CD upon which enantioseparation is initiated. Complexation has a focusing effect and the electrophoretic transport becomes reversed, that is, toward the anode. Simulation revealed that the initial conditions for the chiral separation, including buffer components concentrations, pH, and ionic strength, are different than those in the BGE. As a consequence thereof, the experimentally determined complexation parameters for the BGE were unable to correctly describe the migration behavior of the analytes in this column section. An increase in the input binding constants by a factor of two to four, as a result of the decreased ionic strength, resulted in simulation data that agreed with experimental findings.     

One‐step strategy for the synthesis of a derivatized cyclodextrin‐based monolithic column

Derivatized β‐cyclodextrin (β‐CD) functionalized monolithic columns were prepared by a “one‐step” strategy using click chemistry. First, the intended derivatized β‐CD monomers were synthesized by a click reaction between propargyl methacrylate and mono‐6‐azido‐β‐CD and then sulfonation or methylation was carried out. Finally, monolithic columns were prepared through a one‐step in situ copolymerization of the derivatized β‐CD monomer and ethylene glycol dimethacrylate. The sulfated β‐CD‐based monolith was successfully applied to the hydrophilic interaction liquid chromatography separation of nucleosides and small peptides, while the methylated β‐CD‐functionalized monolith was useful for the separation of nonpolar compounds and drug enantiomers in capillary reversed‐phase liquid chromatography. The structures of the monomers were characterized by Fourier transform infrared spectroscopy and mass spectrometry. The physicochemical properties and column performance of monoliths were evaluated by scanning electron microscopy and micro high performance liquid chromatography. This strategy has considerable prospects for the preparation of other derivatized CD‐functionalized methacrylate monoliths.     

Enantioseparation of nicotine alkaloids in cigarettes by CE using sulfated β‐CD as a chiral selector and a capillary coated with amino groups

Nicotine (NC) and its related compounds (cotinine (CN), nornicotine (NN), anatabine (AT) and anabasine (AB)) were simultaneously enantioseparated by CE using a capillary with amino groups and sulfated β‐CD as a chiral selector. The optimum running conditions were found to be 30 mM acetate buffer (pH 5.0) containing 8% sulfated β‐CD with an applied voltage of +15 kV at 30°C using direct detection at 260 nm. Using a capillary coated with amino groups, the EOF migrates toward the positive pole. However, when sulfated β‐CD was added to the BGE, it was found that the EOF migrated toward the negative pole due to ionic adsorption of sulfated β‐CD to amino groups on the capillary inner wall. All the cationic analytes migrated as anions, suggesting that they formed stable anionic complexes with sulfated β‐CD. With this system and a simple pretreatment with mini‐cartridges, NC alkaloids in five cigarette samples were enantioseparated. As a result, each of the compounds except for CN was detected. In the case of NC, only (S)‐NC was detected (more than 99.9%), but in the case of NN, AT and AB, the ratios of (S)‐isomer to total isomers were in the ranges 58–70, 81–85 and 59–65%, respectively. On the other hand, only NC was detected in cigarette smoke and the ratio of (S)‐ and (R)‐NCs was 96:4. The amounts of NC alkaloids in cigarettes suggest that the production of (R)‐NC resulted from racemization due to the high temperature/burning of the cigarette.     

Enantioselective determination of cathinones in urine by high pressure in‐line SPE–CE

This work presents a strategy based on the in‐line coupling of SPE and CE for the chiral determination of cathinones (R,S‐mephedrone, R,S‐4‐methylephedrine, and R,S‐ methylenedioxypyrovalerone) in urine samples, using a sample pretreatment based on liquid‐liquid extraction. The chiral separation of the compounds is achieved by adding a mixture of 8 mM 2‐hydroxypropil β‐CD and 5 mM β‐CD to the BGE, which consists of 70 mM of monosodium phosphate aqueous solution at pH 2.5. Oasis HLB was the selected sorbent for the in‐line SPE device, and to reduce analysis time and LODs, several parameters affecting the in‐line SPE system were evaluated, such as pressure and time of sample injection and dimensions of the SPE device. The highest preconcentration factors were achieved by using 3 bar of injection pressure for 20 min with an in‐line SPE device of 2 mm length and 150 µm of i.d. The developed method was applied to determine the presence of the compounds in spiked urine samples. The LODs obtained were between 3 and 8 ng/mL, and these levels were below the usual concentrations at which these drugs are present in urine from cathinone abusers. Thus, the optimized method has the potential to be applied for toxicological and forensic purposes.     

Enantiomeric Separation and Determination of R,S-Salsolinol by Capillary Electrophoresis

A new method for the quantitative determination of the enantiomers of salsolinol, an endogenous neurotoxin, was reported. Enantiomeric separation of salsolinol was obtained by capillary zone electrophoresis using hydroxypropyl-β-cyclodextrin （HP-β-CD） as chiral selector. Coupled with UV detection, this separation was applied to the determination of R,S-salsolinol in dried banana chips, and both R- and S-salsolinol were found at 40 ktg/g level.     

Use of cyclodextrin‐modified gold nanoparticles for enantioseparations of drugs and amino acids based on pseudostationary phase‐capillary electrochromatography

The application of chemical‐modified gold nanoparticles (GNPs) as chiral selector for the enantioseparation based on pseudostationary phase‐CEC (PSP‐CEC) is presented. GNPs modified by thiolated β‐CD were characterized by NMR and FT‐IR. The nanoparticle size was determined to be of 9.5 nm (+2.5 nm) by Transmission Electron Microscopy (TEM) and UV spectra. Four pairs of dinitrophenyl‐labeled amino acid enantiomers (DL‐Val, Leu, Glu and Asp) and three pairs of drug enantiomers (RS‐chlorpheniramine, zopiclone and carvedilol) were analyzed by using modified GNPs as the chiral selector in PSP‐CEC. Good theoretical plate number (up to 2.4×10⁵ per meter) and separation resolution (up to 4.7) were obtained even with low concentration of modified GNPs (0.8–1.4 mg/mL). The corresponding concentration of β‐CD in the buffer was only 0.30?0.53 mM, which was much lower than the optimum concentration of 15 mM if pure β‐CD was used as chiral selector. Our results showed that thiolated β‐CD modified GNPs have more sufficient interaction with the analytes, resulting in significant enhancement of enantioseparation. The study shed light on potential usage of chemical modified GNPs as chiral selector for enantioseparation based on PSP‐CEC.     

Enantiopurity analysis of new types of acyclic nucleoside phosphonates by capillary electrophoresis with cyclodextrins as chiral selectors

CE methods have been developed for the chiral analysis of new types of six acyclic nucleoside phosphonates, nucleotide analogs bearing [(3‐hydroxypropan‐2‐yl)‐1H‐1,2,3‐triazol‐4‐yl]phosphonic acid, 2‐[(diisopropoxyphosphonyl)methoxy]propanoic acid, or 2?(phosphonomethoxy)propanoic acid moieties attached to adenine, guanine, 2,6‐diaminopurine, uracil, and 5‐bromouracil nucleobases, using neutral and cationic cyclodextrins as chiral selectors. With the exception of the 5‐bromouracil‐derived acyclic nucleoside phosphonate with a 2‐(phosphonomethoxy)propanoic acid side chain, the R and S enantiomers of the other five acyclic nucleoside phosphonates were successfully separated with sufficient resolutions, 1.51–2.94, within a reasonable time, 13–28 min, by CE in alkaline BGEs (50 mM sodium tetraborate adjusted with NaOH to pH 9.60, 9.85, and 10.30, respectively) containing 20 mg/mL β‐cyclodextrin as the chiral selector. A baseline separation of the R and S enantiomers of the 5‐bromouracil‐derived acyclic nucleoside phosphonate with 2‐(phosphonomethoxy)propanoic acid side chain was achieved within a short time of 7 min by CE in an acidic BGE (20:40 mM Tris/phosphate, pH 2.20) using 60 mg/mL quaternary ammonium β‐cyclodextrin chiral selector. The developed methods were applied for the assessment of the enantiomeric purity of the above acyclic nucleoside phosphonates. The preparations of all these compounds were found to be synthesized in pure enantiomeric forms. Using UV absorption detection at 206 nm, their concentration detection limits were in the low micromolar range.     

Development of a novel dual CD‐MEKC system for the systematic flavonoid fingerprinting of Ligaria cuneifolia (R. et P.) Tiegh.—Loranthaceae—extracts

The present work deals with the development and validation of a novel dual CD‐MEKC system for the systematic flavonoid fingerprinting of Ligaria cuneifolia (R. et P.) Tiegh.—Loranthaceae—extracts. The BGE consisted of 20 mM pH 8.3 borate buffer, 50 mM SDS, a dual CD system based on the combination of 5 mM β‐CD and 2% w/v S‐β‐CD, and 10% v/v methanol. The proposed method has been successfully applied to the comparative analysis of extracts from aerial parts and different hosts, geographical areas, and extraction procedures in order to establish the flavonoid fingerprint of L. cuneifolia . The method was validated according to international guidelines. LOD and LOQ, intra and interday precision, and linearity were determined for catechin, epicatechin, procyanidin B2, rutin, quercetin‐3‐O‐glucoside, quercetin‐3‐O‐xyloside, quercetin‐3‐O‐rhamnoside, quercetin‐3‐O‐arabinofuranoside, quercetin‐3‐O‐arabinopyranoside, and quercetin. The CD‐MEKC methodology emerges as a suitable alternative to the traditional HPLC for quality control, fingerprinting, and standardization of L. cuneifolia extracts from different sources.     

Chiral Recognition of Tryptophan Enantiomers Based on β‐Cyclodextrin‐platinum Nanoparticles/Graphene Nanohybrids Modified Electrode

The nanohybrids which based on β‐cyclodextrin, platinum nanoparticles and graphene (β‐CD‐PtNPs/GNs) were successfully synthesized and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT‐IR) and electrochemical impedance spectroscopy (EIS). Then they were used to construct a simple and reliable chiral sensing platform to interact with tryptophan (Trp) enantiomers. Differential pulse voltammetry (DPV) was used to investigate the stereo selectivity of β‐CD‐PtNPs/GNs to Trp enantiomers. After interaction, the obvious difference of peak currents of L‐Trp and D‐Trp was obtained, indicating this strategy could be employed to chiral recognition of Trp enantiomers. Under the optimum conditions, the chiral sensor exhibited a good linear response to Trp enantiomers in a linear range of 5.0×10^?5 to 5.0×10^?3 M with a low limit of detection of 1.7×10^?5 M (S/N=3). This approach provided a new available platform to recognize and determine Trp enantiomers.     

Enantioseparation of chiral benzimidazole derivatives by electrokinetic chromatography using sulfated cyclodextrins

Baseline separation of 18 new substituted benzimidazole derivatives, potent AMP‐activated protein kinase (AMPK) activators, with one chiral center, was achieved by CD‐EKC using sulfated and highly sulfated CDs (SCDs and HS‐CDs) as chiral selectors. The influence of the type and concentration of the chiral selectors on the enantioseparations was investigated. The SCDs exhibit a very high enantioselectivity power since they allow excellent enantiomeric resolutions compared to those obtained with the neutral CDs. The enantiomers were resolved with analysis times around 6 min using 25 mM phosphate buffer at pH 2.5 containing either β‐S‐CD, HS‐β‐CD, HS‐γ‐CD (3 or 4% w/v) at 25°C, with a voltage of 20 kV. The apparent association constants of the inclusion complexes were calculated. The study of the solute structure‐enantioseparation relationships seems to show the high contribution of the interactions between the solutes phenyl ring and the CDs to the enantiorecognition process. The optimized method was briefly validated (LOD less than 1%) and the purity of enantiomers of compound 3 was determined. The enantiomer migration shows reversal order depending on the kind of CD.     

Enantioselective separation of chiral vicinal diols in capillary electrophoresis using a mono‐6A‐aminoethylamino‐β‐cyclodextrin as a chiral selector

This paper describes an improved access to mono‐6^A‐aminoethylamino‐β‐CD (β‐CDen), a very efficient cationic chiral selector for CZE in the separation of eight chiral aromatic vicinal diols. The β‐CDen concentration has a strong influence on the efficiency of enantioseparation. The effects of the pH and concentration of the BGE, the capillary temperature, and the applied voltage on the resolution and separation selectivity have been studied. Excellent chiral resolution was achieved under the optimal conditions of β‐CDen 10 mM, pH 10, 200 mM borate buffer at 15 kV and 20°C within 20 min. Moreover, the developed method was successfully applied to the determination of the enantiomeric purity of the catalytic asymmetric dihydroxylation (AD) reaction products.     

(1R,2R)‐2‐(4‐Methylenecyclohex‐2‐enyl)propyl (1R,4S)‐camphanate

Esterification of a single diastereomer of 2‐(4‐methylene­cyclohex‐2‐enyl)propanol, (II), with (1R,4S)‐(+)‐camphanic acid [(1R,4S)‐4,7,7‐trimethyl‐3‐oxo‐2‐oxabicyclo[2.2.1]heptane‐1‐carboxylic acid] leads to the crystalline title compound, C₂₀H₂₈O₄. The relative configuration of the camphanate was determined by X‐ray diffraction analysis. The outcome clarifies the relative and absolute stereochemistry of the naturally occurring bisabolane sesquiterpenes β‐turmerone and β‐sesquiphellandrene, since we have converted (II) into both natural products via a stereospecific route.     

Characterization of complexes between phenethylamine enantiomers and β‐cyclodextrin derivatives by capillary electrophoresis—Determination of binding constants and complex mobilities

To optimize chiral separation conditions and to improve the knowledge of enantioseparation, it is important to know the binding constants K between analytes and cyclodextrins and the electrophoretic mobilities of the temporarily formed analyte‐cyclodextrin‐complexes. K values for complexes between eight phenethylamine enantiomers, namely ephedrine, pseudoephedrine, methylephedrine and norephedrine, and four different β‐cyclodextrin derivatives were determined by affinity capillary electrophoresis. The binding constants were calculated from the electrophoretic mobility values of the phenethylamine enantiomers at increasing concentrations of cyclodextrins in running buffer. Three different linear plotting methods (x ‐reciprocal, y ‐reciprocal, double reciprocal) and nonlinear regression were used for the determination of binding constants with β‐cyclodextrin, (2‐hydroxypropyl)‐β‐cyclodextrin, methyl‐β‐cyclodextrin and 6‐O‐α‐maltosyl‐β‐cyclodextrin. The cyclodextrin concentration in a 50 mM phosphate buffer pH 3.0 was varied from 0 to 12 mM. To investigate the influence of the binding constant values on the enantioseparation the observed electrophoretic selectivities were compared with the obtained K values and the calculated enantiomer‐cyclodextrin‐complex mobilities. The different electrophoretic mobilities of the temporarily formed complexes were crucial factors for the migration order and enantioseparation of ephedrine derivatives. To verify the apparent binding constants determined by capillary electrophoresis, a titration process using ephedrine enantiomers and β‐cyclodextrin was carried out. Furthermore, the isothermal titration calorimetry measurements gave information about the thermal properties of the complexes.     

Gas‐phase fragmentation of γ‐lactone derivatives by electrospray ionization tandem mass spectrometry

Fragmentation reactions of β‐hydroxymethyl‐, β‐acetoxymethyl‐ and β‐benzyloxymethyl‐butenolides and the corresponding γ‐butyrolactones were investigated by electrospray ionization tandem mass spectrometry (ESI‐MS/MS) using collision‐induced dissociation (CID). This study revealed that loss of H₂O [M + H ?18]⁺ is the main fragmentation process for β‐hydroxymethylbutenolide (1) and β‐hydroxymethyl‐γ‐butyrolactone (2). Loss of ketene ([M + H ?42]⁺) is the major fragmentation process for protonated β‐acetoxymethyl‐γ‐butyrolactone (4), but not for β‐acetoxymethylbutenolide (3). The benzyl cation (m/z 91) is the major ion in the ESI‐MS/MS spectra of β‐benzyloxymethylbutenolide (5) and β‐benzyloxymethyl‐γ‐butyrolactone (6). The different side chain at the β‐position and the double bond presence afforded some product ions that can be important for the structural identification of each compound. The energetic aspects involved in the protonation and gas‐phase fragmentation processes were interpreted on the basis of thermochemical data obtained by computational quantum chemistry. Copyright © 2009 John Wiley & Sons, Ltd.     

Synergistic enantioseparation systems with either cyclodextrins or cyclofructans and L‐alanine Tert butyl ester lactate

The combined use of chiral ionic liquids (CILs) and conventional chiral selectors (CSs) in CE, to establish a synergistic system, has proven to be an effective approach for the separation of enantiomeric pairs. In this study, a new CE method was developed, employing a binary system of a CS, either a cyclodextrin (CD) or a cyclofructan (CF), and a chiral amino acid ester‐based ionic liquid (AAIL), for the chiral separation of four basic, acidic and zwitterionic drug compounds. In particular, the enantioseparation of two anticoagulants, warfarin (WAR) and coumachlor (COU), a non‐opioid analgesic, nefopam (NEF) and a third‐generation antihistamine, fexofenadine (FXD), was examined, by supporting the BGE with a CS and the chiral AAIL L‐alanine tert butyl ester lactate (L‐AlaC₄Lac). Parameters, such as the type of the CS, the concentration of both the CS and L‐AlaC₄Lac, and the BGE pH, were methodically examined in order to optimize the chiral separation of each analyte. It was observed that, in some cases, the addition of the AAIL into the BGE improved both resolution (R_s) and efficiency (N) significantly. In other cases, the synergistic effect enabled baseline separation of analyte enantiomers, at a much lower concentration of the CS. Finally, after optimization of separation conditions, baseline separations (R_s>1.5) of all four analytes were achieved in less than 5 min.