运用功能化修饰的碳纳米管针尖测量配体-受体的作用力

电弧法自制碳纳米管原子力显微镜针尖,对其末端进行功能化修饰,然后测量配体-受体之间的作用力。运用没有功能化修饰的碳纳米管针尖与修饰有亲和素分子的基底进行接触测量时,没有粘滞力出现;而运用末端修饰生物素分子的碳纳米管针尖测量时,有粘滞力产生。功能化的碳纳米管针尖直接测得的粘滞力均大约200pN,此值符合一对配体生物素和受体亲和素之间的作用力。这一结果很难用传统的针尖获得,功能化修饰的碳纳米管针尖能够克服传统针尖在力测量中的局限,在生物学和化学领域有着广泛的应用前景。     

Molecular dynamics assessment of doxorubicin–carbon nanotubes molecular interactions for the design of drug delivery systems

Carbon nanotubes (CNTs) constitute an interesting material for nanomedicine applications because of their unique properties, especially their ability to penetrate membranes, to transport drugs specifically and to be easily functionalized. In this work, the energies of the intermolecular interactions of single-walled CNTs and the anticancer drug doxorubicin (DOX) were determined using the AMBER 12 molecular dynamics MM/PBSA and MM/GBSA methods with the aim of better understanding how the structural parameters of the nanotube can improve the interactions with the drug and to determine which structural parameters are more important for increasing the stability of the complexes formed between the CNTs and DOX. The armchair, zigzag, and chiral nanotubes were finite hydrogen-terminated open tubes, and the DOX was encapsulated inside the tube or adsorbed on the nanotube surface. Pentagon/heptagon bumpy defects and polyethylene glycol (PEG) nanotube functionalization were also studied. The best interaction occurred when the drug was located inside the cavity of the nanotube. Armchair and zigzag nanotubes doped with nitrogen, favored interaction with the drug, whereas chiral nanotubes exhibited better drug interactions when having bumpy defects. The π-π stacking and N-H…π electrostatic interactions were important components of the attractive drug-nanotube forces, enabling significant flattening of the nanotube to favor a dual strong interaction with the encapsulated drug, with DOX–CNT equilibrium distances of 3.1–3.9 Å. These results can contribute to the modeling of new drug-nanotube delivery systems.

     

Effect of chirality and length on the penetrability of single-walled carbon nanotubes into lipid bilayer cell membranes

The ability of carbon nanotubes to enter the cell membrane acting as drug-delivery vehicles has yielded a plethora of experimental investigations, mostly with inconclusive results because of the wide spectra of carbon nanotube structures. Because of the virtual impossibility of synthesizing CNTs with distinct chirality, we report a parametric study on the use of molecular dynamics to provide better insight into the effect of the carbon nanotube chirality and the aspect ratio on the interaction with a lipid bilayer membrane. The simulation results indicated that a single-walled carbon nanotube utilizes different time-evolving mechanisms to facilitate their internalization within the membrane. These mechanisms comprise both penetration and endocytosis. It was observed that carbon nanotubes with higher aspect ratios penetrate the membrane faster whereas shorter nanotubes undergo significant rotation during the final stages of endocytosis. Furthermore, nanotubes with lower chiral indices developed significant adhesion with the membrane. This adhesion is hypothesized to consume some of the carbon nanotube energy, thus resulting in longer times for the nanotube to translocate through the membrane.     

Direct measurements of the interaction between pyrene and graphite in aqueous media by single molecule force spectroscopy: understanding the pi-pi interactions

Pyrene derivatives can absorb onto the surface of carbon nanotubes and graphite particles through pi-pi interactions to functionalize these inorganic building blocks with organic surface moieties. Using single molecule force spectroscopy, we have demonstrated the first direct measurement of the interaction between pyrene and a graphite surface. In particular, we have connected a pyrene molecule onto an AFM tip via a flexible poly(ethylene glycol) (PEG) chain to ensure the formation of a molecular bridge. The pi-pi interaction between pyrene and graphite is thus indicated to be approximately 55 pN with no hysteresis between the desorption and adhesion forces.     

Doxorubicin Encapsulation in Carbon Nanotubes Having Haeckelite or Stone–Wales Defects as Drug Carriers: A Molecular Dynamics Approach

Doxorubicin (DOX), a recognized anticancer drug, forms stable associations with carbon nanotubes (CNTs). CNTs when properly functionalized have the ability to anchor directly in cancerous tumors where the release of the drug occurs thanks to the tumor slightly acidic pH. Herein, we study the armchair and zigzag CNTs with Stone–Wales (SW) defects to rank their ability to encapsulate DOX by determining the DOX-CNT binding free energies using the MM/PBSA and MM/GBSA methods implemented in AMBER16. We investigate also the chiral CNTs with haeckelite defects. Each haeckelite defect consists of a pair of square and octagonal rings. The armchair and zigzag CNT with SW defects and chiral nanotubes with haeckelite defects predict DOX-CNT interactions that depend on the length of the nanotube, the number of present defects and nitrogen doping. Chiral nanotubes having two haeckelite defects reveal a clear dependence on the nitrogen content with DOX-CNT interaction forces decreasing in the order 0N > 4N > 8N. These results contribute to a further understanding of drug-nanotube interactions and to the design of new drug delivery systems based on CNTs.     

The influence of ionic strength, nutrients and pH on bacterial adhesion to metals

Bacteria-metal interactions in aqueous solutions are important in biofilm formation, biofouling and biocorrosion problems in the natural environment and engineered systems. In this study, the adhesion forces of two anaerobes (Desulfovibrio desulfuricans and Desulfovibrio singaporenus) and an aerobe (Pseudomonas sp.) to stainless steel 316 in various aqueous systems were quantified using atomic force microscopy (AFM) with a cell probe. Results show that the nutrient and ionic strength of the solutions influence the bacteria-metal interactions. The bacteria-metal adhesion force was reduced in the presence of the nutrients in the solution, because a trace organic film was formed and thus decreased the metal surface wettability. Stronger ionic strength in the solution results in a larger bacteria-metal adhesion force, which is due to the stronger electrostatic attraction force between the positively charged metal surface and negatively charged bacterial surface. Solution pH also influences the interaction between the bacterial cells and the metal surface; the bacteria-metal adhesion force reached its highest value when the pH of the solution was near the isoelectric point of the bacteria, i.e. at the zero point charge. The adhesion forces at pH 9 were higher than at pH 7 due to the increase in the attraction between Fe ions and negative carboxylate groups.     

Chemically grafting carbon nanotubes onto carbon fibers for enhancing interfacial strength in carbon fiber/HDPE composites

We propose a novel method to uniformly graft high‐density carbon nanotubes (CNTs) onto carbon fiber (CF) by using coupling agents. Coupling agents can supply much more active groups, which is beneficial for grafting high‐density CNTs onto CF surface. After CNT grafting treatment, there are still substantial amounts of reactive groups, which can further react with various types of molecules to meet different requirements. To create chemical bonding between CF and high‐density polyethylene, CF‐CNT was further grafted get reinforcement. The interfacial adhesion of the resulting composites showed a dramatic improvement.     

Introduction of Multiple Hydrogen Bonding for Enhanced Mechanical Performance of Polymer-Carbon Nanotube Composites

Due to their outstanding mechanical properties and high aspect ratios, carbon nanotubes (CNTs) are envisioned as attractive nanofillers in polymer composites. However, due to strong van der Waals interactions, deleterious aggregation of CNTs is typically observed in polymer nanocomposites. Moreover, due to low stress transfer between the matrix polymer and the nanotube filler, only limited reinforcement is obtained. We report here a novel functionalization strategy to obtain CNTs with pendant self-complementary hydrogen bonding groups in order to address these limitations. Multi-walled CNTs were functionalized with ureidopyrimidinone (UPy) groups, which display multiple hydrogen bonding. The functionalized CNTs were blended with acrylic copolymers containing pendant UPy moieties and significant enhancement in tensile performance of the nanocomposites was observed.     

碳纳米管膜分离Li+/Mg2+的分子动力学模拟

采用"扶手椅"型碳纳米管建立了连续的碳纳米管膜模型,利用分子动力学模拟方法研究了Li+和Mg2+在膜中的传导行为.模拟研究了不同管径的碳纳米管CNTs(7,7),(8,8),(9,9),(10,10),(11,11)对Li+和Mg2+的通透性,检测了两种离子进入管内时的平均力势,探索了两种离子在碳纳米管内的径向、轴向密度分布,观测了个别离子在管内的运动轨迹.结果表明,模拟中CNTs(9,9)用于有效分离Li+和Mg2+的效果较好.管径不同,导致Li+和Mg2+通量不同,平均力势(PMF)差值不同,同时离子的轨迹和径向、轴向密度分布也有所差异.总之,碳纳米管是一种可将Li+和Mg2+分离的潜在材料.     

Facile approach to obtain individual‐nanotube dispersion at high loading in carbon nanotubes/polyimide composites

A big challenge in making a composite lies in achieving individual‐nanotube dispersion of carbon nanotubes (CNTs) in a polymer matrix, without aggregation and entanglement and excellent interfacial adhesion between the CNTs and the polymers matrix. In this communication, using polyethylene glycol‐200, we successfully prepared CNT‐reinforced polyimide composites that exhibit individual‐nanotube dispertion in the matrix at high‐loading CNT's. The content of CNTs in a composite can reach 43 wt%. Copyright © 2007 John Wiley & Sons, Ltd.     

Interactions between single-walled carbon nanotubes and lysozyme

Dispersions of single-walled and non-associated carbon nanotubes in aqueous lysozyme solution were investigated by analyzing the stabilizing effect of both protein concentration and pH. It was inferred that the medium pH, which significantly modifies the protein net charge and (presumably) conformation, modulates the mutual interactions with carbon nanotubes. At fixed pH, in addition, the formation of protein/nanotube complexes scales with increasing lysozyme concentration. Electrophoretic mobility, dielectric relaxation and circular dichroism were used to determine the above features. According to circular dichroism, lysozyme adsorbed onto nanotubes could essentially retain its native conformation, but the significant amount of free protein does not allow drawing definitive conclusions on this regard. The state of charge and charge distribution around nanotubes was inferred by combining electrophoretic mobility and dielectric relaxation methods. The former gives information on changes in the surface charge density of the complexes, the latter on modifications in the electrical double layer thickness around them. Such results are complementary each other and univocally indicate that some LYS molecules take part to binding. Above a critical protein/nanotube mass ratio, depletion phenomena were observed. They counteract the stabilization mechanism, with subsequent nanotube/nanotube aggregation and phase separation. Protein-based depletion phenomena are similar to formerly reported effects, observed in aqueous surfactant systems containing carbon nanotubes.     

Study of ionic surfactants interactions with carboxylated single-walled carbon nanotubes by using ion-selective electrodes

Potentiometric measurements based on the use of ion-selective electrodes have been used to study the interaction (adsorption) of anionic and cationic surfactants with functionalized single-walled carbon nanotubes (SWCNT–COOH). According to results, the interaction is driven by hydrophobic forces between the hydrocarbon tails of the surfactants and the nanotube walls. Electrostatic interactions practically exert no influence on the interaction. Driving forces in the dispersion processes are different.     

Triazine‐Carbon Nanotubes: New Platforms for the Design of Flavin Receptors

The synthesis of functionalised carbon nanotubes as receptors for riboflavin (RBF) is reported. Carbon nanotubes, both single‐walled and multi‐walled, have been functionalised with 1,3,5‐triazines and p‐tolyl chains by aryl radical addition under microwave irradiation and the derivatives have been fully characterised by using a range of techniques. The interactions between riboflavin and the hybrids were analysed by using fluorescence and UV/Vis spectroscopic techniques. The results show that the attached functional groups minimise the π‐π stacking interactions between riboflavin and the nanotube walls. Comparison of p‐tolyl groups with the triazine groups shows that the latter have stronger interactions with riboflavin because of the presence of hydrogen bonds. Moreover, the triazine derivatives follow the Stern–Volmer relationship and show a high association constant with riboflavin. In this way, artificial receptors in catalytic processes could be designed through specific control of the interaction between functionalised carbon nanotubes and riboflavin.     

碳纳米管原子力显微镜针尖在结构生物学研究中的应用

碳纳米管以其较小的半径、较高的纵横比和高的柔韧性成为原子力显微镜对结构生物学进行研究的理想针尖。新的制备方法获得了亚纳米级半径的碳纳米管针尖,运用它们得到了生物大分子及其复合物的生物结构,并获得了新的生物信息,这用传统的原子力显微镜针尖是无法实现的。     

Nanotubes as polymer composite reinforcing additive materials – A comparative study

Nitrogen-doped bamboo-shaped carbon nanotubes (N-BCNTs) and their non-doped conventional counterparts, multiwalled carbon nanotubes (MWCNTs) were compared as polymer reinforcing additives in polyvinyl chloride (PVC) matrix. The nanotubes were synthetized by catalytic chemical vapor deposition (CCVD) method. The purity of both nanotubes was measured by thermogravimetric analysis (TGA) and found to be >91%. Further analysis on the morphology and size of the carbon nanotubes (CNTs) were performed by transmission electron microscopy (TEM). The PVC powder was impregnated with CNTs in ethanol by using tip ultrasonicator. The dispersion media was evaporated, and the CNT/PVC powder was used to produce polymer fibers. The orientation of carbon nanotubes in the PVC matrix was characterized by scanning electron microscopy (SEM), and the presence of nanotubes were confirmed in case of all PVC samples. It can be observed on the SEM images that the nanotubes are fully covered with PVC. The tensile strength of the nanotube containing samples was tested and the N-BCNT/PVC composite was found to be better in this sense, thanks to the extraordinary structure of the nanotube. In case of the N-BCNT/PVC composite the measured young modulus was 39.7% higher, while the elongation at brake decreased by 33.6% compare to the MWCNT/PVC composite. These significant differences in the mechanical properties of the composites can be explained with the stronger interaction between N-BCNTs and PVC.     

Multiwalled carbon nanotubes with chemically grafted polyetherimides

Covalent attachment of a non-fluorinated polyetherimide onto the surface of carboxylic acid-functionalized multiwalled carbon nanotubes (MWNTs) has been achieved via grafting reactions. This confirms for the first time that the grafting reaction occurs at the nanotube surface when the carboxylic acid-functionalized MWNTs react with the polyetherimide with amine-terminated groups, through both amide and imide linkages formed at the interface between the carbon nanotubes and the polyetherimide. Additionally, an increase in the average molecular weight is detected in gel permeation chromatography when the polyetherimide is chemically attached onto the nanotubes. More interestingly, the chemical bonding at the interface provides much better interfacial adhesion and mechanical stress transfer, evidenced by a significant improvement in mechanical properties. As a result of the chemical attachment, the carbon nanotube-reinforced polyetherimide composite films have enhanced electrical conductivity, thermal deformation temperatures, and mechanical properties.     

Reversible positioning at submicrometre scale of carbon nanotubes mediated by pH-sensitive poly(amino-methacrylate) patterns

The selective adsorption of carbon nanotubes (CNTs) on a pH-reversible PDMAEMA patterned gold surface is presented. In acidic conditions, a selective CNTs adsorption onto the polymer brushes is obtained due to ammonium-π interactions. The reversible behavior was shown by successive treatments in both alkaline and acidic solutions with CNTs.     

Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors

Carbon nanotubes (CNTs) constitute a class of nanomaterials that possess characteristics suitable for a variety of possible applications. Their compatibility with aqueous environments has been made possible by the chemical functionalization of their surface, allowing for exploration of their interactions with biological components including mammalian cells. Functionalized CNTs (f-CNTs) are being intensively explored in advanced biotechnological applications ranging from molecular biosensors to cellular growth substrates. We have been exploring the potential of f-CNTs as delivery vehicles of biologically active molecules in view of possible biomedical applications, including vaccination and gene delivery. Recently we reported the capability of ammonium-functionalized single-walled CNTs to penetrate human and murine cells and facilitate the delivery of plasmid DNA leading to expression of marker genes. To optimize f-CNTs as gene delivery vehicles, it is essential to characterize their interactions with DNA. In the present report, we study the interactions of three types of f-CNTs, ammonium-functionalized single-walled and multiwalled carbon nanotubes (SWNT-NH3+; MWNT-NH3+), and lysine-functionalized single-walled carbon nanotubes (SWNT-Lys-NH3+), with plasmid DNA. Nanotube-DNA complexes were analyzed by scanning electron microscopy, surface plasmon resonance, PicoGreen dye exclusion, and agarose gel shift assay. The results indicate that all three types of cationic carbon nanotubes are able to condense DNA to varying degrees, indicating that both nanotube surface area and charge density are critical parameters that determine the interaction and electrostatic complex formation between f-CNTs with DNA. All three different f-CNT types in this study exhibited upregulation of marker gene expression over naked DNA using a mammalian (human) cell line. Differences in the levels of gene expression were correlated with the structural and biophysical data obtained for the f-CNT:DNA complexes to suggest that large surface area leading to very efficient DNA condensation is not necessary for effective gene transfer. However, it will require further investigation to determine whether the degree of binding and tight association between DNA and nanotubes is a desirable trait to increase gene expression efficiency in vitro or in vivo. This study constitutes the first thorough investigation into the physicochemical interactions between cationic functionalized carbon nanotubes and DNA toward construction of carbon nanotube-based gene transfer vector systems.     

Spectroscopic evidence for pi-pi interaction between poly(diallyl dimethylammonium) chloride and multiwalled carbon nanotubes

The interaction between multiwalled carbon nanotubes (MWCNTs) and aqueous poly(diallyl dimethylammonium) chloride (PDDA) was studied by X-ray photoelectron (XPS) and photoacoustic Fourier transform infrared (PA-FTIR) spectroscopies. We have found that the mild sonication of MWCNTs in aqueous PDDA results in a significant improvement of CNT dispersibility and greatly enhances their adhesion to Au and Si substrates. The MWCNT-PDDA interaction is due to the presence of an unsaturated contaminant in the PDDA chain, as confirmed by both XPS and PA-FTIR, which enters into a pi-pi interaction with the CNTs. Electrostatic group repulsions of the coated CNTs then provide the dispersibility and adhesion.