Aptamer‐functionalized Fe3O4 magnetic nanoparticles as a solid‐phase extraction adsorbent for the selective extraction of berberine from Cortex phellodendri

The extraction adsorbent was fabricated by immobilizing the highly specific recognition and binding of aptamer onto the surface of Fe₃O₄ magnetic nanoparticles, which not only acted as recognition elements to recognize and capture the target molecule berberine from the extract of Cortex phellodendri , but also could favor the rapid separation and purification of the bound berberine by using an external magnet. The developed solid‐phase extraction method in this work was useful for the selective extraction and determination of berberine in Cortex phellodendri extracts. Various conditions such as the amount of aptamer‐functionalized Fe₃O₄ magnetic nanoparticles, extraction time, temperature, pH value, Mg²⁺ concentration, elution time and solvent were optimized for the solid‐phase extraction of berberine. Under optimal conditions, the purity of berberine extracted from Cortex phellodendri was as high as 98.7% compared with that of 4.85% in the extract, indicating that aptamer‐functionalized Fe₃O₄ magnetic nanoparticles‐based solid‐phase extraction method was very effective for berberine enrichment and separation from a complex herb extract. The applicability and reliability of the developed solid‐phase extraction method were demonstrated by separating berberine from nine different concentrations of one Cortex phellodendri extract. The relative recoveries of the spiked solutions of all the samples were between 95.4 and 111.3%, with relative standard deviations ranging between 0.57 and 1.85%.     

Electrochemiluminescence Aptasensor for the MUC1 Protein Based on Multi‐functionalized Graphene Oxide Nanocomposite

The electrochemiluminescence (ECL) aptasensor was prepared for the detection of Mucin 1 based on its specific recognition by aptamer immobilized on multi‐functionalized graphene oxide nanocomposite, which was prepared with N‐(4‐aminobutyl)‐N‐ethylisoluminol (ABEI) and aptamer chemically bound to the surface of magnetic GO (nanoFe₃O₄@GO). ABEI and aptamer acted as the electrochemiluminophore and the capture device for Mucin 1 respectively. NanoFe₃O₄@GO brought multi‐functionalized graphene oxide nanocomposite attracted on the surface of magnetic glass carbon electrode through magnetism, enabled all the ABEI immobilized electrochemically active due to its good conductivity and thus then facilitated the sensitive detection of Mucin 1. In addition, the ECL aptasensor can be prepared through a one‐step process. Under optimal conditions, the ECL intensity of the aptasensor decreased proportionally to the logarithmic concentrations of Mucin 1 in the range of 0.005–1000 ng mL^?1. This aptasensor displays good specificity, stability, reproducibility and application. This method has a large potential because such a multi‐functionalized graphene oxide nanocomposite also may be applied to other ECL‐based aptasensors.     

Label‐free Electrochemical Aptasensor for Carcino‐embryonic Antigen Based on Ternary Nanocomposite of Gold Nanoparticles,Hemin and Graphene

In this report, a label‐free electrochemical aptasensor for carcino‐embryonic antigen (CEA) was successfully developed based on a ternary nanocomposite of gold nanoparticles, hemin and graphene nanosheets (AuNPs‐HGNs). This nanocomposite was prepared by decorating gold nanoparticles on the surface of hemin functionalized graphene nanosheets via a simple wet‐chemical strategy. The aptamer can be assembled on the surface of AuNPs‐HGNs/GCE (glassy carbon electrode) through Au‐S covalent bond to form the sensing interface. Hemin absorbed on the graphene nanosheets not only acts as a protective agent of graphene sheets, but also as an in situ probe base on its excellent redox properties. Gold nanoparticles provide with both numerous binding sites for loading CEA binding aptamer (CBA) and good conductivity to promote the electron transfer. The current changes, which are caused by CEA specifically binding on the modified electrode, are exploited for the label‐free detection of CEA in a very rapid and convenient protocol. Therefore, the method has advantages of high sensitivity, wide linear range (0.0001–10 ng mL^?1), low detection limit (40 fg mL^?1) and attractive specificity. The results illustrate that the proposed label‐free electrochemical aptasensor has a potential application in the biological or clinical target analysis for its simple operation and low cost.     

Influence of borohydride concentration on the synthesized Au/graphene nanocomposites for direct borohydride fuel cell

Au/graphene nanocomposites are prepared via a one-pot chemical reduction process at room temperature, using graphene oxide (GO) and chloroauric acid (HAuCl₄) as precursors. The obtained Au/graphene nanocomposites are characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). TEM shows that the Au nanoparticles with size of approximately 8.7 nm disperse randomly on the surface of graphene. XPS confirms that the Au/graphene nanocomposites show a higher atomic percentage of C/O (6.3/1), in contrast to its precursor GO (2.2/1). Electrochemical studies reveal that the Au/graphene nanocomposites have electrochemically active surface area of 9.82 m² g^?1. Besides, the influence of borohydride concentration on the as-prepared Au/graphene nanocomposites is investigated in details by cyclic voltammetry, chronoamperometry, and chronopotentiometry. The results indicate that high concentration of borohydride can significantly improve the electrochemical performance of the Au/graphene catalyst.     

Solid‐phase purification and extraction for the determination of trace neonicotinoid pesticides in tea infusion

An analytical protocol that includes solid‐phase purification and extraction is successfully developed for the determination of trace neonicotinoid pesticides in tea infusion. The method consists of a purification on amino‐functionalized mesoporous silica SBA‐15 followed by a solid‐phase extraction based on graphene oxide before ultra high performance liquid chromatography with tandem mass spectrometry analysis. Parameters that significantly affected the extraction of the neonicotinoids onto graphene oxide, such as the amount of adsorbent, extraction time, pH, elution solvent, etc. were optimized. The amino‐functionalized mesoporous silica SBA‐15 has been proved to be an efficient adsorbent for removal of polyphenols especially catechins from tea infusion. Graphene oxide exhibits a very rapid adsorption rate (within 10 min) and high adsorption capacities for neonicotinoids at low initial concentration (0.01–0.5 mg/L). The analysis method gave a good determination coefficient (r² > 0.99) for each pesticide and high recoveries in the range of 72.2–95.0%. Powder X‐ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV‐vis spectroscopy were utilized to identify the structure and morphology of graphene oxide. The adsorption driving force of neonicotinoids on graphene oxide mainly depends on π–π electron donor–acceptor interaction and electrostatic interaction.     

Electrochemiluminescence Immunosensor Based on Functionalized Graphene/Fe3O4‐Au Magnetic Capture Probes for Ultrasensitive Detection of Tetrodotoxin

An ultrasensitive electrochemiluminescence (ECL) immunosensor for the detection of tetrodotoxin (TTX) is proposed, which are composed of the branched poly‐(ethylenimine) (BPEI) functionalized graphene (BGNs)/Fe₃O₄‐Au magnetic capture probes and luminol‐capped gold nanocomposites (luminol‐AuNPs) as the signal tag. Herein, a typical sandwich immunecomplex was constructed on the glassy carbon electrode. The BGNs/Fe₃O₄‐Au hybrids could efficiently conjugate primary antibody via the Au−S chemical bonds or Au−N chemical bonds and rapidly separate under external magnetic field. The introduction of BPEI to GO could enhance the luminol‐ECL intensity. Meanwhile, the multifunctional nanocomposites have been proved with good water‐solubility, excellent electron transfer, outstanding stability, etc. The luminescent luminol‐AuNPs, a high efficient electrochemiluminescence marker, can be assembled on the second antibody, which can produce the ECL signal to achieve the determination of TTX. This proposed ECL immunosensor with a linear range from 0.01–100 ng/mL can be applied in the detection of TTX in real samples with satisfactory results.     

Enhanced Peroxidase‐Like Properties of Graphene–Hemin‐Composite Decorated with Au Nanoflowers as Electrochemical Aptamer Biosensor for the Detection of K562 Leukemia Cancer Cells

Graphene composites with hemin and gold nanoparticles show a better performance for hydrogen peroxide decomposition compared to that of the three components alone or duplex/hybrid complexes. Our previous studies showed that the morphology of the Au nanoparticles may greatly influence the catalytic activity of graphene‐family peroxidase mimics. Recently, we found that Au nanoflowers could grow in situ and form on the surface of hemin/RGO (reduced graphene oxide). The prickly morphology of this Au nanoflower brought a higher catalytic ability with enhanced kinetic parameters than traditional Au nanoparticles that showed a smooth surface. Therefore, based on this discovery, a smart electrochemical aptamer biosensor for K562 leukemia cancer cells was further presented with good performance in selectivity and sensitivity attributed to the excellent mimetic peroxidase catalytic activity of this newly synthesized Au nanoflower decorated graphene–hemin composite (H‐RGO‐Au NFs).     

One‐pot synthesis of magnetic zeolitic imidazolate framework/grapheme oxide composites for the extraction of neonicotinoid insecticides from environmental water samples

Magnetic zeolitic imidazolate framework 67/graphene oxide composites were synthesized by one‐pot method at room temperature for the first time. Electrostatic interactions between positively charged metal ions and both negatively charged graphene oxide and Fe₃O₄ nanoparticles were expected to chemically stabilize magnetic composites to generate homogeneous magnetic products. The additional amount of graphene oxide and stirring time of graphene oxide, Co²⁺, and Fe₃O₄ solution were investigated. The zeolitic imidazolate framework 67 and Fe₃O₄ nanoparticles were uniformly attached on the surface of graphene oxide. The composites were applied to magnetic solid‐phase extraction of five neonicotinoid insecticides in environmental water samples. The main experimental parameters such as amount of added magnetic composites, extraction pH, ionic strength, and desorption solvent were optimized to increase the capacity of adsorbing neonicotinoid insecticides. The results show limits of detection at signal‐to‐noise ratio of 3 were 0.06–1.0 ng/mL under optimal conditions. All analytes exhibited good linearity with correlation coefficients of higher than 0.9915. The relative standard deviations for five neonicotinoid insecticides in environmental samples ranged from 1.8 to 16.5%, and good recoveries from 83.5 to 117.0% were obtained, indicating that magnetic zeolitic imidazolate framework 67/graphene oxide composites were feasible for analysis of trace analytes in environmental water samples.     

DNA Electrochemical Aptasensor for Detecting Fumonisins B1 Based on Graphene and Thionine Nanocomposite

In this paper, a novel aptasensor was designed by with the dual amplification of Au nanoparticles (AuNPs) and graphene/thionine nanocomposites (GS‐TH) for sensitive determination of fumonisins B₁ (FB₁). AuNPs is modified at the electrode surface to increase the electrical conductivity and fabricate specific recognition interface for FB₁ through the hybridization of capture DNA and its aptamer. Large number of TH molecules were loaded at the surface of graphene sheet to served as electrochemical probe and increase its electrochemical signal due to the excellent conductivity and large surface area of graphene sheet. This type of nanocomposites is then assembled to the single strand section of FB₁ aptamer at electrode surface by π–π stacking interactions between them, leading to an enhanced electrochemical signal. After the specific combination between FB₁ aptamer and its target (FB₁) in solution, GS–TH was released from electrode surface, resulting in a decreased electrochemical signal. The result demonstrated that the decreased currents were proportional to the FB₁ concentration in the range of 1–10⁶ pg/mL with a detection limit of 1 pg/mL. Besides, the developed aptasensor was also applied successfully for the determination of FB₁ in feed samples. The result shows this aptasensor has a higher sensitivity and selectivity.     

Magnetic solid‐phase extraction of brominated flame retardants from environmental waters with graphene‐doped Fe3O4 nanocomposites

Graphene‐doped Fe₃O₄ nanocomposites were prepared by a solvothermal reaction of an iron source with graphene. The nanocomposites were characterized by transmission electron microscopy, atomic force microscopy, X‐ray diffraction, superconducting quantum interference, Raman spectroscopy, Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy. This nanomaterial has been used as a magnetic solid‐phase extraction sorbent to extract trace brominated flame retardants from environmental waters. Various extraction parameters were optimized including dosage and reusability of the nanocomposites, and pH of sample matrix. The reliability of the magnetic solid‐phase extraction protocol based on graphene‐doped Fe₃O₄ nanocomposites was evaluated by investigating the recoveries of 2,4,6‐tribromophenol, tetrabromobisphenol A, 4‐bromodiphenyl ether, and 4,4?‐dibromodiphenyl ether in water samples. Good recoveries (85.0–105.0%) were achieved with the relative standard deviation ranging from 1.1–7.1%. Moreover, it is speculated from characterization and magnetic solid‐phase extraction experiment that there is not only π–π stacking but also possible hydrophobic interaction between the graphene‐doped Fe₃O₄ nanocomposites and analytes.     

Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

SO3H‐functionalized nano‐MGO‐D‐NH2: Synthesis,characterization and application for one‐pot synthesis of pyrano[2,3‐d]pyrimidinone and tetrahydrobenzo[b]pyran derivatives in aqueous media

An SO₃H‐functionalized nano‐MGO‐D‐NH₂ catalyst has been prepared by multi‐functionalization of a magnetic graphene oxide (GO) nanohybrid and evaluated in the synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3‐d]pyrimidinone derivatives. The GO/Fe₃O₄ (MGO) hybrid was prepared via an improved Hummers method followed by the covalent attachment of 1,4‐butanesultone with the amino group of the as‐prepared polyamidoamine‐functionalized MGO (MGO‐D‐NH₂) to give double‐functionalized magnetic nanoparticles as the catalyst. The prepared nanoparticles were characterized to confirm their synthesis and to precisely determine their physicochemical properties. In summary, the prepared catalyst showed marked recyclability and catalytic performance in terms of reaction time and yield of products. The results of this study are hoped to aid the development of a new class of heterogeneous catalysts to show high performance and as excellent candidates for industrial applications.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Magnetic GO‐PANI decorated with Au NPs: A highly efficient and reusable catalyst for reduction of dyes and nitro aromatic compounds

Due to the high activity of Au nanoparticles (NPs) for various reactions, many researchers have tried to develop heterogeneous catalysts in order to prevent irreversible agglomeration of Au NPs. Herein, magnetic graphene oxide modified with polyaniline (PANI) was used as a support for Au NPs that brings together advantages including: uniform dispersal of the catalyst in water,alarge surface area related to the graphene oxide; easy electron transfer in chemical reactions and good attachment of Au NPs to the support associated with PANI; and finally facile recovery in the presence of a magnetic field. Catalytic reduction of different analytes (Congo red, methylene blue, rhodamine B and 4‐nitro phenol) was evaluated in the presence of NaBH₄ and the results show high catalytic activity of the catalyst. The catalyst was thoroughly characterized using various methods including FTIR, XRD, XPS, FE‐SEM and HRTEM analyses while its catalytic activity was evaluated via reduction of different analytes.     

Electrochemical Biosensor Utilizing Supramolecular Association of Enzyme on Sol−gel Matrix Embedded Gold Nanoparticles Supported Reduced Graphene Oxide−cyclodextrin Nanocomposite

Herein we present β‐cyclodextrin (CD)‐functionalized reduced graphene oxide (RGO) nanosheets supported on silicate sol‐gel matrix‐embedded gold nanoparticles (Au NPs) modified electrode as a new affinity binding nanocomposite. The modified electrode is fabricated through layer‐by‐layer drop casting followed by immobilization of chemically modified enzyme conjugate (horse radish peroxidase (HRP)?adamantane carboxylic acid (ADA)). This affinity system is based on the supramolecular association between CDs and HRP?ADA and is mimicking the biological avidin?biotin interactions. CDs‐functionalized RGO (RGO?CD) functions as a macrocyclic host to form stable supramolecular inclusion complexes with enzyme conjugate. Besides Au NPs improve the interfacial interaction with RGO?CD nanosheets, and thus exhibit synergistic electrocatalytic effect toward H₂O₂ reduction in the presence of 1 mM hydroquinone.     

Graphene oxide-thionine-Au nanostructure composites: Preparation and applications in non-enzymatic glucose sensing

Herein, we demonstrated a facile strategy for preparing high-loading Au nanoparticles using thionine functionalized graphene oxide as the supporting material. Glassy carbon electrodes modified with the as-obtained nanocomposites showed remarkably electrocatalytic activity towards the oxidation of glucose, leading to an enzymeless glucose sensor with a wide linear range and a lower detection limit of 0.05 μmol/L.     

Bacitracin‐Conjugated Superparamagnetic Iron Oxide Nanoparticles: Synthesis,Characterization and Antibacterial Activity

Bacitracin‐conjugated superparamagnetic iron oxide (Fe₃O₄) nanoparticles were prepared by click chemistry and their antibacterial activity was investigated. After functionalization with hydrophilic and biocompatible poly(acrylic acid), water‐soluble Fe₃O₄ nanoparticles were obtained. Propargylated Fe₃O₄ nanoparticles were then synthesized by carbodiimide reaction of propargylamine with the carboxyl groups on the surface of the iron oxide nanoparticles. By further reaction with N₃‐bacitracin in a Cu^I‐catalyzed azide–alkyne cycloaddition, the magnetic Fe₃O₄ nanoparticles were modified with the peptide bacitracin. The functionalized magnetic nanoparticles were characterized by powder X‐ray diffraction, X‐ray photoelectron spectroscopy, TEM, zeta‐potential analysis, FTIR spectroscopy and vibrating‐sample magnetometry. Cell cytotoxicity tests indicate that bacitracin‐conjugated Fe₃O₄ nanoparticles show very low cytotoxicity to human fibroblast cells, even at relatively high concentrations. In view of the antibacterial activity of bacitracin, the biofunctionalized Fe₃O₄ nanoparticles exhibit an antibacterial effect against both Gram‐positive and Gram‐negative organisms, which is even higher than that of bacitracin itself. The enhanced antibacterial activity of the magnetic nanocomposites allows the dosage and the side effects of the antibiotic to be reduced. Due to the antibacterial effect and magnetism, the bacitracin‐functionalized magnetic nanoparticles have potential application in magnetic‐targeting biomedical applications.     

Covalently bonded aptamer‐functionalised magnetic mesoporous carbon for high‐efficiency chloramphenicol detection

A novel aptamer‐modified magnetic mesoporous carbon was prepared to develop a specific and sensitive magnetic solid‐phase extraction method through combination with ultra‐high performance liquid chromatography‐tandem mass spectrometry for the analysis chloramphenicol in complex samples. More specifically, the chloramphenicol aptamer‐modified Mg/Al layered double hydroxide magnetic mesoporous carbon was employed as a novel magnetic solid‐phase extraction sorbent for analyte enrichment and sample clean‐up. The extraction solvent, extraction time, desorption solvent, and desorption time were investigated. It was found that the mesoporous structure and aptamer‐based affinity interactions resulted in acceptable selective recognition and a good chemical stability toward trace amounts of chloramphenicol. Upon combination with the ultra‐high performance liquid chromatography‐tandem mass spectrometry technique, a specific and sensitive recognition method was developed with a low limit of detection (0.94 pmol/L, S/N = 3) for chloramphenicol analysis. The developed method was successfully employed for the determination of chloramphenicol in complex serum, milk powders, fish and chicken samples, giving recoveries of 87.0‐107% with relative standard deviations of 3.1‐9.7%.     

Enhanced Electrocatalytic Activity of Dual Template Based Pt/Cu‐zeolite A/Graphene for Methanol Electrooxidation

A novel Pt/Cu‐zeolite A/graphene based electrocatalyst was successfully prepared by chemical reduction method for methanol electrooxidation. Graphite oxide and Cu functionalized zeolite A were simultaneously reduced by NaBH₄ to prepare Cu‐zeolite A/graphene support which was used to deposit Pt nanoparticles. The nanostructure and composition of as‐prepared Pt/Cu‐zeolite A/graphene composites were characterized by X‐ray diffractometer, X‐ray fluorescence, Fourier transform infrared spectrometer and scanning electron microscopy. The electrocatalytic properties of Pt/Cu‐zeolite A/graphene modified electrode for methanol oxidation were investigated by cyclic voltammetry and chronoamperometry in 0.10 mol/L H₂SO₄ + 0.50 mol/L CH₃OH solution. Compared with Pt/zeolite A/graphene electrode and Pt/graphene electrode, Pt/Cu‐zeolite A/graphene based electrode exhibited obviously enhanced current and higher electrocatalytic activity for methanol electrooxidation. The increased electrocatalytic activity was attributed to the presence of zeolite A and reduced graphene oxide based dual template, which significantly increased the effective electrode surface and facilitated the diffusion of analytes into the electroactive catalyst.     

Effective extraction and simultaneous determination of Sudan dyes from tomato sauce and chili‐containing foods using magnetite/reduced graphene oxide nanoparticles coupled with high‐performance liquid chromatography

A simple, effective, and robust magnetic solid‐phase extraction method was developed using magnetite/reduced graphene oxide nanoparticles as the adsorbent for the simultaneous determination of Sudan dyes (I, II, III, and IV) in foodstuffs. The magnetite/reduced graphene oxide nanoparticles were characterized by X‐ray diffraction, scanning electron microscopy, and vibrating sample magnetometry. The extraction parameters including extraction time, elution solution, and elution time and volume were investigated in detail. Such magnetite/reduced graphene oxide nanoparticles based magnetic solid‐phase extraction in combination with high‐performance liquid chromatography and variable wavelength detection gave the detection limits of 3–6 μg/kg for Sudan I–IV in chili sauce, tomato sauce, chili powder, and chili flake samples. The recoveries were 79.6–108% at three spiked levels with the intra‐ and inter‐day relative standard deviations of 1.2–8.6 and 4.5–9.6%, respectively. The feasibility was further performed by a comparison with commercial alumina‐N. This method is suitable for the routine analysis of Sudan dyes due to its sensitivity, simplicity, and low cost.