Calcite‐CO2 mixed into CO2‐free air: a new CO2‐in‐air stable isotope reference material for the VPDB scale

In order to generate a reliable and long‐lasting stable isotope ratio standard for CO₂ in samples of clean air, CO₂ is liberated from well‐characterized carbonate material and mixed with CO₂‐free air. For this purpose a dedicated acid reaction and air mixing system (ARAMIS) was designed. In the system, CO₂ is generated by a conventional acid digestion of powdered carbonate. Evolved CO₂ gas is mixed and equilibrated with a prefabricated gas comprised of N₂, O₂, Ar, and N₂O at close to ambient air concentrations. Distribution into glass flasks is made stepwise in a highly controlled fashion. The isotopic composition, established on automated extraction/measurement systems, varied within very small margins of error appropriate for high‐precision air‐CO₂ work (about ±0.015‰ for δ¹³C and ±0.025‰ for δ¹⁸O). To establish a valid δ¹⁸O relation to the VPDB scale, the temperature dependence of the reaction between 25 and 47°C has been determined with a high level of precision. Using identical procedures, CO₂‐in‐air mixtures were generated from a selection of reference materials; (1) the material defining the VPDB isotope scale (NBS 19, δ¹³C = +1.95‰ and δ¹⁸O = ?2.2‰ exactly); (2) a local calcite similar in isotopic composition to NBS 19 (‘MAR‐J1’, δ¹³C = +1.97‰ and δ¹⁸O = ?2.02‰), and (3) a natural calcite with isotopic compositions closer to atmospheric values (‘OMC‐J1’, δ¹³C = ?4.24‰ and δ¹⁸O = ?8.71‰). To quantitatively control the extent of isotope‐scale contraction in the system during mass spectrometric measurement other available international and local carbonate reference materials (L‐SVEC, IAEA‐CO‐1, IAEA‐CO‐8, CAL‐1 and CAL‐2) were also processed. As a further control pure CO₂ reference gases (Narcis I and II, NIST‐RM 8563, GS19 and GS20) were mixed with CO₂‐free synthetic air. Independently, the pure CO₂ gases were measured on the dual inlet systems of the same mass spectrometers. The isotopic record of a large number of independent batches prepared over the course of several months is presented. In addition, the relationship with other implementations of the VPDB‐scale for CO₂‐in‐air (e.g. CG‐99, based on calibration of pure CO₂ gas) has been carefully established. The systematic high‐precision comparison of secondary carbonate and CO₂ reference materials covering a wide range in isotopic composition revealed that assigned δ‐values may be (slightly) in error. Measurements in this work deviate systematically from assigned values, roughly scaling with isotopic distance from NBS 19. This finding indicates that a scale contraction effect could have biased the consensus results. The observation also underlines the importance of cross‐contamination errors for high‐precision isotope ratio measurements. As a result of the experiments, a new standard reference material (SRM), which consists of two 5‐L glass flasks containing air at 1.6 bar and the CO₂ evolved from two different carbonate materials, is available for distribution. These ‘J‐RAS’ SRM flasks (‘Jena‐Reference Air Set’) are designed to serve as a high‐precision link to VPDB for improving inter‐laboratory comparability. a Copyright © 2005 John Wiley & Sons, Ltd.     

CO2 isotope analyses using large air samples collected on intercontinental flights by the CARIBIC Boeing 767

Analytical details for ¹³C and ¹⁸O isotope analyses of atmospheric CO₂ in large air samples are given. The large air samples of nominally 300 L were collected during the passenger aircraft‐based atmospheric chemistry research project CARIBIC and analyzed for a large number of trace gases and isotopic composition. In the laboratory, an ultra‐pure and high efficiency extraction system and high‐quality isotope ratio mass spectrometry were used. Because direct comparison with other laboratories was practically impossible, the extraction and measurement procedures were tested in considerable detail. Extracted CO₂ was measured twice vs. two different working reference CO₂ gases of different isotopic composition. The two data sets agree well and their distributions can be used to evaluate analytical errors due to isotope measurement, ion corrections, internal calibration consistency, etc. The calibration itself is based on NBS‐19 and also verified using isotope analyses on pure CO₂ gases (NIST Reference Materials (RMs) and NARCIS CO₂ gases). The major problem encountered could be attributed to CO₂‐water exchange in the air sampling cylinders. This exchange decreased over the years. To exclude artefacts due to such isotopic exchange, the data were filtered to reject negative δ¹⁸O(CO₂) values. Examples of the results are given. Copyright © 2009 John Wiley & Sons, Ltd.     

Nicotine,acetanilide and urea multi‐level 2H‐, 13C‐ and 15N‐abundance reference materials for continuous‐flow isotope ratio mass spectrometry

Accurate determinations of stable isotope ratios require a calibration using at least two reference materials with different isotopic compositions to anchor the isotopic scale and compensate for differences in machine slope. Ideally, the δ values of these reference materials should bracket the isotopic range of samples with unknown δ values. While the practice of analyzing two isotopically distinct reference materials is common for water (VSMOW‐SLAP) and carbonates (NBS 19 and L‐SVEC), the lack of widely available organic reference materials with distinct isotopic composition has hindered the practice when analyzing organic materials by elemental analysis/isotope ratio mass spectrometry (EA‐IRMS). At present only L‐glutamic acids USGS40 and USGS41 satisfy these requirements for δ¹³C and δ¹⁵N, with the limitation that L‐glutamic acid is not suitable for analysis by gas chromatography (GC). We describe the development and quality testing of (i) four nicotine laboratory reference materials for on‐line (i.e. continuous flow) hydrogen reductive gas chromatography‐isotope ratio mass‐spectrometry (GC‐IRMS), (ii) five nicotines for oxidative C, N gas chromatography‐combustion‐isotope ratio mass‐spectrometry (GC‐C‐IRMS, or GC‐IRMS), and (iii) also three acetanilide and three urea reference materials for on‐line oxidative EA‐IRMS for C and N. Isotopic off‐line calibration against international stable isotope measurement standards at Indiana University adhered to the ‘principle of identical treatment’. The new reference materials cover the following isotopic ranges: δ²H_nicotine ?162 to ?45‰, δ¹³C_nicotine ?30.05 to +7.72‰, δ¹⁵N_nicotine ?6.03 to +33.62‰; δ¹⁵N_acetanilide +1.18 to +40.57‰; δ¹³C_urea ?34.13 to +11.71‰, δ¹⁵N_urea +0.26 to +40.61‰ (recommended δ values refer to calibration with NBS 19, L‐SVEC, IAEA‐N‐1, and IAEA‐N‐2). Nicotines fill a gap as the first organic nitrogen stable isotope reference materials for GC‐IRMS that are available with different δ¹⁵N values. Comparative δ¹³C and δ¹⁵N on‐line EA‐IRMS data from 14 volunteering laboratories document the usefulness and reliability of acetanilides and ureas as EA‐IRMS reference materials. Published in 2009 by John Wiley & Sons, Ltd.     

Effects of long‐term exposure to elevated CO2 conditions in slow‐growing plants using a 12C‐enriched CO2‐labelling technique

Despite their relevancy, long‐term studies analyzing elevated CO₂ effect in plant production and carbon (C) management on slow‐growing plants are scarce. A special chamber was designed to perform whole‐plant above‐ground gas‐exchange measurements in two slow‐growing plants (Chamaerops humilis and Cycas revoluta) exposed to ambient (ca. 400 µmol mol^?1) and elevated (ca. 800 µmol mol^?1) CO₂ conditions over a long‐term period (20 months). The ambient isotopic ¹³C/¹²C composition (δ¹³C) of plants exposed to elevated CO₂ conditions was modified (from ca. ?12.8‰ to ca. ?19.2‰) in order to study carbon allocation in leaf, shoot and root tissues. Elevated CO₂ increased plant growth by ca. 45% and 60% in Chamaerops and Cycas, respectively. The whole‐plant above‐ground gas‐exchange determinations revealed that, in the case of Chamaerops, elevated CO₂ decreased the photosynthetic activity (determined on leaf area basis) as a consequence of the limited ability to increase C sink strength. On the other hand, the larger C sink strength (reflected by their larger CO₂ stimulatory effect on dry mass) in Cycas plants exposed to elevated CO₂ enabled the enhancement of their photosynthetic capacity. The δ¹³C values determined in the different plant tissues (leaf, shoot and root) suggest that Cycas plants grown under elevated CO₂ had a larger ability to export the excess leaf C, probably to the main root. The results obtained highlighted the different C management strategies of both plants and offered relevant information about the potential response of two slow‐growing plants under global climate change conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

A dynamic soil chamber system coupled with a tunable diode laser for online measurements of δ13C, δ18O,and efflux rate of soil‐respired CO2

High frequency observations of the stable isotopic composition of CO₂ effluxes from soil have been sparse due in part to measurement challenges. We have developed an open‐system method that utilizes a flow‐through chamber coupled to a tunable diode laser (TDL) to quantify the rate of soil CO₂ efflux and its δ¹³C and δ¹⁸O values (δ¹³C_R and δ¹⁸O_R, respectively). We tested the method first in the laboratory using an artificial soil test column and then in a semi‐arid woodland. We found that the CO₂ efflux rates of 1.2 to 7.3 µmol m^?2 s^?1 measured by the chamber‐TDL system were similar to measurements made using the chamber and an infrared gas analyzer (IRGA) (R² = 0.99) and compared well with efflux rates generated from the soil test column (R² = 0.94). Measured δ¹³C and δ¹⁸O values of CO₂ efflux using the chamber‐TDL system at 2 min intervals were not significantly different from source air values across all efflux rates after accounting for diffusive enrichment. Field measurements during drought demonstrated a strong dependency of CO₂ efflux and isotopic composition on soil water content. Addition of water to the soil beneath the chamber resulted in average changes of +6.9 µmol m^?2 s^?1, ?5.0‰, and ?55.0‰ for soil CO₂ efflux, δ¹³C_R and δ¹⁸O_R, respectively. All three variables initiated responses within 2 min of water addition, with peak responses observed within 10 min for isotopes and 20 min for efflux. The observed δ¹⁸O_R was more enriched than predicted from temperature‐dependent H₂O‐CO₂ equilibration theory, similar to other recent observations of δ¹⁸O_R from dry soils (Wingate L, Seibt U, Maseyk K, Ogee J, Almeida P, Yakir D, Pereira JS, Mencuccini M. Global Change Biol. 2008; 14: 2178). The soil chamber coupled with the TDL was found to be an effective method for capturing soil CO₂ efflux and its stable isotope composition at high temporal frequency. Published in 2010 by John Wiley & Sons, Ltd.     

Membrane permeation continuous‐flow isotope ratio mass spectrometry for on‐line carbon isotope ratio determination

Gaseous membrane permeation (MP) technologies have been combined with continuous‐flow isotope ratio mass spectrometry for on‐line δ¹³C measurements. The experimental setup of membrane permeation‐gas chromatography/combustion/isotope ratio mass spectrometry (MP‐GC/C/IRMS) quantitatively traps gas streams in membrane permeation experiments under steady‐state conditions and performs on‐line gas transfer into a GC/C/IRMS system. A commercial polydimethylsiloxane (PDMS) membrane sheet was used for the experiments. Laboratory tests using CO₂ demonstrate that the whole process does not fractionate the C isotopes of CO₂. Moreover, the δ¹³C values of CO₂ permeated on‐line give the same isotopic results as off‐line static dual‐inlet IRMS δ¹³C measurements. Formaldehyde generated from aqueous formaldehyde solutions has also been used as the feed gas for permeation experiments and on‐line δ¹³C determination. The feed‐formaldehyde δ¹³C value was pre‐determined by sampling the headspace of the thermostated aqueous formaldehyde solution. Comparison of the results obtained by headspace with those from direct aqueous formaldehyde injection confirms that the headspace sampling does not generate isotopic fractionation, but the permeated formaldehyde analyzed on‐line yields a ¹³C enrichment relative to the feed δ¹³C value, the isotopic fractionation being 1.0026 ± 0.0003. The δ¹³C values have been normalized using an adapted two‐point isotopic calibration for δ¹³C values ranging from ?42 to ?10‰. The MP‐GC/C/IRMS system allows the δ¹³C determination of formaldehyde without chemical derivatization or additional analytical imprecision. Copyright © 2009 John Wiley & Sons, Ltd.     

Short‐term dynamics of isotopic composition of leaf‐respired CO2 upon darkening: measurements and implications

Recent advances in understanding the metabolic origin and the temporal dynamics in δ¹³C of dark‐respired CO₂ (δ¹³C_res) have led to an increasing awareness of the importance of plant isotopic fractionation in respiratory processes. Pronounced dynamics in δ¹³C_res have been observed in a number of species and three main hypotheses have been proposed: first, diurnal changes in δ¹³C of respiratory substrates; second, post‐photosynthetic discrimination in respiratory pathways; and third, dynamic decarboxylation of enriched carbon pools during the post‐illumination respiration period. Since different functional groups exhibit distinct diurnal patterns in δ¹³C_res (ranging from 0 to 10‰ diurnal increase), we explored these hypotheses for different ecotypes and environmental (i.e. growth light) conditions. Mass balance calculations revealed that the effect of respiratory substrates on diurnal changes in δ¹³C_res was negligible in all investigated species. Further, rapid post‐illumination changes in δ¹³C_res (30 min), which increased from 2.6‰ to 5‰ over the course of the day, were examined by positional ¹³C‐labelling to quantify changes in pyruvate dehydrogenase (PDH) and Krebs cycle (KC) activity. We investigated the origin of these dynamics with Rayleigh mass balance calculations based on theoretical assumptions on fractionation processes. Neither the estimated changes of PDH and KC, nor decarboxylation of a malate pool entirely explained the observed pattern in δ¹³C_res. However, a Rayleigh fractionation of ¹²C‐discriminating enzymes and/or a rapid decline in the decarboxylation rate of an enriched substrate pool may explain the post‐illumination peak in δ¹³C_res. These results are highly relevant since δ¹³C_res is used in large‐scale carbon cycle studies. Copyright © 2009 John Wiley & Sons, Ltd.     

Reconstructing bulk isotope ratios from compound‐specific isotope ratios

Carbon isotope analysis by bulk elemental analysis coupled with isotope ratio mass spectrometry has been the mainstay of δ¹³C analyses both at natural abundance and in tracer studies. More recently, compound‐specific isotope analysis (CSIA) has become established, whereby organic constituents are separated online by gas or liquid chromatography before oxidation and analysis of CO₂ for constituent δ¹³C. Theoretically, there should be concordance between bulk δ¹³C measurements and carbon‐weighted δ¹³C measurements of carbon‐containing constituents. To test the concordance between the bulk and CSIA, fish oil was chosen because the majority of carbon in fish oil is in the triacylglycerol form and ～95% of this carbon is amenable to CSIA in the form of fatty acids. Bulk isotope analysis was carried out on aliquots of oil extracted from 55 fish samples and δ¹³C values were obtained. Free fatty acids (FFAs) were produced from the oil samples by saponification and derivatised to fatty acid methyl esters (FAMEs) for CSIA by gas chromatography/combustion/isotope ratio mass spectrometry. A known amount of an internal standard (C15:0 FAME) was added to allow analyte quantitation. This internal standard was also isotopically calibrated in both its FFA (δ¹³C = ?34.30‰) and FAME (δ¹³C = ?34.94‰) form. This allowed reporting of FFA δ¹³C from measured FAME δ¹³C values. The bulk δ¹³C was reconstructed from CSIA data based on each FFA δ¹³C and the relative amount of CO₂ produced by each analyte. The measured bulk mean δ¹³C (SD) was ?23.75‰ (1.57‰) compared with the reconstructed bulk mean δ¹³C of ?23.76 (1.44‰) from CSIA and was not significantly different. Further analysis of the data by the Bland‐Altman method did not show particular bias in the data relative to the magnitude of the measurement. Good agreement between the methods was observed with the mean difference between methods (range) of 0.01‰ (?1.50 to 1.30). Copyright © 2010 John Wiley & Sons, Ltd.     

2H/1H Ratio Analysis of Flavor Compounds by On‐Line Gas Chromatography Pyrolysis Isotope Ratio Mass Spectrometry (HRGC‐P‐IRMS): Benzaldehyde

Isotope ratio monitoring gas chromatography‐mass spectrometry of the ²H/¹H ratio by pyrolysis isotope ratio mass spectrometry (P‐IRMS) was used to analyze benzaldehyde originating from various sources. Based on the δ²H_SMOW value of an authentic reference sample determined with an elemental analyzer (EA), the range of reproducibility and linearity was checked. Correct (EA related) and reproducible data were obtained for sample amounts >0.6 μg benzaldehyde (on column). In another series of experiments, the influence of sample preparation, i. e. simultaneous distillation‐extraction (SDE) was found to be negligible. The following ranges of δ²H_SMOW values were determined for benzaldehyde using five types of samples, i. e. (i) synthetic (δ²H_SMOW –78 to –85‰, ex benzal chloride; +420 to +668‰, ex toluene) and ‘natural’ (including ‘ex‐cassia’) references (δ²H_SMOW –83 to –144‰); (ii) bitter almond oils (δ²H_SMOW –113 to –148‰); (iii) fruits (δ²H_SMOW –111 to –146‰); (iv) kernels (δ²H_SMOW –115 to –188‰); and (v) leaves (δ²H_SMOW –165 to –189‰).     

Testing the use of septum‐capped vials for 13C‐isotope abundance analysis of carbon dioxide

Studying ecosystem processes in the context of carbon cycling and climate change has never been more important. Stable carbon isotope studies of gas exchange within terrestrial ecosystems are commonly undertaken to determine sources and rates of carbon cycling. To this end, septum‐capped vials (‘Exetainers’) are often used to store samples of CO₂ prior to mass spectrometric analysis. To evaluate the performance of such vials for preserving the isotopic integrity (δ¹³C) and concentration of stored CO₂ we performed a rigorous suite of tests. Septum‐capped vials were filled with standard gases of varying CO₂ concentrations (～700 to 4000 ppm), δ¹³C values (approx. ?26.5 to +1.8‰_V‐PDB) and pressures (33 and 67% above ambient), and analysed after a storage period of between 7 and 28 days. The vials performed well, with the vast majority of both isotope and CO₂ concentration results falling within the analytical uncertainty of chamber standard gas values. Although the study supports the use of septum‐capped vials for storing samples prior to mass spectrometric analysis, it does highlight the need to ensure that sampling chamber construction is robust (air‐tight). Copyright © 2010 John Wiley & Sons, Ltd.     

N2: a potential pitfall for bulk 2H isotope analysis of explosives and other nitrogen‐rich compounds by continuous‐flow isotope‐ratio mass spectrometry

Observations made during the ¹³C isotope analysis of gaseous CO₂ in the simultaneous presence of argon in the ion source of the isotope ratio mass spectrometer prompted us to investigate what influence the simultaneous presence of nitrogen would have on both accuracy and precision of bulk ²H isotope analysis of nitrogen‐rich organic compounds. Initially an international reference material, IAEA‐CH7, was mixed with silver nitrate in various ratios to assess the impact that N₂ evolved from the pyrolysis of nitrogen‐rich organic compounds would have on measured δ²H‐values of IAEA‐CH7. In a subsequent experiment, benzoic acid was mixed with silver nitrate to mimic the N:H ratio of organic‐rich nitrogen compounds such as cellulose nitrate and RDX. The results of both experiments showed a significant deterioration of both accuracy and precision for the expected δ²H values for IAEA‐CH7 and benzoic acid when model mixtures were converted into hydrogen and nitrogen, and subsequently separated by gas chromatography using standard experimental conditions, namely a 60 cm packed column with molecular sieve 5 Å as stationary phase held at a temperature of 85°C. It was found that bulk ²H stable isotope analysis of nitrogen‐rich organic compounds employing published standard conditions can result in a loss of accuracy and precision yielding δ²H values that are 5 to 25‰ too negative, thus suggesting, for example, that tree‐ring ²H isotope data based on cellulose nitrate may have to be revised. Copyright © 2009 John Wiley & Sons, Ltd.     

Analysis of low‐concentration gas samples with continuous‐flow isotope ratio mass spectrometry: eliminating sources of contamination to achieve high precision

Developments in continuous‐flow isotope ratio mass spectrometry have made possible the rapid analysis of δ¹³C in CO₂ of small‐volume gas samples with precisions of ≤0.1‰. Prior research has validated the integrity of septum‐capped vials for collection and short‐term storage of gas samples. However, there has been little investigation into the sources of contamination during the preparation and analysis of low‐concentration gas samples. In this study we determined (1) sources of contamination on a Gasbench II, (2) developed an analytical procedure to reduce contamination, and (3) identified an efficient, precise method for introducing sample gas into vials. We investigated three vial‐filling procedures: (1) automated flush‐fill (AFF), (2) vacuum back‐fill (VBF), and (3) hand‐fill (HF). Treatments were evaluated based on the time required for preparation, observed contamination, and multi‐vial precision. The worst‐case observed contamination was 4.5% of sample volume. Our empirical estimate showed that this level of contamination results in an error of 1.7‰ for samples with near‐ambient CO₂ concentrations and isotopic values that followed a high‐concentration carbonate reference with an isotope ratio of ?47‰ (IAEA‐CO‐9). This carry‐over contamination on the Gasbench can be reduced by placing a helium‐filled vial between the standard and the succeeding sample or by ignoring the first two of five sample peaks generated by each analysis. High‐precision (SD ≤0.1‰) results with no detectable room‐air contamination were observed for AFF and VBF treatments. In contrast, the precision of HF treatments was lower (SD ≥0.2‰). VBF was optimal for the preparation of gas samples, as it yielded faster throughput at similar precision to AFF. Copyright © 2009 John Wiley & Sons, Ltd.     

Offline oxygen isotope analysis of organic compounds with high N:O

Although the advantages of online δ¹⁸O analysis of organic compounds make its broad application desirable, researchers have encountered NO⁺ isobaric interference with CO⁺ at m/z 30 (e.g. ¹⁴N¹⁶O⁺, ¹²C¹⁸O⁺) when analyzing nitrogenous substrates. If the δ¹⁸O value of inter‐laboratory standards for substrates with high N:O value could be confirmed offline, these materials could be analyzed periodically and used to evaluate δ¹⁸O data produced online for nitrogenous unknowns. To this end, we present an offline method based on modifications of the methods of Schimmelmann and Deniro (Anal. Chem. 1985; 57: 2644) and Sauer and Sternberg (Anal. Chem. 1994; 66: 2409), whereby all the N₂ from the gas products of a chlorinated pyrolysis was eliminated, resulting in purified CO₂ for analysis via a dual‐inlet isotope ratio mass spectrometry system. We evaluated our method by comparing observed δ¹⁸O values with previously published or inter‐laboratory calibrated δ¹⁸O values for five nitrogen‐free working reference materials; finding isotopic agreement to within ±0.2‰ for SIGMA® cellulose, IAEA‐CH3 cellulose (C₆H₁₀O₅) and IAEA‐CH6 sucrose (C₁₂H₂₂O₁₁), and within ±1.8‰ for IAEA‐601 and IAEA‐602 benzoic acids (C₇H₆O₂). We also compared the δ¹⁸O values of IAEA‐CH3 cellulose and IAEA‐CH6 sucrose that was nitrogen‐'doped' with adenine (C₅H₅N₅), imidazole (C₃H₄N₂) and 2‐aminopyrimidine (C₄H₅N₃) with the undoped δ¹⁸O values for the same substrates; yielding isotopic agreement to within ±0.7‰. Finally, we provide an independent analysis of the δ¹⁸O value of IAEA‐600 caffeine (C₈H₁₀N₄O₂), previously characterized using online systems exclusively, and discuss the reasons for an average 1.4‰ enrichment in δ¹⁸O observed offline relative to the consensus online δ¹⁸O value. Copyright © 2010 John Wiley & Sons, Ltd.     

Simultaneous determination of δ15N and δ18O of N2O and δ13C of CH4 in nanomolar quantities from a single water sample

We have developed a rapid, sensitive, and automated analytical system to simultaneously determine the concentrations and stable isotopic compositions (δ¹⁵N, δ¹⁸O, and δ¹³C) of nanomolar quantities of nitrous oxide (N₂O) and methane (CH₄) in water, by combining continuous‐flow isotope‐ratio mass spectrometry and a helium‐sparging system to extract and purify the dissolved gases. Our system, which is composed of cold traps and a capillary gas chromatograph that use ultra‐pure helium as the carrier gas, achieves complete extraction of N₂O and CH₄ in a water sample and separation among N₂O, CH₄, and the other component gases. The flow path following exit from the gas chromatograph was periodically changed to pass the gases through the combustion furnace to convert CH₄ and the other hydrocarbons into CO₂, or to bypass the combustion furnace for the direct introduction of eluted N₂O into the mass spectrometer, for determining the stable isotopic compositions through monitoring the ions of m/z 44, 45, and 46 of CO and N₂O⁺. The analytical system can be operated automatically with sequential software programmed on a personal computer. Analytical precisions better than 0.2‰ and 0.3‰ and better than 1.4‰ and 2.6‰ were obtained for the δ¹⁵N and δ¹⁸O of N₂O, respectively, when more than 6.7 nmol and 0.2 nmol of N₂O, respectively, were injected. Simultaneously, analytical precisions better than 0.07‰ and 2.1‰ were obtained for the δ¹³C of CH₄ when more than 5.5 nmol and 0.02 nmol of CH₄, respectively, were injected. In this manner, we can simultaneously determine stable isotopic compositions of a 120 mL water sample with concentrations as low as 1.7 nmol/kg for N₂O and 0.2 nmol/kg for CH₄. Copyright © 2010 John Wiley & Sons, Ltd.     

On the calibration of continuous,high‐precision δ18O and δ2H measurements using an off‐axis integrated cavity output spectrometer

The ¹⁸O and ²H of water vapor serve as powerful tracers of hydrological processes. The typical method for determining water vapor δ¹⁸O and δ²H involves cryogenic trapping and isotope ratio mass spectrometry. Even with recent technical advances, these methods cannot resolve vapor composition at high temporal resolutions. In recent years, a few groups have developed continuous laser absorption spectroscopy (LAS) approaches for measuring δ¹⁸O and δ²H which achieve accuracy levels similar to those of lab‐based mass spectrometry methods. Unfortunately, most LAS systems need cryogenic cooling and constant calibration to a reference gas, and have substantial power requirements, making them unsuitable for long‐term field deployment at remote field sites. A new method called Off‐Axis Integrated Cavity Output Spectroscopy (OA‐ICOS) has been developed which requires extremely low‐energy consumption and neither reference gas nor cryogenic cooling. In this report, we develop a relatively simple pumping system coupled to a dew point generator to calibrate an ICOS‐based instrument (Los Gatos Research Water Vapor Isotope Analyzer (WVIA) DLT‐100) under various pressures using liquid water with known isotopic signatures. Results show that the WVIA can be successfully calibrated using this customized system for different pressure settings, which ensure that this instrument can be combined with other gas‐sampling systems. The precisions of this instrument and the associated calibration method can reach ～0.08‰ for δ¹⁸O and ～0.4‰ for δ²H. Compared with conventional mass spectrometry and other LAS‐based methods, the OA‐ICOS technique provides a promising alternative tool for continuous water vapor isotopic measurements in field deployments. Copyright © 2009 John Wiley & Sons, Ltd.     

Measurement of sulfur isotope composition (δ34S) by multiple‐collector thermal ionization mass spectrometry using a 33S‐36S double spike

A new analytical technique is described for the determination of δ³⁴S that is comparable to or better than modern gas source mass spectrometry in precision and accuracy, but requires about a factor of 10 less sample. The technique is based on the production of singularly charged arsenic sulfide molecular ions (AsS⁺) by thermal ionization using silica gel as an emitter and combines multiple‐collector thermal ionization mass spectrometry (MC‐TIMS) with a ³³S‐³⁶S double spike to correct instrumental fractionation. Three international sulfur standards (IAEA‐S‐1, IAEA‐S‐2, and IAEA‐S‐3) were measured to evaluate the precision and accuracy of the new technique and to evaluate the consensus values for these standards. Two different double spike preparations were used. The δ³⁴S values (reported relative to Vienna Canyon Diablo Troilite (VCDT), (δ³⁴S (‰) = ([((³⁴S/³²S)_sample/(³⁴S/³²S)_VCDT ? 1) × 1000]), ³⁴S/³²S_VCDT = 0.0441626) determined were ?0.32 ± 0.04‰ (1σ, n = 4) and ?0.31 ± 0.13‰ (1σ, n = 8) for IAEA‐S‐1, 22.65 ± 0.04‰ (1σ, n = 7) and 22.60 ± 0.06‰ (1σ, n = 5) for IAEA‐S‐2, and ?32.47 ± 0.07‰ (1σ, n = 8) for IAEA‐S‐3. The amount of natural sample used for these analyses ranged from 0.40 to 2.35 µmol. Replicate determinations of each standard showed less than 0.5‰ variability (IAEA‐S‐1 <0.4‰, IAEA‐S‐2 <0.2‰, and IAEA‐S‐3 <0.2‰). Because the technique is based on thermal ionization of AsS⁺, and As is mononuclidic, corrections for interferences or for scale contraction/expansion are not required. The availability of MC‐TIMS instruments in laboratories around the world makes this technique immediately available to a much larger scientific community who require highly accurate and precise measurements of sulfur. Published in 2005 by John Wiley & Sons, Ltd.     

Effect of variation in argon content of calibration gases on determination of atmospheric carbon dioxide

Carbon dioxide (CO₂) is a greenhouse gas that makes by far the largest contribution to the global warming of the Earth's atmosphere. For the measurements of atmospheric CO₂ a non-dispersive infrared analyzer (NDIR) and gas chromatography are conventionally being used. We explored whether and to what degree argon content can influence the determination of atmospheric CO₂ using the comparison of CO₂ concentrations between the sample gas mixtures with varying Ar amounts at 0 and 18.6 mmol mol⁻¹ and the calibration gas mixtures with Ar at 8.4, 9.1, and 9.3 mmol mol⁻¹. We newly discovered that variation of Ar content in calibration gas mixtures could undermine accuracy for precise and accurate determination of atmospheric CO₂ in background air. The differences in CO₂ concentration due to the variation of Ar content in the calibration gas mixtures were negligible (<±0.03 μmol mol⁻¹) for NDIR systems whereas they noticeably increased (<±1.09 μmol mol⁻¹) especially for the modified GC systems to enhance instrumental sensitivity. We found that the thermal mass flow controller is the main source of the differences although such differences appeared only in the presence of a flow restrictor in GC systems. For reliable monitoring of real atmospheric CO₂ samples, one should use calibration gas mixtures that contain Ar content close to the level (9.332 mmol mol⁻¹) in the ambient air as possible. Practical guidelines were highlighted relating to selection of appropriate analytical approaches for the accurate and precise measurements of atmospheric CO₂. In addition, theoretical implications from the findings were addressed.     

An injection method for measuring the carbon isotope content of soil carbon dioxide and soil respiration with a tunable diode laser absorption spectrometer

We present a novel technique in which the carbon isotope ratio (δ¹³C) of soil CO₂ is measured from small gas samples (<5 mL) injected into a stream of CO₂‐free air flowing into a tunable diode laser absorption spectrometer (TDL). This new method extends the dynamic range of the TDL to measure CO₂ mole fractions ranging from ambient to pure CO₂, reduces the volume of sample required to a few mL, and does not require field deployment of the instrument. The measurement precision of samples stored for up to 60 days was 0.23‰. The new TDL method was applied with a simple gas well sampling technique to obtain and measure gas samples from shallow soil depth increments for CO₂ mole fraction and δ¹³C analysis, and subsequent determination of the δ¹³C of soil‐respired CO₂. The method was tested using an artificial soil system containing a controlled CO₂ source and compared with an independent method using the TDL and an open soil chamber. The profile and chamber estimates of δ¹³C of an artificially produced CO₂ flux were consistent and converged to the δ¹³C of the CO₂ source at steady state, indicating the accuracy of both methods under controlled conditions. The new TDL method, in which a small pulse of sample is measured on a carrier gas stream, is analogous for the TDL technique to the development of continuous‐flow configurations for isotope ratio mass spectrometry. While the applications presented here are focused on soil CO₂, this new TDL method could be applied in a number of situations requiring measurement of δ¹³C of CO₂ in small gas samples with ambient to high CO₂ mole fractions. Copyright © 2010 John Wiley & Sons, Ltd.     

Revised δ34S reference values for IAEA sulfur isotope reference materials S‐2 and S‐3

Revised δ³⁴S reference values with associated expanded uncertainties (95% confidence interval (C.I.)) are presented for the sulfur isotope reference materials IAEA‐S‐2 (22.62 ± 0.16‰) and IAEA‐S‐3 (−32.49 ± 0.16‰). These revised values are determined using two relative‐difference measurement techniques, gas source isotope ratio mass spectrometry (GIRMS) and double‐spike multi‐collector thermal ionization mass spectrometry (MC‐TIMS). Gas analyses have traditionally been considered the most robust for relative isotopic difference measurements of sulfur. The double‐spike MC‐TIMS technique provides an independent method for value‐assignment validation and produces revised values that are both unbiased and more precise than previous value assignments. Unbiased δ³⁴S values are required to anchor the positive and negative end members of the sulfur delta (δ) scale because they are the basis for reporting both δ³⁴S values and the derived mass‐independent Δ³³S and Δ³⁶S values. Published in 2009 by John Wiley & Sons, Ltd.     

Determination of the stable carbon isotopic compositions of 2‐methyltetrols in ambient aerosols from the Changbai Mountains

Isoprene is one of the most important non‐methane hydrocarbons (NMHCs) in the troposphere: it is a significant precursor of O₃ and it affects the oxidative state of the atmosphere. The diastereoisomeric 2‐methyltetrols, 2‐methylthreitol and 2‐methylerythritol, are marker compounds of the photooxidation products of atmospheric isoprene. In order to obtain valuable information on the δ¹³C value of isoprene in the atmosphere, the stable carbon isotopic compositions of the 2‐methyltetrols in ambient aerosols were investigated. The 2‐methyltetrols were extracted from filter samples and derivatized with methylboronic acid, and the δ¹³C values of the methylboronate derivatives were determined by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). The δ¹³C values of the 2‐methyltetrols were then calculated through a simple mass balance equation between the 2‐methyltetrols, methylboronic acid and the methylboronates. The δ¹³C values of the 2‐methyltetrols in aerosol samples collected at the Changbai Mountain Nature Reserves in eastern China were found to be ?24.66 ± 0.90‰ and ?24.53 ± 1.08‰ for 2‐methylerythritol and 2‐methylthreitol, respectively. Based on the measured isotopic composition of the 2‐methyltetrols, the average δ¹³C value of atmospheric isoprene is inferred to be close to or slightly heavier than ?24.66‰ at the collection site during the sampling period. Copyright © 2010 John Wiley & Sons, Ltd.