End functionalization of hyperbranched poly(siloxysilane): Novel crosslinking agents and hyperbranched–linear star block copolymers

Functionalized hyperbranched poly(siloxysilane)s have been prepared by hydrosilylation reactions involving the multiple silicon hydride (SiH) groups of the polymer to introduce other reactive groups such as epoxy, amine, and hydroxyl groups. The possible use of these modified polymers as novel crosslinking agents is discussed. The same hydrosilylation reaction is used to attach preformed linear poly(isobutylene) (PIB) or poly(ethylene oxide) (PEO) onto the hyperbranched polymer to afford unusual hyperbranched–linear star block copolymers. The PIB‐derived copolymer is shown to be very hydrophobic, whereas its PEO‐derived counterpart is amphiphilic. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2970–2978, 2000     

A SAXS study of the internal structure of dendritic polymer systems

Small-angle x-ray scattering was used to characterize the single-particle scattering factors produced by poly(amidoamine) dendrimers, poly(propleneimine) dendrimers, and polyol hyperbranched polymers in dilute solutions with methanol as solvent. Fits from electron density modeling reveal similar overall densities of the dendrimers as a function of dendrimer generation. The seventh through tenth generation poly(amidoamine) dendrimers exhibit higher order scattering features that require nearly monodisperse, spherical particles with essentially uniform internal segment densities. Dilute hyperbranched polymer solutions exhibit scattering more indicative of the inherent irregularity of internal segment densities and overall sizes to be expected within these systems. Radii of gyration estimated from electron density modeling agree reasonably well with those estimated by standard Guinier methods used in previous studies. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2913–2924, 1997     

Fluorescent dendritic polymers and nanostructured coatings for the detection of chemical warfare agents and other analytes

Polyamidoamine (PAMAM) dendrimers of generations zero (G0) to four (G4), and a hyperbranched polyurea (HB‐PU), were functionalized with 1,5‐dansyl (1,5‐D), 2,5‐dansyl (2,5‐D), 2,6‐dansyl (2,6‐D) and nitrobenzofurazan (NBD) fluorophores that change their fluorescence emission wavelength in response to chemical environment, and the resulting dendritic polymers were characterized by MALDI‐TOF mass spectrometry, ¹H NMR, ¹³C NMR, and fluorescence spectroscopy. Fluorophore‐functionalized dendritic polymers were then reacted further with 3‐acryloxypropyldimethoxymethylsilane (AOP‐DMOMS) at various fluorophore to DMOMS substitution ratios. The resulting materials were cast onto glass slides, and cured into robust nanostructured coatings. Coatings with 50% fluorophore–50% DMOMS substitution showed the strongest fluorescence and the best physical properties. Coated coupons were tested against a wide range of analytes including the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and chloroethylethylsulfide (CEES), and the water‐methanol‐ethanol series. It was found that the ability of the coatings to distinguish between analytes decreased with increasing cross‐link density for both dendrimer and hyperbranched polymer‐based coatings. It was also found that the percent fluorophore substitution and the type of dendritic polymer carrying the fluorophore had no significant effect upon fluorescence emission wavelength, but fluorescence emission wavelength became less dependent upon solvent with increasing dendrimer generation and molecular mass. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5101–5115, 2009     

Structural and end‐group effects on bulk and surface properties of hyperbranched poly(urea urethane)s

The hydroxy end groups of aromatic and aliphatic hyperbranched poly‐(urea urethane)s prepared with an AA* + B*B₂ one‐pot method were modified with phenylisocyanate, butylisocyanate, and stearylisocyanate. The success of the modification reaction was verified with ¹H NMR and IR spectroscopy. Linear model poly‐(urea urethane)s were prepared, too, for comparison. The bulk properties of OH functionalized hyperbranched poly(urea urethane)s, compared with those of linear analogues and modified hyperbranched poly(urea urethane)s, were studied with differential scanning calorimetry, thermogravimetric analysis, and temperature‐dependent Fourier transform infrared measurements. Transparent and smooth thin films could be prepared from all polymer samples and were examined with a light microscope, a microglider, and an atomic force microscope. The properties of the polymer surface were examined by measurements of the contact angle and zeta potential. For all samples, the properties were mainly governed by the strong interactions of the urea and urethane units within the backbone, whereas the influence of the nature of the end groups and of the branched structure was reduced in comparison with other hyperbranched polymer systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3376–3393, 2005     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

Linear‐dendritic block copolymer hosts for the encapsulation of electro‐optic chromophores via H‐Bonding

Linear‐dendritic block copolymer hosts were synthesized by end‐functionalizing poly(methylmethacrylate) with dendrons that acted as hydrogen‐bonding acceptors for nonlinear optical chromophores. Second harmonic generation experiments indicate that the d₃₃ coefficients and maximum chromophore loading are increased in linear‐dendritic block copolymer hosts over comparable homopolymer hosts. Transmission electron microscopy shows 5–10 nm chromophore domains, confirming the effective spatial dispersion of the chromophores. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5017–5026, 2009     

A general strategy for highly efficient nanoparticle dispersing agents based on hybrid dendritic linear block copolymers

A modular approach to the synthesis of a library of hybrid dendritic‐linear copolymers was developed based on RAFT polymerization from monodisperse dendritic macroRAFT agents. By accurately controlling the molecular weight of the linear block, generation number of the dendrimer and the nature of the dendritic chains ends, the performance of these hybrid block copolymers as dispersing agents was optimized for a range of nanoparticles. For titanium dioxide nanoparticles, dispersion in a poly(methyl methacrylate) matrix was maximized with a second generation dendrimer containing four carboxylic acid end groups, and the quality of dispersion was observed to be superior to commercial dispersing agents for TiO₂. This approach also allowed novel hybrid dendritic‐linear dispersing agents to be prepared for the dispersion of Au and CdSe nanoparticles based on disulphide and phosphine oxide end groups, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1237–1258, 2009     

Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Synthesis of multiblock hyperbranched‐linear poly(ether sulfone) copolymers

Hyperbranched poly(ether sulfone) was prepared in the presence of an oligomeric linear poly(ether sulfone) to generate multiblock hyperbranched‐linear (LxHB) copolymers. The LxHB copolymers were prepared in a two‐step, one‐pot synthesis by first polymerizing AB monomer to generate a linear block of a desired molecular weight followed by addition of the AB₂ monomer in a large excess (19:1, AB₂:AB) to generate the hyperbranched block. NMR integration analysis indicates that AB₂:AB ratio is independent of the reaction time. Because the molecular weight still increases with reaction time, these results suggest that polymer growth continues after consumption of monomer by condensation into a multiblock architecture. The LxHB poly(ether sulfone)s have better thermal stability (10% mass loss > 343 vs. 317 °C) and lower T_g (200 vs. > 250 °C) than the hyperbranched homopolymer, higher T_g than the linear homopolymer (<154 °C), while little difference in the solubility character was observed between the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4785–4793, 2008     

Synthesis of imidazole‐terminated hyperbranched polymers with POSS‐branching points and their pH responsive and coordination properties

An imidazole‐terminated hyperbranched polymer with octafunctional POSS branching units denoted as POSS‐HYPAM‐Im was prepared by the polymerization of excess amounts of tris(2‐aminoethyl)amine with the first‐generation methyl ester‐terminated POSS‐core poly(amidoamine)‐typed dendrimer, reacting with methyl acrylate, and ester‐amide exchange reaction with 3‐aminopropylimidazole. The imidazole‐terminated hyperbranched poly(amidoamine) denoted as HYPAM‐Im was also synthesized with 1‐(3‐aminopropyl)imidazole from a methyl ester‐terminated hyperbranched poly(amidoamine) by the ester‐amide exchange reaction. The transmittance of the POSS‐HYPAM‐Im solution drastically decreased when the solution pH was greater than 8.2. On the other hand, the transmittance of the HYPAM‐Im solution gradually decreased when the solution pH at 8.5 and was greater than 9. Spectrophotometric titrations of the hyperbranched polymer aqueous solutions with Cu²⁺ ions indicated the variation of the coordination modes of POSS‐HYPAM‐Im from the Cu²⁺–N₄ complex to the Cu²⁺–N₂O₂ complex and the existence of the only one complexation mode of Cu²⁺–N₄ between Cu²⁺ ion and HYPAM‐Im with increasing the concentrations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2695–2701     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Synthesis,characterization, and heterogeneous catalysis of polymer‐supported poly(propyleneimine) dendrimer stabilized gold nanoparticle catalyst

We report here, the synthesis of two types of heterogeneous nanoparticle catalysts viz., polymer‐supported poly(propyleneimine)‐G2 dendrimer stabilized gold nanoparticle catalysts using crosslinked poly(4‐vinylpyridine) matrix (PSP4VP) as support material. The grafting of dendrimer on the surface of P4VP beads was characterized by FTIR spectrophotometer and CHN analyses. The immobilization of AuNPs was characterized by UV‐Vis spectrum, SEM, and HRTEM studies. The resultant polymer‐supported dendrimer stabilized AuNPs were used as a heterogeneous catalyst for the reduction of 4‐nitrophenol. The catalytic activity is found to be excellent and it can also be reused many times by simple filtration and activity remains maintained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2525–2532, 2010     

Unusual contributions of molecular architecture to rheology and flow birefringence in hyperbranched polystyrene melts

With the increase in sophisticated synthesis methods, it appears that polymer architecture may be a tunable property. Therefore, the role of architecture in rheological and processing properties has received renewed attention, mainly because of dendrimer synthesis and metallocene‐catalyst technology. Linear polymers and hyperbranched polymers represent two ends of branching complexity. Some previous studies have suggested that hyperbranched polymers may behave like unentangled polymers, whereas others have proposed that they exhibit the properties of soft colloids. In an effort to compare the responses of linear and hyperbranched polymers, we synthesized starlike hyperbranched polystyrenes (HBPSs) of various branch lengths and numbers of branches. The HBPSs used in this study were unentangled or weakly entangled, allowing us to study the effect of branch density more readily. Two linear polystyrene (L‐PS) melts and two HBPSs were studied. Using a custom‐built rheooptical apparatus, we characterized the rheology and flow birefringence of these materials. To our knowledge, these are the first flow birefringence measurements on highly branched polymer melts. Our results suggest that the flow behavior of HBPS is significantly different from that of L‐PS: (1) HBPS shows nonterminal behavior in the low‐frequency rheological response; (2) when the stress‐optical rule (SOR) holds, the stress‐optical coefficient of HBPS is much lower than those of analogous linear polymers; and (3) when the branch density is high and the branch length is sufficiently low, the SOR fails for these homopolymer melts. A significant increase in the birefringence for a given amount of stress in the low‐frequency region suggests that there may be a soft core in these materials due to the strong preferential radial orientation of chain segments near the center of a molecule versus those near the periphery. The predominantly elastic response of the soft structures may be responsible for the enhanced form birefringence. Our preliminary results indicate that these materials may exhibit both polymeric and soft‐colloid natures. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2562–2571, 2001     

Synthesis of backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s through proton‐transfer polymerization

Stimuli‐responsive hyperbranched polymers have attracted great attention in recent years because of their wide applications in biomedicine. Through proton‐transfer polymerization of triethanolamine and 1,2,7,8‐diepoxyoctane with the help of potassium hydride, a series of novel backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s were prepared successfully in one‐pot. The degrees of branching of the resulting polymers were at 0.40–0.49. Turbidity measurements revealed that hyperbranched poly(amine‐ether)s exhibited thermo and pH dual‐responsive properties in water. Importantly, these responsivities could be readily adjusted by changing the polymer composition as well as the polymer concentration in aqueous solution. Moreover, in vitro evaluation demonstrated that hyperbranched poly(amine‐ether)s showed low cytotoxicity and efficient cell internalization against NIH 3T3 cell lines. These results suggest that these backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s are promising materials for biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Amphiphilic and hydrophobic surface patterns generated from hyperbranched fluoropolymer/linear polymer networks: Minimally adhesive coatings via the crosslinking of hyperbranched fluoropolymers

Hyperbranched fluoropolymers (HBFPs), based on benzyl ether linkages and having a large number of pentafluorophenyl chain ends, were crosslinked by a reaction with diamino-terminated poly(ethylene glycol) (PEG) or diamino-terminated poly(dimethyl siloxane) (PDMS) to form hyperbranched–linear copolymer networks of different compositions, structures, and properties. The crosslinking reactions involved the nucleophilic aromatic substitution of the pentafluorophenyl para-fluorines of HBFP by the amine functionalities of the respective telechelic linear segments. The contact angles, differential scanning calorimetry, thermogravimetric analysis, tensile measurements, and atomic force microscopy (AFM) were used to characterize the resulting network film samples. The surface wettability of the crosslinked materials was affected by the nature and amount of the linear polymer crosslinking agent employed. Amphiphilic polymer networks were formed by the incorporation of diamino-terminated PEG as a crosslinker, whereas diamino-terminated PDMS produced polymer networks of a hydrophobic character. The mechanical properties improved upon crosslinking, as measured by tensile testing. The mechanical integrity of the films was also found to improve upon crosslinking, as measured by AFM machining protocols. The AFM images revealed topographical morphologies that appeared to be the result of phase segregation of HBFP from PEG or PDMS; the dimensions of the phase-segregated domains were dependent on the stoichiometry of HBFP to the linear polymer and the thickness of the coating. As the content of PEG increased, fouling by human fibrinogen, used as a model protein, decreased. Further studies are in progress to determine the effects of the surface composition, morphology, and topography on the biofouling characteristics. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3531–3540, 2003     

Synthesis and characterization of polyurethane anionomers with bisazoaromatic chromophores and carboxylate groups

A new diol with a bisazoaromatic pendant was prepared to obtain photosensible polymers suitable for dyed aqueous systems. A polyurethane bearing bisazoaromatic chromophores, based on a poly(tetramethylene oxide) diol (average molecular weight = 2000), 2,4‐tolylene diisocyanate, and the aforementioned azo diol, was synthesized and characterized. Bichromophoric polyurethane anionomers, prepared by a two‐step substitution of urethane hydrogen atoms with sodium carboxylate groups, were studied. The influence of the concentration of carboxylate groups (30–158 mequiv of ionic groups/100 g of polymer) on some polymer properties and photoisomerism in polymer solutions and thin films was examined. In particular, the polymer structure and its morphology dictated the proximity of anchored bisazo chromophores and the capability of intermolecular forces between dyes producing hydrogen aggregates in solutions and thin films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5463–5470, 2004     

Immobilization of flame retardant onto silica nanoparticle surface and properties of epoxy resin filled with the flame retardant‐immobilized silica

To prepare silica nanoparticle having flame retardant activity, the immobilization of flame retardant onto hyperbranched poly(amidoamine) (PAMAM)‐grafted silica was investigated. Grafting of PAMAM onto a silica surface was achieved in a solvent‐free dry‐system using PAMAM dendrimer synthesis methodology. The immobilization of bromine flame retardant, poly(2,2′,6,6′‐tetrabromobisphenol‐A) diglycidyl ether (PTBBA), was successfully achieved by the reaction of terminal amino groups of PAMAM‐grafted silica (Silica‐PAMAM) with epoxy groups of PTBBA. The immobilization of PTBBA was confirmed by FTIR and thermal decomposition GC‐MS. The amount of PTBBA immobilized onto Silica‐PAMAM was determined to be 60 wt %. PTBBA‐immobilized Silica‐PAMAM (Silica‐PAMAM‐PTBBA) was dispersed uniformly in a epoxy resin, and the epoxy resin was cured in the presence of hexamethylenediamine. Flame retardant activity of the epoxy resin filled with Silica‐PAMAM‐PTBBA was estimated by limiting oxygen index (LOI). The LOI of epoxy resin filled with Silica‐PAMAM‐PTBBA was higher than that filled with untreated silica and free PTBBA. It was confirmed that the flame retardant activity of epoxy resin was improved by the addition of the Silica‐PAMAM‐PTBBA. The elimination of PTBBA from the epoxy resin filled with Silica‐PAMAM‐PTBBA into boiling water was hardly observed by immobilization of PTBBA onto silica surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6145–6152, 2009     

Synthesis of a new hyperbranched‐linear‐hyperbranched triblock copolymer and its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins

A new hyperbranched‐linear‐hyperbranched polymer was prepared in a one pot process by reaction of 4,4‐bis(4‐hydroxyphenyl)valeric acid and poly(ethylene glycol) (HPH). After characterization by ¹H and ¹³C NMR, SEC, DSC, and TGA, this polymer was used, in proportions of 5, 10, and 15 phr, as a chemical modifier in the UV and thermal cationic curing of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexyl carboxylate epoxy resin. The curing process was studied by calorimetry, demonstrating the accelerating effect of the hydroxyl groups present in HPH's structure. The morphology of the resulting thermosets depended on the curing system used, as demonstrated by FE‐SEM microscopy, but in both cases phase separation occurred. Thermosets obtained by thermal curing presented lower thermal stability than UV‐cured materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012