Enhanced Properties and Lactose Hydrolysis Efficiencies of Food-Grade β-Galactosidases Immobilized on Various Supports: a Comparative Approach

In this study, a fungal and two yeast β-galactosidases were immobilized using alginate and chitosan. The biochemical parameters and lactose hydrolysis abilities of immobilized enzymes were analyzed. The pH optima of immobilized fungal β-galactosidases shifted to more acidic pH compared to free enzyme. Remarkably, the optimal temperature of chitosan-entrapped yeast enzyme, Maxilact, increased to 60 °C, which is significantly higher than that of the free Maxilact (40 °C) and other immobilized forms. Chitosan-immobilized A. oryzae β-galactosidase showed improved lactose hydrolysis (95.7%) from milk, compared to the free enzyme (82.7%) in 12 h. Chitosan-immobilized Maxilact was the most efficient in lactose removal from milk (100% lactose hydrolysis in 2 h). The immobilized lactases displayed excellent reusability, and chitosan-immobilized Maxilact hydrolyzed >?95% lactose in milk after five reuses. Compared to free enzymes, the immobilized enzymes are more suitable for cost-effective industrial production of low-lactose milk due to improved thermal activity, lactose hydrolysis efficiencies, and reusability.

     

Effect of hair dyes and bleach on the hair protein patterns as revealed by isoelectric focusing

The effect of hair dyes, i.e., temporary, semi-permanent, or permanent hair dyes, or hair bleach on the isoelectric focusing (IEF) hair protein patterns was studied. A permanent hair dye (metallic, alkaline oxidative, or acidic oxidative) and hair bleach induced changes in the IEF hair protein patterns and in the intensity of hair protein bands. The changes in the IEF patterns, caused by the alkaline oxidative dye or the bleach, are considered to result from the combined effect of an alkaline agent and an oxidative agent in the alkaline oxidative dye and in the hair bleach.     

高效液相色谱法测定氧化型染发产品中40种染发剂

氧化型染发产品中的多种染发剂具有不同程度的致敏性及其他毒性,建立快速、准确检测多种染发剂的方法,为该类产品监管提供有效的技术手段,十分必要。该研究建立了氧化型染发类产品中40种染发剂的高效液相色谱测定方法。染发产品经含70%乙醇的亚硫酸氢钠水溶液涡旋、超声提取,并经亚硫酸氢钠水溶液稀释后,以0.02 mol/L乙酸铵水溶液(含4%乙腈)和乙腈为流动相,采用Waters Atlantis^® T3 MV Kit色谱柱(250 mm×4.6 mm, 5 μm)分离,配合柱温变化进行梯度洗脱,二极管阵列检测器检测,检测波长为235 nm和280 nm,外标法定量。结果表明,40种染发剂在各自范围内线性关系良好,相关系数均大于0.999; 40种染发剂的检出限为5~168 μg/g,定量限为16~504 μg/g;各染发剂在3个添加水平下的平均回收率为81.4%~109.6%, RSD均小于5%;各染发剂标准溶液在24 h内稳定性良好,RSD为0.2%~2.2%。与现行标准检验方法相比,该方法较大程度地增加了单一液相色谱条件下可测定的染发剂,特别是准用染发剂种类(36种),提高了检测效率,并可保证检测结果的灵敏度与准确性,适用于氧化型染发产品中多种染发剂的检测分析。     

Determination of dye intermediates in oxidative hair dyes by fused-silica capillary gas chromatography

A fused-silica capillary gas chromatographic method is described for the determination of dye intermediates in oxidative hair dyes. An appropriate amount of hair dye sample is dissolved in 10 ml of methanol containing 0.25 g of ammonium thioglycolate and an appropriate amount of 2-amino-4-methylphenol as an internal standard. This solution is directly injected into a gas chromatograph. A fused-silica capillary column with cross-linked methyl silicone OV-1 or SE-54 as a liquid phase yields excellent resolution of dye intermediates. Some factors affecting the quantitation of dye intermediates are discussed. The proposed method gave good recoveries and reproducibilities, and permits simultaneous determination of various types of dye intermediates without any pretreatment. The use of a nitrogen-phosphorus detector allows the selective detection of nitrogen-containing dye intermediates. This simple and versatile method is applicable for the determination of dye intermediates in commercial hair dyes.     

高效液相色谱法同时测定氧化型染发产品中33种染发剂

建立了高效液相色谱同时测定氧化型染发产品中33种禁限用染发剂含量的分析方法。采用Waters Atlantis^® T3 MV Kit色谱柱（250 mm×4.6 mm，5 μm），以磷酸盐缓冲液-乙腈为流动相，梯度洗脱，流速为1.0 mL/min，柱温为25℃；采用二极管阵列检测器（DAD），检测波长为235及280 nm，进样量为5 μL。结果表明，各成分在线性范围内线性关系良好，相关系数均高于0.999，各成分精密度实验相对标准偏差（RSDs）均小于2%；四氨基嘧啶硫酸盐和2，4-二氨基苯氧基乙醇盐酸盐在12 h内稳定性实验RSDs小于5%，其余31种成分在24 h内稳定性实验RSDs均小于5%；各成分在3个浓度水平下的加标回收率为77.6%~116.3%。该方法简便、快速、准确，适用于氧化型染发产品中多种染发剂的检测。     

Simultaneous determination of p-phenylenediamines and aminophenols in hair dye products: interlaboratory study

An isocratic HPLC method routinely used in the National Laboratory for Food and Drug Analysis of Taiwan was validated for the simultaneous determination of six aminophenols and phenylenediamines in commercial hair dyes. After extraction of the commercial hair dye product, the dye intermediates were determined by HPLC. Recoveries from the extraction were between 91.6 and 96.5%. The method was then evaluated in an interlaboratory collaborative study according to AOAC guidelines. Five laboratories in Taiwan participated in the study that analyzed the test product, which was preanalyzed by two laboratories to ensure acceptable homogeneity. The RSD(r) and RSD(R) values of the measurements obtained for the dye intermediates in the product were < or = 3.75 and < or = 5.95%, respectively. The method demonstrated acceptable reproducibility, as evidenced by HorRat values of 0.82- 0.97. The applicability of the method to the determination of oxidative hair dye components was further demonstrated in analyses of two different products. The method is thus proposed to be used by manufacturers and laboratories to evaluate the quality of commercial hair dyes containing the six aminophenols and phenylenediamines.     

Synthesis of new reactive dyes containing commercial UV-absorbers with enhanced simultaneous dyeing and anti-UV properties for cotton fabric

Two new reactive anti-UV dyes were synthesized based on two commercial UV-absorbers, ethyl 4-aminobenzoate for dye 1 and 4-aminobenzophenone for dye 2, which were incorporated in a structure modified from commercial reactive dye CI Reactive Red 198 (dye 3). Optimum exhaustion and total fixation values were achieved at 80 ​g/l sodium sulphate for dye 1 and 60 ​g/l sodium sulphate for dye 2, 20 ​g/l sodium carbonate at 70 ​°C for dye 1 and 80 ​°C for dye 2 and 60 ​min fixation time for both dyes. The two new reactive dyes exhibited higher dyeing properties and UPF values than the commercial reactive dye over all the dye concentrations studied. The new reactive dye 1 achieved the highest exhaustion, total fixation and UPF values. The fastness properties obtained for all the dyeings ranges from good to excellent.     

Enhanced β-Galactosidase Production from Whey Powder by a Mutant of the Psychrotolerant Yeast <Emphasis Type="Italic">Guehomyces pullulans</Emphasis> 17<Emphasis Type="Italic">–</Emphasis>1 for Hydrolysis of Lactose

In order to isolate β-galactosidase overproducers of the psychrotolerant yeast Guehomyces pullulans 17–1, its cells were mutated by using nitrosoguanidine (NTG). One mutant (NTG-133) with enhanced β-galactosidase production was obtained. The mutant grown in the production medium with 30.0 g/l lactose and 2.0 g/l glucose could produce more β-galactosidase than the same mutant grown in the production medium with only 30.0 g/l lactose while β-galactosidase production by its wild type was sensitive to the presence of glucose in the medium. It was found that 40.0 g/l of the whey powder was the most suitable for β-galactosidase production by the mutant. After optimization of the medium and cultivation conditions, the mutant could produce 29.2 U/ml of total β-galactosidase activity within 132 h at the flask level while the mutant could produce 48.1 U/ml of total β-galactosidase activity within 144 h in 2-l fermentor. Over 77.1% of lactose in the whey powder (5.0% w/v) was hydrolyzed in the presence of the β-galactosidase activity of 280 U/g of lactose within 9 h while over 77.0% of lactose in the whey was hydrolyzed in the presence of β-galactosidase activity of 280 U/g of lactose within 6 h. This was the first time to show that the β-galactosidase produced by the psychrotolerant yeast could be used for hydrolysis of lactose in the whey powder and whey.     

Applicability of a yeast bioassay in the detection of steroid esters in hair

The aim of the present study was to demonstrate the applicability of a yeast androgen and estrogen bioassay in the detection of steroid esters in hair samples of animals treated with a hormone ester cocktail. The outcome of the activity screenings was critically compared with the results previously obtained with LC-MS/MS analysis. Hair samples of one pour-on treated animal, 10 ml DMSO containing 25 mg estradiol benzoate (EB), 60 mg testosterone decanoate (TD) and 60 mg testosterone cypionate (TC), were selected and analyzed with the androgen and estrogen yeast bioassay. Results showed that by the introduction of a hydrolysis step, bioassays can be used to screen for the presence of hormone esters in hair samples. Based on the difference in fluorescence responses between the non-hydrolyzed and the hydrolyzed hair samples, it was possible to detect the presence of EB up to at least 56 days after a single pour-on treatment and to detect the presence of TC and TD up to at least 14 days after the treatment. Although the LC-MS/MS analysis could detect TC and TD up to 49 days after treatment, bioassays have the advantage that they can also detect any (un)known steroid ester.     

Improving safety performance of lactose-fueled binary pyrotechnic systems of smoke dyes

The lactose/KClO₃ is a widely used pyrotechnic mixture to vaporize organic materials, such as smoke dyes. However, because of low ignition temperature of this mixture, serious precaution should be taken into account to prevent its accidental self-ignition. In order to find a safe and efficient alternative of this conventional mixture, KClO₃ has been replaced by common oxidizing agents including KMnO₄, KNO₃, KClO₄, Ba(NO₃)₂, PbO₂ and NH₄ClO₄. TG and DTA analysis have been used to obtain thermal characteristic of the mixtures. Based on ignition temperature of the pyrotechnic mixtures we can divide them into four categories as follows: (1) the mixture igniting at low temperature, i.e., at about 200 °C. (2) Moderate temperature igniting mixture, in which ignition occurs at 300–400 °C. (3) High temperature igniting mixture with ignition temperature higher than 400 °C .(4) Not igniting mixtures. Also, the apparent activation energy (E), ΔG ^#, ΔH ^#, ΔS ^# and critical ignition temperature (T _b ) of the ignition processes of low and moderate temperature igniting mixtures were obtained from the DSC experiments. Finally, among the investigated mixtures, lactose/KNO₃ can be considered as a safe and efficient pyrotechnic composition for vaporization of organic materials, such as smoke dyes, due to its moderate safe ignition temperature.     

Quantitative determination of cationic modified polysaccharides on hair using LC–MS and LC–MS–MS

Cationic polysaccharides containing N-hydroxypropyl-N,N,N-trimethylammonium substituents are widely used as conditioning agents for hair-care products. A sensitive method has been developed for the quantitation of these polymers. After acidic extraction from hair the polysaccharides are hydrolyzed using trifluoroacetic acid. The cationic monoglycosides are determined using liquid chromatography–tandem mass spectrometry (LC–MS–MS). The developed method is independent of hair treatment. Even hair cut from test persons after customary hair wash can be analyzed. After treatment of natural and bleached hair tresses using a real-life treatment procedure 180 g and 300 g of polymer per gram hair were quantified, respectively. Additionally the fragmentation mechanism of the cationic N-hydroxypropyl-N,N,N-trimethylammonium group during electrospray ionization was investigated. A mass loss of 60 Da in combination with loss of a single charge is observed and associated with cleavage of trimethylamine and a proton. It is assumed that this process is promoted by the anionic counter-ion which might be hydroxide in an aqueous environment.     

Sorption of dyes on cellulose II: effect of alkali treatment of fibre and dye structure

Cellulose is a linear 1,4-β-glucan polymer where the units are able to form highly ordered structures, as a result of extensive interaction through intra- and intermolecular hydrogen bonding of the three hydroxyl groups in each cellulose unit. Alkali has a substantial influence on morphological, molecular and supramolecular properties of cellulose II polymer fibres causing changes in crystallinity. Lyocell fibres pre-treated with 0.0, 2.0, and 4.0 mol dm⁻³ aqueous NaOH solution were dyed with hydrolyzed reactive dyes that had different molecular shapes and sizes. Overall exhaustion (q _e), value of K, and −ΔG increased for lyocell samples pre-treated with aqueous NaOH solution in the following order: 2.0 > 4.0 > 0.0 mol dm⁻³ NaOH. The same trends were observed for colour strength (K/S) values of the dyeings. Pre-treatment of lyocell with 2.0 mol dm⁻³ NaOH creates the substrate that achieves the most thermodynamically favourable system for sorption of hydrolyzed reactive dyes, as at this concentration crystallinity decreases (with respect to 0.0 mol dm⁻³ NaOH treated lyocell) to afford higher sorption; however, at higher alkali concentrations the macro-sorbent forms a compacted unit that limits diffusion within the sorbent interior. Molecular size of the sorbate dye has a significant effect on the sorption process: for the largest dye structure the sorption isotherm is most closely correlated to a Langmuir isotherm; as the size of the dye decreases correlation to a Langmuir isotherm is observed, but with good correlation to the Freundlich isotherm; as the size of the dye is decreased further sorption is more typical of a Freundlich isotherm.     

Separation and determination of basic dyes formulated in hair care products by capillary electrophoresis

A capillary electrophoretic (CE) method for analyzing five basic dyes (Basic Red 76, Basic Brown 16, Basic Yellow 57, Basic Brown 17 and Basic Blue 99) sold under the trade name Arianor, which are commonly used in hair care products, has been established. A buffer of 100 mM acetic acid-ammonium acetate (50:50) containing 90% (v/v) methanol was employed in a fused-silica capillary of 40.0 cm x 50 microm I.D. with a bubble cell arrangement. Washing the capillary end immediately after injection was effective in preventing peak tailing of the basic dyes, which was due to their adsorption onto the outer wall of the capillary during the injection. Under these optimized conditions, acceptable results for reproducibility, limit of detection and quantitation, and linearity were obtained for the five authentic dyes tested. The recoveries of five authentic basic dyes spiked to three commercial hair care products also provided with acceptable results. This optimized CE method is useful for the analysis of mixed basic dyes in hair care products.     

A simple method for removal of toxic dyes such as Brilliant Green and Acid Red from the aquatic environment using Halloysite nanoclay

This project explains an easy, simple and eco-friendly method to remove some toxic dyes like Brilliant Green and Acid Red from aquatic solution by technique of solid-phase extraction that uses Halloysite nanoclay eco-friendly solid phase as absorbent surface for adsorption of dye. The physical properties of the HNC such as scanning electron microscopy, transmission electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and surface area analysis were studied. The best conditions like pH of the solution, HNC weight, contact shaking time, the temperature of the solution, and ionic strength were investigated for removal effectiveness. The experimental data of the adsorption process showed that HNC can remove most of the dyes within 30 min, with an adsorption capacity of 12.5 mg/g for A.R dye and 13.9 mg/g for B.G dye on HNC solid phase at optimum conditions. The removal process of dyes on HNC was studied kinetically and thermodynamically, and the data confirms that the pseudo-second-order kinetic model was able to describe the adsorption process. Thermodynamic data confirms the process was spontaneous andexothermic in nature for A.R dye, while was spontaneous and endothermic in nature for B.G dye. Finally, the effectiveness of HNC was inspected by removing dyes from three various real samples, and the results showed high performance in removing dyes on HNC for four consecutive cycles.     

丝素蛋白纤维的接枝聚合Ⅲ．丝素蛋白纤维的接枝聚合染色

本文提出了通过接枝聚合物将丝素蛋白纤维的染色的设想：在染料分子上引入丙烯酰基，然后将其接枝到丝素蛋白纤维表面。将2－羟基－4－丙烯酰氧二苯酮（HAOBP），1－羟基－2－丙烯酰氧蒽醌（HAOAQ）和1，5，8－三羟基－2－丙烯酰氧蒽醌（THAOAQ）等三种染料，分别用无引发剂存在下的接枝聚合法接枝到丝素蛋白纤维表面，使丝素蛋白纤维分别染成了浅黄、浅红和浅紫三种颜色。这样染色了的丝素蛋白纤维在浓酸或浓碱溶液中回流，未发生任何裉色现象，并且其热稳定性和紫外稳定性也得到了显著的改善。力学性能未下降。采用甲基丙烯酸甲酯（MMA）与染料单体共同进行接枝聚合染色，可以提高丝素蛋白纤维的光泽度，并可将接枝整理和染色两道工序合而为一。HAOBP、HAOAQ和THAOAQ在丝素蛋白纤维上的接枝率（mol单体／g丝），具有如下顺序，HAOBP＞HAOAQ＜THAOAQ。该顺序与它们的亲水性顺序恰好相反，这一结果支持了Imoto等人的无引发剂存在下的接枝聚合发生在丝素蛋白纤维的疏水区域的观点。     

Influence of Basic Red 1 dye adsorption on thermal stability of Na-clinoptilolite and Na-bentonite

Influence of physically adsorbed basic red 1 (BR1) dye on the physicochemical properties of natural zeolite (clinoptilolite) and clay (bentonite) was compared using adsorption, FTIR, and TG/DTA methods. A larger adsorption of the dye was observed for bentonite (0.143 mmol/g) than for clinoptilolite (0.0614 mmol/g) per gram of an adsorbent. However, the adsorption values are the same per surface unit (1.8 μmol/m²). The result (per gram) is due to location of dye molecules in interlayer and interparticle space of bentonite with much larger specific surface area than that of clinoptilolite. The dye adsorption leads to a decrease in the specific surface area and the pore volume of both minerals. The adsorption changes also a character of active sites and thermal stability. A TG study shows that the dye adsorption on bentonite changes adsorbed water amounts, weight loss, and decomposition temperature. In the case of zeolite, the dye adsorption insignificantly influences the thermal stability. The dehydration energy distributions calculated from the Q-TG and Q-DTG data demonstrate a complex mechanism of water thermodesorption and the influence of adsorbed dye on this process.     

Enhanced adsorption performance of a novel Fe‐Mn‐Zr metal oxide nanocomposite adsorbent for anionic dyes from binary dye mix: Response surface optimization and neural network modeling

A novel adsorbent, Fe‐Mn‐Zr metal oxide nanocomposite was synthesized and investigated for removal of methyl orange (MO) and eosin yellow (EY) dyes from binary dye solution. The magnetic nanocomposite has shown surface area of 143.01 m²/g and saturation magnetization of 15.29 emu/g. Optimization was carried out via response surface methodology (RSM) for optimizing process variables, and optimum dye removal of 99.26% and 99.55% were obtained for MO and EY dye, respectively with contact time 62 min, adsorbent dose 0.45 g/l, initial MO concentration 11.0 mg/l, and initial EY concentration 25.0 mg/l. A feed forward back propagation neural network model has shown better prediction ability than RSM model for predicting MO and EY dye removal (%). Adsorption process strictly follows Langmuir isotherm model, and enhanced adsorption capacities of 196.07 and 175.43 mg/g were observed for MO and EY dye, respectively due to synergistic effects of physicochemical properties of trimetal oxides. Surface adsorption and pore diffusions are the mechanisms involved in the adsorption as revealed from kinetic studies.     

Linear and nonlinear relations between DSC parameters and elastic moduli for chemically and thermally treated human hair

Against the practical context of thermal straightening, hair samples were obtained with a chemical (bleaching) as well as a cumulative thermal history (0–800 s, 200 °C). On these samples, tensile testing and DSC analysis, both in the wet state, were conducted to obtain the elastic moduli E_w as well as denaturation temperatures T_D and enthalpies ΔH_D. 3D plots show overall linearity for the relationships between the parameters for natural hair. For bleached hair, pronounced nonlinearities develop beyond 300 s of thermal treatment. At this stage, T_D as well as E_w approaches limiting values, consistent with the state of a highly cross-linked, thermoset polymer. 2D projections are used to investigate the correlations between pairs of parameters. The results show that bleaching imparts a specific sensitivity for thermal damage, namely, to the matrix proteins, which more readily than the intermediate filaments (IF) turn into a thermoset. Overall, correlations between parameters hold well prior to the thermoset range. It is thus suggested that tensile testing to determine the elastic modulus and DSC come to consistent and equivalent results, at least, for the current experimental context. However, while E_w combines contributions of IFs and matrix, DSC differentiates the specific property changes of these components.

     

Preparation of highly selective solid-phase extractants for Cibacron reactive dyes using molecularly imprinted polymers

Selective polymeric extractants were prepared for preconcentration of Cibacron reactive red dye, a dye that is often applied with Cibacron reactive blue and Cibacron reactive yellow for dyeing of fabrics. The best extractant was fabricated (in chloroform) using methacrylic acid (as monomer), ethylene glycol dimethacrylate (as crosslinker), AIBN (as initiator for polymerization), and red dye as template molecule, with a molar stoichiometric ratio of 8.0:40.0:2.5:0.63, respectively. The structure of the molecularly imprinted polymer (MIP) was robust, and resisted dissolution up to 260 °C. Compared with the un-imprinted polymer, the imprinted product has a large specific surface area which improved its adsorption capacity. The effect of imprinting was obvious from the adsorption capacity measured at pH 4 for red dye (the imprinted molecule), which was increased from 24.0 to 79.3 mg g⁻¹ after imprinting. Equilibrium adsorption studies revealed that the dye-imprinted-polymer enables efficient extraction of red dye even in the presence of blue and yellow dyes which have similar chemical natures to the red dye. The selectivity coefficients S _{red dye/dye}, were 13.9 and 17.1 relative to the yellow and blue dyes, respectively. The MIP was found to be effective for red dye preconcentration, with a preconcentration factor of 100, from tap water and treated textile wastewater. The factors affecting extraction of red dye by the MIP were studied and optimized. Under the optimized extraction conditions, red dye was selectively quantified in the presence of other competing dyes at a concentration of 20 μg L⁻¹ from different water systems with satisfactory recoveries (91–95%) and RSD values (∼5.0%).     

Quartzite an efficient adsorbent for the removal of anionic and cationic dyes from aqueous solutions

Quartzite obtained from local source was investigated for the removal of anionic dye congo red (CR) and cationic dye malachite green (MG) as an adsorbent from aqueous solution in batch experiment. The adsorption process was studied as a function of dye concentration, contact time, pH and temperature. Adsorption process was described well by Langmuir and Freundlich isotherms. The adsorption capacity remained 666.7 mg/g for CR dye and 348.125 mg/g for MG dye. Data was analyzed thermodynamically, ΔH⁰ and ΔG⁰ values proved that adsorption of CR and MG is an endothermic and spontaneous process. Adsorption data fitted best in the pseudo-first order kinetic model. The adsorption data proved that quartzite exhibits the best adsorption capacity and can be utilized for the removal of anionic and cationic dyes.