Extractive scintillating resin for 99Tc quantification in aqueous solutions

A method utilizing extractive scintillating resin for ⁹⁹Tcmonitoring in aqueous solutions is presented. These extractive scintillatorscombine analyte selective uptake and scintillating properties to produce dualfunctionality analytical resins. These resins were produced by (1) co-locatedextraction chromatographic resin and plastic scintillating beads, (2) immobilizingfluors in macroporous polystyrene supports to which chains of monomethylatedpolyethylene glycol have been grafted and (3) co-immobilizing organic scintillatingfluors and a quaternary ammonium extractant (Aliquat-336) within macroporousacrylic and polystyrene supports. The first and third resins selectively extractpertechnetate ions from dilute acid whereas the second resin selectively extractspertechnetate ions from high ionic strength solutions. These resins were utilizedin ~0.20 ml pore volume columns while ⁹⁹Tc was continually monitoredwith commercially available scintillation detection systems. Manual and automatedmicrofluidics were used to deliver sample and reagent solution for loadingand elution of the ⁹⁹Tc. The detection efficiencies were determinedto be 45 and 70% for acrylic and polystyrene based resins, respectively, andindependent of extractant. Minimum detectable ⁹⁹Tc concentrationusing the Aliquat-336/acrylic-based resin was 6.2 Bq . l –1 for a 50-mlsample and 30-minute count time. The new methodology was applied towards analysisof contaminated groundwater samples and nuclear waste simulants.     

A straightforward preparation of a polystyrene thiol resin

A mild and efficient two-step synthesis of a polystyrene thiol resin is reported. Firstly, a polystyrene resin was reacted with an activated sulfoxide to afford the resin bound bis-(2-methoxy-carbonylethyl)-sulfonium trifluoromethanesulfonate. Smooth β-elimination based dealkylations afforded the polystyrene thiol resin with good and controlled loading. Its reactivity was assessed through a derivatisation step.     

Composite Nickel–Polystyrene Electrodes: Surface State of Nickel and Ion Transfer

Nickel–polystyrene composite materials produced by the chemical deposition of nickel on polystyrene beads exhibit high conductivity at a nickel concentration of less than one percent by volume. These composites exhibit a higher sensitivity to Ni²⁺ions (RT/zF) than bulk nickel. According to X-ray photoelectron spectroscopy data, the increased sensitivity of nickel–polystyrene electrodes is due to the formation of a modified surface layer of the composite containing a nickel–polystyrene complex and to direct Ni²⁺ion exchange at the interface between the solution and this layer.     

Interactions of ADP-stimulated human platelets with PEGylated polystyrene substrates prepared by surface amidation

A study primarily focused on the interactions between ADP-stimulated human platelets and PEGylated polystyrene substrates is described in this paper. The platelet–surface interactions were investigated using colorimetric acid phosphatase assay. Two types of amine-containing polymeric hydrogel materials based on poly(ethylene glycol) (PEG), H₂N–PEG–OCH₃ and H₂N–PEG–NH₂, were used to PEGylate polystyrene surfaces derivatized with maleic anhydride by amidation at alkaline pH. In addition, comparative studies using surfaces non-covalently adsorbed by bovine serum albumin (BSA) or fibrinogen (Fg) were also conducted. The assay results showed that no significant platelet adhesion was observed when PEGylated surfaces or BSA-coated surfaces were exposed to unstimulated gel-filtered platelets (GFP). However, upon ADP-stimulation, platelet adhesion to the surfaces under investigation in this study all increased to varying degrees. Most importantly, the results showed that polystyrene surfaces PEGylated using H₂N–PEG–NH₂ were most effective in resisting platelet adhesion when assays were performed using ADP-stimulated GFP. By PEGylating the surfaces of polystyrene microtiter wells via the amidation reaction described in this paper, it is demonstrated that (i) higher degree of surface PEGylation is favored at more alkaline pH and (ii) polystyrene substrates capable of more effectively resisting the adhesion of ADP-stimulated GFP can be obtained by the PEGylation reaction carried out at pH 9.1 using H₂N–PEG–NH₂.     

Polystyrene‐modified novolac epoxy resin/clay nanocomposite: Synthesis,and characterization

A polystyrene‐modified epoxidized novolac resin/montmorillonite nanocomposite was fabricated and characterized successfully. For this purpose, novolac resin (NR) was epoxidized through the reaction of phenolic hydroxyl group with epichlorohydrin in super basic medium to produce epoxidized novolac resin (ENR). Afterward, a polystyrene was synthesized by atom transfer radical polymerization (ATRP) technique, and then brominated at the benzylic positions using N‐bromosuccinimide (NBS). The brominated polystyrene (PSt‐Br) was reacted with ethanolamine in basic medium in order to afford an amine‐functionalized polystyrene (PSt‐NH₂). An organo‐modified montmorillonite (O‐MMT) was synthesized through the treatment of MMT with hexadecyl trimethyl ammonium chloride salt. Finally, ENR‐PSt/MMT nanocomposite was fabricated through curing a mixture of ENR (70 wt.%) and O‐MMT (5 wt.%) with PSt‐NH₂ (25 wt.%). Transition electron microscopy (TEM) and powder X‐ray diffraction (XRD) analysis revealed that the fabricated nanocomposite has an exfoliated structure. Thermal property studies using thermogravimetric analysis (TGA) showed that the curing of ENR by PSt‐NH₂, as well as incorporation of a small amount of MMT have synergistic effect on the thermal stability of the ENR resin.     

Separation of titanium, iron and aluminium on a chelating resin with benzoylphenylhydroxylamine group and application to bauxite and clay

Summary A chelating polystyrene based resin containing N-benzoyl-N-phenylhydroxylamine has been sythesized by two methods and characterized. Conditions for quantitative separation of Ti(IV), Fe(III) and Al(III) on the resin have been studied. A method has been developed for the determination of these three metal ions in bauxite or clay samples after their separation on the resin with recoveries of 98.5–99.5% for different metal ions. The maximum sorption values are observed at pH 1, 2.5 and 2.5 for Ti(IV), Fe(III) and Al(III), respectively, which are recovered by successive elution with 1 mol/l H₂SO₄, 2 mol/l HCl and 4 mol/l H₂SO₄ in the above order.     

A new analytical method for anchoring quantification of amines on resin support

A rapid and quantitative method for monitoring the efficiency of coupling of amino compounds to polystyrene resin through a carbamate linker has been developed. para-Nitrophenyl carbonate activating group has been shown to release a valuable chromophore for quantitatively monitoring the progress and the yield of the reaction.     

Selectivity behavior of low-capacity, partially sulfonated, macroporous resin beads

Cation-exchange resins with capacities ranging from 0.23 to 3.70 mequiv./g were prepared by sulfonation of highly cross-linked macroporous polystyrene resins. Distribution coefficients for exchange of hydrogen-form resin for polyvalent metal cations in 1 M acid show marked increases with increasing resin capacity.     

The analysis of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO® resin) in mixtures of PPO resin,polystyrene, and copolymers of PPO resin and polystyrene

A method of determining the quantity of ungrafted poly(2,6-dimethyl-1,4-phenylene oxide) (PPO®

1 Trademark of General Electric Company.

resin) in mixtures of such polyphenylene oxide or PPO resin, polystyrene (PS), and graft copolymers of PPO resin and PS is described. The technique is a combination of physical and chemical separations and gel permeation chromatographic (GPC) analysis. The extent of grafting on PPO resin and the quantity of ungrafted PPO resin were calculated from molecular weight data and compositional analysis.     

Parallel synthesis of unsymmetrically substituted tetraphenyl porphyrins on Wang resin

A method for synthesizing combinatorial libraries of unsymmetrically substituted tetra-meso-phenyl porphyrins on polystyrene based resin is described. Attachment of 5,15-dibromo-10-(4-hydroxyphenyl)-20-(4-nitrophenyl)porphyrin onto brominated Wang resin gave a convenient scaffold for the synthesis of photoactive porphyrin libraries with three points for generating diversity. An array of nine TPP derivatives was prepared by sequential Suzuki coupling/nitro-reduction and acylation protocols.     

Development of self-indicating resin

Previously, we have reported the development and application of self-indicating resins (SIR), materials which can indicate presence or absence of amines in the reaction solution by the conspicuous color change of a phenolsulfophthalein type dye immobilized on resin beads [2a]. Although the functionality necessary for attaching the dye to the resins could be readily introduced by the Suzuki-Miyaura coupling during the synthesis of the SIR 1, this approach was only applicable to the dyes containing suitable functionality for the cross-coupling reaction. In this article we describe a new approach of immobilizing the indicating dyes onto the resin support. The dyes suitable for loading onto aminomethyl polystyrene (PS) resin were prepared by Friedel-Crafts reaction of 2-sulfoterephthalic anhydride with a wide range of phenols. Using this new route, the SIR 6c was readily prepared in >100g quantities. Use of the SIR 6c in the synthesis of a 144 member urea library was demonstrated and the SIR successfully indicated the endpoint of the reaction between amines and isocyanates.     

Synthesis and application of polytetrahydrofuran-grafted polystyrene (PS-PTHF) resin supports for organic synthesis

Cross-linked polystyrene (PS) with polytetrahydrofuran (PTHF) chains were prepared for use in solid phase organic synthesis (SPOS). The resins were prepared from styrene, styrene-PTHF macromonomers and cross-linkers 1,4-bis[4-vinylphenoxy]butane or divinylbenzene by suspension polymerization. The styrene-PTHF macromonomers were prepared by cationic polymerization of 4-vinylbenzyl bromide and 4-(4-vinylphenoxy)butyl iodide activated by silver hexafluoroantimonate and 4-(5-hydroxypentyl)styrene activated by triflic anhydride. Alternatively, polytetrahydrofuran-grafted polystyrene (PS-PTHF) resins could also be directly prepared from 5-hydroxypentyl JandaJel by cationic polymerization using triflic anhydride as the initiator. These PS-PTHF resins exhibited good swelling characteristics across a wide spectrum of polar and non-polar solvents. These resins were used in the synthesis of 3-methyl-1-phenyl-2-pyrazolin-5-one, which requires β-ketoester formation at low temperature (−78 °C), resulting in good yield and product purity; whereas the same synthesis carried out on PEG-grafted PS (PS-PEG) resin resulted in incomplete synthesis.     

Synthesis and plasmonic properties of silver and gold nanoshells on polystyrene cores of different size and of gold–silver core–shell nanostructures

Simple methods of preparing silver and gold nanoshells on the surfaces of monodispersed polystyrene microspheres of different sizes as well as of silver nanoshells on free-standing gold nanoparticles are presented. The plasmon resonance absorption spectra of these materials are presented and compared to predictions of extended Mie scattering theory. Both silver and gold nanoshells were grown on polystyrene microspheres with diameters ranging from 188 to 543 nm. The commercially available, initially carboxylate-terminated polystyrene spheres were reacted with 2-aminoethanethiol hydrochloride (AET) to yield thiol-terminated microspheres to which gold nanoparticles were then attached. Reduction of silver nitrate or gold hydroxide onto these gold-decorated microspheres resulted in increasing coverage of silver or gold on the polystyrene core. The nanoshells were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis spectroscopy. By varying the core size of the polystyrene particles and the amount of metal (silver or gold) reduced onto them, the surface plasmon resonance of the nanoshell could be tuned across the visible and the near-infrared regions of the electromagnetic spectrum. Necklace-like chain aggregate structures of gold core–silver shell nanoparticles were formed by reducing silver nitrate onto free citrate-gold nanoparticles. The plasmon resonance absorption of these nanoparticles could also be systematically tuned across the visible spectrum.     

A convenient semicarbazide resin for the solid-phase synthesis of peptide ketones and aldehydes

Use of a semicarbazide resin for the solid-phase preparation of peptide ketones and aldehyde led to optimal results in terms of both purity of the final product and overall yield. This resin was prepared without complication by activation of the commercial available aminomethyl polystyrene with CDI at room temperature, followed by treatment with tert-butyl carbazate. Furthermore, the TNBSA colorimetric assay has been adapted for checking the incorporation of the carbonyl moiety onto hydrazine-based resins.     

Efficient procedure for the preparation of (vinyl)polystyrene resin

(Vinyl)polystyrene resin is prepared in one step by treatment of Merrifield resin with an excess dimethylsulfonium methylide.     

High-performance liquid chromatography ofα-amino acids on a polystyrene resin with fixed ligands of the type (R)-N′, N′-dibenzyl-1,2-propanediamine

Summary A cross-linked polystyrene resin with fixed ligands of the type (R)-N, N-dibenzyl-1,2-propanediamine in the form of a copper(II) complex displays high enantio-selectivity in ligand-exchange chromatography of amino acids. A microbore column (100 mm×1 mm i.d.) packed with angular particles of dp=5–10 m generated up to 3500 theoretical plates, enabling a complete resolution of a mixture of three racemic amino acids into six components under isocratic conditions.12th publication in the series dealing with the ligand-exchange chromatography of racemates. Previous publications: ref. [1].     

Synthesis of on resin poly(propylene imine) dendrimer and its use as organocatalyst

Solid phase synthesis of poly(propylene imine) dendrimer is described. An iterative synthesis including double Michael addition of acrylonitrile to the primary amino groups on crosslinked polystyrene support followed by reduction of nitrile groups to amino groups give poly(propylene imine) dendrimers up to third generation attached to the polystyrene support. The supported dendrimer is used as an organocatalyst to Knoevenagel condensations. The supported catalyst showed good selectivity and the product was obtained in excellent yield under green reaction conditions. Densely packed amino groups enhance catalysis by a co-operative effect. The catalyst is recoverable and reusable.     

Comparative resin kinetics using in situ fluorescence measurements

The aminolysis of a novel activated ester resin was utilized for kinetic study via continuous in situ fluorescence measurements. A variety of resin compositions (polystyrene, JandaJel, ArgoPore, TentaGel, NovaGel, and PEGA) and solvents (dimethylformamide, acetonitrile, tetrahydrofuran, 1,2-dichlorethane, and toluene) were tested to compare their effects on the reaction rate. A linear relationship between the reaction rate and (solvent polarity x swelling of resin) was elucidated for the aminolysis reaction.     

Compression studies on aqueous polystyrene latices

An apparatus, that allows simultaneous measurements to be made of excess osmotic pressure and optical diffraction of polymer colloid dispersions, has been constructed. Results are reported for monodisperse polystyrene latices at several salt concentrations. An interesting feature of the results is a clear indication of a co-existence region occurring with particles of 182 nm diameter in sodium chloride concentrations of 10^–4 mol dm^–3     

Use of Hypercrosslinked Polystyrene for the Determination of Pyrocatechol, Resorcinol, and Hydroquinone by Reversed-Phase HPLC with Dynamic On-line Preconcentration

Adsorption isotherms of pyrocatechol, resorcinol, and hydroquinone on hypercrosslinked polystyrene MN-200 are described by the Langmuir equation; distribution coefficients of these compounds are 1500, 550, and 370 mL/g, respectively; breakthrough capacities are 15.3, 11.2, and 11.3 mg/g, respectively. The comparison of hypercrosslinked polystyrene with other sorbents in the efficiency of the dynamic preconcentration of hydroxyphenols demonstrated its advantages. A procedure is proposed for the determination of pyrocatechol, resorcinol, and hydroquinone in water by high-performance liquid chromatography with dynamic on-line preconcentration on a concentrating column instead of the injector loop, which provides the determination of these compounds at concentrations down to 2–3 g/L. The accuracy of the procedure was verified by the added–found method with a water sample.