金属卟啉/异烟酸/二氧化钛复合光催化剂制备及其光催化性能研究

合成了四苯基卟啉(H2TPP)及铜卟啉(CuTPP)和锌卟啉(ZnTPP),获得了配合物[Zn(TPP)(DMF)]的晶体。制备了金属卟啉、异烟酸共修饰的二氧化钛复合光催化剂:金属卟啉/异烟酸/二氧化钛,红外光谱和X-射线衍射(XRD)分析结果表明金属卟啉和异烟酸负载于TiO2表面,未改变TiO2的晶型。在光催化降解水中污染物4-硝基苯酚(4-NP)时显示了好的催化效果。     

RE-B共掺杂片层TiO2的合成及其光催化性能

采用溶胶-凝胶法,利用钛酸四丁酯、硝酸镧、硝酸铈和硼酸为原料,对TiO₂光催化剂进行稀土-B(RE-B)的共掺杂改性制备和性能研究。采用X-射线衍射法(XRD)、冷场发射扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外-可见吸收(UV-Vis)光谱和荧光(PL)光谱对制得样品的相组成、表面形貌结构、表面元素组成、光响应范围及带隙能和电子-空穴的复合情况进行了初步分析。结果表明,所制掺杂TiO₂的组成均为锐钛矿型,掺杂使晶格发生了较大畸变,且细晶粒由未掺杂的27 nm减小到RE-B-TiO₂的10 nm,形貌为片层状不规则堆放状态存在。XPS结果表明掺杂元素有效进入二氧化钛, PL谱显示共掺杂可有效延长光催化剂的载流子寿命。掺杂后吸收边均红移, La-B-TiO₂由TiO₂的405 nm移动到466 nm,相应地禁带宽度减小了0.4 eV。光催化实验表明:2 h内降解亚甲基蓝(MB)时掺杂能够同时提高紫外和可见光下二氧化钛的光催化效率,而共掺杂的降解效果又优于单掺杂, La-B-TiO₂紫外光下的降解率达到80.67%,为同等条件下纯TiO₂的2.7倍,可见光下的降解率为74.78%。     

B,N-SnO2/TiO2光催化剂的制备及其光催化性能研究

为了提高TiO₂在可见光下的光催化活性, 采用聚合物前驱体法制备了B,N共掺杂的SnO₂/TiO₂(B,N-SnO₂/TiO₂)粉体型光催化剂. 进一步为了提高光催化剂的实用性, 通过浸渍-裂解法制备了氧化铝纤维毡负载的B,N-SnO₂/TiO₂光催化剂. 利用X射线衍射仪、场发射扫描电子显微镜、场发射透射电子显微镜、X射线光电子能谱、比表面积分析仪、紫外-可见分光光度计等对其进行了表征. 以氧氟沙星水溶液为模拟污染物, 考察了B,N-SnO₂/TiO₂粉体型光催化剂和负载型光催化剂的可见光催化活性及稳定性. 结果表明, 该粉体型光催化剂在可见光下光照15 min, 对氧氟沙星的降解率可达98.3%. 负载型光催化剂也表现出了良好的光催化性能及可重复性和稳定性, 在21次重复使用后光催化性能几乎不发生变化.     

席夫碱铁-TiO2复合物光催化降解有毒有机污染物

运用化学合成方法制备了双(5-磺酸钠水杨醛)邻苯二胺席夫碱[N,N -Bis-schiff-base-5-sulfonate-salicylalidene- o-phenylenediamine sodium, SSPA]铁(III)配合物(FeSSPA), 采用无机钛盐醇解法制备了席夫碱铁-TiO₂复合物催化剂(FeSSPA-TiO₂). 通过紫外-可见反射光谱(UV-Vis DRS)、透射电镜(TEM)对制备催化剂进行了表征. 利用FeSSPA-TiO₂可见光(λ＞420 nm)激发活化分子氧降解有机染料罗丹明B (Rhodamine B, RhB)、无色小分子2,4-二氯苯酚(2,4-Dichlorophenol, 2,4-DCP)及水杨酸(Salicylic acid, SA), 研究了FeSSPA-TiO₂的光催化性能. 结果表明, FeSSPA-TiO₂光催化剂在pH 6.7, 可见光照射条件下, 80 min RhB褪色率达到100%, 20 h小分子2,4-DCP, SA的降解率分别达到67%, 100%. 在实验条件下, 33 h对RhB矿化率达到70.5%. 通过反应过程中氧化物种的测定, 发现降解过程主要涉及超氧自由基( )的氧化机理.     

纳米二氧化钛光催化降解喹啉动力学

利用溶胶-凝胶法制备纳米二氧化钛光催化剂,探讨了其光催化降解废水中典型含氮杂环化合物喹啉的动力学行为。实验条件下,TiO₂光催化降解喹啉的反应为准一级反应,可用Langmuir-Hinshelwood动力学模型描述,其表达式为r=0.296kc_t/(1+0.296c_t),其中,lnk =-0.411 1lnc₀+2.278。     

(BiO)2CO3-Bi-TiO2复合纳米纤维制备及其光催化降解抗生素

以静电纺丝制备的TiO₂纳米纤维为基质,葡萄糖为还原剂,在不同的酸碱环境中,采用一步水热法可控合成了异质结型Bi-TiO₂、(BiO)₂CO₃-TiO₂和(BiO)₂CO₃-Bi-TiO₂复合纳米纤维光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和光致发光光谱(PL)等对样品进行表征。以洛美沙星、环丙沙星和诺氟沙星为目标污染物,研究了TiO₂及其复合纳米纤维的光催化降解性能,并探究其降解反应机理。结果表明,(BiO)₂CO₃-Bi-TiO₂光催化活性最高,模拟太阳光照60 min,对诺氟沙星、洛美沙星和环丙沙星的降解率分别达到93.2%、97.5%和100%。     

Ag/Ag2WO4等离子体共振催化剂可见光催化还原CO2

转化CO₂为有机组分是缓解全球变暖和保障持续能源供给的有效方法之一.采用简易的离子交换结合水合肼还原法制备了一系列不同晶相Ag₂WO₄载银(Ag/Ag₂WO₄)的等离子共振光催化剂,并用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜-能量色散X射线光谱(SEM-EDS)、紫外-可见(UV-Vis)吸收光谱和比表面积测试对催化剂进行了表征.较之Ag₂WO₄, Ag/Ag₂WO₄在可见光催化还原CO₂生成CH₄时显示了明显提高的量子产率(QY)、能量投入产出比(EROEI)、转换数(TON),就Ag/α-Ag₂WO₄, Ag/β-Ag₂WO₄和Ag/γ-Ag₂WO₄而言,最佳催化剂为Ag/β-Ag₂WO₄,其实际最佳Ag:Ag₂WO₄摩尔比为4:96,该催化剂还原CO₂为CH₄的QY、EROEI、TON和拟一级反应速率常数分别为0.145%、0.067%、9.61和1.96×10^-6 min^-1.此外,制备的等离子共振Ag/Ag₂WO₄光催化剂在可见光辐照下进行循环反应仍能保持稳定性.局域表面等离子共振效应是强化Ag/Ag₂WO₄光催化剂活性和稳定性的主要原因.     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B(RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe...     

钨含量对W/SiO2/Al2O3催化剂上1-丁烯自歧化反应的影响

采用浸渍法制备了一系列钨负载量不同的W/SiO₂/Al₂O₃ 催化剂. 采用X 射线衍射(XRD)、激光拉曼(Raman)光谱、紫外-可见(UV-Vis)光谱、氢气程序升温还原(H₂-TPR)和氨程序升温脱附(NH₃-TPD)等技术对催化剂进行了表征. 实验结果表明: 钨的负载量对催化剂上氧化钨物种的分散程度、还原性以及催化剂的酸性有非常重要的影响. 对该类催化剂上1-丁烯自歧化反应进行了详细考察, 结果表明: 当钨的质量分数为6.0%时,W/SiO₂/Al₂O₃催化剂表现出最佳的歧化活性和稳定性. 原因在于6.0%的钨负载量可以使催化剂上氧化钨物种具有中等程度的分散性、合适的还原性, 并且使催化剂具有一定程度的酸性, 这些因素有利于在催化剂上形成烯烃歧化活性位.     

乙酸修饰Ag/TiO2复合光催化剂的制备及协同催化性能

利用光化学还原法制备了Ag/TiO₂,然后通过乙酸浸渍制备了HAc-Ag/TiO₂复合光催化剂.利用X射线衍射（XRD）、透射电子显微镜（TEM）、傅里叶变换红外光谱（FTIR）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）等手段表征了催化剂的性质.以降解水溶液中的甲基橙（MO）为探针反应,考察了催化剂在可见光下的光催化性能.结果表明,乙酸对TiO₂的修饰在TiO₂禁带中产生了"带尾",使TiO₂的禁带宽度发生了显著的缩减;Ag纳米粒子和乙酸共同修饰的HAc-Ag/TiO₂样品具有更窄的禁带宽度和更正的价带顶位置;Ag和乙酸的协同作用使HAc-Ag/TiO₂具有良好的可见光催化活性：可见光照射2 h后,甲基橙在HAc-Ag/TiO₂上的降解率接近100%.     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.