Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓｈａｖｅｇａｉｎｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔ ｔｅｎｔｉｏｎｉｎｔｈｅｐａｓｔｄｅｃａｄｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｗｉｄｅｌｙｉｎｄｕｓ ｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｓａｎｄｆｒｉｅｎｄｌｉｎｅｓｓｔｏｅｎｖｉｒｏｎｍｅｎｔ .1 3Ｅｓｐｅ ｃｉａｌｌｙｈｙｄｒｏｐｈｏｂｉｃａｌｌｙｍｏｄｉｆｉｅｄｗａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓ(ＨＭＷＳＰ)ｗｈｉｃｈｂｅａｒａｓｍａｌｌａｍｏｕｎｔｏｆｈｙｄｒｏｐｈｏｂｅｓｏｎｔ…     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Layer structure estimation of three‐dimensional crystal and two‐dimensional molecular film for fluorinated comb copolymers

Comb copolymers containing both hydrogenated and fluorinated side‐chains were prepared by copolymerization using acrylic or methacrylic monomers in several ratios. The crystal structures of these copolymers and layer structures of their organized molecular films were investigated by wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and out‐of plane X‐ray diffraction. Further, to selectively estimate the regularity of shorter fluorocarbon side‐chains, organized molecular films of copolymers were investigated by polarized near‐edge X‐ray adsorption fine structure (NEXAFS) spectroscopy. From the results of these measurements, it was inferred that these copolymers formed highly ordered layer structures, and a long spacing was predominantly determined by the arrangement of hydrogenated side‐chains, except in copolymers having extremely high fluorocarbon contents. In the case of the organized molecular films, the fluorinated side‐chains of methacrylate copolymers cannot form a highly ordered arrangement, whereas those of acrylate copolymers were oriented on monolayers. However, in both cases, the hydrogenated side‐chains predominantly formed layer structures in the organized films, and the fluorinated side‐chains did not contribute to the formation of the layer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 534–546, 2008     

Bonding strength of fluorinated and hydrogenated surfactant to bovine serum albumin

The interactions between bovine serum albumin (BSA) and different surfactants are investigated by the fluorescence technique. Pairs of fluorinated and hydrogenated surfactants with similar hydrophobic chain lengths including potassium perfluorooctanesulfonate and sodium octanesulfonate are studied in order to determine their interactions with BSA. The binding constants and thermodynamic parameters between BSA and different surfactants are compared and the main binding strength is determined. The mechanism of quenching and change of particle size gives rise to the binding force. Based on the FRET theory, the distances between potassium perfluorooctanesulfonate/sodium octanesulfonate and BSA are calculated and it is found that the fluorinated surfactant exhibits stronger interactions with proteins than the hydrogenated one, which is also proved by zeta potential and TEM.     

Protein-surfactant interaction: differences between fluorinated and hydrogenated surfactants

The interactions of proteins with fluorinated/hydrogenated surfactants were investigated by circular dichroism and turbidity measurement. Pairs of fluorinated and hydrogenated surfactants with similar critical micelle concentrations (cmc), including sodium perfluorooctanoate/sodium decylsulfate and lithium perfluorononanoate/sodium dodecylsulfate were compared in view of their interactions with proteins including BSA, lysozyme, β-lactoglobulin and ubiquitin. It was found that fluorinated surfactants exhibited stronger interactions with proteins than hydrogenated ones, which, however, depended on the structures of both proteins and surfactant molecules. If the proteins are very stable, or the surfactant–protein interactions are very strong, such differences between the two kinds of surfactants might be indistinguishable.     

Self‐emulsification and surface modification effect of fluorinated amphiphilic acrylate graft copolymers

We report on self‐emulsification and surface modification effect of novel fluorinated amphiphilic graft copolymers prepared with perfluoroalkyl acrylate and 2‐dimethylaminoethyl methacrylate using simple macromonomer technique and radical copolymerization. The interfacial properties of amphiphilic graft copolymers were characterized with light scattering, contact angle measurement, and X‐ray photoelectron spectroscopy. The preparation of fluorinated amphiphilic graft copolymer was verified using nuclear magnetic resonance and Fourier transform infrared spectroscopy. It was observed that the fluorinated amphiphilic graft copolymer has both strong hydrophobic and hydrophilic properties and shows self‐emulsification ability without addition of external surfactants. The graft copolymer shows very low surface energy even though the copolymer has low content of hydrophobic segment and better performance than random copolymer for low‐energy surface modification. The addition of small amount of the graft copolymer (0.1 wt %) into the base poly(methyl methacrylate) was sufficient to lower the surface energy less than that of poly(tetrafluoroethylene). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Fluorocarbon- containing hydrophobically modified poly(N-isopropylacrylamide)

A fluorocarbon-modified poly(N-isopropylacrylamide) has been synthesized by copolymerization of N-isopropyl acrylamide with a small amount of acrylate or methacrylate containing a perfluoroalkyl group. It was found that the hydrophilicity of macromolecular backbone is an important factor to the solution properties of the copolymers and that hydrophobic association between fluorocarbon groups is stronger than that between the corresponding hydrocarbon analogies. The viscosity of some of the copolymer solutions was very sensitive to temperature. It was dilatant at higher fluorocarbon comonomer content ( > 0.20-1.0 mol%) and was Newtonian at very low fluorocarbon comonomer content (0.03-0.2 mol% ) . Evidence for hydrophobic association of the fluorocarbon groups was obtained from the effects of adding Nad and surfactants on the solution viscosity. The LC-ST properties of these copolymers were studied by DSC method and this was also found to be consistent with hydrophobic association between the fluorocarbo     

Sorption of anionic amphiphilic block copolymers by a network polycation

The interaction of amphiphilic block copolymers comprising an anionic block (polyacrylate or polymethacrylate) and a hydrophobic block (polystyrene, poly(butyl acrylate) or polyisobutylene) with lightly crosslinked poly(N,N-diallyl-N,N-dimethylammonium chloride) is studied for the first time. It is shown that the cationic hydrogel can sorb anionic amphiphilic block copolymers via electrostatic interaction with the corona of block copolymer micelles. The rate of sorption of block copolymer polyelectrolytes is significantly lower than the rate of sorption of linear polyions and is controlled by the lengths of the hydrophilic and hydrophobic blocks and the flexibility of the latter blocks. The sorption of amphiphilic block copolymers is accompanied by their self-assembly in the polycomplex gel and formation of a continuous hydrophobic layer impermeable to water and the low-molecular-mass salt dissolved in it.     

Hollow nanoparticles prepared from pH‐responsive template polymer micelles

Water‐soluble crosslinked hollow nanoparticles were prepared using pH‐responsive anionic polymer micelles as templates. The template micelles were formed from pH‐responsive diblock copolymers (PAMPS‐PAaH) composed of the poly(sodium 2‐(acrylamido)‐2‐methylpropanesulfonate) and poly(6‐(acrylamido)hexanoic acid) blocks in an aqueous acidic solution. The PAMPS and PAaH blocks form a hydrophilic anionic shell and hydrophobic core of the core‐shell polymer micelle, respectively. A cationic diblock copolymer (PEG‐P(APTAC/CEA)) with the poly(ethylene glycol) block and random copolymer block composed of poly((3‐acrylamidopropyl)trimethylammonium chloride) containing a small amount of the 2‐(cinnamoyl)ethylacrylate photo‐crosslinkable unit can be adsorbed to the anionic shell of the template micelle due to electrostatic interaction, which form a core‐shell‐corona three‐layered micelle. The shell of the core‐shell‐corona micelle is formed from a polyion complex with anionic PAMPS and cationic P(APTAC/CEA) chains. The P(APTAC/CEA) chains in the shell of the core‐shell‐corona micelle can be photo‐crosslinked with UV irradiation. The template micelle can be dissociated using NaOH, because the PAaH blocks are ionized. Furthermore, electrostatic interactions between PAMPS and PAPTAC in the shell are screened by adding excess NaCl in water. The template micelles can be completely removed by dialysis against water containing NaOH and NaCl to prepare the crosslinked hollow nanoparticles. Transmission electron microscopy observations confirmed the hollow structure. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A fluorescence emission study of the formation of induced premicelles in solutions of polyelectrolytes and ionic surfactants

The interactions between PSS-co-BVE copolymers and ionic surfactants (anionic and cationic) in aqueous solution have been investigated using pyrene as a photophysical probe. Static and dynamic fluorescence determinations have been used to obtain information about the microenvironments formed between both species. Micropolarity studies using the I1/I3 ratio of the vibronic bands of pyrene and the behavior of the I(E)/I(M) ratio between the monomer and excimer emissions show the formation of hydrophobic domains. The interactions between the polyelectrolytes and the oppositely charged surfactants lead to the formation of induced premicelles at surfactant concentrations lower than the cmc of the surfactants. This aggregation process is assumed to be due to electrostatic attraction. At the same concentration, the excimer-to-monomer emission ratio shows its first peak. At higher surfactant concentrations, near the cmc, micelles with the same properties as those found in pure aqueous solution are formed. On the other side, systems containing an anionic surfactant do not show this behavior at low concentrations. There is no apparent dependence of the cac on the composition of the polymer, reinforcing the assumption that the electrostatic interactions induce the formation of the premicelles. The values of the cac's follow the same trend as for the cmc's, DTAC>DTAB>CTAC. The polarity of the induced premicelles, as measured by the I1/I3 ratio, also indicates that the microdomains formed by the longer chain surfactants are more hydrophobic than those of the shorter chain surfactants, as also happens with real micelles.     

Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.     

Mixtures of hydrogenated and fluorinated lactobionamide surfactants with cationic surfactants: study of hydrogenated and fluorinated chains miscibility through potentiometric techniques

The work reported herein deals with the aqueous behavior of hydrocarbon and/or fluorocarbon ionic and nonionic surfactants mixtures. These mixtures were studied using potentiometric techniques in NaBr (0.1 mol L-1) aqueous solution as well as in pure water. Mixed micelles were formed from a cationic surfactant (dodecyl or tetradecyltrimethylammonium bromide respectively called DTABr or TTABr) and neutral lactobionamide surfactants bearing a hydrogenated dodecyl chain (H12Lac) or a fluorinated chain (CF3-(CF2)5-(CH2)2- or CF3-(CF2)7-(CH2)2-). We showed that concentrations of ionic and nonionic surfactants in the monomeric form as well as the composition of the mixed micelles can be specified thanks to a potentiometric technique. The complete characterization does not request any model of micellization a priori. The activities of the micellar phase constituents, as well as the free enthalpies of mixing, were calculated. The subsequent interpretation only relies on the experimental characterization. Comparison of the behaviors of the various systems with a model derived from the regular solution theory reveals the predominant part of electrostatic interactions in the micellization phenomenon. It also appears that the energy of interaction between hydrogenated and fluorinated chains is unfavorable to mixing and is of much lower magnitude than the electric charges interactions.     

Micellization of fluorinated amphiphiles

New cationic fluorinated surfactants and new types of fluorinated surfactants having fluorocarbon–hydrocarbon hybrids, dimeric and polymeric structure have been synthesized recently. Their synthesis requires many steps and consequently requires much time and high expense. Since the fluorinated surfactants have unusual molecular aggregation properties, ¹⁹F-NMR, novel fluorescence probes and cryo-transmission electron microscope techniques have been applied to study their aggregation behaviour in aqueous systems. Their unique characteristics are summarized as follows: (1) the dissolution process from solid state to dissolved aggregate state requires a very long time for the long chain fluorinated surfactants under thermodynamic equilibrium. The equilibration time can be reduced at higher temperatures; (2) interfacial properties and critical micelle concentration (CMC) are influenced by the nature of the hydrophobic terminal groups (CF₃− or HCF₂−); (3) the fluorocarbon functionality can make it possible even for single-chain amphiphiles to form vesicles or lamellar structures; (4) the hybrid surfactant made of both hydrocarbon and fluorocarbon chains showed a life time of 2.0×10⁻³ s for the exchange rate between the monomeric and the micellar states at the CMC and moreover, these detergents can cosolubilize fluorocarbon–hydrocarbon mixed solubilizates.     

Complexes of lysozyme with sodium (sulfamate‐carboxylate)isoprene/ethylene oxide double hydrophilic block copolymers

Complexes between sodium (sulfamate‐carboxylate)isoprene/ethylene oxide double hydrophilic block copolymers and lysozyme, a globular protein, were formed in aqueous solutions, at pH 7, because of electrostatic interactions between the anionic groups of the polyelectrolyte block of the copolymers and the cationic groups of lysozyme. The structure of the complexes was investigated as a function of the anionic/cationic charge ratio of the two components in solution and ionic strength by static, dynamic, and electrophoretic light scattering, atomic force microscopy, and fluorescence spectroscopy. The mass and size of the micellar‐like complexes depend on the mixing ratio and the molecular characteristics (molecular weight, composition, and architecture) of the copolymer used. Complexation persists at 0.15M NaCl, the value for physiological saline, as a result of additional hydrophobic interactions between the copolymers and the enzyme. Fluorescence spectroscopy measurements indicate that the secondary structure of lysozyme does not change substantially after complex formation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 509–520, 2007     

Evaluation of Organically Modified Layered Double Hydroxides as Fillers for the Preparation of Polymer Nanocomposites in Miniemulsion Polymerization

Latexes of poly(n‐butyl acrylate‐co‐methyl methacrylate) [P(BA‐co‐MMA)] filled with magnesium–aluminum layered double hydroxides (MgAl‐LDHs) are synthesized using miniemulsion polymerization. Three commercial LDHs organically modified with different types of anions are used as fillers (Perkalite F100S, Perkalite A100, and Perkalite AF50) and three different types of surfactants are tested to stabilize the miniemulsions including a cationic, an anionic, and a nonionic one. Stable LDH‐containing miniemulsions are prepared with a mixture of sodium dodecyl sulfate and Triton X‐405 and the polymerizable co‐stabilizer octadecyl acrylate. They are then polymerized to yield nanocomposite latexes. Depending on the type of LDH used, the presence of the inorganic material in the reaction medium affects the polymerization kinetics. X‐ray diffraction analysis of the resulting nanocomposite films suggests exfoliation of the inorganic material. The glass transition temperature of the nanocomposites is not affected by the LDHs and the decomposition temperature of the nanocomposites determined by thermogravimetric analysis is greater than that of the pure polymer.     

NMR studies on selectivity of beta-cyclodextrin to fluorinated/hydrogenated surfactant mixtures

The interactions between beta-cyclodextrin (beta-CD) and the equimolar/nonequimolar mixtures of sodium perfluorooctanoate (C(7)F(15)COONa, SPFO) and sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na, C(n)SO(4), n = 8, 10, 12) were investigated by 1H and 19F NMR. It showed that beta-CD preferentially included the fluorinated surfactant when exposed to mixtures of hydrogenated (C(n)SO(4)) and fluorinated (SPFO) surfactants, notwithstanding whether the hydrogenated surfactant C(n)SO(4) was more or less hydrophobic than the SPFO. Such preferential inclusion of the fluorinated surfactant continued to a certain concentration of beta-CD at which time the C(n)SO(4) was then observed to be included. The longer the hydrocarbon chain of C(n)SO(4) the lower the concentration of beta-CD at which the hydrogenated surfactants began to show inclusion. The inclusion process can be qualitatively divided into three stages: first, formation of 1:1 beta-CD/SPFO complexes; second, formation of 1:1 beta-CD/C(n)SO(4) complexes; and finally, formation of 2:1 beta-CD/SPFO complexes upon further increase of beta-CD concentration. In the concentration range studied, during the last stage of inclusion both 2:1 beta-CD/C(12)SO(4) and 2:1 beta-CD/SPFO complexes appear to be simultaneously formed in the system of beta-CD/SPFO/C(12)SO(4) but not in either the systems of beta-CD/SPFO/C(8)SO(4) or beta-CD/SPFO/C(10)SO(4). The selective inclusion of the shorter fluorocarbon chain surfactant might be attributed to the greater rigidity and size of the fluorocarbon chains, compared to those of the hydrocarbon chains, which provide for a tighter fit and better interaction between the host and guest. This latter effect appears to dominate the increase in hydrophobic character as the carbon chain length increases in the hydrogenated series.