A nitroxide diradical containing a ferrocen-1,1′-diyl-substituted 1,3-diazetidine-2,4-diimine coupler

An Aza-Wittig reaction of 1,1′-bis(triphenylphosphoranylidenamino)-ferrocene with 3-isocyanato-2,2,5,5-tetramethyl-2,5-dihydro-1H-pyrrol-1-oxyl and subsequent intramolecular [2+2]-cycloaddition of the bis(carbodiimide) intermediate was used for the synthesis of a 1,3-diazetidine-2,4-diimine moiety bearing two radical groups and bridging the cyclopentadienyl (Cp) rings. According to single-crystal X-ray data, the planar 2,4-diimino-1,3-diazetidine moiety adopts a perpendicular orientation with respect to the eclipsed Cp rings. One of the radical groups lies almost within the plane of the four-membered 1,3-diazetidine ring, while the other has a conformationally preferred orientation with dihedral angles ±62.3°. The two Cp rings are constricted by the 1,3-diazetidine-2,4-diimine moiety so that the angle between their planes is 11.0°. The synthesized diradical contains ferrocene and nitroxide redox signaling units that can be oxidized step-by-step at E_1/2 = 0.26 and 0.48 V (vs Fc/Fc⁺), respectively. Electron spin resonance spectroscopy revealed a moderate exchange interaction (|J| ～ a_N) between the two nitroxide radical moieties and the following values of zero-field splitting parameters: ∣D∣ = 3.5 mT and E/D = 0 were obtained. These data were in agreement with density functional theory calculations. The newly developed approach to multispin systems may be interesting for the construction of weakly coupled rigid polyradicals for quantum technologies, the molecular design of magnets, and the creation of ferrocene-based electron-paramagnetic-resonance–active chemical sensors.     

An efficient microwave assisted synthesis of N′-aryl/(alkyl)-substituted N-(4-hydroxy-6-phenylpyrimidin-2-yl)guanidines: Scope and limitations

Treatment of N-[(4-hydroxy-6-phenyl)pyrimidin-2-yl]cyanamide with 1° alkyl or arylamines in isopropyl alcohol for only 10 min at 110–120 °C under microwave conditions gave the corresponding N′-alkyl(aryl)guanidine derivatives in excellent yields (65–84%). Isolated yields were greatest when >1.0 equiv. of amines were employed, but excellent results were also obtained when aryl and alkylamines were reacted with a more atom-economical loading (1.0 equiv.; 70% and 72% ave. yields, respectively). Arylamines with either highly electron withdrawing substituents (e.g. CO₂H) or pi-deficient heterocycles (e.g. variously substituted aminopyridines) did not work well under these conditions, and reaction with ureas and/or amino acids did not give detectable products. Work-up was exceedingly simple, and involved simple collection and washing of product on a sintered glass funnel. Products were obtained in analytically pure form and required approximately 1 h to prepare, start to finish.     

A selective hydration of nitriles catalysed by a Pd(OAc)2-based system in water

In situ formation of a [Pd(OAc)₂bipy] (bipy = 2,2′-bipyridyl) complex in water selectively catalyses the hydration of a wide range of organonitriles at 70 °C. Catalyst loadings of 5 mol% afford primary amide products in excellent yields in the absence of hydration-promoting additives such as oximes and hydroxylamines.     

New all-cis-tetra(p-tolyl)cyclotetrasiloxanetetraol and its functionalization

New all-cis-tetra(p-tolyl)cyclotetrasiloxanetetraol and its derivatives with Si(CH = CH₂)Me and Si(H)Me₂ groups have been prepared and characterized by IR and NMR spectroscopy, GPC, mass spectrometry, TGA and DSC. Molecular and crystalline structures of the tetraol and its derivative with four Si(CH = CH₂)Me groups have been determined by single-crystal X-ray diffraction.     

Synthesis and properties of novel heat-resistant fluorescent conjugated polymers with bisindolylmaleimide

Novel conjugated polymers with bisindolymaleimide were synthesized via simple metal-free condensation polymerization. The polymers exhibited high glass transition temperatures and decomposition temperatures with considerable luminescent properties.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups

A new symmetric compound with azobenzene chromophore and epoxide groups, namely diglycidyl ether of 4,4′-dihydroxyazobenzene (DGEAB) was obtained and characterized. Its thermal behavior was monitored taking into account that many reactions of epoxides are carried out under heating. DGEAB was found to be stable up to 200 °C, but at higher temperature, its decomposition involves three step of degradation with the formation of an appreciable quantity of the char.     

Multiple-angle-of-incidence polarization infrared reflection-absorption spectroscopy (MAI-PIRRAS) for investigation of 6-Mercaptopurine SAMs on smooth silver surface

Multiple-angle-of-incidence polarization infrared reflection-absorption spectroscopy (MAI-PIRRAS) has been used to study the adsorption mode and structural properties of 6-Mercaptopurine (6MP) self-assembled monolayers (SAMs) on smooth silver surface. The in-plane vibrations of the 6MP SAMs show some enhancement compared with the spectrum of the solid powder of 6MP, while the out-of-plane vibrations are very weak. Assignments of the observed bands by DFT calculations show that both the thiol form and the tautomer of 6MP exist in the SAMs and adopt the S atom and the N7 or N1 atom anchoring the silver surface. In order to eliminate the influence of the angle of the incidence and obtain direct influence of the orientation of the 6MP to the spectral intensity, the adsorption intensity of the SAMs is multiplied by cos θ to obtain corrected spectra. The adsorption intensity attains to the maximum at 35–40° other than near the grazing angle. The characteristics of the spectra suggest that the SAMs of 6MP are arranged orderly in a parallel fashion with a dihedral angle of 35–40° between the ring plane and the silver surface.     

Line tension and its influence on droplets and particles at surfaces

In this review we examine the influence of the line tension τ on droplets and particles at surfaces. The line tension influences the nucleation behavior and contact angle of liquid droplets at both liquid and solid surfaces and alters the attachment energetics of solid particles to liquid surfaces. Many factors, occurring over a wide range of length scales, contribute to the line tension. On atomic scales, atomic rearrangements and reorientations of submolecular components give rise to an atomic line tension contribution τ_atom (～1 nN), which depends on the similarity/dissimilarity of the droplet/particle surface composition compared with the surface upon which it resides. At nanometer length scales, an integration over the van der Waals interfacial potential gives rise to a mesoscale contribution |τ_vdW| ～ 1–100 pN while, at millimeter length scales, the gravitational potential provides a gravitational contribution τ_grav ～ +1–10 μN. τ_grav is always positive, whereas, τ_vdW can have either sign. Near wetting, for very small contact angle droplets, a negative line tension may give rise to a contact line instability. We examine these and other issues in this review.     

Investigation on Lifting Angle of Polyimide Self-assembly Surface Micromachined Structure

This study presents a polyimide (PI) self-assembly technique for the development of three-dimensional surface micromachined structures. The effects of the geometric factors and the curing temperature of the PI elastic joints on the lifting angle of such microstructure are investigated. Under the optimized curing condition (380°C), a maximum 74° lifting angle of a 5.2 × 10^?11 kg-weight polysilicon microplate can achieved utilizing the large surface-tension force of a single PI joint. The lifting angle of the thermally actuated 3-D microstructures can be demonstrated in nearly directional proportion to the length/width-thickness ratio of PI joint and the temperature difference temperature.     

Synthesis and antiviral bioactivity of novel chalcone derivatives containing purine moiety

A series of novel chalcone derivatives containing purine group was synthesized and evaluated for their antiviral activities against cucumber mosaic virus and tobacco mosaic virus. Compound 3o exhibited remarkable antiviral activities and strong combining capacity to tobacco mosaic virus coat protein.     

Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries

Heteroatoms-doped carbon nanofiber membranes with flexible features were prepared by electrospinning with heterocyclic polyimide (PI) structures containing biphenyl and pyrimidine rings. The products with optimized treatment could achieve 695 mAh/g at 0.1 A/g and retain 245 mAh/g at 1.5 A/g after 300 cycles when used as anode for Li-ion batteries.     

Synthesis of 2-substituted benzofuran derivatives by the palladium-catalyzed intermolecular coupling of 2-fluoroallylic acetates with phenols

We investigated the intermolecular coupling reaction of 2-fluoroallylic acetates with simple phenols by the [Pd(C₃H₅)Cl]₂, DPPF, and KHMDS at 100 °C for 16 h, and succeeded in obtaining 2-substituted benzofuran derivatives in good to high yield through the C–F bond activation and intermolecular cyclization.     

In-line Raman spectroscopy and advanced process control for the extraction of anethole and fenchone from fennel (Foeniculum vulgare L. MILL.)

Plants are a desirable source for molecules of all kinds and for every purpose. Besides traditional techniques for extraction, plants are challenging for modern process engineering due to great variations because of their natural origin. One way to ensure high quality and low costs, as well as highly resource-efficient extraction, is in-line monitoring and process control. This study demonstrates the use of in-line Raman spectroscopy for monitoring the extraction of anethole and fenchone from fennel seed as a typical example. A partial least square calibration model with high accuracy was created. (Anethole: R² = 0.99, root mean square error of calibration (RMSEC) = 0.01256 g/L, root mean square error of validation (RMSEV) = 0.02608 g/L, and calibration range up to 2 g/L. Fenchone: R² = 0.98, RMSEC = 0.01188 g/L, RMSEV = 0.01945 g/L, and calibration up to 0.75 g/L.) These data are directly linked to a physicochemical process model to control the extraction process in real time and to perform predictive simulations while processing. The added value of this approach for modern phytoextraction is highlighted and exemplified as a major step toward sustainable Green Extraction processes.     

Gap-mode SERS studies of azobenzene-containing self-assembled monolayers on Au(1 1 1)

Self-assembled monolayers of azobenzene-containing thiols on smooth Au(1 1 1) surfaces were studied by gap-mode surface-enhanced Raman spectroscopy (gap-mode SERS). By adsorption of colloidal Au nanoparticles on top of the organic adlayer highly reproducible spectra with strongly enhanced intensities are obtained. The observed bands indicate a trans conformation of the azobenzene moieties and are in agreement with structural data for the molecular layer. A characteristic dependency on the terminal and the spacer groups of the molecules is found. Samples prepared during illumination with UV light show pronounced spectral differences that can be attributed to azobenzene in cis conformation.     

Assembly of a β-(1 → 3)-glucan laminarihexaose on ionic liquid support

An efficient method for the preparation of β-(1 → 3)-d-glucan laminarihexaose on ionic liquid (IL)-support is described. A β-(1 → 3)-glucan laminarihexaose was rapidly assembled in 15 h in a stereoselective fashion with an average yield of over 90% per step using an optimized combination of glycosylating agents. This ionic liquid support approach provides an efficient and fast means for the assembly of β-(1 → 3)-glucans.     

Design,synthesis, and fungicidal activity of novel 1,3,4-oxadiazole derivatives

Employing the intermediate derivatization method (IDM), a series of 1,3,4-oxadiazole derivatives containing arylpyrazoloxyl moiety were designed and synthesized. In vitro bioassays showed that these compounds have moderate to significant fungicidal activity against rice sheath blight and sorghum anthracnose. Furthermore, compound 20 is a promising fungicide for further development.     

Preparation and properties of zirconia nanotube-supported 12-tungstophosphoric acid catalyst

Zirconia nanotube-supported H₃PW₁₂O₄0 (HPW) catalysts exhibit high catalytic activities in the synthesis of fatty acid ethyl ester.     

Enhanced carbon dioxide adsorption performance and kinetic study of K and Al co-doped Li4SiO4

Effective K and Al incorporation in Li₄SiO₄ leads to the broadened adsorption temperature range and enhanced carbon dioxide adsorption performance.