Hot Electrons at Solid–Liquid Interfaces: A Large Chemoelectric Effect during the Catalytic Decomposition of Hydrogen Peroxide

The study of energy and charge transfer during chemical reactions on metals is of great importance for understanding the phenomena involved in heterogeneous catalysis. Despite extensive studies, very little is known about the nature of hot electrons generated at solid–liquid interfaces. Herein, we report remarkable results showing the detection of hot electrons as a chemicurrent generated at the solid–liquid interface during decomposition of hydrogen peroxide (H₂O₂) catalyzed on Schottky nanodiodes. The chemicurrent reflects the activity of the catalytic reaction and the state of the catalyst in real time. We show that the chemicurrent yield can reach values up to 10^?1 electrons/O₂ molecule, which is notably higher than that for solid–gas reactions on similar nanodiodes.     

Review: Recent applications of scanning electrochemical microscopy to the study of charge transfer kinetics

Scanning electrochemical microscopy (SECM) has been proven to be a valuable technique for the quantitative investigation and surface analysis of a wide range of processes that occur at interfaces. In particular, there is a great deal of interest in studying the kinetics of charge transfer characteristics at the solid/liquid and liquid/liquid interface. This overview outlines recent advances and applications of SECM to the investigation of charge transfer reactions at the solid/liquid interface and liquid/liquid interface.     

Remarkable support effect of SWNTs in Pt catalyst for methanol electrooxidation

Carbon nanotubes have been proposed as advanced metal catalyst support for electrocatalysis. In this work, different carbon support materials including single-walled carbon nanotubes (SWNTs), multi-walled carbon nanotubes (MWNTs) and XC-72 carbon black, were compared in terms of their electrochemical properties using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The SWNTs is found to exhibit the highest accessible surface area in electrochemical reactions and the lowest charge transfer resistance at the SWNTs/electrolytes. These carbon materials are then loaded with varying amount of Pt by the electrodeposition technique to prepare carbon supported Pt catalysts. Electrochemical measurements of methanol oxidation reveal that the SWNTs supported Pt catalyst exhibits the highest mass activity (mA/mg-Pt). In comparison with Pt-XC-72 and Pt-MWNTs, the remarkably enhanced electrocatalytic activity of the Pt-SWNTs maybe attributed to a higher dispersion and utilization of the Pt particles, which are directly related to the electrochemical characteristics of SWNTs. The high concentration of oxygen-containing functional groups, high accessible surface area, low charge transfer resistance at the carbon/electrolyte interfaces can be important for the Pt dispersing and strong metal-support interaction in the Pt-SWNTs catalyst.     

Molecular mechanism of formation of supported platinum catalysts of the Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> family

Certain stages of the classical procedure for preparing aluminum-platinum catalysts, whose understanding is important from both the basic and practical viewpoints, are considered on the molecular level. Properties of both participants (active component precursor solution and oxide surface) are shown to be inhomogeneous, which can affect interaction of the components at the fixing stage. Existing views (and their evolution) on the mechanism of adsorption of platinum complexes from aqueous solutions on aluminum oxide surface are discussed. The role of chemical processes on the stage of fixing precursor on the electronic and structural properties of the supported metal is demonstrates. Strong metal-support interaction is shown to endow platinum with specific adsorption and catalytic properties in hydrocarbon transformation reactions.     

金属核及氧化铈的物理化学性质对一氧化碳氧化的影响

氧化铈独特的氧化还原性能使其适合用作氧化反应中的催化剂或载体.氧化铈负载的过渡金属纳米粒子或孤立的单原子提供了金属-载体界面,从而降低了去除界面氧原子的能耗,提供了可以参与ManVanKulvian氧化过程的活性氧物种.CO氧化是测试氧化铈负载催化剂还原性的主要探针反应,并且它常见于在相对低温下消除CO的各种应用中.在过量H2中优先氧化CO(PROX)反应可控制CO浓度达到超低水平,以防止氢氧化电催化剂中毒.催化剂在CO氧化反应中的活性和在PROX反应中对CO和H2的选择性取决于金属物种的种类和分散性、CeO2的结构和化学性质以及催化剂的合成方法.在这篇综述中,我们总结了最近发表的关于CeO2负载的金属纳米粒子和单原子催化CO氧化和PROX反应的相关工作;以及不同的负载金属和同种金属在普通CeO2表面上的反应性.我们还总结了密度泛函理论计算中提出的最可能的反应机理;并且讨论了各种负载型金属在PROX反应中影响CO氧化选择性的因素.     

On the Roles of Electron Transfer in Catalysis by Nanoclusters and Nanoparticles

Electron transfer plays a major role in chemical reactions and processes, and this is particularly true of catalysis by nanomaterials. The advent of metal nanoparticle (NP) catalysts, recently including atomically precise nanoclusters (NCs) as parts of nanocatalyst devices has brought increased control of the relationship between NP and NC structures and their catalytic functions. Consequently, the molecular definition of these new nanocatalysts has allowed a better understanding and management of various kinds of electron transfer involved in the catalytic processes. This Minireview brings a chemist‘s view of several major aspects of electron-transfer functions concerning NPs and NCs in catalytic processes. Particular focus concerns the role of NPs and NCs as electron reservoirs and light-induced antenna in catalytic processes from H₂ generation to more complex reactions and sustainable energy production.     

Furfuraldehyde hydrogenation on titanium oxide-supported platinum nanoparticles studied by sum frequency generation vibrational spectroscopy: Acid-base catalysis explains the molecular origin of strong metal-support interactions

This work describes a molecular-level investigation of strong metal-support interactions (SMSI) in Pt/TiO(2) catalysts using sum frequency generation (SFG) vibrational spectroscopy. This is the first time that SFG has been used to probe the highly selective oxide-metal interface during catalytic reaction, and the results demonstrate that charge transfer from TiO(2) on a Pt/TiO(2) catalyst controls the product distribution of furfuraldehyde hydrogenation by an acid-base mechanism. Pt nanoparticles supported on TiO(2) and SiO(2) are used as catalysts for furfuraldehyde hydrogenation. As synthesized, the Pt nanoparticles are encapsulated in a layer of poly(vinylpyrrolidone) (PVP). The presence of PVP prevents interaction of the Pt nanoparticles with their support, so identical turnover rates and reaction selectivity is observed regardless of the supporting oxide. However, removal of the PVP with UV light results in a 50-fold enhancement in the formation of furfuryl alcohol by Pt supported on TiO(2), while no change is observed for the kinetics of Pt supported on SiO(2). SFG vibrational spectroscopy reveals that a furfuryl-oxy intermediate forms on TiO(2) as a result of a charge transfer interaction. This furfuryl-oxy intermediate is a highly active and selective precursor to furfuryl alcohol, and spectral analysis shows that the Pt/TiO(2) interface is required primarily for H spillover. Density functional calculations predict that O-vacancies on the TiO(2) surface activate the formation of the furfuryl-oxy intermediate via an electron transfer to furfuraldehyde, drawing a strong analogy between SMSI and acid-base catalysis.     

Catalytic Chemistry of Supported Heteropolyacids and Their Applications as Solid Acids to Industrial Processes

This article reviews recent research and development of supported heteropolyacid (HPA) catalysts; focusing on the acidic and catalytic properties. First the basic knowledge of solid HPAs is provided briefly to facilitate understanding of heterogeneous catalysis of HPAs. Secondly, the structure as well as the physical and chemical properties of supported HPA catalysts is described. Especially the layer structure of HPA dispersed on the surface of SiO₂ and the changes in the surface acidity with the loading level of HPA are discussed. For this purpose, temperature programmed desorption of benzonitrile devised by Okuhara and Kamiya’s group is useful. This method is capable to assess the surface acidity of the supported HPA, which controls the catalytic activity for the reactions proceeding by surface-type catalysis. Then, two new industrial processes developed by Showa Denko K. K. are described; (i) production of ethyl acetate from ethylene and acetic acid and (ii) oxidation of ethylene to acetic acid. Supported HPA catalysts are utilized for both processes, which were recently much improved by finely controlling the catalysts and reaction conditions.     

The catalytic nanodiode: detecting continuous electron flow at oxide-metal interfaces generated by a gas-phase exothermic reaction.

Continuous flow of ballistic charge carriers is generated by an exothermic chemical reaction and detected using the catalytic metal-semiconductor Schottky diode. We obtained a hot electron current for several hours using two types of catalytic nanodiodes, Pt/TiO2 or Pt/GaN, during carbon monoxide oxidation at pressures of 100 Torr of O2 and 40 Torr of CO at 413-573 K. This result reveals that the chemical energy of an exothermic catalytic reaction is directly converted into hot electrons flux in the catalytic nanodiode. By heating the nanodiodes in He, we could measure the thermoelectric current which is in the opposite direction to the flow of the hot electron current. The chemicurrent is well correlated with the turnover rate of CO oxidation, which is separately measured with gas chromatography. The influence of the flow of hot charge carriers on the chemistry at the oxide-metal interface, and the turnover rate in the chemical reaction are discussed.     

Catalysis by gold dispersed on supports: the importance of cationic gold

There are many examples of catalysis in solution by cationic complexes of gold, and recent results, reviewed here in this critical review, demonstrate that cationic gold species on oxide and zeolite supports are also catalytically active, for reactions including ethylene hydrogenation and CO oxidation. The catalytically active gold species on supports are evidently not restricted to isolated mononuclear gold complexes, but include gold clusters, which for at least some reactions are more active than the mononuclear complexes and for some reactions less active. Fundamental questions remain about the nature of cationic gold in supported catalysts, such as the nature of the cationic gold clusters and the nature of gold atoms at metal-support interfaces (88 references).     

Interfacial compatibility issues in rechargeable solid-state lithium metal batteries: a review

Solid-state lithium metal batteries(SSLBs) contain various kinds of interfaces, among which the solid electrode|solid electrolyte(ED|SE) interface plays a decisive role in the battery's power density and cycling stability. However, it is still lack of comprehensive knowledge and understanding about various interfacial physical/chemical processes so far. Although tremendous efforts have been dedicated to investigate the origin of large interfacial resistance and sluggish charge(electron/ion) transfer process, many scientific and technological challenges still remain to be clarified. In this review, we detach and discuss the critical individual challenge, including charge transfer process, chemical and electrochemical instability, space charge layers, physical contact and mechanical instability. The fundamental concepts, individual effects on the charge transfer and potential solutions are summarized based on material's thermodynamics, electrode kinetics and mechanical effects. It is anticipated that future research should focus on quantitative analysis, modeling analysis and in-situ microstructure characterizations in order to obtain an efficient manipulation about the complex interfacial behaviors in all solid-state Li batteries.     

Tuning of Photocatalytic Hydrogen Production and Photoinduced Intramolecular Electron Transfer Rates by Regioselective Bridging Ligand Substitution

Artificial photosynthesis based on supramolecular photocatalysts offers the unique possibility to study the molecular processes underlying catalytic conversion of photons into chemical fuels in great detail and to tune the properties of the photocatalyst by alterations of the molecular framework. Herein we focus on both possibilities in studying the photocatalytic reduction of protons by derivatives of the well‐known photocatalyst [(tbbpy)₂Ru(tpphz)PdCl₂](PF₆)₂ [4,4′‐di‐tert‐butyl‐2,2′‐bipyridine (tbbpy), tetrapyrido[3,2‐a:2′,3′‐c:3′′,2′′‐h:2′′′,3′′′‐j]phenazine (tpphz)]. We report on a modified photocatalyst where the crucial bridging ligand tpphz is substituted by bromine and investigate the effect of the structural variation on the catalytic properties of the complex and its ultrafast intramolecular charge transfer behavior. It is found that structural modification stabilizes the phenanthroline‐centered metal‐to‐ligand charge‐transfer state on the tpphz moiety, thereby reducing the electron transfer gradient across the entire electron‐relaying bridging ligand and at the same time accelerating nanosecond ground‐state recovery. The same structural modifications cause an overall reduction of the catalytic activity of the complex. Thus, the results highlight the potential of small structural variations in the molecular framework of supramolecular catalysts in understanding the photoinduced charge‐transfer processes and optimizing their catalytic performance.     

Catalytic Enantioselective Flow Processes with Solid‐Supported Chiral Catalysts

Sustainability concerns are the wind in the sails for the development of novel, more selective catalytic processes. Hence, chiral catalysts play a crucial role in the green production of enantioenriched compounds. To further increase the green profile of this approach, the use of solid‐supported catalytic species is appealing due to the reduced generation of waste, as well as the possibility of reusing the precious catalyst. Even more attractive is the implementation of flow processes based on these immobilized catalysts, a flexible strategy that allows to generate from milli‐ to multi‐gram amounts of chiral product with a reduced footprint set‐up. Herein, we will present the efforts devoted in our laboratory towards the immobilization of chiral catalysts and their use in single‐pass, highly enantioselective, flow processes. Proline, diarylprolinols, other aminocatalysts, squaramides, thioureas, phosphoric acids and even chiral ligands and metal‐based catalysts constitute our current toolkit of supported species for enantioselective catalysis.     

液/液界面电化学及其进展

液/液界面电化学及电分析化学与研究萃取和化学传感机理、相转移催化、药物释放、模拟生物膜等密切相关,近年来备受到关注. 文中结合作者课题组工作,介绍、综述该领域近十几年、尤其在液/液界面微观结构、电荷（离子与电子）转移反应及界面功能化的新进展.     

Readily accessible mesoporous silica nanoparticles supported chiral urea-amine bifunctional catalysts for enantioselective reactions

The main objective of this study is to develop readily accessible and recyclable solid catalysts for enantioselective reactions. To achieve this, magnetic MCM-41 and non-magnetic SBA-15 mesoporous supports were prepared, then mesoporous silica supported chiral urea-amine bifunctional catalysts were synthesized by grafting of chiral urea-amine ligand onto SBA-15 and magnetic MCM-41. The magnetic and non-magnetic supports and so-prepared solid catalysts were characterized by using different methods such as N₂ sorption measurements, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope-energy dispersive X-ray analysis (FESEM-EDX), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Results showed that (1R, 2R) or (1S, 2S)-1,2-diphenylethane-1,2-diamine was successively immobilized onto magnetic MCM-41 and SBA-15 pores. The heterogeneous chiral solid catalysts and their homogenous counterparts exhibited high activities both enantioselective transfer hydrogenation reaction (up to 99% conversion and 65% ee) and enantioselective Michael reaction (up to 98% conversion and 26% ee). Moreover, the SBA-15 supported solid catalysts were separated from the reaction mixture by simple filtration, whereas the magnetic MCM-41 supported solid catalysts were separated by simple magnetic decantation and reused in three consecutive catalytic experiments.     

Metal-oxide interfacial reactions: encapsulation of Pd on TiO2 (110)

The model system Pd/TiO2 (110) was used to evaluate the correlation between metal encapsulation and electronic structure of TiO2 crystals. We observed encapsulation of Pd clusters supported on TiO2 crystals, which were heavily Ar+ sputtered, Nb-doped, or reduced by vacuum annealing. In contrast, encapsulation was not observed on unreduced, undoped, or slightly sputtered TiO2 crystals. Our results indicate a strong dependence of the encapsulation process on the electron density in the conduction band of TiO2 and on the space charge formed at Pd/TiO2 interfaces. This behavior is controlled by the initial position of the Fermi energy level (EF) of the metal and the oxide before contact is established. We proved that encapsulation reactions are favored by n-type doping of the oxide and a large work function of the metal. On the basis of this mechanism, we conclude on general trends controlling encapsulation reactions of oxide-supported metal clusters and the strong metal-support interaction (SMSI).     

Molecular-level Manipulation of Interface Charge Transfer on Plasmonic Metal/MOF Heterostructures

Plasmon-excited hot carriers have drawn great attention for driving various chemical reactions, but the short lifetimes of hot carriers seriously restrict the performance of plasmonic photocatalysis. Constructing plasmonic metal/metal-organic framework (MOF) heterostructures has been proved as an effective strategy to extend the lifetimes of hot carriers. Due to the high molecular tunability of MOFs, the MOF substrate in plasmonic metal/MOF heterostructures is able to capture hot electrons on the conduction band of MOF and hot holes on its valence band, and thus offers an ideal platform to separately study the detailed mechanism of hot electron and hole transfer processes. This review focuses on a molecular-level understanding of both hot-electron and hot-hole transfer at plasmonic metal/MOF interfaces. The enhanced stability and photocatalytic performance by introducing MOF substrates are discussed for plasmonic metal/MOF heterostructures. Additionally, typical characterization technologies are also proposed as powerful tools for tracking hot carrier transfer process.     

Strong Metal-Support Interactions through Sulfur-Anchoring of Metal Catalysts on Carbon Supports

In supported metal catalysts, the supports would strongly interact with the metal components instead of just acting as a carrier, which greatly affects both of their synthesis and catalytic activity, selectivity, and stability. Carbon is considered as very important but inert support and thus hard to induce strong metal-support interaction (SMSI). This mini-review highlights that sulfur—a documented poison reagent for metal catalysts—when doped in a carbon supports can induce diverse SMSI phenomenon, including electronic metal-support interaction (EMSI), classic SMSI, and reactive metal-support interaction (RMSI). These SMSI between metal and sulfur-doped carbon (S−C) supports enables the catalysts with extraordinary resistance to sintering at high temperatures of up to 1100 °C, which allows the general synthesis of single-atom, alloy cluster, and intermetallic compound catalysts with high dispersion and metal loading for a variety of applications.     

通过g-C3N4担载MNi12 (Fe,Co, Cu,Zn)纳米团簇调节甲烷化

As a unique two-dimensional material, graphitic carbon nitride (g-C₃N₄) has received significant attention for its particular electronic structure and chemical performance. Its instinctive defect can provide a stable anchoring site for metals, potentially improving the surface reactivity. Ni-based catalysts are economical but their activity for CO₂ methanation is lower than that of noble metal catalysts. Ni nanoparticles (NPs) supported on a substrate can further enhance the stability and activity of catalysts. Based on the principles of strong metal-support interaction (SMSI) and the synergistic effect on an alloy, MNi₁₂/g-C₃N₄ composites as novel catalysts are expected to improve stability and catalytic performance of Ni-based catalysts. The configurations are established with core-shell structures of MNi₁₂ (M = Fe, Co, Cu, Zn) nanoparticles (NPs) supported on g-C₃N₄ in this work. In the CO₂ methanation reaction, the reactivity of CO on slab (E_CO) is a critical factor, which is relative to the catalytic activity. Thus, the catalytic reactivity of these complexes via CO adsorption were explored using density functional theory (DFT). The values of cohesive energy (E_coh) for MNi₁₂ NPs range from -39.90 eV to -34.82 eV, suggesting that the formation of these NPs is favored as per thermodynamics, and E_coh and partial density of state (PDOS) reveal that the central M atom with the less filled d-shell interacts more strongly with surface Ni atoms. Therefore, ZnNi₁₂ is the most unstable structure among all the studied alloy, and the synergistic effect is also the weakest among them. When MNi₁₂ NPs are supported on the g-C₃N₄ substrate, the binding energies (E_b) vary from -9.40 eV to -8.39 eV, indicating that g-C₃N₄ is indeed a good material for stabilizing these NPs. The PDOS analysis of pure g-C₃N₄ suggests the sp² dangling bonds of N atoms in g-C₃N₄ can stabilize these transition metal NPs. Furthermore, the results of CO adsorbed on MNi₁₂ NPs and MNi₁₂/g-C₃N₄ composites show that E_CO and d_CO reduced with the introduction of g-C₃N₄. According to the results of the analysis of the Hirshfeld charges and electrostatic potential (ESP), the reason is that CO obtains less electrons from MNi₁₂ NPs after deposition on the g-C₃N₄ substrate, which lowers the reactivity of CO on catalysts. Additionally, the deformation charge density is analyzed to investigate the interaction between the NPs and g-C₃N₄. With the introduction of g-C₃N₄, charge redistribution indicates the strong metal-support interaction, which further reduces the CO adsorption energy. In summary, MNi₁₂ supported on g-C₃N₄ exhibit not only high stability but also tunable reactivity in CO₂ methanation. These changes are beneficial for CO₂ methanation reaction.     

Inorganic Photochemistry:Past,Present, and Future

Transition metal complex, in its electronic excited state, has intriguing photophysical and photochemical properties that are substantially different from its ground state, Indeed, electronically excited metal complex can be viewed as hot chemical species that is readily synthesized by photo-excitation with UV-visible light. If the energy of excited metal complex can be properly manipulated, it may be possible to devise new catalytic system for converting light to chemical energy. In the context of energy conversion reactions and chemical sensing, it is important for biomolecular reactions at room temperature. Among the photochemical bimolecular reactions, the following three have the widest applications in photocatalysis, and these are (1) bimolecular outer-sphere electron transfer reactions, (2) bimoleculat inner-sphere atom transfer/abstract reactions, and (3) exciplex formation involving electronic excited state. The past of inorganic photochemistry has demonstrated the success of[Ru(bpy)₃]²⁺ as a powerful reagent for light-induced electron transfer reactions. Much of the current photochemistry research focus on coordinative unsaturated metal complexes, that are strongly photoluminescent and readily undergo substrate binding reactions in their excited states. In this lecture, I will review some of the past successful stories of[Ru(bpy)₃]²⁺ and discuss our current research on the luminescent metal-complexes prepared in my laboratory. I will end my lecture by proposing a clue for achieving light-induced multi-electron transfer reactions, which remains a challenge in photochemistry research.