Development of a broad selective molecularly imprinted polymers-based solid phase extraction of contraceptive drug levonorgestrel from water samples

A broad selective molecularly imprinted polymers-based solid phase extraction (MISPE) for levonorgestrel (LNG) from water samples was developed. Using LNG as a template molecule, acrylamide (AA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as linking agent and bulk polymerisation as a synthetic method, the molecularly imprinted polymers (MIPs) were synthesised and characterised. The MIPs displayed a high specific rebinding for LNG with the imprinting factor of 3.71. The Scatchard analysis showed that there was at least one class of binding site for LNG formed in the MIPs with the dissociation constant of 8.046?µg?mL^?1. The results of selectivity testing indicated that the MIPs also exhibited high cross-reactivity with structurally related compounds (estrone, methylprednisolone and ethinyl estradiol), but no recognition with non-structurally related compound (indomethacin), suggesting that the MIPs could be used as a broad recognition absorbent. MISPE column was prepared by packing MIPs particles into a common SPE cartridge. The MISPE extraction conditions including loading, washing and eluting solutions were carefully optimised. Water samples spiked with LNG were extracted by MISPE column and detected by high-performance liquid chromatography. The recoveries were found to be 79.97?～?132.79% with relative standard deviations (RSD) of 1.92?～?10.43%, indicating the feasibility of the prepared MIPs for LNG extraction.     

Chromatographic evaluation of polymers imprinted with analogs of chloramphenicol and application to selective solid-phase extraction

To obtain a highly selective material for the antibiotic chloramphenicol, which has several harmful side effects in humans, different molecularly imprinted polymers (MIPs) were prepared. In order to avoid a major traditional drawback associated with MIPs of residual template bleeding, molecules that are structurally related to chloramphenicol were used as templates for polymer synthesis. Chromatographic evaluation indicated that the employed template imparted a significant influence on the recognition properties of the corresponding polymer. A strong retention of chloramphenicol under nonpolar elution conditions (k = 68.03, IF = 17.72) and under aqueous elution conditions (k = 92.44, IF = 1.35) was achieved. After chromatographic evaluation, the MIP was utilized as the recognition sorbent in a solid-phase extraction to determine chloramphenicol using either an organic or aqueous washing solvent. Recoveries of nearly 100% from the chloramphenicol standard solution and nearly 90% from honey samples spiked with chloramphenicol were attained. Furthermore, the applicability of the MIP for sample cleanup was demonstrated.     

Molecularly Imprinted Polymers as Specific Adsorbents for Zearalenone Produced by Precipitation Polymerization and Applied to Mycotoxin Production

In this work, molecularly imprinted polymers (MIPs) using the mycotoxin zearalenone (ZEA) as template were first synthesized via precipitation polymerization and then applied as specific adsorbents in molecularly imprinted solid-phase extraction (MISPE) cartridges. The MISPE procedure was optimized with 3 mL of acetonitrile for preconditioning, 1 mL of acetonitrile:H₂O (60:40) for loading, 1 mL of acetonitrile:H₂O (30:70), and 3 mL of methanol:acetic acid (95:5) for elution. The obtained MIPs showed high selectivity of 96.9% towards ZEA, and low cross-reactivity (1-20%) to other Fusarium mycotoxins including deoxynivalenol, nivalenol, HT-2 toxin and T-2 toxin. The cross-reactivity to fumonisin B₁ amounted to 61%. The MISPE was applied for enrichment of ZEA, which was produced by Fusarium graminearum strains. An enrichment factor above 50 was reached. Recoveries of 1 µg/mL were between 90.8% and 99.6%. A small amount of ZEA was produced by 9 F. graminearum strains with a maximum of 13 µg, then purified by the developed MISPE and analyzed by LC-MS/MS.     

Newly Combined Method of Molecularly Imprinted Solid-Phase Extraction with ELISA for Rapid Detection of Clenbuterol in Animal-Tissue Samples

Abstract

A new method using molecularly imprinted polymers (MIPs) as specific adsorbent materials coupled with ELISA analysis is being reported for the first time for the detection of clenbuterol (CLB) residue in the pig muscles. After optimization of the posttreatments, the total amount of template bleeding in the CLB MIPs was decreased to only 3.0 ng CLB/60 mg MIPs, which is 10 times lower than that of the previous report. Moreover, compared to the methods of C18-ELISA and single ELISA, the combined molecularly imprinted solid-phase extraction (MISPE)–ELISA exhibited high precision and robust accuracy for CLB at all three spiked levels of 0.5, 5.0, and 10.0 ng g^?1.     

Electrospun Nanofibers Sorbents for Pre-Concentration of 1,1-dichloro-2,2 bis-(4-chlorophenyl)ethylene with Subsequent Desorption by Pressurized Hot Water Extraction

Electrospun polystyrene (PS) nanofibers (130–500 nm) incorporating a potassium salt of imidazole-1-carbodithioate were evaluated as potential sorbents for the pre-concentration of a model organochlorine pesticide; 1,1-dichloro-2,2bis-(4-chlorophenyl)ethylene (DDE). The efficiencies of DDE (0.25–1.0 μg L^?1) adsorption by the nanofiber sorbent followed by desorption employing pressurized hot water extraction (PHWE) were investigated and monitored using gas chromatography with electron capture detection (GC-ECD). Parameters such as time, temperature and pressure of extraction, sample volume, DDE concentration and sorbent mass were optimized. The maximum adsorption of DDE (0.50 μg L^?1) on electrospun PS and carbodithioate incorporated PS nanofibers was at 43.7 and 94.6%, respectively, in 20 min. Incorporation of carbodithiote doubled the adsorption efficiency of PS and achieved LOD of 0.000234 μg L^?1 for DDE. The optimal DDE desorption on the PHWE system was 93.8% in 10 min. It would seem that the use of electrospun nanofibers as sorbent material with subsequent desorption by PHWE has great potential and thus warrants further investigations. This approach as it uses water as an extraction solvent for an organochlorine pesticide provides an opportunity to eliminate organic solvents, especially for procedures aimed at monitoring organic pollutants in the environment.     

Molecularly imprinted polymer for solid-phase extraction of rutin in complicated traditional Chinese medicines

In the present work, an improved and direct approach for the preparation of molecularly imprinted polymers (MIPs) was proposed. The MIPs were prepared based on bulk polymerization by water-bath heating and ultrasonic elution of the template, using rutin as the template, acrylamide (AM) as the functional monomer and 2,2'-azobisisobutyronitrile (AIBN) as the cross linker. Molecularly imprinted polymers prepared by other elution methods, including microwave-assisted extraction and conventional Soxhlet extraction, were used for comparison and the results showed that the ultrasonic elution method is the best. The synthesized MIPs were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). High performance liquid chromatography (HPLC) was used to evaluate the adsorption properties and recognition mechanism of the MIPs. Structurally similar compounds including quercetin and genistein were utilized for verifying the molecular selectivity and characterizing the recognition capability of the MIPs. The MIPs were used as a sorbent for the solid phase extraction of rutin, and the resultant cartridge showed a good extraction performance. Thus, a molecularly imprinted solid-phase extraction (MISPE) procedure for selective pre-concentration of rutin from complicated traditional Chinese medicine (TCM) samples was proposed. Various elution parameters that affect the adsorption capacity of the polymer were evaluated to optimize the selective pre-concentration of rutin. The characteristics of the MISPE method were validated by HPLC. The recoveries ranged from 85% to 91% for TCMs, which demonstrated that this MISPE-HPLC method could be applied to pre-concentrate and determinate rutin directly from complicated TCM samples in the presence of other interfering substances.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

A Pretreatment Method for GC–MS Determination of Endocrine Disrupting Chemicals in Mollusk Tissues

Automatic soxhlet extraction followed by silica gel cartridge cleanup process was developed as a pretreatment method for GC–MS determination of seven endocrine disrupting chemicals in mollusk tissues. Operation parameters including extraction time, adsorption flow rate and elution flow rate were optimized as 140 min, 2 mL min^?1 and 2 mL min^?1, respectively. Thirty percent dichloromethane in n-hexane and 70% dichloromethane in n-hexane were used as elution solvents in turn. Recovery rates were 93.7, 91.7, 84.5, 83.3, 88.4, 81.2, and 79.7% for nonylphenols (NPs), bisphenol A (BPA), 17α-ethynylestradiol (EE2), estrone (E1), 17α-estradiol (17α-E2), 17β-estradiol (E2), and estriol (E3), respectively. Acceptable relative standard derivations ranged from 8.5 to 12.1%. Method detection limits ranged from 0.27 to 0.68 ng g^?1 dry weight (dw), and quantitative detection limits ranged from 0.62 to 1.26 ng g^?1 dw. The method was successfully applied to five mollusk species in Dapeng Bay of China to verify its practicability, and NPs, BPA, EE2, E1 and 17α-E2 were detected in the range from 1.6 to 131.5 ng g^?1 dw.     

Determination of pyrrolizidine alkaloids in comfrey by liquid chromatography-electrospray ionization mass spectrometry

Symphytum officinale L. (comfrey) is a medicinal plant commonly used in decoctions and aliments. Besides therapeutic bioactive compounds present in the herb, it is found to contain hepatotoxic pyrrolizidine alkaloids (PAs), such as lycopsamine and others. In the present study, PAs such as lycopsamine, echimidine and lasiocarpine were determined using electrospray liquid chromatography-mass spectrometry (LC-MS) with the method precision (relative standard deviation, RSD) <10%. Detection of lycopsamine, symviridine and their N-oxides could be confirmed with a newly developed method based on HPLC ion-trap and orbitrap MS with electrospray ionization interface. With LC-MS, quantitative analysis of lycopsamine in the botanical extract was carried out. The effect of extraction solvent was optimized by sonication and methanol: H₂O (50:50) was selected. Then a rapid method based on pressurized hot water extraction (PHWE) was employed for the extraction of lycopsamine from comfrey followed by the comparison with heating under reflux with the RSD ranging from 2.49% to 19.32%. Our results showed a higher extraction efficiency for heating under reflux compared with PHWE. It was proposed that the lower extraction efficiency for PHWE was attributable to dissolved nitrogen from air which caused the reduction in the solubility of lycopsamine in the compressed hot solvent. In this study, quantitative analysis of PAs in comfrey was demonstrated. In addition, it was found that the use of subcritical water for extractions depended on the physical properties of the dissolved solutes and their tendency to degrade under the chosen extraction conditions.     

Influence of salt ions on binding to molecularly imprinted polymers

Salt ions were found to have an influence on template binding to two model molecularly imprinted polymers (MIPs), targeted to penicillin G and propranolol, respectively, in water–acetonitrile mixtures. Water was detrimental to rebinding of penicillin G whereas propranolol bound in the entire water–acetonitrile range tested. In 100% aqueous solution, 3-M salt solutions augmented the binding of both templates. The effects followed the Hofmeister series with kosmotropic ions promoting the largest increase. Binding was mainly of a non-specific nature under these conditions. In acetonitrile containing low amounts of water, the specific binding to the MIPs increased with the addition of salts. Binding of penicillin G followed the Hofmeister series while an ion-exchange mechanism was observed for propranolol. The results suggest that hydration of kosmotropic ions reduces the water activity in water-poor media providing a stabilizing effect on water-sensitive MIP–template interactions. The effects were utilized to develop a procedure for molecularly imprinted solid-phase extraction (MISPE) of penicillin G from milk with a recovery of 87%.     

Pressurised hot water extraction in continuous flow mode for thermolabile compounds: extraction of polyphenols in red onions

Extraction and analysis of labile compounds in complex sample matrices, such as plants, is often a big analytical challenge. In this work, the use of a “green and clean” pressurised hot water extraction (PHWE) approach performed in continuous flow mode is explored. Experimental data for extraction and degradation kinetics of selected compounds were utilised to develop a continuous flow extraction (CFE) method targeting thermolabile polyphenols in red onions, with detection by high-performance liquid chromatography (HPLC)–diode array detection (DAD)–mass spectrometry (MS). Water containing ethanol and formic acid was used as extraction solvent. Method performance was focused on extraction yield with minimal analyte degradation. By adjusting the flow rate of the extraction solvent, degradation effects were minimised, and complete extraction could be achieved within 60 min. The CFE extraction yields of the polyphenols investigated were 80–90 % of the theoretically calculated quantitative yields and were significantly higher than the yields obtained by conventional methanol extraction and static batch extraction (70–79 and 58–67 % of the theoretical yields, respectively). The precision of the developed method was lower than 8 % expressed as relative standard deviation.

加速溶剂萃取快速洗脱印迹聚合物中的模板分子

通过优化实验条件,选择洗脱温度80℃、加热时间5min、萃取压力10.4MPa、洗脱溶剂为300mL的甲醇/乙酸(90∶10,V/V),静态萃取时间8min、吹扫时间100s,对1.000g尼古丁印迹聚合物中的模板分子进行连续6次的萃取洗脱,洗脱效率达94.2%,模板渗漏量仅为9.8μg/L,萃取时间<70min。将2000mg洗脱后的印迹聚合物颗粒装填于3mL的聚丙烯固相萃取小柱中,用10mL甲醇/乙酸(90∶1,V/V)淋洗小柱,用高效液相色谱检测淋洗液中的尼古丁,获得模板的渗漏量为9.8μg/L。     

Isolation of flavonoids from aspen knotwood by pressurized hot water extraction and comparison with other extraction techniques

Pressurized hot water extraction (PHWE) conditions (time, temperature, pressure) were optimized for the extraction of naringenin and other major flavonoids (dihydrokaempferol, naringin) from knotwood of aspen. Extracts were analysed by GC-FID, GC-MS, HPLC-UV and HPLC-MS. The results were compared with those obtained by Soxhlet, ultrasonic extraction and reflux in methanol. Flavonoids were most efficiently extracted with PHWE at 150 °C and 220 bar with 35 min extraction time. Soxhlet with methanol gave slightly higher recoveries, but an extraction time of 48 h was required. Naringenin concentration was highest in knotwood (1.15% dry weight) and much lower in the sapwood. PHWE proved to be cheap, fast and effective for the isolation of biofunctional flavonoids from aspen knotwood, producing higher recoveries than 24 h Soxhlet extraction, sonication or 24 h reflux.     

Synthesis and Evaluation of a Molecularly Imprinted Polymer for Pre-concentration of Patulin from Apple Juice

Patulin, (4-hydroxy-4H-furo[3,2-c] pyran-2(6H)-one) is a toxic secondary metabolite produced by a wide range of fungal species growing on some fruits, including apples. A novel molecularly imprinted polymer (MIP) for patulin has been synthesized using oxindole as a dummy template. The synthesis of MIPs based on dummy templates is a solution to overcome “template bleeding” shortcoming in trace analysis. The polymer was prepared in a non-covalent approach with methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linker via free radical polymerization. It was revealed that the MIP particles in extraction columns displayed high affinity towards patulin and, therefore, subsequently employed for molecularly imprinted-solid phase extraction (MIP-SPE) of patulin from contaminated apple juice samples. The analysis of spiked samples showed good recoveries (>80%). Reproducibility, repeatability, and limit of detection of the proposed method were also investigated.     

GC-MS法测定ABS木塑材料中十溴二苯醚

建立了索氏提取和超声萃取-GC-MS法测定丙烯腈-丁二烯-苯乙烯共聚物(ABS)木塑材料中十溴二苯醚的分析方法。通过正交试验分析提取溶剂、样品质量和提取时间三个因素的显著性,并优化了参数。在优化条件下,索氏提取和超声萃取法的平均回收率均大于80%,精密度均小于10%。经F检验和T检验显著性统计,两种前处理方法的精密度和准确度不存在差异。相对于传统的索氏提取法,超声萃取法具有操作简单、溶剂用量少和省时的特点,可以较好的应用于木塑材料中十溴二苯醚检测。     

Simultaneous Determination of Trace Benzene and Toluene in Beverage by Ultrasound-Enhanced Hollow-Fiber Liquid-Phase Microextraction Coupled with GC

This study describes an ultrasound-accelerated hollow-fiber liquid-phase microextraction (U-HF-LPME) method for the simultaneous trace analysis of benzene and toluene in beverages. Sample preparation was followed by analysis using gas chromatography–flame ionization detection. Experimental parameters such as extraction solvent, extraction time, ultrasonic power and frequency, extractant volume and ionic strength of the sample were assessed and optimized. Finally, the enrichment factor (EF), limit of quantitation (LOQ) and precision of the method for benzene and toluene were evaluated. The relative standard deviations (RSD, n = 5) were found to be 0.11 and 1.07% with good relative recovery of 98.2 and 99.6%, respectively. High EF of 105 and 308, and LOQ of 0.34 and 0.18 μg L^?1 were obtained within 10 min. The results demonstrated that the proposed method was suitable for trace analysis of beverage samples.     

Extraction and preconcentration of 17α-ethynylestradiol as an endocrine-disrupting agent from environmental water samples by a modified magnetic nanosorbent

A rapid, simple and efficient procedure is demonstrated for extraction and determination of an endocrine-disrupting compound, synthetic estrogen, 17α-ethynylestradiol (EE2), in water and wastewater samples via magnetic solid-phase extraction followed by high-performance liquid chromatography coupled with UV detection. The analytical method is based on extraction of EE2 by dispersing magnetic nanoparticles in sample solution for a desired time and then eluting the analytes with an appropriate solvent. The nanoparticles were modified with a hydrophobic material by self-assembling an organosulfur compound (bis-(2,4,4-trimethylpentyl)-dithiophosphinic acid) onto the silver-coated Fe₃O₄ nanoparticles as sorbent. The effects of several parameters, such as amount of sorbent, sample volume, extraction time, ionic strength and desorption conditions, were examined to obtain better efficiency. The optimized methodology exhibited a good linearity between 0.5 and 100 μg L^?1 with a limit of detection (LOD) of 0.3 μg L^?1, and a preconcentration factor of 245 with intra- and inter-day precisions (relative standard deviations) 2.4 and 3.2 %, respectively. The developed method was successfully applied for extraction and determination of EE2 in different real water samples including river water, surface water and influent and effluent of a wastewater treatment plant, and satisfactory results were achieved. The method, which provides a good preconcentration factor, a low LOD and low consumption of the organic solvent, presents a rapid, simple and efficient procedure for determining EE2 in aqueous samples.     

Synthesis of molecularly imprinted polymers via ring-opening metathesis polymerization for solid-phase extraction of bisphenol A

The use of molecularly imprinted polymers (MIPs) prepared by ring-opening metathesis polymerization (ROMP) for bisphenol A (BPA) was reported in this article. The resulting MIPs have high imprinting and adsorption capacities, and can be used for separation and determination of BPA in environmental water samples. The successful application of ROMP in the molecular imprinting field is described here. For the first time, two cross-linkers (dicyclopentadiene and 2,5-norbornadiene) and two Grubbs catalysts (first and second generation) were investigated to compare their effects on the binding performance of MIPs. The ROMP technique is able to create the imprinted polymers within 1 h under mild conditions. Furthermore, it can provide MIPs with obvious imprinting effects towards the template, very fast template rebinding kinetics, high binding capacity and appreciable selectivity over structurally related compounds. The adsorption process for MIPs in this study can be completed within 45 min, which is much faster than that of bulk MIPs synthesized by traditional free-radical polymerization. The resulting imprinting polymer was evaluated for its use as a sorbent support in an off-line solid-phase extraction approach to recover BPA from diluted aqueous samples. The optimized extraction protocol resulted in a reliable MISPE method suitable for selective extraction and preconcentration of BPA from tap water, human urine and liquid milk samples. This article demonstrates the practical feasibility of the MIPs prepared via ROMP as solid-phase extraction materials.     

Ultrasound‐Assisted Preparation of Molecularly Imprinted Polymers: Effects on Polymer Morphology,Binding, and Chromatographic Behavior

Abstract

The influence of sonication on the preparation of molecularly imprinted polymers (MIPs) toward theophylline has been studied. The study showed that MIPs prepared in an ultrasonic bath operating at 35 kHz displayed binding and separation characteristics similar to those of the reference MIPs prepared using more traditional protocols. The data illustrates how well the prepolymerization complexes formed in solution prior to polymerization survive the effects of cavitations induced in the liquid. Furthermore, the results show that sonication can be used as a tool for the preparation of MIPs, thus offering the chemist a way of increasing the solubility of troublesome templates. Sonication also presents an opportunity to achieve aided initiation and effective degassing without sacrificing binding capacity or rigidity.     

Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media

The surface molecular imprinting technique has been proposed as a prospective strategy for template molecule recognition and separation by devising the recognition sites on the surface of imprinted materials. The purpose of this study was to establish a novel drug delivery system which was developed by surface molecular imprinting method using β-cyclodextrin (β-CD)-grafted chitosan (CS) (CS-g-β-CD) microspheres as matrix and sinomenine hydrochloride (SM) as the template molecule. By adjusting the amount of functional monomer and cross-linking agent, we got the more excellent adsorption of CS-g-β-CD molecularly imprinted polymers (MIPs-CS-g-β-CD). When the amount of functional monomer was 6 mmol and cross-linking agent was 20 mmol, the maximum binding capacity of MIPs and non-imprinted polymers (NIPs) was 55.9 mg/g and 37.2 mg/g, respectively. The results indicated that the recognition of SM with MIPs was superior to NIPs. The adsorption isotherms of MIPs-CS-g-β-CD indicated that the adsorption behavior fitted better to the Langmuir model, which showed that the adsorption process of polymer was monomolecular layer. In in vitro drug release studies, the accumulative release amount of MIPs-CS-g-β-CD was up to 78% within 24 h. MIPs exhibited an excellent controlled SM release profile without burst release and the mechanism of SM release was shown to conform to non-Fick diffusion. Therefore, MIPs-CS-g-β-CD were successfully applied to extraction of SM and used as the materials for drug delivery system.