Pt‐catalyzed chemical modification of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) with vinylheptaphenylcyclotetrasiloxane

Pt‐catalyzed hydrosilylation between vinylheptaphenylcyclotetrasiloxane and a series of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) was used to prepare chemically modified materials. These modified polymers were characterized by IR, UV, and ¹H, ¹³C, and ²⁹Si NMR spectroscopy and gel permeation chromatography (GPC). The molecular weights, determined by GPC, UV, and NMR end‐group analysis, showed the anticipated increases. The thermal properties of the polymers were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The crystallinity, determined by DSC, was either reduced or completely eliminated for the modified polymers. The thermal stabilities, measured in both air and nitrogen by TGA, were slightly higher than the thermal stability of α,ω‐bis(trimethylsiloxy)polydimethylsiloxane. Significantly increased bulk viscosities were observed for all the modified polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3007‐3017, 2005     

Synthesis and properties of novel conjugated poly(silylacetylene silazane)s

A series of novel conjugated polymers, poly(silylacetylene silazane)s having different substituents, were prepared by ammonolysis of the corresponding α,ω‐dichlorosilyleneacetylene oligomers. The structures and properties of the poly(silylacetylene silazane)s were characterized by Fourier transform infrared, ¹H, ¹³C, ²⁹Si NMR, and elemental analyses, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and spectrofluorophotometry. The resulting polymers had good thermal properties and were moderately fluorescent. Their thermal stability was improved, and obvious red shift was observed when a phenyl substituent was attached on a silicon atom of polymers in the emission spectra. These polymers have the potential to be used as light‐emitting materials with good thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2897–2903, 2004     

Precision ADMET polyolefins containing dithiane: Synthesis,thermal properties,and macromolecular transformation

1,3‐Dithiane and its derivatives are widely used as powerful acyl anion equivalent to a range of useful transformations that are needed in the synthesis of natural products. In this work, a series of polyolefins containing pendant dithiane groups have been designed and synthesized via acyclic diene metathesis polymerization (ADMET) polymerization and subsequent hydrogenation. The structures of these polymers were characterized by ¹H NMR, ¹³C NMR, and FT‐IR, and successful incorporation of the dithiane groups was proved. With different contents of the dithiane moieties, these ADMET polymers exhibited distinct thermal properties different from each other as evidenced by differential scanning calorimetry and thermal gravimetric analysis. The dithiane units in the ADMET polymer with 20 methylene carbons between the adjacent dithiane groups were transformed into thiol groups via reaction with Bu₃SnH. This work provided a convenient route to synthesize polyethylene with pendant thiol groups that are evenly distributed in the chain. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2468–2475     

Synthesis and characterization of functional polyethylene with regularly distributed thioester pendants via ring‐opening metathesis polymerization

Four kinds of functional polyethylene carrying thioester pendants were synthesized via ring‐opening metathesis polymerization (ROMP) of alkyl cyclopent‐3‐enecarbothioate catalyzed by a ruthenium‐based commercial catalyst and subsequent hydrogenation of the ROMP products (alkyl = ethyl, n‐butyl, n‐octyl, or n‐dodecyl). In these polymers the pendant alkyl thioester groups are precisely distributed along the backbone on every five methylene carbons. Chain structure, molecular weight and molecular weight distribution of the polymers were characterized by ¹H and ¹³C NMR, and GPC. The ROMP reactions all reached high monomer conversions, and hydrogenation of the ROMP products were exhaustive. Thermal transitions and side chain crystallization behaviors of the polymer were investigated and characterized by DSC and TGA. Glass transition temperature and melting temperature of these polymers were higher than the counterparts containing ester pendants. TGA analysis indicated that all the thioester‐containing polymers exhibited moderate thermal stability, and the sulfur‐containing polymers show slightly lower thermal stability than their counterparts without sulfur. The new family of functionalized polyethylenes could be used as models of ethylene‐thioacrylate copolymers, and find applications as novel functional materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4027–4036     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Synthesis,spectral, thermal,and flammability studies of phenolphthalein polyphosphate esters

Polyphosphate esters were synthesized from phenolphthalein and aryl phosphorodichloridates by interfacial polycondensation using a phase transfer catalyst. The polymers were characterized by IR, ¹H-, ¹³C-, and ³¹P-NMR spectroscopy. The molecular weights were calculated by end group analysis using ³¹P-NMR spectral data. The thermal stability of the polymers was studied by thermogravimetry and the flammability was investigated by measuring limiting oxygen index values.     

Synthesis, characterization and thermal properties of novel PMDA-PAPD/silica hybrid network polymers

Novel PMDA-PAPD/silica hybrid polymers were synthesized by the sol-gel process. Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids, (condensed siloxane bonds designated as Q¹, Q², Q³, Q⁴, wth 3-aminopropyltriethoxysilane having mono-, di-, tri-, tetra-substituted siloxane bonds is designated as T¹, T² and T³). The results revealed that Q³, Q⁴ and T³ are the major microstructure elements in forming a network structure. The surface morphology, particle size, crystallinity and the thermal stability of the hybrids were investigated using Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). SEM and TEM revealed that the hybrids were nanocomposites. The XRD indicated that covalent bonding (Si-O-Si) between the organic and inorganic components enhanced miscibility. DSC and TGA results showed that these hybrid materials had excellent thermal stability. The heat capacities of some materials were reported for the temperature range 273 K and 363 K as no thermal anomaly was found in this temperature range.     

Mesomorphic and luminescent properties of side chain nematic liquid-crystalline polymers containing Ir(III)

Iridium-containing liquid-crystalline polymers were obtained by graft copolymerisation using poly(methylhydrogeno)siloxane, 1-methyl-4-(4-(4-vinylcyclohexyl)cyclohexyl)benzene (M₁) and an iridium complexes monomer (Ir-M₂). The series of polymers contained different molecular fractions of Ir-M₂ from 0% to 1.2%. All of these polymers showed mesomorphic behaviours. The introduction of small amount of iridium ions endowed liquid-crystalline polymers with luminescent properties. The chemical structures were characterised by IR and ¹H NMR. The mesomorphic properties and phase behaviour were investigated by differential scanning calorimetry, thermal gravimetric analysis, polarising optical microscopy and X-ray diffraction. With an increase of iridium complexes units in the polymers, the glass transition temperature (T_g) did not change significantly; the isotropic temperature (T_i) decreased. All polymers showed typical nematic marble textures, which was confirmed by X-ray diffraction. The temperatures at which 5% weight loss occurred (T_d) were greater than 300°C for the polymers. The introduction of iridium complexes units did not change the liquid-crystalline state of polymer systems. With Ir³⁺ ion contents ranging between 0.6 and 2.4 mol%, luminescent intensity of polymers gradually increased.     

Synthesis and thermal behaviours of side-chain liquid-crystalline poly[N-(4-methoxyazobenzene-4′-oxyalkyl)ethyleneimine]

A series of side-chain liquid-crystalline polymers, poly[N-(4-methoxyazobenzene- 4′-oxyalkyl)ethyleneimine](PEnZO), has been synthesised in which the number of methylene units in spacers varies from two to six. The structures of the synthesised monomers and polymers were confirmed by infrared (IR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry (DSC), polarising optical macroscopic (POM) X-ray diffraction and thermogravimetric analysis (TGA). The test results indicated that the obtained polymers exhibited thermotropic liquid-crystalline mesomorphism of nematic type with schlieren textures. It was observed that the thermal behaviours of the polymers were strongly dependent on the degree of substitution and the length of spacers. Polymers containing less than 57% of mesogenic groups did not exhibit mesogenic phase and resembled amorphous polymer. A more pronounced odd–even effect in the melting points and their enthalpy changes was observed on increasing the spacer length in which the odd members displayed lower values, which were also slightly dependent on the substitution degree of polymers. The mesomorphic temperature ranges of odd members were wider than those of even members. The decomposition temperatures of copolymers were near 230°C.     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, thermal stability and compatibility properties of new energetic polymers

Four new cross-linked polymers poly(vinyl m-nitrobenzene)-polyglycidylazides (PVMNB-GAPs) were successfully synthesized using toluene diisocyanate as the cross-linking agent. Their structure was confirmed by their FTIR, UV–Vis, ¹H and ¹³C NMR spectroscopy. Moreover, the thermal properties of cross-linked polymers were evaluated by DTA, TGA and DSC techniques, which confirmed that synthesized polymers exhibited good resistance to thermal decomposition up to 200°C. In addition, their compatibility with the main energetic components of 2,4,6-trinitrotoluene-based melt-cast explosives were also evaluated by the non-isothermal differential thermal analysis method.     

Boronated (co)polystyrene: monomer reactivity ratios,thermal behavior and flammability

Chemical modification based on incorporation of flame retardants (FR) into the polymer backbone was used in order to reduce polystyrene flammability. Boronated styrenes such as 4‐vinylphenylboronic acid (StB(OH)₂) and 6‐methyl‐2‐(4‐vinylphenyl)‐1,3,6,2‐dioxazaborocane‐4,8‐dione (StBcyclo) were applied as reactive FR. Homo‐ and copolymers of boronated styrenes and styrene (St) were synthesized with different feed ratios using free radical polymerization. It yielded in series of (co)polymers with various amounts of StB(OH)₂ and StBcyclo (5–20% mol/mol of St). Copolymer compositions were determined by ¹H NMR. The relative reactivity ratios of system St‐StBcyclo were determined by applying the Jaacks method. Glass transition temperature and thermal stability of obtained (co)polymers were determined from DSC and TGA analysis, respectively. The pyrolysis combustion flow calorimeter was applied as a tool for assessing the flammability of the synthesized (co)polymers. Copyright © 2014 John Wiley & Sons, Ltd.     

Soluble,thermally stable,flame retardant quinoline-based poly(ester amide)s

A new diamine was prepared via reaction between 8-hydroxy-5-nitroquinoline and 4-nitrobenzoyl chloride, followed by reduction of the nitro groups of the resulted compound. Novel quinoline-based poly(ester-amide)s were produced through polycondensation reactions of the prepared diamine with different diacid chlorides. The monomer and poly(ester-amide)s were characterized and properties of the polymers including solution viscosity, thermal behavior and stability, solubility, and crystallinity were studied.

High thermal stability and improved solubility was observed for the polymers, indicating successful designing of monomer and related polymers for overcoming the main issue of thermally stable polymers, i.e. the problem of increasing solubility versus high thermal stability.

Also, by changing the diacid chlorides for the preparation of poly(ester-amide)s, the structure-property relations were investigated.     

New thermally stable condensation polymers containing central ketal moieties derived from malonaldehydetetramethyl acetal and dihydroxyaromatic compounds

Abstract

A number of new condensation polymers with acetal units in the main chain and having linear and ladder-form structure and high thermal stability were synthesized by solution polycondensation of dihydroxyaromatic compounds with malonaldehydetetramethyl acetal as a reactive protected 1,3-dicarbonyl compound. Optimal conditions for polycondensation were obtained via study of the model compounds. In order to obtain high molecular weight polymers, general investigations on the influence of reaction conditions, such as monomer concentration and reaction temperature were carried out. All polymers were obtained in high yields and moderate inherent viscosity ranging from 0.25 to 0.41?dL/g. The proposed chemical structures of condensation polymers were confirmed by ¹H-NMR, ¹³C-NMR, FTIR spectroscopies, TGA, and DSC. Thermal analysis indicated that these polymers are stable up to 360?°C, and a 10% weight loss (T₁₀) were recorded on the TG curves in the temperature range of 381–411?°C in nitrogen atmosphere, indicating their good thermal stability.     

Synthesis and Characterization of Novel Methacrylate Monomers Having Pendant Oxime Esters and Their Copolymerization with Styrene

New methacrylate monomers, 2‐{[(diphenylmethylene)amino]oxy}‐2‐oxoethyl methacrylate (DPOMA) and 2‐{[(1‐phenylethylidene)ami no]oxy}‐2‐oxoethyl methacrylate (MMOMA) were prepared by reaction of sodium methacrylate with diphenylmethanone O‐(2‐chloroacetyl) oxime and 1‐phenylethanone O‐(2‐chloroacetyl) oxime, respectively. They were obtained from a reaction of chloroacetyl chloride with benzophenone oxime or acetophenone oxime. The free‐radical‐initiated copolymerization of (DPOMA) and (MMOMA) with styrene (St) were carried out in 1,4‐dioxane solution at 65°C using 2,2‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectral studies. The copolymer compositions were evaluated by nitrogen content in polymers. The reactivity ratios of the monomers were determined by the application of Fineman–Ross and Kelen–Tüdös methods. The molecular weights (M¯_w and M¯_n) and polydispersity index of the polymers were determined by using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of St in the copolymers. The activation energies of the thermal degradation of the polymers were calculated with the MHRK method. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of DPOMA or MMOMA in the copolymers. The antibacterial and antifungal effects of the monomers and polymers were also investigated on various bacteria and fungi. The photochemical properties of the polymers were investigated by UV and FTIR spectra.     

Coordination chain polymeric assemblies of trivalent lanthanides with multidentate Schiff base synthetic, spectral investigation and thermal aspects

The coordination chain polymers of La(III), Ce(III), Pr(III), Nd(III) and Sm(III) with N,N’-di(o-thiophenyl)terephthalaldehydediimine have been prepared and characterized by elemental analysis, ¹H NMR, ¹³C NMR, magnetic measurements, infrared spectra, reflectance spectra and thermogravimetric analysis. A coordination number of seven around the metal ion is suggested. The thermal decompositions of the coordination polymers have been studied. The kinetic parameters have been calculated using Freeman-Carroll method. The thermodynamic activation parameters such as entropy (S*), preexponential factor (A), enthalpy (H*) and free energy of the decomposition (G*) have been evaluated.     

SYNTHESIS,CHARACTERIZATION, AND POLYMERIZATION OF NEW METHACRYLATE ESTERS HAVING PENDANT AMIDE MOIETIES

ABSTRACT

In this paper, the synthesis of a number of new methacrylate esters containing amide group are described. The monomers produced from the reaction of corresponding α-chloro-N-aryl or -N-alkyl acetamides with sodium methacrylate were polymerized with AIBN as initiator. The monomers and their polymers were characterized by IR, ¹H- and ¹³C-NMR spectroscopy. The glass transition temperature and thermal decomposition temperature of the polymers were investigated by DSC-50 and TGA-50 thermobalance, respectively. The photocrosslinking properties of the polymers were also discussed.     

Synthesis and characterization of processable heat resistant co-poly(ester-amide)s containing cyclopentylidene moiety

New cyclopentylidene ring-containing diamino-diesters, 1,1-bis(3-aminobenzoyloxy phenyl) cyclopentane, was prepared through reaction of cyclopentanone with two moles of phenol to yield 1,1-bis (4-hydroxy phenyl) cyclopentane (BHPP) (I), the resulting diol (I) on reaction with 3-nitrobenzoyl chloride in N,N-dimethyl acetamide (DMAc) and triethyl amine yield 1,1-bis(3-nitrobenzoyloxy phenyl) cyclopentane (II) which on finally reduced by catalytic hydrogenation in presence of 10% Pd/C in DMAc and stirred at room temperature under a 4 kg/cm² hydrogen pressure yields 1,1-bis(3-aminobenzoyloxy phenyl) cyclopentane (III) (m-BABPP). The structure of novel m-diester-diamine was confirmed by FT-IR, ¹H-NMR and ¹³C-NMR. A series of new m-poly (ester-amide)s and co-poly(ester-amide)s were synthesized by using the solution polycondensation method of novel diamine (III) with IPC and TPC in various mole proportion. These novel polymers were characterized by FTIR spectroscopy, solubility, inherent viscosity and thermal analysis and XRD studies. Inherent viscosities of these polymers were in the range 0.30 to 0.46 dL/g indicating moderate molecular weight built-up. These polymers exhibited excellent solubility in various polar aprotic solvents such as NMP, Pyridine. These polymers were partially soluble in DMSO, DMAc, DMF etc.

X-Ray diffraction pattern of polymers showed that introduction of cardo moiety containing ester linkage would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA showed excellent thermal stability of polymers. The structure -property correlation among these poly(ester-amide)s were studied, in view of these polymer's potential applications as processable high temperature resistance materials.     

1,2-Dinitrile polymers. I. Hompolymers and copolymers of fumaronitrile,maleonitrile, and succinonitrile

Homopolymers and copolymers of fumaronitrile, maleonitrile, and succinonitrile have been prepared by using medium high temperature free-radical initiators. Black, nonfusible but soluble polymers were obtained. The spectroscopic and chemical evidence indicated a structure containing α-pyrrolenine rings and no free nitrile groups in the fumaronitrile and maleonitrile polymers and 1-pyrroline rings and free nitrile groups in the succinonitrile polymers. The polymers possessed good thermal stability, free spin concentration of 10¹⁷–10¹⁸ spins/g, and an ac conductivity at room temperature in nitrogen of 10^?6 to 10^?8 ohm^?1 cm^?1.     

Synthesis and Characterization of Organosoluble Poly(imide-ether)s with Bulky 2,3-Diaryl Imidazole Moiety: Study Physical,Thermal and Optical Properties

Two new symmetrical diamines were designed and synthesized having different functional groups such as a pair of phenyl ether linkages, 2,3-diaryl substituted imidazole rings and CF₃ groups as pendant, and characterized by FT-IR, ¹H and ¹³C-NMR spectroscopy and elemental analysis. A series of new fluorescent poly(imide-ether)s (PIEs) was prepared by polymerization of the diamines with commercial tetracarboxylic dianhydrides such as pyromellitic dianhydride and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride. The resulting PIEs were amorphous and had intrinsic viscosity [η] in the range of 0.42–0.51 dL/g. The weight average molecular weights (Mw) of these polymers were measured by GPC and were in the range of 28658–35595 g/mol with molecular weight distribution (MWD) of 2.12–2.27. These polymers were readily soluble in a variety of organic solvents and formed low-colored and flexible thin films with cut-off wavelength (λ₀) in the range of 385–420 nm, and all PIEs films exhibited high optical transparency. They also possessed good thermal stability with 10% weight loss temperatures (T_10%) in the range 486–537°C in N₂. The glass transition temperatures (T_g) of PIEs are in the range 251–324°C. These polymers showed fluorescence emission in film and in solution at 459–476 nm with the quantum yields in the range 4–12%.