基于透明质酸及硫堇层层自组装的前列腺特异性抗原免疫传感器的研究

将带负电荷的透明质酸(HA)和带正电荷的电子媒介体硫堇(Thi)层层自组装到壳聚糖修饰的玻碳电极表面,利用硫堇上的氨基固定纳米金(nano-Au)并固载前列腺特异性抗体(anti-PSA),制得新型前列腺特异性抗原电流型免疫传感器。通过循环伏安法(CV)、微分脉冲伏安法(DPV)考察了该免疫传感器的电化学特性,并对影响该免疫传感器性能的各种因素进行详细研究。在优化实验条件下,此免疫传感器的线性范围为0.5~4μg/L和4~25μg/L,检出限为0.2μg/L。该免疫传感器具有制备简单、灵敏度高、稳定性好等优点。     

基于聚硫堇和层层组装碳纳米管/HRP的过氧化氢传感器研究

将电聚合和层层组装方法有效结合构筑了聚硫堇（PTH）电子介体修饰的碳纳米管（CNTs）/辣根过氧化物酶（HRP）多层膜无试剂H2O2传感器.利用电化学阻抗谱对CNTs/HRP多层膜的组装过程进行监测,用循环伏安法和计时电流法研究了该HRP电极的电化学行为.探讨了酶组装层数、工作电位、pH值和碳纳米管对电极响应的影响.该...     

硫堇与DNA分子相互作用的电化学方法研究

采用交流阻抗技术和循环伏安法 ,研究了在硫堇自组装膜修饰金电极上 ,以及在硫堇或DNA吸附修饰的玻碳电极上 ,硫堇与DNA分子的相互作用;硫堇自组装膜修饰金电极与DNA分子作用后 ,阻抗增大 ,表明它们之间发生了作用 ;吸附在玻碳电极上的硫堇 (DNA)与DNA(硫堇 )作用后 ,峰电位和峰电流均发生了变化 ,结合光谱测定结果 ,表明硫堇与DNA分子间存在着嵌插、静电等作用 ,二者作用的反应速度与分子在电极上固定的位置有关;在PBS缓冲液中硫堇 -DNA的表观结合常数为4.9×104L·mol -1 ;交流阻抗技术和循环伏安法是研究小分子与DNA分子间相互作用的经济、快速、简便的方法     

基于中性红电聚合膜的伏安型甲胎蛋白免疫传感器

用循环伏安法在玻碳电极上电聚合一层稳定的中性红聚合物膜,再通过共价键合作用将戊二醛和甲胎蛋白抗体自组装到电极表面,最后用辣根过氧化物酶封闭电极上的非特异性吸附位点,并同时起到放大响应电流信号的作用,制得高灵敏伏安型甲胎蛋白抗原免疫传感器。实验结果表明,该传感器对甲胎蛋白抗原具有良好的电流响应,该传感器的线性范围为1.00～10.0ng/mL和10.0～200ng/mL,检出限(3σ)为0.40ng/mL。     

基于纳米金/硫堇层层自组装的新型电流型酶-癌胚抗原免疫传感器

将Nafion 膜固定在金电极(Au)表面, 通过静电吸附和共价键合作用将硫堇(Thi)和纳米金颗粒(nano-Au)层层自组装到Nafion膜修饰的金电极表面. 再通过形成的纳米金单层吸附癌胚抗体(anti-CEA), 最后用辣根过氧化物酶(HRP)代替牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点, 并同时起到放大响应电流信号的作用, 从而制得高灵敏、高稳定电流型酶-癌胚抗原(CEA)免疫传感器. 通过循环伏安和交流阻抗考察了电极表面的电化学特性, 并对该免疫传感器的性能进行了详细的研究. 该传感器对CEA检测的线性范围为2.5~80.0 ng/mL, 检测限为0.90 ng/mL.     

石墨烯/聚硫堇膜修饰玻碳电极上沙丁胺醇的电化学行为研究

采用循环伏安法和差分脉冲伏安法研究了沙丁胺醇在石墨烯/聚硫堇修饰玻碳电极上的电化学行为,该电化学传感器对沙丁胺醇显示出良好的电化学响应。在pH 7.0,扫描范围为-0.6~0.4 V,扫速为80 mV/s条件下,沙丁胺醇的氧化峰电流与其浓度在3.1×10-7~8.5×10-5mol/L范围内呈良好线性关系,检出限达9.6×10-8mol/L。结果显示石墨烯/聚硫堇修饰玻碳电极具有良好的重现性和稳定性。     

普鲁士蓝和茈四甲酸二酐衍生物膜修饰的过氧化氢生物传感器

以玻碳电极（GCE）为基底,采用恒电位法沉积一层普鲁士蓝（PB）,然后将j芑四甲酸二酐衍生物（PTC-NH,）自组装到其表面,形成既带氨基功能团,又可有效防止PB渗漏的导电膜。通过静电吸附和共价键合作用固定纳米金和辣根过氧化物酶（HRP）的复合物,从而制得性能优良的过氧化氢（H2O2）生物传感器。采用循环伏安法（CV）和计时电流法,考察了传感器的电化学性能。实验表明,本传感器具有灵敏度高、线性范围宽、检出限低、稳定性好、抗干扰能力强等特点。其线性范围为2．0×10^-6～1．4×10^-5mol／L;检出限为8．3×10^-7mol／L（S／N=3）。     

铁氰酸镍膜修饰金电极的研制及应用

通过层层组装的方法,将Ni^2＋和[Fe（CN）6]^3-交替沉积在巯基乙酸功能化的金电极表面．首次成功制备了铁氰酸镍多层膜修饰电极,用循环伏安法研究了该多层膜的电化学行为,实验表明峰电流随膜层数的增加而增加,膜均匀增长．该修饰电极对一价金属离子Na^＋,K^＋,NH4^＋具有选择性响应,尤其对K^＋存在准能斯特响应,响应范围0．01～1．0mol／L;而且该电极对抗坏血酸（AA）和S2O3^2-体系的氧化具有良好的电催化作用,线性范围分别为：1．14×10^-4～1．14×10^-3mol／L和5．0×10^-4～3．1×10^-3mol／L．     

波长检测型表面等离子体共振传感器对硫堇电聚合成膜的原位分析

利用波长检测型表面等离子体共振(SPR)传感器对硫堇在金膜表面的电化学聚合成膜过程进行了跟踪分析.结果表明,在固定入射角下SPR共振波长随循环伏安扫描周数的增加而线性红移,表明聚硫堇膜的生长是匀速的;扫描100周后共振波长红移总量为96.6 nm.对该实验结果进行理论拟合,得出聚硫堇膜的厚度约为71 nm.聚硫堇膜在酸性缓冲液中的电化学活性很高,其电化学反应过程受扩散控制,在一个完整的循环伏安扫描过程中SPR共振波长的变化完全可逆,说明聚硫堇膜的氧化反应和还原反应是一对可逆过程.与还原态聚硫堇膜相比,氧化态聚硫堇膜对应的SPR共振波长较大,说明氧化态聚硫堇膜折射率高.     

基于金纳米棒-壳聚糖复合膜的葡萄糖生物传感器

本文采用金纳米棒-壳聚糖复合膜固定葡萄糖氧化酶构建电流型葡萄糖生物传感器.通过电化学交流阻抗法和循环伏安法对酶膜状态进行了表征,得到了相应的等效电路和动力学参数.实验结果表明,金纳米棒-壳聚糖复合膜可以辅助电子传递,提高电极的电流响应,并使生物传感器的使用温度范围有很大的扩展.此传感器表现出对葡萄糖溶液浓度的优良响应,线性范围在2.78×10-5mol/L—2.22×10-3mol/L,响应灵敏度约为7.819μA.cm-2(mmol/L)-1,表观米氏常数为10mmol/L.本工作还研究了温度和溶液pH值对电极电流响应的影响.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.