固相萃取-高效液相色谱法测定动物尿样中的莱克多巴胺

莱克多巴胺（ractopamine）是一种新型的β-肾上腺素兴奋剂，我国农业部、卫生部、国家药品监督管理局在2002年联合下发的176号公告中已经明确将其列入禁用药品名单。目前，文献报道的莱克多巴胺的检测方法很少，特别是国内还未见文献报道。由于莱克多巴胺在动物体内代谢较快，因而药物往往以原形的形式从体内排出。检测动物尿样具有快速、准确等特点，建立动物尿样中的莱克多巴胺的检测方法可以对畜产品生产过程中使用莱克多巴胺的现象进行有效的监控。因此，探索动物尿样中莱克多巴胺的检测方法具有非常重要的理论意义和实际价值。本文建立了动物尿样中莱克多巴胺残留量的高效液相色谱（HPLC）测定方法，样品处理简单，灵敏度高。     

喷射式电化学发光猝灭法快速测定莱克多巴胺

基于莱克多巴胺对Ru(bpy)2+3/N-丁基二乙醇胺电化学发光体系的强烈猝灭效应,结合喷射式分析技术,建立了一种能够快速、灵敏地用于检测莱克多巴胺残留的新方法。在优化后的实验条件下,体系的相对发光强度与莱克多巴胺的浓度在1.0×10-9~1.0×10-5 g/mL范围内呈良好的线性关系,检测限(S/N=3)为5.0×10-10 g/mL。对含1.0×10-8 g/mL莱克多巴胺的发光体系进行11次重复测定,所得相对标准偏差为1.23%。该方法可用于猪尿中莱克多巴胺残留的测定。     

莱克多巴胺免疫亲和柱的制备与应用研究

用多元酸酐与混合酸酐相结合的方法合成了莱克多巴胺(Rac)抗原,免疫动物获得特异性抗体,并以蛋白A柱纯化得到IgG抗体。琼脂糖凝胶(Sepharose 4B)经溴化氰(CNBr)活化后与IgG抗体偶联,制备莱克多巴胺免疫吸附剂。据此建立了尿液中莱克多巴胺的免疫亲和柱净化/液相色谱-荧光法(HPLC-FL)测定的分析方法。免疫制备特异抗体50%抑制浓度(IC50)为5μg/L。Sepharose 4B经CNBr活化后与2 mg抗体的偶联率达87.4%。1 mL吸附剂的柱容量为67.57 ng。尿液中莱克多巴胺的回收率为76%~90%。     

分子印迹固相萃取-高效液相色谱法测定饲料中莱克多巴胺

以莱克多巴胺为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对莱克多巴胺具有高选择性的分子印迹聚合物。考察了甲醇、乙腈、丙酮和氯仿-甲醇与三乙胺构成致孔剂合成的聚合物性能及其形貌特征。通过正交试验优化的聚合反应配方为: 1.0 mmol莱克多巴胺,4.0 mmol丙烯酰胺,20.0 mmol乙二醇二甲基丙烯酸酯,6.0 mL乙腈-三乙胺(30:1, v/v), 50.0 mg偶氮二异丁腈。建立的基于分子印迹固相萃取-高效液相色谱测定饲料试样中莱克多巴胺的方法,在0.50～100 mg/L质量浓度范围内有良好的线性关系(r=0.9994);饲料试样中1.0、10及100 mg/kg 3个添加水平的莱克多巴胺平均回收率大于80%;批内、批间测定的相对标准偏差小于10%;检出限(信噪比为3)达到0.1 mg/kg。该方法灵敏、可靠,用于饲料等复杂基质中莱克多巴胺检测的效果优于相关标准分析方法。     

表面等离子体共振生物传感器连续检测莱克多巴胺

利用表面等离子体共振生物传感器对莱克多巴胺抗体与固定在芯片表面的莱克多巴胺衍生物的相互作用进行了分析,解离常数为2.56×10-6s-1。根据一定范围内相对响应值和时间近似呈线性关系的动力学特性,建立了连续检测的方法,从而简化了实验步骤,有利于提高芯片的使用寿命。检测莱克多巴胺采用抑制法,将莱克多巴胺衍生物固定在芯片的表面,莱克多巴胺抗体与样品混合后流过芯片的表面,所得相对响应值与样品中莱克多巴胺的浓度成反比。单个样品的检测时间设定为15min,对应的检出限小于4μg/L。     

气相色谱-质谱法测定肝脏组织中盐酸克伦特罗和盐酸菜克多巴胺

建立了同时测定动物肝组织中盐酸克伦特罗和盐酸莱克多巴胺残留量的固相萃取-气相色谱-质谱分析方法。动物肝组织样品在碱化的条件下用乙酸乙酯和异丙醇混合溶剂提取，提取液浓缩后用乙酸乙酯溶解，然后再用稀盐酸反萃取去除脂肪，调pH值后经SCX固相萃取（SPE）柱净化，洗脱液经氮气吹干后经双三甲基硅基三氟乙酰氨（BSTFA）衍生，采用选择离子模式（盐酸克伦特罗：86、212、262、277，盐酸莱克多巴胺：163、192、234、250）进行测定，外标法定量。盐酸克伦特罗和盐酸莱克多巴胺的检出限分别为0．30和1．00μg／kg。盐酸克伦特罗添加浓度在1．0～5．0μg／kg范围内，添加回收率为77．4％～88．3％；相对标准偏差（RSD）为3．1％～5．1％；盐酸莱克多巴胺添加浓度在4．0～20．0μg／kg，添加回收率为69．8％～82．1％；相对标准偏差（RSD）为3．5％～4．9％；衍生物的峰面积与被测物浓度分别在0．003～1．00mg／L和0．012～4．00mg／L范围内呈良好的线性关系，线性回归系数均大于0．999。     

超高效液相色谱-串联质谱法测定牛羊肉中瘦肉精

建立超高效液相色谱-串联质谱（UPLC-MS/MS）法测定牛羊肉中3种瘦肉精残留量。牛羊肉中的瘦肉精残留物通过提取、净化后进超高效液相色谱-串联质谱仪进行分析测定。采用Waters ACQUITY UPLC?BEH C18色谱柱，以0.1%甲酸水（内含5 mmol/L乙酸铵）溶液与甲醇为流动相梯度洗脱分离目标物，克伦特罗、沙丁胺醇采用内标法定量，莱克多巴胺采用外标法定量。克伦特罗、沙丁胺醇、莱克多巴胺检出限为0.1μg/kg。在牛羊肉中添加3种瘦肉精混合标准中间液，平均回收率为65.3%～105.8%，相对标准偏差为0.95%～9.65%(n=6)，线性范围为0.1～4ng/mL。该方法可以更加简便、快捷、准确地测定牛羊肉中的克伦特罗、沙丁胺醇、莱克多巴胺。     

基于固态盐酸莱克多巴胺电化学传感器测定猪尿中盐酸莱克多巴胺

盐酸莱克多巴胺是人工合成的β2-肾上腺素兴奋剂,它可加快畜禽生长速度,降低酮体脂肪含量,提高瘦肉率,俗称"瘦肉精"。由于盐酸莱克多巴胺存在组织残留问题,对人体健康产生不利影响,我国相关部门已明文禁止莱克多巴胺用于动物养殖。目前国内有关动物组织中莱克多巴胺的检测方法主要     

莱克多巴胺荧光胶乳颗粒免疫层析检测法的建立

基于免疫竞争层析法原理,建立了莱克多巴胺(RAC)的荧光胶乳颗粒免疫层析快速检测技术,用于猪肉组织中莱克多巴胺残留的检测.应用自制的抗RAC单抗,标记己胶乳荧光颗粒,将标记好的复合物喷涂于结合垫上.羊抗鼠IgG与人工合成的RAC - BSA检测抗原包被在NC膜表面,分别作为质控线(C线)与检测线(T线).检测过程中RA...     

应用表面增强拉曼光谱技术快速检测尿样中的β-兴奋剂

应用表面增强拉曼光谱技术与化学计量法相结合分析克伦特罗、沙丁胺醇和莱克多巴胺3种β-兴奋剂的标准溶液.在取自10头猪的尿样中,分别添加5个不同浓度的莱克多巴胺(1～20 mg/L),采用快速的液液萃取法对样品进行前处理,再进行表面增强拉曼测试.结果表明,克伦特罗和沙丁胺醇标准溶液的最低检测浓度为2 μg/L,莱克多巴胺标准溶液的最低检测浓度为0.1 mg/L;通过偏最小二乘法建立模型进行定量分析,3种药物的实际值与预测值的相关系数(R2)为0.9134～0.9368;本方法可检测尿样中1 mg/L莱克多巴胺,经外部验证后模型的实际值与预测值的相关系数(R2)为0 881,相对分析误差(RPD)为2.83;分析尿液中的莱克多巴胺含量所需时间小于30 min,为快速检测莱克多巴胺提供新途径.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.