A Self‐Assembly Phase Diagram from Amphiphilic Perylene Diimides

Supramolecular forces govern self‐assembly and further determine the final morphologies of self‐assemblies. However, how they control the morphology remains hitherto largely unknown. In this paper, we have discovered that the self‐assembled nanostructures of rigid organic semiconductor chromophores can be finely controlled by the secondary forces by fine‐tuning the surrounding environments. In particular, we used water/methanol/hydrochloric acid to tune the environment and observed five different phases that resulted from versatile molecular self‐assemblies. The representative self‐assembled nanostructures were nanotapes, nanoparticles and their 1D assemblies, rigid microplates, soft nanoplates, and hollow nanospheres and their 1D assemblies, respectively. The specific nanostructure formation is governed by the water fraction, R_w, and the concentration of hydrochloric acid, [HCl]. For instance, nanotapes formed at low [HCl] and R_w values, whereas hollow nanospheres formed when either the HCl concentration is high, or the water fraction is low, or both. The significance of this paper is that it provides a useful phase diagram by using R_w and [HCl] as two variables. Such a self‐assembly phase diagram maps out the fine control that the secondary forces have on the self‐assembled morphology, and thus allows one to guide the formation toward a desired nanostructure self‐assembled from rigid organic semiconductor chromophores by simply adjusting the two key parameters of R_w and [HCl].     

Self‐assembly behavior of amphiphilic linear‐block‐dendritic copolymers with long subchains: Dependences on dendron generation and mixing dynamics

Block copolymers composed of acrylic acid and methyl methacrylate with three topologies of double linear blocks, poly(acrylic acid) (PAA) linear block/poly(methyl methacrylate) (PMMA) G1‐dendron and PAA linear block/PMMA G2‐dendron have been prepared by the combination of atom transfer radical polymerization and azide–alkyne click reaction. Proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography have been adopted thoroughly to identify the chemical structure of those block copolymers with expected topologies. The self‐assembly of those block copolymers in the selective solvent has been performed through two mixing routes of gentle and abrupt variation in solvent selectivity, and the morphology of the obtained self‐assemblies/aggregates was observed by transmission electron microscopy. Because the abrupt variation route altered sharply the solvent quality during the mixing, the intermolecular association of polymer chains resulted in the smaller self‐assemblies but the further growth of smaller self‐assemblies was not observed. On the contrary, the gentle variation route changed gradually the solvent quality during the mixing, favoring not only the intermolecular association but also the further growth of self‐assemblies to result in larger aggregates. The final morphology of those assemblies/aggregates also exhibited the dependence of PMMA dendron generation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1446–1456     

Evidence of Self‐Aggregation of Cationic Surfactants in a Choline Chloride+Glycerol Deep Eutectic Solvent

Based on fluorescence probe, electrical conductivity, surface tension, small‐angle X‐ray/dynamic light scattering, and transmission electron microscopy experiments, we present the first clear lines of evidence for self‐aggregation of cationic surfactants of the n‐alkyltrimethylammonium family within an archetypical deep eutectic solvent comprised of a 1:2 molar mixture of choline chloride and glycerol. Estimated thermodynamic parameters suggest this self‐aggregation process to be less entropically driven than that in water. These novel water‐free self‐assemblies might serve as dynamic soft templates to direct the growth of size‐ or shape‐tailored nanoparticles within water‐restricted media.     

Pincushion of Tubule Discovery and Tubular Morphology Landscape Establishment of Block Copolymer Self‐Assemblies

Block copolymer (BCP) self‐assembly is a versatile technique in the preparation of polymeric aggregates with varieties of morphologies. However, its morphology library is limited. Here, the discovery of pincushion of tubules is reported for the first time, via BCP self‐assembly of poly(4‐vinylpyridine)‐b‐polystyrene (P4VP‐b‐PS) with very high molecular weight (500 kDa) and asymmetry (2 mol% P4VP). The investigation confirms the importance of core‐forming block length on morphology control of BCP self‐assemblies, especially with respect to tubular structures. The morphology landscape of tubular structures is successfully established, where dumbbell of tubule, tubule, loose clew of tubules, tight clew of tubules, and pincushion of tubules can be prepared by adjusting the core‐forming block length. This work therefore expands the structure library of BCP self‐assemblies and opens up a new avenue for the further applications of these tubular materials.     

Chain center‐functionalized amphiphilic block polymers: Complementary hydrogen bond self‐assembly in aqueous solution

Hydrogen bonding self‐assemblies were formed in an aqueous medium from a pair of an amphiphilic ABA triblock copolymer and a hydrophobic homopolymer, both with a triple hydrogen bonding site that was complementary to each other and precisely placed at the main‐chain center: (PEGMA)_m–(MMA)_n– ADA –(MMA)_n–(PEGMA)_m and (MMA)_p– DAD –(MMA)_p ( A = hydrogen acceptor; D = hydrogen donor; PEGMA: PEG methacrylate; MMA: methyl methacrylate). The polymers were synthesized by the ruthenium‐catalyzed living radial polymerization with bifunctional initiators (Br– ADA –Br and Cl– DAD –Cl) aiming at pinpoint chain center functionalization to give a symmetric segmental sequence; ADA and DAD initiators were derived from 2,6‐diaminopyridine and thymine, respectively. On mixed equimolar in tetrahydrofuran (THF), both polymers spontaneously associated, and the apparently 1:1 assembly further grew into higher aggregate particles on subsequent addition of water. The aggregates in water/THF were relatively stable and uniform in size, which most likely stems from the intermolecular complementary hydrogen bond interaction at polymer chain centers. In sharp contrast, an equimolar mixture of ADA ‐block polymer and DAD ‐free poly(MMA) in water/THF resulted in larger and irregular particles, and thus short‐lived to eventually collapse. These results indicate that, however structurally marginal, precise pinpoint functionalization of macromolecular chains allows stable self‐assemblies via complementary hydrogen bond interaction even in aqueous media. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4498–4504     

Crystallization‐Driven Asymmetric Helical Assembly of Conjugated Block Copolymers and the Aggregation Induced White‐light Emission and Circularly Polarized Luminescence

Controlling the self‐assembly morphology of π‐conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3‐hexylthiophene)‐block‐poly(phenyl isocyanide)s (P3HT‐b‐PPI) copolymers composed of π‐conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization‐driven asymmetric self‐assembly (CDASA) of the block copolymers lead to the formation of single‐handed helical nanofibers with controlled length, narrow dispersity, and well‐defined helicity. During the self‐assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single‐handed helical assemblies of the block copolymers exhibited interesting white‐light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.     

Temperature‐induced self‐assembly and metal‐ion stabilization of histidine functional block copolymers

Histidine functional block copolymers are thermally self‐assembled into polymer micelles with poly‐N‐isopropylacrylamide in the core and the histidine functionality in the corona. The thermally induced self‐assemblies are reversible until treated with Cu²⁺ ions at 50 °C. Upon treatment with 0.5 equivalents of Cu²⁺ relative to the histidine moieties, metal‐ion coordination locks the self‐assemblies. The self‐assembly behavior of histidine functional block copolymers is explored at different values of pH using DLS and ¹H NMR. Metal‐ion coordination locking of the histidine functional micelles is also explored at different pH values, with stable micelles forming at pH 9, observed by DLS and imaged by atomic force microscopy. The thermal self‐assembly of glycine functional block copolymers at pH 5, 7, and 9 is similar to the histidine functional materials; however, the self‐assemblies do not become stable after the addition of Cu²⁺, indicating that the imidazole plays a crucial role in metal‐ion coordination that locks the micelles. The reversibility of the histidine‐copper complex locking mechanism is demonstrated by the addition of acid to protonate the imidazole and destabilize the polymer self‐assemblies. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1964–1973     

Morphology of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) assemblies in diluted aqueous solution and gel studied by atomic force microscopy

Morphologies of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) triblock copolymer self‐assemblies in the diluted solution and in gel were studied by atomic force microscopy (AFM). The copolymer self‐assembled into wormlike aggregates, of uniform diameter, in water. The wormlike aggregates arranged in order to form separate clusters in the diluted copolymer solution; at a higher copolymer concentration, the clusters became bigger and bigger, and packed together to form gel. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of well‐defined,amphiphilic poly(N‐isopropylacrylamide)‐ b‐[2‐hydroxyethyl methacrylate‐poly(ϵ‐caprolactone)]n graft copolymers by RAFT polymerization and macromonomer method

The well‐defined, thermosensitive and biodegradable graft copolymers, poly(N‐isopropylacrylamide)‐b‐[2‐hydroxyethyl methacrylate‐poly(ε‐caprolactone)]_n (PNIPAAm‐b‐(HEMA‐PCL)_n) (n = 3 or 9), were synthesized by combining reversible addition‐fragmentation chain transfer polymerization and macromonomer method. The copolymers were able to self‐assemble into micelles in water with low critical micellar concentration and demonstrated temperature sensitivity with a lower critical solution temperature at around 36 °C. Transmission electron microscopy shows that the micelles exhibit a nanosized spherical morphology within a size range of 30–100 nm. The PNIPAAm‐b‐(HEMA‐PCL)₃ copolymer exhibited biodegradation and low cytotoxicity. The paclitaxel‐loaded PNIPAAm‐b‐(HEMA‐PCL)₃ micelles displayed thermosensitive controlled release behavior, which indicates potential as drug carriers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5354–5364, 2007     

On‐Surface Self‐Assembly of a C3‐Symmetric π‐Conjugated Molecule Family Studied by STM: Two‐Dimensional Nanoporous Frameworks

The on‐surface self‐assembled behavior of four C ₃‐symmetric π‐conjugated planar molecules ( Tp , T12 , T18 , and Ex ) has been investigated. These molecules are excellent building blocks for the construction of noncovalent organic frameworks in the bulk phase. Their hydrogen‐bonded 2D on‐surface self‐assemblies are observed under STM at the solid/liquid interface; these structures are very different to those in the bulk crystal. Upon combining the results of STM measurements and DFT calculations, the formation mechanism of different assemblies is revealed; in particular, the critical role of hydrogen bonding in the assemblies. This research provides us with not only a deep insight into the self‐assembled behavior of these novel functional molecules, but also a convenient approach toward the construction of 2D multiporous networks.     

Self‐assembly of polymer‐coated ferromagnetic nanoparticles into mesoscopic polymer chains

The self‐assembly of dispersed polymer‐coated ferromagnetic nanoparticles into micron‐sized one‐dimensional mesostructures at a liquid–liquid interface was reported. When polystyrene‐coated Co nanoparticles (19 nm) are driven to an oil/water interface under zero‐field conditions, long (≈ 5 μm) chain‐like assemblies spontaneously form because of dipolar associations between the ferromagnetic nanoparticles. Direct imaging of the magnetic assembly process was achieved using a recently developed platform consisting of a biphasic oil/water system in which the oil phase was flash‐cured within 1 s upon ultraviolet light exposure. The nanoparticle assemblies embedded in the crosslinked phase were then imaged using atomic force microscopy. The effects of time, temperature, and colloid concentration on the self‐assembly process of dipolar nanoparticles were then investigated. Variation of either assembly time t or temperature T was found to be an interchangeable effect in the 1D organization process. Because of the dependence of chain length on the assembly conditions, we observed striking similarities between 1D nanoparticle self‐assembly and polymerization of small molecule monomers. This is the first in‐depth study of the parameters affecting the self‐assembly of dispersed, dipolar nanoparticles into extended mesostructures in the absence of a magnetic field. © 2008 Wiley Periodicals, Inc.* J Polym Sci Part B: Polym Phys 46: 2267–2277, 2008     

Synthesis and Aggregation Behavior of meso‐Sulfinylporphyrins: Evaluation of S‐Chirality Effects on the Self‐Organization to S–Oxo‐Tethered Cofacial Porphyrin Dimers

The synthesis and aggregation behavior of meso‐sulfinylporphyrins are described. The copper‐catalyzed C–S cross‐coupling reaction of a meso‐iodoporphyrin with benzenethiol and n‐octanethiol has proved to be an efficient method for the synthesis of meso‐sulfanylporphyrins, which are oxygenated by m‐chloroperbenzoic acid to produce the corresponding meso‐sulfinylporphyrins. Optically active zinc meso‐sulfinylporphyrins were successfully isolated by means of optical resolution of the racemates on a chiral HPLC column. Zinc sulfinylporphyrins readily undergo self‐organization through S–oxo–zinc coordination to form cofacial porphyrin dimers in solution, in which the hetero‐ and homodimers are present as a diastereomeric mixture. The aggregation modes of the S–oxo‐tethered porphyrin dimers were fully characterized by ¹H NMR, IR, and UV/Vis spectroscopy as well as DFT calculations on their model compounds, thus revealing that the self‐aggregation behavior depends on the combination of S chirality. The absolute configurations at the sulfur center can be determined by the exciton‐coupled CD method. The observed self‐association constant for the S–oxo‐tethered dimerization of (S)‐phenylsulfinylporphyrin in toluene is larger than that in dichloromethane, which reflects the difference in dipole moments between the homodimer and the monomer. In cyclic and differential pulse voltammetry, the first oxidation process of the cofacial dimers is split into two reversible steps, which indicates that the initially produced π radical cations are delocalized efficiently between the two porphyrin rings. The present findings demonstrate the potential utility of meso‐sulfinyl groups as promising ligands for investigating the effects of peripheral chirality on the structures and optical and electrochemical properties of metal‐assisted porphyrin self‐assemblies.     

Water‐Soluble Molecular Capsules: Self‐Assembly and Binding Properties

The self‐assembly and characterization of water‐soluble calix[4]arene‐based molecular capsules ( 1?2 ) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b , functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2 . The formation of the molecular capsules is studied by ¹H NMR spectroscopy, ESI mass spectrometry (ESI‐MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self‐assembled capsule 1 a?2 . Experimental guest encapsulation studies indicate that capsule 1 a?2 is an effective host for both charged (N‐methylquinuclidinium cation) and neutral molecules (6‐amino‐2‐methylquinoline) in water.     

Synthesis,characterization, and electrical properties of nanostructural polyaniline doped with novel sulfonic acids (4‐{n‐[4‐(4‐nitrophenylazo)phenyloxy]alkyl}aminobenzene sulfonic acid)

4‐{n‐[4‐(4‐Nitrophenylazo)phenyloxy]alkyl}aminobenzene sulfonic acid (Cn‐ABSA, where n = 2, 4, 6, 8, or 10) as a novel dopant for conducting polymers of polyaniline (PANI) was designed and synthesized. The molecular structure of Cn‐ABSA was characterized with ¹H NMR, Fourier transform infrared, and secondary‐ion mass spectrometry. Nanostructures (nanotubes or nanorods) of PANI–(Cn‐ABSA) were successfully synthesized with a self‐assembly process in the presence of Cn‐ABSA as the dopant. The morphology (shape and size) and conductivity of the resulting nanostructures strongly depended on the number of alkyl groups (n) and, in particular, the addition of water before polymerization. The formed micelles of aniline/Cn‐ABSA/water were proposed to be templatelike in forming PANI–(Cn‐ABSA) nanostructures on the basis of the emulsion properties measured by dynamic light scattering. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3485–3497, 2001     

A roadmap for poly(ethylene oxide)‐block‐poly‐ε‐caprolactone self‐assembly in water: Prediction,synthesis, and characterization

Numerical self‐consistent field (SCF) lattice computations allow a priori determination of the equilibrium morphology and size of supramolecular structures originating from the self‐assembly of neutral block copolymers in selective solvents. The self‐assembly behavior of poly(ethylene oxide)‐block‐poly‐ε‐caprolactone (PEO‐PCL) block copolymers in water was studied as a function of the block composition, resulting in equilibrium structure and size diagrams. Guided by the theoretical SCF predictions, PEO‐PCL block copolymers of various compositions have been synthesized and assembled in water. The size and morphology of the resulting structures have been characterized by small‐angle X‐ray scattering, cryogenic transmission electron microscopy, and multiangle dynamic light scattering. The experimental results are consistent with the SCF computations. These findings show that SCF is applicable to build up roadmaps for amphiphilic polymers in solution, where control over size and shape are required, which is relevant, for instance, when designing spherical micelles for drug delivery systems © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 330–339     

Controlled Self‐Assembly by Mono‐p‐sulfonatocalix[n]arenes and Bis‐p‐sulfonatocalix[n]arenes

The complexation‐induced critical aggregation concentrations of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes (n=4, 5) were systemically measured by fluorescence spectroscopy. In all cases, the complexation‐induced critical aggregation concentration decreases by about 3 times upon addition of p‐sulfonatocalix[n]arenes. However, the optimal molar ratios for the aggregation of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes are distinctly different: For mono‐p‐sulfonatocalix[n]arenes, the optimum mixing ratio for the aggregation of 1‐pyrenemethylaminium is 1:4 mono‐p‐sulfonatocalix[n]arenes/1‐pyrenemethylaminium, whereas only 2.5 molecules of 1‐pyrenemethylaminium can be bound by one cavity of bis‐p‐sulfonatocalix[n]arenes. The intermolecular complexation of mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes with 1‐pyrenemethylaminium led to the formation of two distinctly different nanoarchitectures, which were shown to be nanoscale vesicle and rod aggregates, respectively, by using dynamic laser scattering, TEM, and SEM. This behavior is also different from the fiber‐like aggregates with lengths of several micrometers that were formed by 1‐pyrenemethylaminium itself above its critical aggregation concentration. Furthermore, the obtained nanoaggregates exhibit benign water solubility, self‐labeled fluorescence, and, more importantly, temperature responsiveness.     

Near‐Infrared‐Emissive Amphiphilic BODIPY Assemblies Manipulated by Charge‐Transfer Interaction: From Nanofibers to Nanorods and Nanodisks

A novel near‐infrared (NIR)‐emissive amphiphilic BODIPY derivative, BBDP, was successfully prepared and thoroughly characterized. The photophysical properties in various organic solvents and THF/H₂O mixtures with different fractions of water were investigated. BBDP self‐assembled into nanofibers in a water environment owing to its amphiphilic properties. Through charge‐transfer interactions, BBDP co‐assembled with a perylene bisimide derivative, PBI, and a viologen derivative, MV, to generate two superamphiphiles. These two superamphiphiles were able to aggregate in water media at appropriate concentrations. The BBDP–PBI charge‐transfer complex formed nanorods, whereas the BBDP–MV aggregates expressed a disk‐like morphology. This research paves the way for us to manipulate the morphology of dye assemblies.     

Recent advances in the solution self‐assembly of amphiphilic “rod‐coil” copolymers

Solution self‐assembly of amphiphilic “rod‐coil” copolymers, especially linear block copolymers and graft copolymers (also referred to as polymer brushes), has attracted considerable interest, as replacing one of the blocks of a coil‐coil copolymer with a rigid segment results in distinct self‐assembly features compared with those of the coil‐coil copolymer. The unique interplay between microphase separation of the rod and coil blocks with great geometric disparities can lead to the formation of unusual morphologies that are distinctly different from those known for coil‐coil copolymers. This review presents the recent achievements in the controlled self‐assembly of rod‐coil linear block copolymers and graft copolymers in solution, focusing on copolymer systems containing conjugated polymers, liquid crystalline polymers, polypeptides, and polyisocyanates as the rod segments. The discussions concentrate on the principle of controlling over the morphology of rod‐coil copolymer assemblies, as well as their distinctive optical and optoelectronic properties or biocompatibility and stimuli‐responsiveness, which afford the assemblies great potential as functional materials particularly for optical, optoelectronic and biological applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1459–1477     

Morphology‐Dependent Cell Imaging by Using a Self‐Assembled Diacetylene Peptide Amphiphile

Herein, a novel cationic peptide gemini amphiphile containing diacetylene motifs ( DA₂P ) is presented, which self‐assembles into novel tadpole‐ and bola‐shaped nanostructures at low concentrations and nanofibers at higher concentrations. Interestingly, the DA₂P assemblies can be polymerized into a fluorescent red phase but only during incubation with HeLa cells, most likely owing to the reorganization of the diacetylene chains of DA₂P upon interaction with the cell membrane. The red‐fluorescent polymerized DA₂P assemblies can serve as a novel cell imaging probe. However, only vesicles, tadpole‐ and bola‐shaped DA₂P assemblies can be translocated into HeLa cells, whereas the nanofiber‐like DA₂P assemblies are trapped by the cell membranes and do not enter the cells. Hence, morphology‐dependent cell imaging is observed.     

p‐Quaterphenylene as an Aggregation‐Induced Emission Fluorogen in Supramolecular Organogels and Fluorescent Sensors

Two dumbbell‐shaped organogelators with a p ‐quaterphenylene core were synthesized, and their self‐assembly properties were investigated. These low‐molecular‐weight gelators could form self‐supporting gels in many apolar organic solvents with an H‐type aggregation form through a synergic effect of π–π stacking, intermolecular translation‐related hydrogen bonding, and van der Waals forces. In comparison to the p ‐terphenylene‐cored gelator, the extended π‐conjugated segment improved the gelation efficiency significantly with enhanced gelation rate. Additionally, these p ‐quaterphenylene‐centered gelators exhibited strong fluorescence emission induced by aggregation, which not only provided an in situ method to optically monitor the gelation process, but also endowed these self‐assemblies with substantial applications in sensing explosives.