Synthesis of benzanthron derivatives for selective detection by fluorescence of copper ions

The paper reports on the synthesis of two new benzanthron derivatives with intense yellow-orange fluorescence and their copolymers with styrene. The photophysical characteristics of the new low and high molecular weight fluorescent compounds have been studied in organic solvents of different polarity. The effect of the chemical nature of the C-3 substituent on the photophysical properties of the new dyes is discussed. The complexes formed between the benzanthron fluorophores and metal cations in solution have been studied with regard to potential applications as fluorescent sensors for metal ion contamination. The results show that the C-3 substituent determines a selective response to the presence of Cu²⁺ cations. In the case of copolymers the effect of the metal cations on the fluorescence intensity is negligible.     

Carbazole- and Fluorene-Fused Aza-BODIPYs: NIR Fluorophores with High Brightness and Photostability

Three new aza-BODIPY dyes incorporating fused fluorene or carbazole moieties have been prepared. The dyes show significant enhancement of photophysical properties compared to the parent 1,3,5,7-tetraphenyl aza-BODIPY (TPAB): a bathochromic shift of the absorption maximum (up to 2700 cm⁻¹) and emission maximum (up to 2270 cm⁻¹); an almost threefold increase in molar absorption coefficients (to ca. 230 000 M⁻¹ cm⁻¹) and a significant increase in the fluorescence quantum yield to 49–66 %. Owing to the combination of these properties, the new aza-BODIPY dyes belong to the brightest NIR dyes reported. The dyes also show excellent photostability. Due to their outstanding properties, the new dyes represent a promising platform for further exploration in biomedical research. A pH indicator containing only one fused carbazole unit was also prepared and shows absorption and emission spectra that are bathochromically shifted by about 110 and 100 nm, respectively, compared to the indicator dye based on the TPAB chromophore.     

Extended Alkenyl and Alkynyl Benzotriazoles with Enhanced Two-Photon Absorption Properties as a Promising Alternative to Benzothiadiazoles

A series of donor–π–acceptor–π–donor (D -π-A-π-D) benzoazole dyes with 2H-benzo[d][1,2,3]triazole or BTD cores have been prepared and their photophysical properties characterized. The properties of these compounds display remarkable differences, mainly as a result of the electron-donor substituent. Dyes with the best properties have visible-light absorption over λ=400 nm, large Stokes shifts in the range of about 3500–6400 cm⁻¹, and good fluorescence emission with quantum yields of up to 0.78. The two-photon absorption properties were also studied to establish the relationship between structure and properties in the different compounds synthesized. These results provided cross sections of up to 1500 GM, with a predominance of S₂←S₀ transitions and a high charge-transfer character. Time-dependent DFT calculations supported the experimental results.     

Effect of metal centres and substituents on the structure and optoelectronic properties of diarylethene compounds: A theoretical study

Diarylethene derivatives are a class of fascinating photochromic materials because of their open and closed isomers with different absorption spectra and many other characteristics.To reveal the detailed structure and optoelectronic properties as well as the effect of metal centres and substituents on them,a systematic study on a series of diarylethene derivatives and their Re(I),Pt(II),and Ir(III) complexes was performed via theoretical calculation.The optimized geometries,electronic properties,frontier molecular orbitals,ionization potentials,electron affinities,reorganization energies,and absorption spectra for both of their open-and closed-isomers have been calculated and analyzed.Metal-coordination and substituents exhibit great influence on the photophysical,charge-injection and-transporting characteristics.In addition,the binding of F-with the boron atom of dimesitylboryl group through Lewis acid/base interactions also induces great changes of structural,photophysical and electronic properties for these diarylethene derivatives,and consequently the compound with the substituent of dimesitylboryl group can be used as selective near-infrared phosphorescent F-probe.     

Molecular design of corrole‐based D‐π‐A sensitizers for dye‐sensitized solar cell applications

First principles calculations based on density functional theory (DFT) have been performed to design a new set of donor‐corrole‐bridge‐acceptor type systems based on the gallium corroles for dye‐sensitized solar cell applications. The design strategy for these systems is based on the benchmark studies done on the experimentally tested aluminum, gallium, and tin metallocorroles. Unfortunately, corrole analogues display poor light to current conversion efficiencies in spite of their desirable photophysical properties. Thus, improving the efficiency of corrole analogues has become a major challenge and ways to identify solutions to this is of outstanding fundamental importance. This study shows the lack of charge directionality toward anchoring group as plausible reason for the poor efficiencies of reported corrole systems, which enabled us to fine‐tune the electronic and optical properties of new D‐π‐A type systems, COR1‐COR4. The molecular geometries, electronic structure, and binding orientation of these systems on TiO₂ surface were investigated using DFT, TD‐DFT, and PBC methods. When compared with the reported corroles, COR1‐COR4 have a smaller band gaps, red‐shifted absorption spectra with higher extinction coefficients (10⁵ M^?1 cm^?1) and improved nonlinear optical properties. Importantly, results revealed that these dyes bind with two‐arm mode to TiO₂ surface and the density of states of the dye@TiO₂ elucidate strong coupling between the dyes and TiO₂ surface. We anticipate that the unique photophysical properties of these sensitizers will trigger the experimental efforts to yield a new generation of sensitizers based on corrole macrocyle. © 2015 Wiley Periodicals, Inc.     

Driving the Emission Towards Blue by Controlling the HOMO-LUMO Energy Gap in BF2-Functionalized 2-(Imidazo[1,5-a]pyridin-3-yl)phenols

Several boron compounds with 2-(imidazo[1,5-a]pyridin-3-yl)phenols, differentiated by the nature of the substituent (R) in the para position of the hydroxy group, have been synthesized and thoroughly characterized both in solution (¹H, ¹³C, ¹¹B, ¹⁹F NMR) and in the solid state (X-ray). All derivatives displayed attractive photophysical properties like very high Stokes shift, high fluorescence quantum yields and a good photostability in solution. Time-Dependent Density Functional Theory (TD-DFT) calculations allowed to define the main electronic transitions as intra ligand transitions (¹ILT), which was corroborated by the Natural Transition Orbitals (NTOs) shapes. The HOMO-LUMO energy gap was correlated to the electronic properties of the substituent R on the phenolic ring, as quantified by its σ_p Hammett constant.     

Tetraaryl ZnII Porphyrinates Substituted at β‐Pyrrolic Positions as Sensitizers in Dye‐Sensitized Solar Cells: A Comparison with meso‐Disubstituted Push–Pull ZnII Porphyrinates

A facile and fast approach, based on microwave‐enhanced Sonogashira coupling, has been employed to obtain in good yields both mono‐ and, for the first time, disubstituted push–pull Zn^II porphyrinates bearing a variety of ethynylphenyl moieties at the β‐pyrrolic position(s). Furthermore, a comparative experimental, electrochemical, and theoretical investigation has been carried out on these β‐mono‐ or disubstituted Zn^II porphyrinates and meso‐disubstituted push–pull Zn^II porphyrinates. We have obtained evidence that, although the HOMO–LUMO energy gap of the meso‐substituted push–pull dyes is lower, so that charge transfer along the push–pull system therein is easier, the β‐mono‐ or disubstituted push–pull porphyrinic dyes show comparable or better efficiencies when acting as sensitizers in DSSCs. This behavior is apparently not attributable to more intense B and Q bands, but rather to more facile charge injection. This is suggested by the DFT electron distribution in a model of a β‐monosubstituted porphyrinic dye interacting with a TiO₂ surface and by the positive effect of the β substitution on the incident photon‐to‐current conversion efficiency (IPCE) spectra, which show a significant intensity over a broad wavelength range (350–650 nm). In contrast, meso‐substitution produces IPCE spectra with two less intense and well‐separated peaks. The positive effect exerted by a cyanoacrylic acid group attached to the ethynylphenyl substituent has been analyzed by a photophysical and theoretical approach. This provided supporting evidence of a contribution from charge‐transfer transitions to both the B and Q bands, thus producing, through conjugation, excited electrons close to the carboxylic anchoring group. Finally, the straightforward and effective synthetic procedures developed, as well as the efficiencies observed by photoelectrochemical measurements, make the described β‐monosubstituted Zn^II porphyrinates extremely promising sensitizers for use in DSSCs.     

Zinc(II) phthalocyanine containing Schiff base containing sulfonamide: synthesis,characterization, photophysical,and photochemical properties

Abstract

Synthesis and characterization of (E)-4-((5-bromo-2-(λ¹-oxidanyl)benzylidene)amino)-N-(5-methyl-1,3,4-thiadiazol-2-yl)benzenesulfonamide (1), its substituted phthalonitrile derivative (2), and its tetra substituted zinc(II) phthalocyanine complex (3) were performed. Compounds 1, 2, and 3 were characterized by methods such as elemental analyses, FT-IR, ¹H-NMR, ¹³C-NMR (except for 3), and MALDI-TOF mass spectra. The photophysical and photochemical properties of this substituted zinc(II) phthalocyanine complex aimed to be used as a photosensitizer were investigated in DMSO solution for determination of their photosensitizing abilities in photocatalytic applications such as photodynamic therapy (PDT). The influence of the substituent as a bioactive compound on the phthalocyanine skeleton on spectroscopic, photophysical, and photochemical properties were also determined and compared with unsubstituted zinc(II) phthalocyanine and some zinc(II) phthalocyanines containing different substituents previously studied. According to photophysical and photochemical investigations, 3 has potential as a photosensitizer for PDT.     

First generation poly(propyleneimine) dendrimers functionalised with 1,8-naphthalimide units as fluorescence sensors for metal cations and protons

The synthesis of two new green fluorescent poly(propyleneimine) dendrimers from first generation has been described. The new materials are comprised of a 1,8-naphthalimide fluorophore having a substituent at C-4 position. The substituent in the first case is a N,N-dimethylaminoethylamino group while in the second one it is N-methylpiperazine. The spectroscopic and photophysical characteristics of the new dendrimers determined in organic solvent of different polarity have been presented. Both dendrimers show substantial increases in their fluorescence intensity in the presence of metal cations (Zn²⁺, Co²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Cu²⁺, Fe³⁺ and Ag⁺) and protons. The influence of the photoinduced electron transfer on their sensing properties has been discussed.     

Designing a family of luminescent hybrid materials by 3-(triethoxysilyl)-propyl isocyanate grafted 2-hydroxynicotinic acid bridge molecules

The study concentrates on the syntheses of modified 2-hydroxynicotinic acid by 3-(triethoxysilyl)-propyl isocyanate (TESPIC) and the preparation of their corresponding organic-inorganic molecular-based hybrid material with the two components equipped with covalent bonds. The bridging unit is a derivative of 2-hydroxynicotinic acid which is utilized to coordinate to Tb³⁺, Eu³⁺ or Zn²⁺ and further occurred hydrolysis and polycondensation processes by functional triethoxysilyl groups. Ultraviolet absorption, phosphorescence spectra, and luminescence spectra were applied to characterize the photophysical properties of the obtained hybrid material and the above spectroscopic data present that the triplet energy of modified 2-hydroxynicotinic acid efficiently initiates the antenna effect and matches with the emissive energy level of metal ions. As a result, the intramolecular energy transfer process completed within these molecular-based hybrids and strong green or red emissions of Ln³⁺ have been obtained.     

Spectral and photophysical studies of thiazine dyes in triton X-100

The absorption spectra of several thiazine dyes such as thionine, azure A, azure B, azure C and methylene blue in aqueous solution of Triton X-100 show that dyes as electron acceptors form 11 charge-transfer (CT) or electron-donor-acceptor (EDA) complexes with Triton X-100, which acts as an electron donor. From the thermodynamic and spectrophotometric properties of these complexes, the abilities of dyes to accept an electron are in the order: azure C > thionine > azure A > azure B > methylene blue. The photogalvanic effect in the aqueous solution dye-surfactant has been studied. Generation of photovoltage supports a CT or EDA interaction between thiazine dyes and Triton X-100. There is a good correlation among the photophysical (photovoltage), spectral and thermodynamic properties of these complexes.     

Structures and excitation energies of Zn–tetraarylporphyrin analogues: A theoretical study

The photophysical properties of β-substituted Zn–tetraarylporphyrin (ZnTAP) analogues used as dyes in dye-sensitized solar cells were studied using density functional theory (DFT). Singlet-excitation energy calculations of ZnTAP analogues were performed using time-dependent DFT with B3LYP, B3PW91, PBE0 exchange–correlation functionals at 6-31G(d) and 6-31+G(d) basis sets using B3LYP/6-31G(d) geometries. The PBE0 functional at 6-31+G(d) basis set provided a better correlation with the experimental data for both B- and Q-bands. The inclusion of solvation effect in the calculations provided a good agreement in terms of B:Q_ave ratio of the oscillator strengths for both analogues with the experimental values. Analogue 2 has a higher and a more balanced charge-carrier transport rates than analogue 1. In general, the addition of an electron-donating group in the meso-substituent (analogue 2) resulted in a narrower band gap, higher oscillator strength, a more red-shifted absorption spectra, and better charge-transfer characteristics than analogue 1.     

Synthesis,DFT calculations,cyclic voltammetry and antibacterial activities of a new blue-violet dye and a new blue-green fluorescent heterocyclic system

The new blue-violet dye 2-(3-hydroxyimino-2,3-dihydroimidazo[1,2-a]pyridin-2-yliden)-2-(2-thienyl)acetonitrile was prepared in high yield from the reaction of 3-nitroimidazo[1,2-a]pyridine with 2-(2-thienyl)acetonitrile by nucleophilic substitution of hydrogen. Acylation of the hydroxyl group led to a new heterocyclic system, (pyrido[2′,1′:2,3] imidazo[4,5-b]thieno[2,3-e]pyridine-11-carbonitrile) with very strong blue-green fluorescent properties. Physical, spectral and analytical data have confirmed the structures of the synthesized dyes. The optical and solvatochromic properties of these compounds were investigated and showed interesting photophysical properties. Density functional theory calculations of blue-violet and fluorescent dyes were performed to provide the optimized geometries, Mulliken atomic charges, relevant frontier orbitals and the prediction of ¹H NMR chemical shifts. The electrochemical properties of these dyes were investigated by cyclic voltammetry and an oxidation wave was observed at a half-wave potential of −0.143 V versus SCE for the blue-violet dye. Also, these new compounds exhibited potent antibacterial activity against Gram positive and negative bacterial species.     

Promising sensitizers for dye sensitized solar cells: A comparison of Ru(II) with other earth's scarce and abundant metal polypyridine complexes

There has recently been a growing interest in dye sensitized solar cells (DSSCs) based on ruthenium metal, but due to the scarcity and high price of ruthenium, design of better and cheaper light adsorbent dyes based on more abundant metal ions is one of the key issues for future development of the DSSCs. Using density functional theory (DFT) and time-dependent DFT we have studied the properties of new and abundant metal ion-based polypyridyl dyes for p-type DSSCs and compared with ruthenium and other scarce metal ions. Molecular geometries, electronic structures, and optical absorption spectra have been calculated using an implicit solvent corresponding to acetonitrile. The calculated fair light harvesting efficiency, high hole injection efficiency and Gibbs free energy for the hole injection and longer excited state lifetime (important for reflecting the efficiency of solar cells) for the new abundant metal ions (V³⁺ and Cr²⁺) based dyes could provide promising sensitizers for efficient next generation DSSC's for p-SC.     

Exciton Interactions,Excimer Formation,and [2π+2π] Photodimerization in Nonconjugated Curcuminoid-BF2 Dimers

We describe the synthesis of a series of covalently linked dimers of quadrupolar curcuminoid-BF₂ dyes and the detailed investigation of their solvent-dependent spectroscopic and photophysical properties. In solvents of low polarity, intramolecular folding induces the formation of aggregated chromophores, the UV/Vis absorption spectra of which display the optical signature characteristic of weakly-coupled H-aggregates. The extent of folding and, in turn, of ground-state aggregation is strongly dependent on the nature of the flexible linker. Steady-state and time-resolved fluorescence emission spectroscopies show that the Frenkel exciton relaxes into a fluorescent symmetrical excimer state with a long lifetime. Furthermore, our in-depth studies show that a weakly emitting excimer lies on the pathway toward a photocyclomer. Two-dimensional ¹H NMR spectroscopy and density functional theory (DFT) allowed the structure of the photoproduct to be established. To our knowledge, this represents the first example of a [2π+2π] photodimerization of the curcuminoid chromophore.     

Investigation of the structure, the optical properties, and the photophysics of some indolocarbazoles having terminal aromatic rings

Structures, optical properties, and photophysics of ladder indolo[3,2-b]carbazoles substituted symmetrically by phenylene and thiophene rings have been investigated theoretically and experimentally. The ground state optimized structures were obtained using the density functional theory (DFT) as approximated by the B3LYP functional and employing the 6-31G^* basis set. All derivatives were found nonplanar in their electronic ground states. The character and the energy of the singlet–singlet electronic transitions have been investigated by applying the time-dependent density functional theory (TDDFT) to the correspondingly optimized-ground-state geometries. The ab initio restricted configuration interaction (singles) method (RCIS/6-31G^*) was adopted to obtain the first singlet excited-state structures (S₁) of the molecule. TDDFT calculations performed on the S₁ optimized geometries was used to obtain emission energies. UV–vis and fluorescence spectroscopies were analyzed in conjunction with theoretical calculations. The computed excitation and emission energies were found in reasonable agreement with the experimental absorption and fluorescence spectra. Finally, the photophysical behavior of the indolocarbazoles have been studied by means of steady state and time resolved fluorescence. The overall data have allowed the determination of the rate constants for the radiative and nonradiative decay processes. Both theoretical and experimental data show that the replacement of phenylene rings by thiophene units induces a red shift in the absorption and fluorescence spectra. This behavior is interpreted in terms of the electron donor properties of the thiophene ring. On the other hand, the change of the substitutional pattern, from 2,8 to 3,9, causes a significant hypsochromic shift of the absorption and fluorescence bands.     

The synthesis and the solvent and substituent effect on the spectroscopic characteristic of 3-ethyl-2-(p-substitued styryl)benzothiazolium iodides

The photophysical and photochemical properties of p-substitued 2-styryl-ethylbenzothiazolium iodides, possessing different electron-withdrawing or electron-donating groups are described. The dyes were prepared by the condensation of 3-ethyl-2-methylbenzothiazole salts with p-substituted benzaldehydes. The synthesis of suitable substrates is presented as well. We describe here the absorption, emission spectra and the luminescence quantum yield of hemicyanine dyes (SH) measured in 11 different organic solvents of varying polarity. Molecular structure of the synthesized dyes was established by (1)H NMR, electronic absorption and fluorescence spectrometry. The spectral data confirmed that all the compounds exist in E-configuration of their styryl residues. The planar molecular conformation is typical for the compounds with five-membered side aromatic moieties (for example benzothiazole). The compounds possessing N-alkyl substituent in phenyl ring, in contrast to the compounds with other substituents, exhibit low fluorescence quantum yield in THF solution. This indicates that for N-alkyl derivatives the non-radiative processes are much more effective than the radiative ones. The electronic absorption and fluorescence emission spectra of tested dyes demonstrate high sensitivity to the nature of substituent introduced into the aromatic ring.     

Ethoxy‐substituted Oligo‐phenylenevinylene‐Bridged Organic Dyes for Efficient Dye‐Sensitized Solar Cells

Organic dyes with ethoxy‐substituted oligo‐phenylenevinylene as chromophores were synthesized for dye‐sensitized solar cells (DSSCs), and the detailed relationships between the dye structures, photophysical properties, electrochemical properties, and performances of DSSCs were described. The dye S3O showed broad IPCE spectra in the spectral range of 350–750 nm, and the dye S1P showed solar energy‐to‐electricity conversion efficiency (() of up to 4.23% under AM 1.5 irradiation (100 mW/cm²) in comparison with the reference Ru‐complex (N719 dye) with an η value of 5.90% under similar experimental conditions.     

Synthesis and properties of crown ether functionalized coumarin substituted zinc phthalocyanine

The novel 6,7-[15-crown-5]-3-[p-(2,3-dicyanophenoxy)phenyl]coumarin (1) and its non-peripherally substituted zinc phthalocyanine complex (2) have been prepared and characterized by elemental analysis, ¹H NMR (for compound 1), MALDI-TOF, FT-IR and UV-Vis spectral data. Fluorescence intensity changes of compound 1 have been determined by addition of Na⁺ or K⁺ ions at 25 °C in THF. The effects of the chromenone crown ether substituent of the phthalocyanine molecule on the photophysical (fluorescence quantum yield and lifetime) and photochemical (singlet oxygen generation and photodegradation) properties were also investigated. The fluorescence of the zinc phthalocyanine complex is effectively quenched by addition of 1,4-benzoquinone (BQ).     

Theoretical investigations on electronic structures and photophysical properties of novel bridged triphenylamine derivatives

It has been proved that triphenylamine (TPA) derivatives can be excellent candidates for hole‐transporting materials in organic light‐emitting diodes (OLEDs). To improve on the thermal and morphological stability, a fully diarymethylene‐bridged TPA derivative (FATPA) which has been proven to enhance electroluminescent (EL) efficiency was synthesized. On the basis of FATPA, two series of novel bridged TPA derivatives have been designed by using diarylmethylene (Series A) or dimethyfluorene (Series B) as the linkage between the ortho‐positions of the phenyl rings in this work (see Fig. 1 ). To reveal the relationships between electronic structures and photophysical properties of these novel functional materials, an in‐depth theoretical investigation was elaborated via quantum chemical calculations using the density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) methods. In addition, the feasibility of using these bridged TPA derivatives as host in the device of ITO/MoO₃/NPB/mCP/host:Ir(ppy)₃/TAZ/LiF/Al was also evaluated, which including the discussion to their energy levels match with adjacent layers and energy transfer from host to guest. These calculated results show that photophysical properties can be easily tuned by the introduction of various substituent groups into the bridged TPA derivatives, such as the highest occupied molecular orbitals (HOMOs), the lowest unoccupied molecular orbitals (LUMOs), the energies difference between the HOMOs and LUMOs (Δ_H‐L), the lowest singlet (E_S) and triplet (E_T) excitation energies, ionization potentials (IPs), electron affinities (EAs), reorganization energies (λ) and the absorption and emission spectra, indicating that these bridged TPA derivatives have great potential applications for OLEDs. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012