Tribasic lead maleate and lead maleate: synthesis and structural and spectroscopic characterizations

We report on the synthesis and structure of tribasic lead maleate hemihydrate ([Pb4O3]C2H2(CO2)2.(1/2)H2O, TRIMAL) and lead maleate (PbC2H2(CO2)2, PBMAL). The structure of [Pb4O3]C2H2(CO2)2.(1/2)H2O, solved ab initio from X-ray powder diffraction data, consists of infinite slabs of edge-sharing OPb4 tetrahedra, of composition [Pb4O3], running along the c axis and linked together into a three-dimensional network by tetradentate maleate anionic ligands. The structure of PbC2H2(CO2)2, solved from single crystal diffraction data, is lamellar and contains double layers of heptacoordinated lead atoms, bonded only to the oxygen atoms of the maleate ligands. In both compounds, lead is in the oxidation state 2+ and the coordination polyhedra around the Pb2+ exhibit a hemidirected geometry and are strongly distorted as a result of the lone pair of electrons. The absence of protons on the acidic portion of the maleate moieties was confirmed by Raman spectroscopy and by 1H MAS and 1H-13C CP MAS NMR experiments. The two compounds were further characterized using chemical and thermogravimetric analyses.     

Melaminium maleate monohydrate

In the title compound, 2,4,6‐tri­amino‐1,3,5‐triazin‐1‐ium maleate monohydrate, C₃H₇N₆⁺·C₄H₃O₄⁻·H₂O, containing singly protonated melaminium residues, maleate(1−) anions and water mol­ecules, the components are linked by hydrogen bonds into a three‐dimensional framework structure. The melaminium residues are connected by two pairs of N—H⋯N hydrogen bonds into chains in the form of stacks, with a distance of 3.26 (1) Å between the triazine rings, clearly indicating π–π interactions. The maleate anion contains an intramolecular O—H⋯O hydrogen bond and the anions interact with the water mol­ecules via O—H⋯O hydrogen bonds, forming zigzag chains, also in the form of stacks, in which the almost‐planar maleate anions are separated by 3.26 (1) Å. The experimental geometries of the ions are compared with molecular‐orbital calculations of their gas‐phase geometries.     

Rapid identification and quantification of chlorpheniramine maleate or pheniramine maleate in pharmaceutical preparations by thin-layer chromatography-densitometry

Thin-layer chromatography (TLC)-densitometry was used to separate, identify, and quantitate chlorpheniramine maleate (CPM) and pheniramine maleate (PM) when present in combination with other drugs in pharmaceutical preparations of tablets, syrups, eye and ear drops, etc. CPM or PM was extracted (tablets, capsules, etc.) or diluted (liquid preparations, if needed) with 80% ethanol and isolated from other ingredients by TLC on silica gel G using cyclohexane-chloroform-methanol-diethylamine (4.5 + 4.0 + 0.5 + 1.0, v/v) as the mobile phase. Separated CPM and PM were detected under shortwave ultraviolet light and quantitated by scanning densitometry at 260 nm. Recoveries of CPM and PM were 100.09+/-0.77% and 100.09+/-0.87%, respectively.     

Spectrophotometric and fluorimetric determination of nomifensine maleate

Three methods have been developed for the determination of nomifensine maleate alone and in capsules: a spectrophotometric, an iodine charge-transfer, and a spectrofluorimetric method. All three give linear calibration graphs, over the ranges 20-100, 1-5 and 0.1-0.5 microg/ml, respectively, with coefficients of variation of 0.8, 1.3 and 1.3%, respectively.     

Dipotassium maleate with boric acid

In the title compound, poly[(μ₃‐boric acid)‐μ₄‐maleato‐dipotassium], [K₂(C₄H₂O₄){B(OH)₃}]_n, there are two independent K⁺ cations, one bonded to seven O atoms (three from boric acid and four from maleate), and the other eight‐coordinate via three boric acid and four maleate O atoms and a weak η¹‐type coordination to the C=C bond of the maleate central C atoms. Hydrogen bonding links the boric acid ligands and maleate dianions, completing the packing structure.     

Novel potentiometric sensors for pyrilamine maleate

The fabrication and electrochemical response characteristics of four novel potentiometric sensors for determination of pyrilamine maleate (PyraH) were described. The sensors include polymeric membrane electrodes (PME₁, PME₂) and carbon paste electrodes (CPE₁, CPE₂). The fabricated sensors were based on the ion-pair of pyrilamine with sodium tetraphenylborate (NaTPB) and ammonium reineckate (NH₄RN) using dibutyl phthalate (DBP) as plasticizing solvent. The sensors showed linear, stable and near-Nernstian slopes of 56.4 ± 0.4, 54.2 ± 0.2, 58.8 ± 0.3 and 57.9 ± 0.4 mV decade^?1 at 25 ± 0.1 °C and detection limits of 2.0 × 10^?5, 1.8 × 10^?5, 1.0 × 10^?5 and 9.5 × 10^?6 mol L^?1 for PME₁, PME₂, CPE₁ and CPE₂ sensors, respectively. The response time was less than 10 and 8 s for polymeric membrane and carbon paste sensors. The proposed sensors displayed good selectivity for pyrilamine with respect to a number of common inorganic and organic species. The thermal temperature coefficients of the investigated sensors were 0.9508, 0.7012, 0.9450 and 0.6497 mV °C^?1. Modified carbon paste sensors showed lower detection limits, higher thermal stability and faster response time than those of polymeric membrane sensors. The proposed sensors displayed useful analytical characteristics for determination of pyrilamine in pharmaceutical preparation and biological fluids (Human urine and plasma).     

Evidence for the degradation of maleate moiety in chlorpheniramine maleate solution using a stability-indicating HPLC method

The degradation phenomenon of maleate moiety of chlorpheniramine maleate in solution has been demonstrated by means of a peculiar ion-pair HPLC method developed by the authors, which permits the simultaneous determination of chlorpheniramine and maleate. A commercial cough drug containing chlorpheniramine maleate was dissolved in water with m-hydroxybenzoic acid as an internal standard, and then kept for several days at room temperature. It was recognized that the maleate content in the drug solution had gradually decreased, whereas chlorpheniramine content had not decreased. A simple solution of maleic acid was also kept for several days at room temperature, and it was also recognized that the maleate content in the solution preserved at the same concentration as the solution of the commercial cough drug had gradually decreased, and the percent of remaining maleate reached zero. The degraded peaks on HPLC chromatogram were not detected at all by UV detector, and the disappearance of maleate was ascertained by GC-MS. No detectable example of maleate of chlorpheniramine maleate in a commercial cough syrup has suggested that maleate moiety of chlorpheniramine maleate decomposed to carbon dioxide.     

Proton shielding tensors in potassium hydrogen maleate

The proton NMR in single crystals of potassium hydrogen maleate has been sttudied by means of multiple-pulse line-narrowing techniques. The magnetic shielding tensors of all magnetically inequivalent protons in the unit cell could be determined independently. Two of these protons are carboxylic, forming hydrogen bonds. The orientations of the shift tensors are consistent with the position of the hydrogens at the midpoints of the 0–0 intervals. The range of anisotropy of 32 ppm, found for the shift tensor of the caboxylic hydrogen, is larger than that found for hydrogen bonds in acids and seems to be characteristics of acidic salts.The other protons in the unit cell are olefinic. Two features distinguish this type of protons from those studied so far: (1) The magnetic shielding tensor is not even approximately axially symmetric, the principal values being ?2.4, ?5.1, ?7.3 ± 05 ppm (from adamantane); and (2) the principal directions reflect all characteristic directions of the carboncarbon double bond (while the CH direction is of no importance). The principal value in the direction perpendicular to the sp² system is the least shielded one.     

4‐Aminopyridinium hydrogen maleate

The title compound, C₅H₇N₂⁺·C₄H₃O₄⁻, crystallizes in space group P2₁ with one ion pair in the asymmetric unit. The hydrogen maleate anion possesses nearly planar geometry and displays an extremely short intramolecular O—H...O hydrogen bond, with an O...O distance of 2.4198 (19) Å. Classical N—H...O hydrogen bonds, together with short C—H...O contacts, generate an extensive hydrogen‐bonding network.     

Polarographic determination of chlorpheniramine maleate in pharmaceuticals

The electroreduction of chlorpheniramine maleate has been investigated by a.c. and d.c. polarography, coulometry and cyclic voltammetry. Polarograms recorded from 0.2 M sulphuric acid exhibit a single well-defined 2-electron wave. The current is diffusion-controlled and proportional to the concentration in the entire range 0.3–400 μg ml^?1. A simple and rapid method for the determination of chlorpheniramine maleate in tablets is described.     

Non-isothermal decomposition of silver maleate dihydrate and anhydrous silver fumarate

The non-isothermal decompositions of silver maleate dihydrate (C₄H₂O₄Ag₂2H₂O) and anhydrous silver fumarate (C₄H₂O₄Ag₂) were studied up to 500°C, in a dynamic atmosphere of air, by means of TG and DTA measurements. Both compounds showed some sublimation (at 120°C for silver maleate and at 180°C for silver fumarate) prior to the onset of decomposition (at 170°C for silver maleate and at 280°C for silver fumarate). The gaseous decomposition products of both compounds were found, using IR spectroscopy, to be dominated by maleic anhydride and CO₂. Minor proportions of ethylene, ethyl alcohol, acetone, methane and isobutene were also identified. Metallic silver was the final solid product, as identified by X-ray diffractometry. NMR analysis was used to monitor the isomerization of the maleate radical into the more stable fumarate above 230°C. Kinetic parameters (E _a and lnA) were calculated from the effect of heating rate, (2, 5, 10, and 20 deg min^?1) on the DTA measurements. A mechanism is suggested for the decomposition pathways of these compounds, on basis of the results obtained and, also, on similarities with analogous systems.     

Stability and compatibility study on enalapril maleate using thermoanalytical techniques

This paper demonstrates the application of thermal analysis in compatibility and stability studies between an ACE inhibitor (enalapril maleate) and excipients. The results have helped to elucidate the reason of a stability problem observed during the storage of enalapril maleate tablets. Incompatibility between enalapril maleate and colloidal silicon dioxide was detected. Besides, it was confirmed that the reaction between enalapril maleate and NaHCO₃ increases the thermal stability of the drug. This study supports the importance of using thermoanalytical methods in the development of pharmaceuticals.     

丁烯二酸二丁酯配体异构化的研究

用市售的未经分离提纯的顺丁烯二酸二丁酯与W(CO)4(phen)(phen=1,10-邻菲咯啉)在甲苯中加热回流24h,反应液经硅胶柱层析分离得到两个产物,分别用甲苯/石油醚重结晶,获得橙黄色块状晶体(1)和橙红色片状晶体(2)。用X射线衍射法测定其晶体结构分别为W(CO)2(phen)(DBF)2(1)与W(CO)2(phen)(DBF)(DBM)(2)(DBM=顺丁烯二酸二丁酯,DBF=反丁烯二酸二丁酸)。经对原料中的DBM和DBF含量的分析及对两种产物中DBF总量的计算表明配体DBM很可能在配位反应过程中有部分异构化为更稳定的配体DBF.     

Studies on hydroquinone based maleate bolaamphiphile organogels and their drug formulations

Now a day’s there is an upsurge in topical gel formulations, they can be prepared by varying physico-chemical methods and provide better localized action. A maleate based symmetric bolaamphiphile was synthesized by using cost-effective starting materials under mild reaction condition. The gelation ability of bolaamphiphile in aqueous medium was examined for a series of organic solvents. In hexane, the gelator showed better gelation ability with relatively higher critical strain (54 Pa) values. Further, the microscopic images of the gel revealed flakes like morphology, both the XRD and DFT studies revealed the presence of non covalent interactions. These gels showed a high internal-phase mole ratio of the topical drugs in the order of curcumin < salicylic acid < Ibuprofen. Formation of aqueous and organic gel-phase formulation may facilitate the topical medications for various applications related to ophthalmic and skin infections.