Magnetostructural examination of Mn(III) complexes [Mn(cyclam)X2]+ with strong axial ligands

Three novel Mn(III) cyclam complexes, [Mn(cyclam)(NCBH₃)₂](CF₃SO₃), [Mn(cyclam)(NCBPh₃)₂](CF₃SO₃), and [Mn(cyclam)(NCSe)₂](CF₃SO₃) · H₂O, have been synthesized. These complexes are in the high-spin state between 4 and 350 K, and show large zero-field splittings. The crystal structure of [Mn(cyclam)(NCBH₃)₂](CF₃SO₃) was determined where the axial elongation of Mn–N bonds is found to be the largest among the homologue complexes. Ligand field in the [Mn(cyclam)X₂]⁺ complex series was examined by angular-overlap model calculation.     

Thermal investigation and infrared evolved gas analysis of light lanthanide(III) complexes with pyridine-3,5-dicarboxylic acid

The characterisation of light lanthanide(III) complexes with pyridine-3,5-dicarboxylic acid of the formula Ln₂pdc₃·nH₂O where Ln denotes lanthanides from La to Gd, pdc = C₇H₅NO₄²⁻; n = 6 for Ce(III), n = 7 for Pr(III) and Sm(III), n = 8 for La and n = 13 for Nd(III), Eu(III) and Gd(III) was performed by the thermal analysis TG-DTA and the simultaneous infrared evolved gas analysis TG-FTIR. Heating of the crystalline complexes resulted in the dehydration process at first. Next, dehydrated compounds decompose releasing of CO₂, CO, CH₄ and hydrocarbons. Free pyridine molecules were detected only in the gaseous products of lanthanum(III) complex decomposition.     

New lanthanide(III) disiloxanediolates: Syntheses and structures

Three new chloro-functionalized lanthanide(III) bis(disiloxanediolate) complexes, [{(Ph₂SiO)₂O}₂{Li(DME)}₂]Nd(DME)Cl (3), [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]HoCl·2THF (4), and [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]ErCl·2THF (5) have been prepared by the treatment of anhydrous lanthanide trichlorides, LnCl₃ (Ln = Nd, Ho, Er), with two equivalents of in situ prepared (Ph₂SiOLi)₂O (2). In a similar manner, the treatment of PrCl₃ with 2 equivalents of (Ph₂SiOLi)₂O (2) in the presence of LiN(SiMe₃)₂ afforded the silylamide-functionalized derivative [{(Ph₂SiO)₂O}₂{Li(THF)₂}₂]Pr[N(SiMe₃)₂] (6). All new compounds have been structurally characterized by X-ray diffraction analyses. Compounds 4 and 5 represent a new intermediate structural type of lanthanide bis(disiloxanediolates) between the “inorganic metallocenes” (Pr, Nd, Sm) and the “metallacrowns” (Sc, Y).     

Structure and magnetic properties of 3d–4f heterometallic complexes containing di-2-pyridyl ketoximate: An approach to single-molecule magnets

[{Ln(hfac)₃}₂{Ni(dpk)₂(phen)}] (1Ln) and [{Ln(hfac)₃}₂{Ni(dpk)₂(py)₂}] (2Ln) were synthesized and characterized, where dpk = di-2-pyridyl ketoxmate and Ln = La, Tb, Dy, Ho, Er. The N–O groups from dpk bridged the central nickel(II) ion and terminal lanthanide(III) ions, giving a linear trinuclear array. Dc magnetic susceptibility measurements revealed that they did not possess appreciable intramolecular ferromagnetic or ferrimagnetic interaction. Ac magnetic susceptibility measurements clarified that frequency dependence of out-of-phase ac susceptibility was observed only for Dy derivatives 1Dy and 2Dy, which is regarded as an indication of single-molecule magnets.     

Comparative study of two layered lanthanide dicarboxylates based on europium(III) dimers

The new rare-earth dicarboxylate solid Eu₂(H₂O)₄{C₆H₁₀–(CO₂)₂}₃·2H₂O or MIL-94 has been isolated under hydrothermal conditions. Its layered structure, which was solved using X-ray powder diffraction data, is built up from dimers of nine-coordinated edge-sharing polyhedra linked through 1,3-cyclohexane dicarboxylate (1,3-CHC) moieties. A comparative study of MIL-94 and the layered lanthanide dicarboxylate EuBDC or Eu₂(H₂O)₂{C₆H₄–(CO₂)₂}₃, which is built up from dimers of corner-sharing polyhedra and 1,3-benzenedicarboxylate (1,3-BDC) linkers, is also reported. Crystal data for MIL-94: orthorhombic space group Pnma (no. 62) with a = 8.8470(1) Å, b = 25.0148(1) Å, c = 14.3716(4) Å and Z = 4. MIL stands for Material Institut Lavoisier.     

3D pillar-layered coordination polymers based on 4d–4f heterometallic assembly

By control of mixed ligands with particular coordination sites, heterometallic coordination polymers, [Ln₂(H₂O)₂Ag(C₂O₄)₂(ina)₃]_n (Ln = Eu (1), Dy (2), Hina = isonicotinic acid) and {[LnAg(C₂O₄)(na)₂]·2H₂O}_n (Ln = La (3), Tb (4), Hna = nicotinic acid), have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR, thermogravimetric analysis (TGA), and single-crystal X-ray diffraction. These coordination polymers feature 3D pillar-layered coordination frameworks constructed from two-dimensional (2D) lanthanide–carboxylate layers and Ag(ina) or Ag(na) pillars. It is interesting that the in situ decarboxylation of pyridine-2,3-dicarboxylic acid into nicotinic acid was observed. The luminescent properties of 1 and 4 were also studied.     

Coordination enhancement of single-molecule magnet behavior of Tb(III)–Cu(II) dinuclear systems

Tb(III)–Cu(II) based single-molecule magnets (SMMs) were synthesized to investigate the relationship between magnetic anisotropy and the symmetry of the ligand field, by the reaction of [TbCu(o-vanilate)₂(NO₃)₃] with 2,2-dimethyl-1,3-propanediamine (3), followed by the reaction of one another equivalent of o-vaniline (4). Both complexes behave as SMM in the temperature range of 2.8–4.0 K (3) and 2.8–5.2 K (4), showing semi-circle shapes of Cole–Cole plots with α parameters in the ranges of 0.27–0.41 and 0.11–0.32. The energy barriers Δ/k_B for the spin flippings were estimated from the Arrhenius plots to be 29(2) K for 3 and 32.2(6) K for 4, respectively.     

Dinuclear triple helical Mn(III), Fe(III) and Co(III) complexes

Synthesis, characterization and physical properties of the dinuclear triple helical complexes [Mn₂(μ-L)₃] (1), [Fe₂(μ-L)₃] (2) and [Co₂(μ-L)₃] (3) with the tetradentate Schiff base (H₂L) derived from 1 mol equiv. of hydrazine and 2 mole equiv. of 2-hydroxy-1-naphthaldehyde are described. Triple helical molecular structures of 2 and 3 have been confirmed by X-ray crystallography. Magnetic susceptibility measurements reveal complex 3 is diamagnetic while a weak antiferromagnetic interaction is operative between the metal centres in both 1 and 2.     

A family of dodecanuclear Mn11Ln single-molecule magnets

A series of four isostructural dodecanuclear complexes [Mn^III₉Mn^II₂Ln^III(O)₈(OH)(piv)₁₆(NO₃)(CH₃CN)]·xCH₃CN·yC₇H₁₆ (piv = pivalate; x = ½, y = ¾, Ln = Tb (1); x = 2, y = ½, Ln = Dy (2), Ho (3), and Y (4)) has been prepared for which the structural motif described as ‘a lanthanide ion nested in a large manganese shell’ is observed. All compounds show out-of-phase signals in their ac susceptibilities, and their single-molecule magnet behaviour was confirmed by single-crystal micro-SQUID studies of 1-3 which show hysteresis loops of molecular origin at T < 1.0 K. The SMM behaviour observed in compounds 1-3 is more pronounced than that for 4, which contains the diamagnetic Y^III ion. This is principally the result of ferromagnetic coupling between the paramagnetic anisotropic Ln^III ions (Tb^III, Dy^III and Ho^III) and the manganese shell, which enhances the total spin ground state of the complexes.     

Mononuclear ruthenium(III) complexes containing chelating thiosemicarbazones: Synthesis,characterization and catalytic property

Mononuclear ruthenium(III) complexes of the type [RuX(EPh₃)₂(L)] (E = P or As; X = Cl or Br; L = dibasic terdentate dehydroacetic acid thiosemicarbazones) have been synthesized from the reaction of thiosemicarbazone ligands with ruthenium(III) precursors, [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] in benzene. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV–vis and EPR spectral data. These complexes are paramagnetic and show intense d–d and charge transfer transitions in dichloromethane. The complexes show rhombic EPR spectra at LNT which are typical of low-spin distorted octahedral ruthenium(III) species. All the complexes are redox active and display an irreversible metal centered redox processes. Complex [RuCl(PPh₃)₂(DHA–PTSC)] (5) was used as catalyst for transfer hydrogenation of ketones in the presence of isopropanol/KOH and was found to be the active species.     

Synthesis,structure and antibacterial activity of manganese(III) complexes of a Schiff base derived from furfurylamine

Two new mononuclear complexes of manganese(III) viz. [MnL₂(LH)₂]ClO₄ (1) and [MnL₂(N₃)]·0.5CH₃OH (2) have been synthesized by reacting manganese perchlorate with furfurylamine and salicylaldehyde (plus sodium azide in 2) where L = (2-hydroxybenzyl-2-furylmethyl)imine, an asymmetric bidentate Schiff base formed in situ to bind the Mn(III) ion. The complexes have been characterized by elemental analysis, IR spectroscopy, TGA and single crystal X-ray diffraction studies. Structural studies reveal that the complexes 1 and 2 adopt an octahedral and a square pyramidal geometry, respectively. The antibacterial activity of the complexes has been tested against Gram(+) and Gram(?) bacteria.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

In search for mixed transition metal/lanthanide single-molecule magnets: Synthetic routes to NiII/TbIII and NiII/DyIII clusters featuring a 2-pyridyl oximate ligand

Employing the mononuclear complex [Ni{(py)C(Me)NO}₂{(py)C(Me)NOH}] (1) as ‘ligand’ [(py)C(Me)NOH = methyl 2-pyridyl ketone oxime], the use of the ‘metal complexes as ligands’ approach has led to the synthesis of the mixed Ni^II/Ln^III complexes [NiTb{(py)C(Me)NO}₂(NO₃)₃{(py)C(Me)NOH}] (2), [Ni₂Ln₂{(py)C(Me)NO}₆(NO₃)₄] (Ln = Dy, 3; Ln = Tb, 4) and [Ni₂Tb{(py)C(Me)NO}₆](NO₃) (5). The structures of 2, 3, and 5, and the magnetic properties of 2 and 5 are briefly discussed.     

Polymerization of phenylacetylene by novel Rh (I)-, Ir (I)- and Ru (IV) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R = mesityl, 2-propyl): Influence of structure on activity and polymer structure

The preparation of novel Rh (I) and Ir (I) complexes, i.e. [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[PF₆]⁻ (1), Rh(CF₃SO₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (2) and Ir(CF₃CO₂)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (3) (COD = 1,5-cyclooctadiene), is described. Compounds 1 and 3 were structurally characterized by X-ray diffraction. In 1, the N-heterocyclic carbene acts as a bidentate ligand with the carbene coordinating to the Rh(I) center and an arene group acting as a homoazallyl ligand. The catalytic activity of complexes 1–3 in the polymerization of phenylacetylene was studied and compared to that of RhCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (4), Rh(CF₃COO)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (5), [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[BF₄]⁻ (6), IrCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (7), IrCl(1,3-diisopropyl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (8), IrBr(1,3-di-2-propylimidazolin-2-ylidene)(COD) (9), RuCl₂(PCy₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH–C₆H₅) (10), RuCl₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (11), Ru(CO₂CF₃)₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (12). Compounds 1–6 were active in the polymerization of phenylacetylene. cis-Poly(phenylacetylene) (PPA) was obtained with the rhodium-based catalysts 1, 2, 4–6, trans-PPA was obtained with the Ir-based catalysts 3 and 8. In addition, compounds 1 and 6 were found to produce highly stereoregular PPA with a cis-content of 100% in the presence of water. Finally, the Ru-based metathesis initiator 12 allowed for the synthesis of trans-PPA, representing the first example of a ruthenium complex being active in the polymerization of a terminal alkyne.     

Synthesis and structural chemistry of oxazolinyl-carbene copper(I) complexes

Reaction of a series of directly connected oxazoline–imidazolium salts with potassium tert-butoxide and in the presence of CuBr · SMe₂ at −78 °C cleanly gave the corresponding 2-oxazolinyl-(N-mesityl)imidazolidenecopper(I) complexes which are monomeric in solution but aggregate in the solid state. X-ray diffraction studies established a dimeric structure for [{2-(4,4-dimethyl)-oxazolinyl-(N-mesityl)imidazolidene}(bromo)copper(I)]₂ (2a) whereas the chiral derivative [{2-(4-S-isopropyl)-oxazolinyl-(N-mesityl)imidazolidene}(bromo)-copper(I)]_∝ (2b) forms infinite chains of a coordination polymer.     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Electrospray ionization mass spectrometry of a cerium(III) phosphomolybdate complex: Condensed and gas-phase cluster chemistry

Electrospray ionization quadrupole ion trap mass spectrometry (ESI-QIT/MS) of the ammonium cerium(III) phosphomolybdate complex (NH₄)₁₁[Ce(III)(PMo₁₁O₃₉)₂] in aqueous media has revealed a concentration-dependent behavior. Under fixed instrumental parameters, the Ce-containing polyoxomolybdate complexes H₂Ce(III)P₂Mo₂₂O₇₅^3? and Ce(III)PMo₁₁O₃₈^2? are the primary species present at 11 mM (pH = 4.3); at 0.7 mM (pH = 3.6), Ce(III)PMo₁₀O₃₅^2? is the predominant species, Ce(III)PMo₁₁O₃₈^2? is quite diminished, and H₂Ce(III)P₂Mo₂₂O₇₅^3? is absent. As a result of the complex isotopic fingerprints from multiple molybdenums, compositions of such ions are difficult to assign—successive collision induced dissociation (CID) of large ions produced smaller ions for which calculated and experimental isotopic patterns could be compared. The oxidation state of Ce and the number of counter cations on negative complexes was discerned from spectra of ions containing ¹H⁺ and ⁷Li⁺. The overall result is an ESI method applicable to phosphomolybdate complexes containing redox sensitive f-block metal ions such as Ce(IV) and Pu(III/IV). Dissociation studies also gave insight into favored fragmentation pathways, and generated gas ions with empirical formulae similar to known condensed-phase ions. Deconvolution of concentration- and pH-dependent solution behavior via ESI/MS and ³¹P NMR spectroscopy showed speciation dependent on solution concentration, not on pH.     

Synthesis and in vitro biology of Co(II), Ni(II), Cu(II) and Zinc(II) complexes of functionalized beta-diketone bearing energy buried potential antibacterial and antiviral O,O pharmacophore sites

The clinically active functionalized β-diketones 1-(2′,4′-dihydroxyphenyl)-3-(2″-substitutedphenyl)-propane-1,3-dione (L₁)–(L₂) have been synthesized from Baker–Venkataraman transformation of 2,4-diaroyloxyacetophenones. Their transition metal complexes (1)–(8) have been prepared and characterized by physical, spectral and analytical data. The functionalized beta-diketone potentially acts as bidentate ligand and co-ordinate with the transition metal atom through beta-diketo system. The complexes have general formula [ML₂] where M = Co(II), Ni(II), Cu(II), Zinc(II) and L = ligand. The 1-(2′,4′-dihydroxyphenyl)-3-(2″-substitutedphenyl)-propane-1,3-dione and their transition metal complexes have been screened for in vitro antibacterial, antifungal and antioxidant bioassay. The biological activity data show that the transition metal complexes are more potent antibacterial, antifungal and antioxidant agents than the parent functionalized beta-diketone against different bacterial and fungal species. This constitutes a new group of compounds that can be used as potential metal derived drugs. Ultimately, here we can prompt about the use of metals for the drugs. The metal complexes were also studied for their thermogravimetric analyses.     

Bis(oxalato)chromium(III) complexes: Versatile tectons in designing heterometallic coordination compounds

The mononuclear oxalato-containing chromium(III) complexes of general formula [Cr(AA)(C₂O₄)₂]^? (AA = α-diimine type ligand) are able to produce a large variety of heterometallic complexes by acting as ligands towards either fully solvated metal ions or preformed cationic complexes with available coordination sites. This review focuses on the structural diversity of the polynuclear complexes (oligonuclear and coordination polymers) which are generated by the bis(oxalato)chromate(III) species, with a special emphasis to their magnetic properties.