Electroanalytical methods based on bimetallic nanomaterials for determination of pesticides: Past,present, and future

The excessive use of pesticides in agricultural or non-agricultural fields causes the emergence of environmental and human health problems. Therefore, there is a need to develop simple, fast, sensitive, selective, and low-cost methods for analyzing pesticides from different matrices. Although many analysis methods have been developed to determine pesticides, nanomaterial-based electroanalytical methods offer numerous advantages such as rapid and low cost of analysis, low sample volume requirement, field deployability, and miniaturization to improve the performance of the developed methods. Among different nanomaterials, bimetallic nanomaterials such as gold, platinum, palladium, nickel, and iron-based nanomaterials in combination with other metals have been extensively used as electrode modification agents due to their electrocatalytic characteristics and the synergistic effect of two metals. In this review, firstly, the basic information of pesticides and bimetallic nanomaterials was summarized. Properties, synthesize, and architectures of bimetallic nanomaterials and their nanocomposites were explained in detail. Current applications and utilization of bimetallic nanomaterials for pesticides detection were reviewed by selected studies with working range, the limit of detection, sensitivity, analytical application, and some experimental conditions. In conclusion, the current challenges and future trends for analyzing pesticides based on electroanalytical methods combined with bimetallic nanomaterials were highlighted.     

Micro-extraction of Xenobiotics and Biomolecules from Different Matrices on Nanostructures

Sample preparation is the backbone of any analytical procedure; it involves extraction and pre-concentration of the desired analytes; often at trace levels. The present article describes the applications of nanomaterials (carbon-based inorganic and polymeric materials) in miniaturized extraction such as solid phase micro-extraction, stir-bar sorptive extraction, liquid phase micro-extraction, and dispersive liquid phase micro-extraction in the analyses of aqueous samples. The nanoparticles used for micro-extractions are discussed on the basis of their chemical natures. The synthetic route and the preparation of nanomaterials are described along with the optimization strategies for micro-extraction. A comparison between the conventional materials and nanomaterials for micro-extraction is proposed. The key roles of the nanomaterials for the micro-extraction of different analytes such as drugs, pesticides, polycyclic aromatic hydrocarbons, proteins and peptides from aqueous samples are reported. The use of nanomaterials, combined with miniaturized micro-extraction techniques, proved to be highly promising for sample preparation of various matrices with analytes at trace levels.     

Recent Applications of Carbon Nanomaterials for microRNA Electrochemical Sensing

MicroRNA (miRNA) is an important tumor marker in the human body, and its early detection has a great influence on the survival rate of patients. Although there are many detection methods for miRNA at present such as northern blotting, real-time quantitative polymerase chain reaction, microarrays, and others, electrochemical biosensors have the advantages of low detection cost, small instrument size, simple operation, non-invasive detection and low consumption of reagents and solvents, and thus they play an important role in the early detection of cancer. In addition, with the development of nanotechnology, nano-biosensors show great potential. The application of various nanomaterials in the development of electrochemical biosensor has greatly improved the detection sensitivity of electrochemical biosensor. Among them, carbon nanomaterials which have unique electrical, optical, physical and chemical properties have attracted increasing attention. In particular, they have a large surface area, good biocompatibility and conductivity. Therefore, carbon nanomaterials combined with electrochemical methods can be used to detect miRNA quickly, easily and sensitively. In this review, we systematically review recent applications of different carbon nanomaterials (carbon nanotubes, graphene and its derivatives, graphitic carbon nitride, carbon dots, graphene quantum dots and other carbon nanomaterials) for miRNA electrochemical detection. In addition, we demonstrate the future prospects of electrochemical biosensors modified by carbon nanomaterials for the detection of miRNAs, and some suggestions for their development in the near future.     

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials – A Review

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency. Carbon-based nanomaterials (CBNs) with beneficial properties have a wide range of applications in various fields, including as concrete/geopolymer systems in construction. This paper comprehensively reviews the research progress on carbon-based nanomaterials (CBNs) used to develop extrusion-based 3D geopolymer printing (3DGP) technology, including dispersion techniques, mixing methods, and the materials′ performance. The rheological, mechanical, durability, and other characteristics of these materials are also examined. Furthermore, the existing research limitations and the prospects of using 3DGP technology to produce high-quality composite mixtures are critically evaluated.     

纳米材料在用于癌症诊断的呼出气挥发性有机物检测中的应用

细胞新陈代谢的变化会导致挥发性有机化合物（VOCs）类型及含量发生变化,因此可通过分析某些标志性VOCs简立起多种疾病早期诊断的模型. 人体呼出物中特征VOCs的检测作为一种非侵入性、无损的检测手段,近些年在疾病检测领域已成为世界范围内的研究热点. 其中,纳米材料可用于增强传感器性能,并使传感器便携式小型化,推进检测传感器进入临床. 在这篇综述中,作者将种类繁多的传感器中用到的纳米材料归纳总结为金属、金属氧化物、碳基、复合物和MOFs基纳米材料等几类,并讨论了不同类纳米材料在VOCs检测中的优劣势. 本文所建立起的分析方法及讨论有助于进一步了解检测技术的优越性与局限性. 最后,作者对利用VOCs的检测实现癌症早期筛选的研究及发展提出了个人观点.     

Application of carbon-based nanomaterials in sample preparation: A review

In this paper, a broad overview on the applications of different carbon-based nanomaterials, including nanodiamonds, fullerenes, carbon nanotubes, graphene, carbon nanofibers, carbon nanocones-disks and nanohorns, as well as their functionalized forms, in sample preparation is provided. Particular attention has been paid to graphene because many papers regarding its application in this research field are becoming available. The distinctive properties, derivatization methods and application techniques of these materials were summarized and compared. According to their research status and perspective, these nanomaterials were classified in four groups (I: graphene and carbon nanotubes; II: carbon nanofibers; III: fullerenes; and IV: nanodiamonds, carbon nanocones/disks and carbon nanohorns) and characteristics and future trends of every group were discussed.     

Extraction procedures in gas chromatographic determination of pesticides

Pesticides are necessary for increasing agricultural productivity; however, their enormous use contaminates air, water and food. Among various organic pesticides, organochlorine pesticides (OCPs) are most persistent; and though their use is banned, they are still used illegally. In contrast to OCPs, organophosphorous pesticides are less persistent and used most extensively, while synthetic pyrethroid pesticides are the least toxic and used as insecticides. Extensive use of these pesticides is vulnerable to the ecosystem. Various extraction methods are used worldwide both by the regulatory bodies and private laboratories for the determination of multi-residue pesticides in leafy vegetables. This mini review presents an update on extraction procedure in gas chromatographic methods of pesticides analysis in various samples with special emphasis on leafy vegetables. We have covered six years of work from 2008–2013, discussing various extraction methods and their applications.     

Advantages of Carbon Nanomaterials in Electrochemical Aptasensors for Food Analysis

Electrochemical aptasensors appear as promising tools in food analysis, able to provide sensitive, fast and cost‐effective analysis, with the added advantage of portability. Carbon nanomaterials and in particular carbon nanotubes and graphene are among the nanomaterials most often used to build electrochemical aptasensors due to their good electrical conductivity, large surface area and multiple functionalisation possibilities. This review aims to give an overview of the types of carbon nanomaterials and their composites which have been used to enhance the performance of electrochemical aptasensors. Examples are detailed for the biosensors which were tested with real food samples. In these aptasensors, carbon nanomaterials have played different roles, from facilitating the immobilization of high amounts of aptamer and enhancing the electroactive area of the sensors to roles as nanocarrier for signaling probes in amplification schemes or even as electroactive probes generating the output signal. The survey of recent literature shows a positive evolution towards increased aptasensor testing with food samples. However, many challenges remain related to the better characterization of nanomaterials used, clarifying the roles of specific components in multi‐component nanocomposites and widening the types of food matrices and analytes tested with the aptasensors. Although we are still far from knowing when these novel tools will replace classic analytical methods in food analysis, carbon nanomaterials will certainly continue to play an important role in the design of future electrochemical aptasensors for food analysis.     

Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications – A Review

3D concrete printing (3DCP) is an emerging additive manufacturing technology in the construction industry. Its challenges lie in the development of high-performance printable materials and printing processes. Recently developed carbon-based nanomaterials (CBNs) such as graphene, graphene oxide, graphene nanoplatelets, and carbon nanotubes, have various applications due to their exceptional mechanical, chemical, thermal, and electrical characteristics. CBNs also have found potential applications as a concrete ingredient as they enhance the microstructure and modify concrete properties at the molecular level. This paper focuses on state-of-the-art studies on CBNs, 3DCP technology, and CBNs in conventional and 3D printable cement-based composites including CBN dispersion techniques, concrete mixing methods, and fresh and hardened properties of concrete. Furthermore, the current limitations and future perspectives of 3DCP using CBNs to produce high-quality composite mixtures are discussed.     

水滑石基催化剂催化合成碳纳米材料的研究进展

碳纳米材料是一类推动能源存储、 多相催化、 高性能复合和生物医药等领域发展的重要材料, 可控合成碳纳米材料对相关领域的发展具有重要意义. 水滑石(LDHs)材料具有层板金属种类及含量可调等特点, 经焙烧、 还原后可制备出金属种类、 密度和粒径分布各异的高分散、 高稳定金属纳米催化剂, 可实现高效催化生长各种类型的碳纳米材料. 此外, 通过调控反应条件和反应器等, 可以影响LDHs基金属纳米催化剂催化生长的碳纳米材料的结构和性能. 本文总结了LDHs基金属纳米催化剂的可控制备、 碳纳米材料结构调控以及利用LDHs基催化剂制备的碳纳米材料的应用等方面的研究工作, 并阐明了催化剂的可控制备是控制合成碳纳米材料的核心手段, 这为利用LDHs基催化剂进一步合成更高性能碳纳米材料的研究指明了方向. 此外, 本文还结合近些年在光、 电及光热催化方面的研究进展, 展望了基于新型LDHs纳米结构生长碳纳米材料的研究前景.     

Carbon nanomaterial based electrochemical sensors for biogenic amines

This review describes recent advances in the use of carbon nanomaterials for electroanalytical detection of biogenic amines (BAs). It starts with a short introduction into carbon nanomaterials such as carbon nanotubes, graphene, nanodiamonds, carbon nanofibers, fullerenes, and their composites. Next, electrochemical sensing schemes are discussed for various BAs including dopamine, serotonin, epinephrine, norepinephrine, tyramine, histamine and putrescine. Examples are then given for methods for simultaneous detection of various BAs. Finally, we discuss the current and future challenges of carbon nanomaterial-based electrochemical sensors for BAs. The review contains 175 references.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins,Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.     

Nanomaterials for Biomedical Applications: Production,Characterisations, Recent Trends and Difficulties

Designing of nanomaterials has now become a top-priority research goal with a view to developing specific applications in the biomedical fields. In fact, the recent trends in the literature show that there is a lack of in-depth reviews that specifically highlight the current knowledge based on the design and production of nanomaterials. Considerations of size, shape, surface charge and microstructures are important factors in this regard as they affect the performance of nanoparticles (NPs). These parameters are also found to be dependent on their synthesis methods. The characterisation techniques that have been used for the investigation of these nanomaterials are relatively different in their concepts, sample preparation methods and obtained results. Consequently, this review article aims to carry out an in-depth discussion on the recent trends on nanomaterials for biomedical engineering, with a particular emphasis on the choices of the nanomaterials, preparation methods/instruments and characterisations techniques used for designing of nanomaterials. Key applications of these nanomaterials, such as tissue regeneration, medication delivery and wound healing, are also discussed briefly. Covering this knowledge gap will result in a better understanding of the role of nanomaterial design and subsequent larger-scale applications in terms of both its potential and difficulties.     

Oxygen reduction on carbon nanomaterial-modified glassy carbon electrodes in alkaline solution

Electroreduction of oxygen in alkaline solution on glassy carbon (GC) electrodes modified with different carbon nanomaterials has been studied. Electrochemical experiments were carried out in 0.1 M KOH employing the rotating disk electrode and rotating ring-disk electrode methods. The GC disk electrodes were modified with carbon nanomaterials using polytetrafluoroethylene as a binder. Four different carbon nanomaterials were used: multiwalled carbon nanotubes, carbon black powder, and two carbide-derived carbons (CDC). For the first time, the electrocatalytic behavior of CDC materials toward oxygen reduction is explored. Electrochemical characterization of the materials showed that all the carbon nanomaterial-modified GC electrodes are highly active for the reduction of oxygen in alkaline solutions.     

Recent development in nanomaterials fabricated paper-based colorimetric and fluorescent sensors: A review

The paper-based sensing devices have drawn a broad interest in analytical chemistry for colorimetric and fluorescent-based analysis of biological, environmental, clinical, and food samples. It is due to the simple, rapid, biodegradable, user-friendly, less expensive, and low waste generation into the environment. Here, the recent development of paper-based sensors fabricated with different noble metal nanoparticles (NPs) and semiconductor and carbon quantum dots (QDs) is demonstrated to analyze several chemical substances from various samples. User-friendly and portable recording devices such as digital cameras, smartphones, scanners, etc. along with color detecting softwares are employed to measure the color intensity of nanomaterials fabricated paper devices after the deposition of a sample solution containing various chemical substances. The advantages and disadvantages of incorporating nanomaterials in the paper substrate (direct deposition, inkjet printing, screen printing and wax printing) are illustrated. The mechanism for colorimetric, fluorescence, phosphorescence, and chemiluminescence sensing using noble metal NPs (Ag, Cu, and Au), semiconductors, and carbon QDs for the determination of metal ions, anions, pesticides, biomolecules, and other toxic chemical substances are discussed. Thus, this review article would be highly useful for scientists and researchers to design colorimetric sensors to monitor chemical toxicants in clinical, environment, foods, and many other related samples.     

毛细管电泳新型手性分离体系研究进展

在现代分离科学中,手性化合物的分离分析一直是研究的重点和难点。相比于高效液相色谱（HPLC）、气相色谱（GC）等传统色谱分析方法,毛细管电泳（CE）技术凭借其高效率、低消耗、分离模式多样化等诸多优势,已经发展成为手性分离研究领域最有应用前景的分析方法之一。近年来,研究人员在CE手性分析方法的构建过程中,基于毛细管电动色谱（EKC）、配体交换毛细管电泳（LECE）、毛细管电色谱（CEC）等各种基础电泳模式,不断地对传统手性分离体系进行优化和改造,构建出了许多高性能的新型手性CE分离体系。如利用各类功能化离子液体以"手性离子液体协同拆分""手性离子液体配体交换""离子液体手性选择剂"等模式设计出多种基于离子液体的CE手性分离体系;利用纳米材料独特的尺寸效应、多样性、可设计性等特点,直接或与传统手性选择剂有机结合构建CE手性分离体系。此外,金属有机骨架材料修饰、低共熔溶剂修饰、非连续分段式部分填充等各式新颖的CE手性分离体系也都被研究人员成功开发,并表现出较大的发展潜力。该综述将对近年来（尤其是2015~2019年）此类新型CE手性分离体系的发展状况进行梳理,并结合相应的手性识别机理研究和手性CE方法实际应用情况,对该领域存在的问题及发展前景进行分析和展望。     

Impact of graphene-based nanomaterials (GBNMs) on the structural and functional conformations of hepcidin peptide

Graphene-based nanomaterials (GBNMs) are widely used in various industrial and biomedical applications. GBNMs of different compositions, size and shapes are being introduced without thorough toxicity evaluation due to the unavailability of regulatory guidelines. Computational toxicity prediction methods are used by regulatory bodies to quickly assess health hazards caused by newer materials. Due to increasing demand of GBNMs in various size and functional groups in industrial and consumer based applications, rapid and reliable computational toxicity assessment methods are urgently needed. In the present work, we investigate the impact of graphene and graphene oxide nanomaterials on the structural conformations of small hepcidin peptide and compare the materials for their structural and conformational changes. Our molecular dynamics simulation studies revealed conformational changes in hepcidin due to its interaction with GBMNs, which results in a loss of its functional properties. Our results indicate that hepcidin peptide undergo severe structural deformations when superimposed on the graphene sheet in comparison to graphene oxide sheet. These observations suggest that graphene is more toxic than a graphene oxide nanosheet of similar area. Overall, this study indicates that computational methods based on structural deformation, using molecular dynamics (MD) simulations, can be used for the early evaluation of toxicity potential of novel nanomaterials.     

Carbon Dots: The Newest Member of the Carbon Nanomaterials Family

Carbon nanomaterials have been extensively researched in the past few years owing to their interesting properties. The massive research efforts resulted in the emergence of carbon dots, which belong to the carbon nanomaterials family. Carbon dots (C‐dots) have garnered the attention of researchers mainly due to their convenient availability from organic as well as inorganic materials and also due to the novel properties they exhibit. C‐Dots have been said to overcome the era of quantum dots, referring to their levels of toxicity and biocompatibility. In this review, we focus on the discovery of C‐dots, their structure and composition, surface passivation to enhance their optical properties, the various synthetic methods used, their applications in different areas, and future perspectives. Emphasis has been given to greener approaches for the synthesis of C‐dots in order to make them cost effective as well as to improve their biocompatibility.     

Magnetic nanomaterials for the removal,separation and preconcentration of organic and inorganic pollutants at trace levels and their practical applications: A review

The presence of organic and inorganic pollutants in nature even in very small concentrations threatens human and other living bodies health and makes it significant to remove, separate and preconcentrate these pollutants. Recently magnetic nano sorbents has been used frequently in the separation and preconcentration of these pollutants. The use of magnetic nano sorbents modified with inorganic and organic species has widespread applications in the solid phase extraction (SPE) studies due to its many unique properties. These modified nano sorbents are preferred due to their advantages such as high adsorption capacities and large surface areas. This review examined different types of magnetic materials such as magnetic carbon-based nano sorbents, inorganic nano sorbents with magnetic properties, magnetized biosorbents, magnetic metal-organic frameworks, and magnetized ionic liquids used in SPE studies. In this study, a comprehensive and systematic review of the separation and preconcentration of analytes such as heavy metal ions, drug active substances, pesticides, dyes, hormone disruptors, etc with SPE methods using magnetic nanomaterials has been revealed. Future aspects and challenges that may be encountered are discussed.     

基于多壁碳纳米管改进QuEChERS法结合气相色谱-串联质谱检测茶叶中10种拟除虫菊酯类农药残留

利用多壁碳纳米管(MWCNTs)QuEChERS法提取茶叶中拟除虫菊酯类残留农药,采用气相色谱-串联质谱(GC-MS/MS)分析测定,建立了一种灵敏度高、可靠性强的茶叶中农药残留检测方法。比较了单壁碳纳米管(SWCNTs)、MWCNTS、氨基化多壁碳纳米管和石墨烯4种碳纳米材料和其不同用量下的净化效果;采用正交试验设计对前处理最佳实验条件进行筛选,并对实验影响因素进行方差分析。结果表明:提取溶剂、碳纳米材料种类对10种拟除虫菊酯类农药回收率的影响具有极显著统计学差异(p<0.001),提取时间对回收率的影响有统计学差异(p<0.05),碳纳米材料用量对回收率影响不显著(p>0.05);最佳样品前处理条件为以乙腈为提取溶剂,超声提取35 min,净化剂为60 mg MWCNTs、200 mg PSA和200 mg C18。方法学考察表明,10种拟除虫菊酯类农药在0.01~2 mg/L范围内线性良好;检出限(LOD)为0.001~0.01 mg/kg,定量限(LOQ)为0.005~0.04 mg/kg;绿茶样品空白基质加标试验中,10种农药的回收率为91.4%~109.7%,相对标准偏差为0.12%~9.80%(n=6)。对花茶、绿茶、红茶3种茶叶基质进行基质效应(ME)评价,结果发现净化剂中加入MWCNTs在绿茶和红茶基质中能有效降低ME。利用该方法检测了市售120份茶叶中拟除虫菊酯类农药的残留,多个样品中检出目标物,但均未超标。该方法检测灵敏度高,可靠性好,具有良好的回收率和稳定性,能满足茶叶中农药残留快速定量分析的要求。