Multiplexed quantification of proteins adsorbed to surface-modified and non-modified microdialysis membranes

A simple and straightforward method for discovery and quantification of proteins adsorbed onto delicate and sensitive membrane surfaces is presented. The adsorbed proteins were enzymatically cleaved while still adsorbed onto the membranes using an on-surface enzymatic digestion (oSED). This was followed by isobaric tagging, nanoliquid chromatography, and tandem mass spectrometry. Protein adsorption on tri-block copolymer Poloxamer 407 surface-modified microdialysis (MD) membranes were compared with protein adsorption on unmodified MD membranes. Ventricular cerebrospinal fluid (vCSF) kept at 37 °C was used as sample matrix. In total, 19 proteins were quantified in two biological replicates. The surface-modified membranes adsorbed 33% less proteins than control membranes and the most abundant proteins were subunits of hemoglobin and clusterin. The adsorption of clusterin on the modified membranes was on average 36% compared to control membranes. The most common protein in vCSF, Albumin, was not identified adsorbed to the surface at all. It was also experimentally verified that oSED, in conjunction with tandem mass spectrometry can be used to quantify femtomole amounts of proteins adsorbed on limited and delicate surfaces, such as MD membranes. The method has great potential and can be used to study much more complex protein adsorption systems than previously reported.     

Trypsin entrapped in poly(diallyldimethylammonium chloride) silica sol-gel microreactor coupled to matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

An enzyme-immobilized capillary microreactor for rapid protein digestion and proteomics analysis is reported. The inner surface of the fused-silica capillary was coated with poly(diallyldimethylammonium chloride) (PDDA)-entrapped silica sol-gel matrix, followed by assembly of trypsin onto the PDDA-modified surface via electrostatic adsorption. The immobilization parameters such as PDDA content in the sol-gel matrix, trypsin concentration and pH were investigated in detail. Protein samples including beta-casein, myoglobin and cytochrome c could be effectively digested and electrophoretically separated simultaneously in such a modified capillary. Just 2.26 ng (corresponding to 0.10-0.14 picomole) of sample was sufficient for on-line capillary electrophoresis peptide mapping. The efficiency of the digestion was further demonstrated by digestion of a human liver cytoplasm sample and 253 proteins were identified in one unique run.     

Application of DNA-binding polymers for preparation of DNA for analysis by matrix-assisted laser desorption/ionization mass spectrometry

The susceptibility of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to the presence of salts in a sample, especially salts of alkali metals, requires careful and often tedious desalting procedures which complicate and slow the throughput of MS-based methods. A novel approach to sample preparation was developed based on the extraction of DNA out of solution onto a solid surface with an attached DNA-binding polymer, such as polyethyleneimine or polyvinylpyrrolidone. The observed binding is strong enough to sustain washing, and, as a result, desalting and concentration can be performed in a single fast step. After DNA has been immobilized on the surface and supernatant solution removed, subsequent addition of MALDI matrix releases material from the surface, which co-crystallizes with matrix. The mass spectrometric analysis is then performed directly from this support. Analysis of oligonucleotides and three-fold multiplexed SNP typing reactions performed by this method shows improved sensitivity and excellent resolution for various DNA fragments, together with high tolerance to various buffer components, such as alkali metals and surfactants. Simplicity and speed make it attractive for high-throughput sample preparation and analysis of oligonucleotide mixtures by MALDI-MS.     

Sample immobilization protocols for matrix-assisted laser-desorption mass spectrometry.

Methods are described for the purification of proteins prior to analysis by matrix-assisted laser-desorption mass spectrometry. Contaminated protein samples were immobilized onto the surfaces of sample targets and rinsed. In general, a layer of electrosprayed nitrocellulose gave better results than the roughened gold surface of an untreated target. Using this approach, spectra could be obtained from low picomole quantities of protein in the presence of contaminants which did not inhibit the binding of the protein to the substrate.     

Immobilization of proteins on gold coated porous membranes via an activated self-assembled monolayer of thioctic acid

A new methodology for efficient protein (e.g., antibodies, enzymes, etc.) immobilization on microporous nylon membranes for use in a variety of bioanalytical systems is introduced. The method utilizes an activated self-assembled monolayer (SAM) of thioctic acid on gold coated forms of the membranes. Via a carbodiimide mediated reaction, the protein is anchored to the gold surface through an amide bond with the terminal carboxyl group of the adsorbed thioctic acid. The immobilization efficiency is high (95% for a monoclonal immunoglobulin G(IgG) and the surface bound protein appears to be stable enough to resist any displacement by other proteins in a matrix as complex as serum. Immunological activity of immobilized antibody is retained as demonstrated via use of such membrances in colorimetric ELISA for human chorionic gonadatropin (hCG). The high protein immobilization efficiency, the high tensile strength of microporous nylon membranes, and the excellent electrochemical characteristics of gold make this approach very attractive for preparing biomembranes that should be useful in affinity chromatography, electrochemical immunosensing systems, flow-through enzyme reactors, etc.     

Electrospray interfacing of polymer microfluidics to MALDI-MS

The off-line coupling of polymer microfluidics to MALDI-MS is presented using electrospray deposition. Using polycarbonate microfluidic chips with integrated hydrophobic membrane electrospray tips, peptides and proteins are deposited onto a stainless steel target followed by MALDI-MS analysis. Microchip electrospray deposition is found to yield excellent spatial control and homogeneity of deposited peptide spots, and significantly improved MALDI-MS spectral reproducibility compared to traditional target preparation methods. A detection limit of 3.5 fmol is demonstrated for angiotensin. Furthermore, multiple electrospray tips on a single chip provide the ability to simultaneously elute parallel sample streams onto a MALDI target for high-throughput multiplexed analysis. Using a three-element electrospray tip array with 150 microm spacing, the simultaneous deposition of bradykinin, fibrinopeptide, and angiotensin is achieved with no cross talk between deposited samples. In addition, in-line proteolytic digestion of intact proteins is successfully achieved during the electrospray process by binding trypsin within the electrospray membrane, eliminating the need for on-probe digestion prior to MALDI-MS. The technology offers promise for a range of microfluidic platforms designed for high-throughput multiplexed proteomic analyses in which simultaneous on-chip separations require an effective interface to MS.     

Identification of peroxisomal membrane proteins of Saccharomyces cerevisiae by mass spectrometry

The identification of peroxisomal membrane proteins is very important to understand the import mechanisms of substrates and proteins into these organelles and the pathogenesis of human peroxisomal disorders like the Zellweger Syndrom. Peroxisomal membrane proteins were identified after separation by gel electrophoresis, tryptic digestion and mass spectrometric analysis. Using matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) and nanoliquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS), it was possible to identify 45 proteins of isolated yeast peroxisomal membranes.     

Effects of common surfactants on protein digestion and matrix-assisted laser desorption/ionization mass spectrometric analysis of the digested peptides using two-layer sample preparation

While surfactants are commonly used in preparing protein samples, their presence in a protein sample can potentially affect the enzymatic digestion process and the subsequent analysis of the resulting peptides by mass spectrometry. The extent of the tolerance of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to surfactant interference in peptide analysis is very much dependent on the matrix/sample preparation method. In this work the effects of four commonly used surfactants, namely n-octyl glucoside (OG), Triton X-100 (TX-100), 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) and sodium dodecyl sulfate (SDS), for biological sample preparation on trypsin digestion and MALDI-MS of the resulting digest are examined in detail within the context of using a two-layer method for MALDI matrix/sample preparation. Non-ionic and mild surfactants, such as OG, TX-100 or CHAPS, are found to have no significant effect on trypsin digestion with surfactant concentrations up to 1%. However, TX-100 and CHAPS interfere with the subsequent peptide analysis by MALDI-MS and should be removed prior to peptide analysis. OG is an MS-friendly surfactant and no effect is observed for MALDI peptide analysis. The effect of SDS on trypsin digestion in terms of the number of peptides generated and the overall protein sequence coverage by these peptides is found to be protein dependent. The use of SDS to solubilize hydrophobic membrane proteins, followed by trypsin digestion in the presence of 0.1% SDS, results in a peptide mixture that can be analyzed directly by MALDI-MS. These peptides are shown to provide better sequence coverage compared with those obtained without the use of SDS in the case of bacteriorhodopsin, a very hydrophobic transmembrane protein. This work illustrates that MALDI-MS with the two-layer sample preparation method can be used for direct analysis of protein digests with no or minimum sample cleanup after proteins are digested in a solution containing surfactants.     

Immobilization of trypsin on graphene oxide for microwave-assisted on-plate proteolysis combined with MALDI-MS analysis

With an ultra-high surface area and abundant functional groups, graphene oxide (GO) provides an ideal substrate for the immobilization of trypsin. We demonstrated that trypsin could be immobilized on GO sheets assisted by polymers as molecular spacers to maintain the activity of the enzyme. And with the trypsin-linked GO as the enzyme immobilization probe, a novel microwave-assisted on-plate digestion method has been developed with subsequent analysis by MALDI-MS. The feasibility and performance of the digestion approach were demonstrated by the proteolysis of standard proteins. The results show that this novel approach substantially accelerated proteolysis and reduced the time required for traditional procedures involving on-plate enzymatic digestion and sample preparation prior to MALDI-MS analysis. The novel digestion approach is simple and efficient, offering great promise for high throughput protein identification.     

Improved analysis of membrane protein by PVDF-aided, matrix-assisted laser desorption/ionization mass spectrometry

Characterization of membrane proteins remains an analytical challenge because of difficulties associated with tedious isolation and purification. This study presents the utility of the polyvinylidene difluoride (PVDF) membrane for direct sub-proteome profiling and membrane protein characterization by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The hydrophobic adsorption of protein, particularly membrane proteins, on the PVDF surface enables efficient on-PVDF washing to remove high concentrations of detergents and salts, such as up to 5% sodium dodecyl sulfate (SDS). The enhanced spectrum quality for MALDI detection is particularly notable for high molecular weight proteins. By using on-PVDF washing prior to MALDI detection, we obtained protein profiles of the detergent-containing and detergent-insoluble membrane fractions from Methylococcus capsulatus (Bath). Similar improvements of signal-to-noise ratios were shown on the MALDI spectra for proteins electroblotted from SDS-polyacrylamide gel electrophoresis (SDS-PAGE) onto the PVDF membrane. We have applied this strategy to obtain intact molecular weights of the particulate methane monooxygenase (pMMO) composed of three intrinsic membrane-bound proteins, PmoA, PmoB, and PmoC. Together with peptide sequencing by tandem mass spectrometry, post-translational modifications including N-terminal acetylation of PmoA and PmoC and alternative C-terminal truncation of PmoB were identified. The above results show that PVDF-aided MALDI-MS can be an effective approach for profiling and characterization of membrane proteins.