Antioxidant properties and antioxidant compounds of various extracts from the edible basidiomycete Grifola frondosa (Maitake)

Grifola frondosa is an edible mushroom currently available in Taiwan. Ethanolic, cold-water and hot-water extracts were prepared and their antioxidant properties were investigated. At 1 mg/mL, G. frondosa T1 and T2 cold-water extracts showed high reducing powers of 1.02 and 0.50, respectively. Chelating abilities on ferrous ions of G. frondosa T1 and T2 were higher for cold-water extracts than for ethanolic and hot-water extracts. For the scavenging ability on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, G. frondosa T1 and T2 extracts were effective in the following order: ethanolic > hot-water > cold-water. The G. frondosa hot-water extract showed high scavenging ability on superoxide anions. Total phenols, flavonoids, ascorbic acid and α-tocopherol are the major antioxidant components found in the various G. frondosa extracts. Based on EC(50) values (<20 mg/mL) obtained, the various extracts from G. frondosa investigated in this study display potent antioxidative properties.     

Development of an analytical method for polycyclic aromatic hydrocarbons and their derivatives

Garlic and onion, are well known for their medical value, especially in against cancer and anticardiovacular diseases. "Alliins" (S-alk(en)yl-L-cysteine sulphoxides) are sources of major active compounds in Allium plants. Se incorporation into garlic significantly increases activities of garlic in cancer prevention and inhibition. Selenomethionine, selenocysteine and Se-methylselenocysteine have been identified in garlic and onion. Previously we identified gamma-glutamyl-Se-methyl-L-selenocysteine, in extracts of garlic cultivated in Se-rich soil [Med. Res. Rev. 16 (1) (1996) 111], suggesting the possible existence of Se-alk(en)yl-L-cysteine selenoxides (Se-"alliins") in garlic. Several comparative experiments were carried out to demonstrate the existence of Se-"alliins" in Se-enriched garlic and onion. We found that there was one similar time-dependent Se signal in HPLC-inductively coupled plasma MS chromatograms of cold-water extracts of freeze-dried garlic powder and fresh garlic. This signal was lost when the extracts of garlic powder and fresh garlic were stored for 1 day at >4 degrees C, but remained in fresh onion extract at the same storage conditions. These phenomena and possible mechanisms are discussed. An additional experiment showed that Allium species cultivated in Se-rich soil might contain two different Se-"alliins".     

Antibacterial activity of an aqueous extract of Petroselinum crispum leaves against pathogenic bacteria isolated from patients with burns infections in Al-najaf Governorate, Iraq

The purpose of this study was to investigate, by use of the agar well diffusion method, the ability of cold-water and hot-water extracts of Petroselinum crispum leaves to inhibit bacteria isolated from patients with burns infections. The results revealed that 250 mg/ml of the hot-water extract was the more effective inhibitor of the growth of P. aeruginosa. The inhibition zone diameter of 29.667 mm was significantly different (P < 0.05) from that for nitrofurantoin, chosen as positive control. From the overall results obtained it is evident that the plant screened has anti-bacterial activity against some bacteria associated with burns infections.     

Application of Crude Pomace Powder of Chokeberry,Bilberry, and Elderberry as a Coloring Foodstuff

Berry pomace, rich in polyphenols, especially anthocyanins, accumulates during the production of red juices. Pomace from chokeberry (Aronia melanocarpa Michx.), bilberry (Vaccinium myrtillus L.), and elderberry (Sambucus nigra L.) represent good sources of coloring foodstuffs. Pomace powders (PP) were prepared by milling the seedless fractions of the three dried berry pomaces (50 °C, 8 h). Techno-functional properties of the powders such as particle size distribution, bulk density, sedimentation velocity, and swelling capacity were determined to evaluate the powders for possible food applications. Total anthocyanin content was quantified by UHPLC-DAD before and during a storage experiment to monitor the degradation of anthocyanins in the PP and in a yogurt model application. The high content of phenolic compounds and the still intact cell structure ensured high stability of anthocyanins over 28 days of storage. In the model application, color saturation was stable over the whole storage time of 14 days. Regarding the techno-functional properties, only a few differences between the three PP were observed. The particle size of elderberry PP was larger, resulting in lowest bulk density (0.45 g/mL), high cold-water solubility (16.42%), and a swelling capacity of 10.16 mL/g dw. Sedimentation velocity of the three PP was fast (0.02 mL/min) due to cluster formation of the particles caused by electrostatic and hydrophobic properties. Compared to other high-intensity coloring foodstuffs, the use of PP, showing acceptable color stability with potential health-promoting effects, represents a wide applicability in different food applications and especially in products with a longer shelf-life.     

Synthesis and characterization of hydroxypropyl cellulose from bacterial cellulose

Bacterial cellulose produced by Acetobacter xylinum has been reacted with propyleneoxide to synthesize hydroxypropyl cellulose(HPC) under different reaction conditions while diluted by toluene. The effects of mass ratio of bacterial cellulose to propyleneoxide, dilutability of toluene, reaction temperature(T) and time(t) were investigated by series of experiments. The degree of substitution(DS), hydroxypropyl content(A) and yield(η) were compared. The optimized product exhibited cold-water solubility and hot-water gelatinization in aqueous medium. Further study was carried out with FTIR, TGA, XRD, SEM and 13C-NMR for characterization. The water/air contact angle measurement reveals that it is a good hydrophobic material with good mechanical properties.     

Hydrous pyrolysis of organic sulfur compounds: Species and distribution of secondary derivatives

The species and distributions of secondary compounds generated from eight organic sulfur compounds by way of hydrous pyrolysis were investigated. The results indicate that the formation of the secondary compounds and their structures and distribution depend on their thermal stability and the types of initial model compounds, as well as hydrous pyrolysis temperatures, while a large number and higher abundance of the secondary compounds appear to be formed mainly between 200 and 270 °C. Assignment of these secondary compounds indicates that alkyl thiols and sulfides are the most reactive compounds, producing a large number and relatively high amount of secondary organic thiols, sulfides, disulfides, sulfoxides and sulfones; while the secondary compounds generated from the thiophenic compounds are mainly low abundant methylated isomers of their own. Disulfidization, sulfidization and oxidation are the most significant mechanism(s) associated with the transformation of the initial thiols and sulfides model compounds. Alkyl thiophenes are only found to be formed from the alkyl thiol and sulfides, while it is noticed that thiophene, benzothiophene and dibenzothiophene are not genetically connected as they are not precursors of each other. Methylated thiophenic compounds are quantitatively insignificant but commonly present in the pyrolysates of thiophenes, benzothiophenes and dibenzothiophenes.     

Agostic bonds in cyclometalation

Cyclometalation reactions proceed very easily with one step reaction between metal compounds and substrates having a heteroatom such as O, S, N, P and As. However, under mild reaction conditions, many agostic compounds which are intermediates in these cyclometalation reactions, can be isolated. The metal compounds used for the formation of these agostic intermediates are both transition metal and main group metal compounds. The substrates are nitrogen-containing compounds, phosphorus-containing compounds, oxygen-containing compounds and sulfur-containing compounds. These agostic intermediates are mainly δ-C-H agostic compounds, some are γ-C-H agostic compounds and very few are ?-C-H-agostic compounds. The agostic intermediates are prepared, usually, under mild reaction conditions in the cyclometalation reaction. These agostic compounds are also prepared from cyclometalation reaction products, e.g., by the protonation, irradiation, and elimination of ligand molecules by vacuum, inert gas current, dehydration with a molecular sieves 4A, etc. Some agostic compounds are utilized for preparation of stable catalysts, e.g., hydrogenation catalysts.     

Virtual screening and library enumeration of new hydroxycinnamates based antioxidant compounds: A complete framework

Designing of molecules for drugs is important topic from many decades. The search of new drugs is very hard, and it is expensive process. Computer assisted framework can provide the fastest way to design and screen drug-like compounds. In present work, a multidimensional approach is introduced for the designing and screening of antioxidant compounds. Antioxidants play a crucial role in ensuring that the body's oxidizing and reducing species are kept in the proper balance, minimizing oxidative stress. Machine learning models are used to predict antioxidant activity. Three hydroxycinnamates are selected as standard antioxidants. Similar compounds are searched from ChEMBL database using chemical structural similarity method. The libraries of new compounds are generated using evolutionary method. New compounds are also designed using automatic decomposition and construction building blocks. The antioxidant activity of all designed and searched compounds is predicted using machine learning models. The chemical space of searched and generated compounds is envisioned using t-distributed stochastic neighbor embedding (t-SNE) method. Best compounds are shortlisted, and their synthetic accessibility is predicted to further facilitate the experimental chemists. The chemical similarity between standard and selected compounds is also studied using fingerprints and heatmap.     

TRIMETHYLAMMONIUM CHLOROCHROMATE ADSORBED ON ALUMINA AS A NEW REAGENT FOR THE CLEAVAGE OF OXIMES AND P-NITROPHENYLHYDRAZONES

Derivatives of carbonyl compounds such as oximes and p-nitrophenylhydrazones have played an important role in the protection of carbonyl compounds,as they are highly crystalline and stable compounds. They are also very extensively used for the characterization and purification of carbonyl compounds. Regeneration of carbonyl compounds from their derivatives under mild condition is an important process in synthetic organic chemistry.     

GC FPD method for the simultaneous speciation of butyltin and phenyltin compounds in waters

A method is described for the simultaneous determination of nanogram amounts of mono-, di- and tri-butyltin compounds in water. The procedure is based on the conversion of tin compounds to volatile species by Grignard pentylation and analysis using GC with flame photometric detection (GC FPD). The ionic compounds are extracted from diluted acidified (HBr) aqueous solutions by using a pentane-tropolone solution. The extracted organotin compounds are pentylated by a Grignard reagent and purified on a Fluorisil column before analysis by GC FPD. The detection limits are 20 ng dm^?3 for butyltin compounds and 50 ng dm^?3 for phenyltin compounds. Recoveries from spiking experiments in tap-water and natural seawater matrices, in which no organotin compounds were detected, were greater than 90% for most of the alkyltin compounds.     

Mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones and their derivatives

The mass spectra of some α-substituted phenyl-α,α′-dimethoxyl ketones (compounds 1) and their 2,4-dinitrophenylhydrazones (compounds 2) and semicarbazones (compounds 3) have been studied. The characteristic fragments at m/z (M ? 73) from compounds 1, m/z (M ? 253) from compounds 2 and m/z (M ? 130) from compounds 3 are abundant and proposed to be [ArCROCH₃]⁺. Fragmentations yielding [M⁺ ? 49] from compounds 2 are abnormal and probably involve the methoxyl and nitro groups. The intense peak at m/z 130 due to [CH₃OCH₂CNNHCONH₂]⁺ from compounds 3 corresponds to α-cleavage of the molecular ion. Some other fragments from these new compounds are interpreted in this paper.     

Thin-layer chromatographic separation and analysis of polynuclear aza heterocyclic compounds

Many thin-layer Chromatographic systems can be used for the general separation of aza heterocyclic compounds from polynuclear aromatic hydrocarbons. Several can be used for the separation of the aza compounds from each other. With alumina as the adsorbent the sterically hindered aza heterocyclic compounds can be readily separated from the non-hindered aza compounds.The use of the trifluoroacetic acid spot test on the thin-layer plate is discussed. Spectral data for the aza compounds are presented and discussed.     

Adsorption of aromatic compounds from solutions in <Emphasis Type="Italic">n</Emphasis>-heptane by modified nanoporous silica

The adsorption of anisole, anthracene, benzoic acid, benzene, naphthalene, phenanthrene, phenol, and carbon tetrachloride from dilute solutions in n-heptane on the modified nanoporous silica sorbents, Silasorb C18 and Phenyl-Silasorb, at 298 K is investigated by developing liquid chromatography. The Henry law constants and Helmholtz energy of adsorption for these aromatic compounds are calculated from their retention values. The adsorption isotherms of the aromatic compounds are calculated from their chromatographic peaks with allowances made for longitudinal smearing. A correlation is made between the Henry law constants calculated from the retention values of the aromatic compounds and from their adsorption isotherms. The influences of the surface modification of the silica adsorbents and the molecular structure of the aromatic compounds on their elution from the chromatographic column with n-heptane as the eluent are discussed. Contributions of functional groups in the molecules of the aromatic compounds to the Helmholtz energy of adsorption on different surfaces are estimated.     

反相高效液相色谱分离纯化天然除虫菊酯

天然除虫菊酯含有6种有效成分,但结构相似,分离困难。本研究以除虫菊酯精油为原料,通过优化反相高效液相色谱分离条件,分离纯化了除虫菊酯6种有效成分,纯度均达到99%。然后用气相色谱-质谱定性分析确证6种成分。本研究所建立的天然除虫菊酯6种有效成分的反相高效液相色谱分离纯化方法,为天然除虫菊酯除虫菊酯残留检测提供了准确的判断标准,为阐明天然除虫菊酯6种单一有效成分的杀虫机理研究奠定了基础,也为除虫菊酯6种单一有效成分纯品的生产提供了重要的方法参考。     

Drug-like index: a new approach to measure drug-like compounds and their diversity

Combinatorial organic synthesis (combinatorial chemistry or CC) and ultrahigh-throughput screening (UHTS) are speeding up drug discovery by increasing capacity for making and screening large numbers of compounds. However, a key problem is to select the smaller set of "representative" compounds from a virtual library to make or screen. Our approach is to select drug-like as well as structurally diverse compounds. The compounds, which are not very drug-like, are less taken into account or excluded even if they contribute to the diversity of the collection. Hence, the first step in the compound selection is to rank compounds in drug-like "degree". To quantify the drug-like "degree", drug-like index (DLI) is introduced in this paper. A compound's DLI is calculated based upon the knowledge derived from known drugs selected from Comprehensive Medicinal Chemistry (CMC) database. The paper describes the way of this knowledge base is formed and the procedure for selecting drug-like compounds.     

污水污泥流化床气化焦油的化学组成分析

以空气为气化剂、并通过GC-MS分析,研究了污水污泥流化床气化时气化温度（650、750和850 ℃）和污泥性质对污泥气化焦油产率及其化学组成的影响。结果表明,污泥气化焦油产率随气化温度的升高而降低,且厌氧消化污泥气化焦油的产率比未消化污泥的低。污泥气化焦油中的化学组成可分为五类：脂肪族化合物、脂环化合物、芳香烃、芳香烃衍生物和杂环化合物。随气化温度的升高,A²/O工艺的未消化污泥气化生成的焦油中脂肪族化合物和脂环化合物的产率均明显降低,芳香烃衍生物的产率则有显著地提高,而芳香烃和杂环化合物的产率均先增加后减少。气化温度为650 ℃时,活性污泥法消化污泥气化焦油中五类有机物的产率均低于未消化污泥的,而A²/O工艺消化污泥气化焦油中芳香烃产率高于未消化污泥的,其他四种有机物的产率则均低于未消化污泥的。     

具有生理活性的天然螺缩酮化合物研究进展

螺缩酮类化合物广泛存在于自然界中, 它们表现出的很好的生理活性已引起各国科学家的兴趣. 对近年来天然存在的螺缩酮化合物的研究进展进行了总结, 描述了这类化合物的结构特征, 展望了在医药、农药等方面的潜在发展前景.     

HPTLC analysis of organotin compounds in preservative solutions and preservative-treated wood

A high-performance thin-layer chromatographic (HPTLC) method is described for the determination of tributyltin compounds (bis(tri-n-butyltin) oxide, TBTO, and tri-n-butyltin naphthenate, TBTN) and their degradation products (dibutyltin and monobutyltin compounds). The organotin compounds are extracted from wood with ethanol containing 0.5% (v/v) of hydrochloric acid and the separation of the defferent kinds of organotin compounds is achieved by thin-layer chromatography. The sample spots are measured using a scanning densitometer after decomposing the organotin compounds to inorganic tin by ultraviolet irradiation and visualization of the spots with pyrocatechol violet. Applications of the method to detection and quantification of organotin compounds in preservative solutions, in recently impregnated wood, and in wood samples from five-year-old window frames are described.     

Adsorptive interaction between nitrogen compounds and organic and/or mineral phases in subsurface rocks. Models for compositional fractionation of pyrrolic nitrogen compounds in petroleum during petroleum migration

The results are reported of a range of laboratory chromatographic fractionation experiments with synthetic model compounds and a petroleum pyrrolic nitrogen fraction. Reversed phase separation of pyrrolic nitrogen compounds was governed mainly by the number of carbon atoms in the molecule, with little selectivity toward different positional isomers, whereas normal phase separation of the compounds could be explained in terms of steric effects related to alkylation position. Comparison of experimental results from model compounds with observations made previously using sets of natural samples taken from sedimentary basins clearly suggests adsorptive interactions between organic and mineral phases are involved in the compositional fractionation of pyrrolic nitrogen compounds in petroleum during migration. Detailed studies of the effects of petroleum migration on the molecular distribution of petroleum pyrrolic nitrogen compounds may provide useful, quantifiable, migration-related geochemical parameters.