Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

Regulation of carbon distribution to construct high-sulfur-content cathode in lithium-sulfur batteries

Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^-1.To address the insulation nature of sulfur,nanocarbon composition is essential to afford acceptable cycling capacity but inevitably sacrifices the actual energy density under working conditions.Therefore,rational structural design of the carbon/sulfur composite cathode is of great significance to realize satisfactory electrochemical performances with limited carbon content.Herein,the cathode carbon distribution is rationally regulated to construct high-sulfur-content and high-performance Li-S batteries.Concretely,a double-layer carbon(DLC)cathode is prepared by fabricating a surface carbon layer on the carbon/sulfur composite.The surface carbon layer not only provides more electrochemically active surfaces,but also blocks the polysulfide shuttle.Consequently,the DLC configuration with an increased sulfur content by nearly 10 wt%renders an initial areal capacity of 3.40 mAh cm^-2 and capacity retention of 83.8%during 50 cycles,which is about two times than that of the low-sulfur-content cathode.The strategy of carbon distribution regulation affords an effective pathway to construct advanced high-sulfur-content cathodes for practical high-energy-density Li-S batteries.     

Boost oxygen reduction reaction performance by tuning the active sites in Fe-N-P-C catalysts

Cost-effective atomically dispersed Fe-N-P-C complex catalysts are promising to catalyze the oxygen reduction reaction(ORR)and replace Pt catalysts in fuel cells and metal-air batteries.However,it remains a challenge to increase the number of atomically dispersed active sites on these catalysts.Here we report a highly efficient impregnation-pyrolysis method to prepare effective ORR electrocatalysts with large amount of atomically dispersed Fe active sites from biomass.Two types of active catalyst centers were identified,namely atomically dispersed Fe sites and Fe_xP particles.The ORR rate of the atomically dispersed Fe sites is three orders of magnitude higher than it of Fe_xP particles.A linear correlation between the amount of the atomically dispersed Fe and the ORR activity was obtained,revealing the major contribution of the atomically dispersed Fe to the ORR activity.The number of atomically dispersed Fe increases as the Fe loading increased and reaching the maximum at 1.86 wt%Fe,resulting in the maximum ORR rate.Optimized Fe-N-P-C complex catalyst was used as the cathode catalyst in a homemade Zn-air battery and good performance of an energy density of 771 Wh kgZn^-1,a power density of 92.9 m W cm^-2 at 137 m A cm^-2 and an excellent durability were exhibited.     

Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry reforming

Carbon dioxide and methane are two main greenhouse gases which are contributed to serious global warming.Fortunately,dry reforming of methane(DRM),a very important reaction developed decades ago,can convert these two major greenhouse gases into value-added syngas or hydrogen.The main problem retarding its industrialization is the seriously coking formation upon the nickel-based catalysts.Herein,a series of confined indium-nickel(In-Ni)intermetallic alloy nanocatalysts(In_xNi@SiO₂)have been prepared and displayed superior coking resistance for DRM reaction.The sample containing 0.5 wt.%of In loading(In_0.5Ni@SiO₂)shows the best balance of carbon deposition resistance and DRM reactivity even after 430 h long term stability test.The boosted carbon resistance can be ascribed to the confinement of core–shell structure and to the transfer of electrons from Indium to Nickel in In-Ni intermetallic alloys due to the smaller electronegativity of In.Both the silica shell and the increase of electron cloud density on metallic Ni can weaken the ability of Ni to activate C–H bond and decrease the deep cracking process of methane.The reaction over the confined InNi intermetallic alloy nanocatalyst was conformed to the Langmuir-Hinshelwood(L-H)mechanism revealed by in situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS).This work provides a guidance to design high performance coking resistance catalysts for methane dry reforming to efficiently utilize these two main greenhouse gases.     

甲基萘烷基化催化剂积炭的烧炭研究

2，6-二甲基萘(2，6-DMN)是生产新型的高性能聚酯材料-聚萘二甲酸乙二醇酯(PEN)的原料。PEN具有优越的耐热性能、机械性能、化学稳定性、阻气性和耐紫外线及辐射性能，应用前景非常广阔。随着PEN的发展，对2，6-DMN的需求将不断增加。     

Über die Reaktion von Biphenyl mit Magnesium in flüssigem Ammoniak

The interaction between magnesium and biphenyl in liquid ammonia has been studied. It was shown that the metal adduct formed reacts slowly with the reaction medium to give tetrahydroderivatives of biphenyl.A comparative study was carried out in order to reveal the influence of the metal used on the reaction pathway. It was found that the nature of the reaction products markedly differs when lithium, sodium or magnesium were used in the reaction.Possible reaction mechanisms are discussed.     

Aromatic allylation via diazotization: variation of the allylic moiety and a short route to a benzazepine derivative

A continued study of the recently discovered diazotizative allylation (DiazAll) reaction of aniline derivatives is reported. Several allyl reagents, commonly used in radical allylation reactions, were evaluated, and some of these reagents resulted in allylation when used in the DiazAll reaction. The best result was obtained with allyl bromide. Substituted allylic bromides gave the corresponding allyl aromatic compounds in poor to excellent yields. In comparison with an established method for aromatic allylation, the DiazAll reaction performed well and was superior when a more complex allylic bromide was used. Finally, a new allylation-bromocyclization reaction was demonstrated and used in the synthesis of a known inhibitor of phenylethanolamine N-methyltransferase (PNMT), an enzyme involved in the biosynthesis of adrenaline.     

Investigation of reaction products of sulphuric acid with ilmenite

The reaction of sulphuric acid with titanium raw materials runs violently with simultaneous emission of gases. Such run of reaction creates danger of explosion. This process is very complicated from the reason of complexity of reactions and variety of compounds in reaction mixture. To determine safe conditions of reaction with high efficiency, it is necessary to investigate phase composition products of reaction. Products of reaction were investigated by using X-ray diffraction. However reaction products show high amorphy and this is the reason of difficulties to determine all phases. For this reason also was used additional method — ‘drop’ calorimeter. This method is used for determination of average specific heat of liquid or solid samples. In this case, this method was used for verification of phase composition of products of reaction. On the basis of investigation the phase composition of reaction product is following: titanyl sulfate, iron(III) sulfate, monohydrated iron(II) sulfate, magnesium sulfate and unreacted remainders of ilmenite and magnesium silicate.     

Kinetics of gas-phase hydrolysis of ethyl acetate catalyzed by immobilized lipase

Reactions catalyzed by supported enzymes present important advantages when compared with those in aqueous media or organic solvents: separation of enzymes from substrate is easily accomplished, enzyme stability may be improved, and control of the reaction products is more accurate. We present the experimental results of the kinetic study of ethyl acetate hydrolysis in gaseous phase catalyzed by a commercial immobilized lipase (Lipozyme IM; Novo Nordisk). The hydrolysis reaction was studied as a function of ethyl ester and water partial pressure at a constant temperature of 318 K. The amount of biocatalyst used was varied between 100 and 300 mg, and the reaction was studied in a flow-through glass microreactor. Under the conditions used, water was an important parameter in the gas-phase reaction. Activation energy was 24.8 kJ/mol and the overall order of reaction was one. Finally a Bi-Bi reaction mechanism is proposed.     

制备二苄基磷酸酯的工艺改进

以苯甲醇和三氯化磷为原料,通过三步反应合成了二苄基磷酸酯,总收率67.4%,其结构经IR表征。以三乙胺为缚酸剂,四氯化碳为前两步反应共同的溶剂,省略了第一步反应结束后的溶剂分离操作。     

无汞盐密封法测定高氯浓度水样的化学需氧量

提出了一种以重铬酸钾为氧化剂,以6%硫酸银代替硫酸汞作为掩蔽-催化剂消除高氯离子干扰,测定化学需氧量(COD)的无汞密封新方法。研究了反应温度、反应时间和硫酸银浓度等测定条件。该法可以避免汞盐对环境的污染,适合测定多种类型的水样。该法测定结果的相对标准偏差为1.4%(n=8),平均加标回收率为98.5%.     

Solid-phase synthesis of alkyl aryl ethers via the Ullmann condensation

Alkyl aryl ether formation is a frequently employed reaction in organic synthesis. Ullmann condensation is an alternative method to the widely used Mitsunobu reaction and is very useful in situations where application of the Mitsunobu reaction is limited. By application of this reaction to solid-phase synthesis of a series of alkyl aryl ethers, reaction conditions (catalyst, solvent, temperature, time, etc.) for a sterically hindered class of alcohols were investigated and optimized. A range of aryl halides was used to explore the scope of the reaction in solid phase.     

Synthesis of mono-substituted derivatives of 6-aminoquinoline

Several 6-aminoquinoline derivatives,which could be used in drug design,have been synthesized.The reaction conditions were comparatively studied,and the p-chloroaniline was used as optimum oxidant in Skraup-Doebner-Von Miller reaction.The nitro group was reduced effectively by SnCl₂ with no halo-removed occurred.     

3-戊烯腈在零价镍催化体系中的平衡反应

在探索3-戊烯腈氢氰化合成己二腈反应的机理过程中,发现3-戊烯腈在零价镍体系中可能同时存在多个平衡反应,在不外加氰化氢条件下,3-戊烯腈可以生成甲基戊二腈和己二腈.采用零价镍、膦配体和无水ZnCl2组成的催化体系研究了该反应过程,考察了反应温度和配体的影响,并采用原位红外对反应进行监测,提出了可能的反应机理.